Maple Leaf Airsoft

Compared to the Autobot, this hop up rubber is far stronger and has a flatter shaped contact patch inside. 

An absolute monster of an upgrade to make to your weapon. The external surface is ribbed to keep your inner barrel more stable inside your hop up unit with next to no play at all after you have fully re-assembled your Airsoft weapon.

A high quality replacement Hop up rubber, made to 50 degrees of hardness, and designed for VSRs, as well as KJW and WE Airsoft designs.

A high quality replacement Hop up rubber, made to 70 degrees of hardness, and designed for VSRs, as well as KJW and WE Airsoft designs.

A high-quality silicone hop rubber designed to replace the current hop rubber in your weapon. This particular hop rubber is made to be compatible with all standard AEG-type barrels and hop units.

Maple Leaf has quickly risen to become the market leader in HOP-up rubbers and inner barrels, and the Maple Leaf Macaron bucking is no exception. The design of the Macaron bucking features a narrower entrance to help the BB feed in a consistent spot with each cycle, and a contact patch with a refined shape intended to provide more consistent lift across the entire upper surface of the BB for greater accuracy than standard HOP buckings.

If you have ever spotted a vulnerable target, raised your Airsoft sniper rifle and gently squeezed the trigger and had nothing come out, you will understand the need for a way to monitor your ammo levels when sniping on the Airsoft field. Maple Leaf have the answer to our prayers, right here! The Transparent Magazine for the VSR-10 is constructed from a transparent polymer, allowing you to verify that your magazine is fully loaded before putting it into your mag pouch, and also allows you to quickly check how many BBs you have remaining through the clear witness window on the magazine's base. Never shoot blanks again with this mag!

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

If you want your sidearm to be capable of really reaching out, a HOP-up upgrade should be top of your list! The Maple Leaf HOP-up Chamber for VFC/WE/TM EU-Series GBB is constructed from alloy and supplied with a steel HOP-up arm and aluminium "I-key" style tensioner, promising tighter tolerances than the stock HOP-up unit which should translate to better air seal qualities, consistency and thus better accuracy downrange.

This set is compatible with VFC, WE and Tokyo Marui EU-series GBB pistols but should also fit most Tokyo Marui clone EU-series pistols, though as always, we recommend upgrade parts only for the knowledgeable and confident!

If you want to upgrade your Umarex Glock and build a sleeper of a long ranged pistol setup, this is the HOP-up unit you need! The Maple Leaf HOP-Up Chamber for Umarex/VFC Glock is compatible with the Umarex/VFC Glock 17, Glock 19, Glock 19X and Glock 45 GBB pistols and is constructed from alloy for improved strength. The unit is supplied with two HOP-up arms with one pre-installed, giving you a spare to keep handy or modify for some experimental HOP-up setups. 

The tolerances of this unit are far more precise than the original, offering better air seal and gas efficiency, translating into better effect on target and better consistency. If you want to shock the enemy by landing a hit with your pistol at long range, the Maple Leaf HOP-Up Chamber for Umarex/VFC Glock is the key!

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

A new unique range of barrels by Maple Leaf designed to produce consistent air flow and pressure behind every BB as it leaves the barrel.

A pre-built drop in hop-up unit and barrel set up built by Maple Leaf with their best parts already included in it. The kit can be dropped into any Tokyo Marui / KJ Works M1911 / MEU Series gas blowback Airsoft pistol for instant results. The set includes an alloy Hop-Up unit, 60 Degree hop-up rubber and Crazy Jet Inner barrel for high performance and improved accuracy. This is perfect for those who are looking to upgrade their pistol with minimum effort.

An aftermarket upgrade/replacement Inner Barrel and HOP Unit/Rubber for Hi-Capa Series Airsoft Pistols, specifically the Army Armament R601. This awesome package provides you with a Precision 6.02mm Inner Barrel, as well as a HOP Chamber, ML 70° Bucking and 'I-Key Delayer', to improve range, accuracy and precision.

The installation of this unit is relatively straightforward, and will be compatible with beginner/experienced techs.

The Maple Leaf Delayer OMEGA Nub is a HOP UP Rubber Nub For Airsoft Hop Up Units, it matches the shape of the BB to increase accuracy and overall performance of your airsoft gun. The nub gives more contact area to the BB and provides a precise amount of pressure around the BB instead of just on the top.

Maple Leaf has quickly risen to become the market leader in HOP-up rubbers and inner barrels, and the Maple Leaf Decepticon bucking is no exception. The design of the Decepticon bucking features a narrower entrance to help the BB feed in a consistent spot with each cycle, and a contact patch with a refined shape intended to provide more consistent lift across the entire upper surface of the BB for greater accuracy than standard HOP buckings. This particular bucking is made from silicone, offering greater resistance to temperature changes than rubber equivalents, making it especially useful for a gas blowback rifle or accurized GBB pistol.

The external surface is ribbed to keep your inner barrel more stable inside your hop up unit with next to no play at all after you have fully re-assembled your Airsoft weapon. 

A high quality 60 Degree silicone hop rubber designed to replace the current hop rubber in you weapon. This particular hop rubber is made to be compatible with all standard AEG type barrels and hop units.

A high quality 50 Degree silicone hop rubber designed to replace the current hop rubber in you weapon. This particular hop rubber is made to be compatible with all standard AEG type barrels and hop units.

The Maple Leaf Autobot HOP-up rubber has gained a reputation as one of the best upgrade components if you want to extend the range and improve the accuracy of a TM based GBB pistol, VSR/bar-10 sniper rifle, or GBBR with TM GBB HOP-up bucking compatibility. The Autobot has a wide and flat contact patch to help stabilise your BB in flight and extend your range. This bucking is also designed to ensure your BB is chambered consistently with every shot, guaranteeing impressive accuracy when compared to standard HOP-up buckings. This is the latest variant of the Autobot and is constructed from silicone instead of standard rubber, offering greater resistance to temperature changes.

A 50 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

If you are looking for more consistency, accuracy and range from your setup you can trust Maple Leaf to provide you with the best solution! The Super Hop Rubber is a refined design based on the TM Pistol and VSR-10 HOP pattern, but with a widened contact area to provide a greater HOP-up effect, spread more evenly across the upper surface of the BB to provide a more consistent and straight trajectory.

Maple Leaf has quickly risen to become the market leader in HOP-up rubbers and inner barrels, and the Maple Leaf Wonder Bucking is the latest of their mould-breaking designs. The Wonder HOP-up bucking is designed with tighter groupings in mind, with a wide "r-hop" style contact patch and stabilising wings on either side. The Wonder sacrifices all-out range over the excellent Maple Leaf "Super" series of HOP-up rubber for greater precision and tighter shot-to-shot groupings, making it perfect for a setup with an emphasis on accuracy. 

A 50 degree AEG hop rubber for standard AEG barrels and hop units, designed and manufactured to absolutely maximise range, accuracy and consistency.

A 60 degree AEG hop rubber for standard AEG barrels and hop units, designed and manufactured to absolutely maximise range, accuracy and consistency. 

A HOP rubber for AEGs which is compatible with, and allows you to install Crazy Jet GBB inner barrels in your AEG.

A 70 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

Maple Leaf has quickly risen to become the market leader in HOP-up rubbers and inner barrels, and the Maple Leaf Macaron bucking is no exception. The design of the Macaron bucking features a narrower entrance to help the BB feed in a consistent spot with each cycle, and a contact patch with a refined shape intended to provide more consistent lift across the entire upper surface of the BB for greater accuracy than standard HOP buckings.

If you are after a bit more accuracy from your GBB pistol, a tight bore barrel is the easiest and most effective solution! Introducing the 6.02mm Tightbore Inner Barrel from Maple Leaf, legends in the inner barrel market for their innovative crazy jet system. This inner barrel is of a standard design with a 6.02mm bore which will improve accuracy over stock inner barrels and provide a slight increase in FPS.