- High-density polymer construction
- Compatible with M4/AR-15 AEGs
- Baseplate included
If you're tricking out your M4/AR-15 AEG, the G&G Armament M4 AEG Pistol Grip is a great affordable option! This grip follows the standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style.
The style of this pistol grip replicates the real steel "A2" finger-ridged pistol grip commonly found on military-issue M4, M16 and MK18 rifles. This grip has an ergonomic design with a finger ridge for improved comfort whilst aiming down sights and carrying your platform. The set includes a heatsink motor baseplate pre-installed. If you're going for a military-style build, this is the grip for you!
- Various styles available
- High density polymer construction
- Compatible with M4/AR-15 AEGs
If you're tricking out your M4/AR-15 AEG, the Delta Armory Pistol Grip for M4/AR-15 AEGs is a great affordable option! Available in 3 styles to suit any aesthetic or ergonomic preference, these grips are standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style.
- Lightweight Design
- Finger Ridge Surface
- AEG Compatible Replacement
A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip.
- Lightweight Design
- Finger Ridge Surface
- AEG Compatible Replacement
A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip.
- Stippled
- Improve Grip
- Easy to Replace
A set of replacement/upgrade pistol grips for the Army Armament branded 1911 gas blowback pistols.
- Textured Surface
- Ergonomic Grooves
- Rubber Construction
A set of Rubber Pistol Grips for Army Armament 1911 Gas Blowback Pistols, which comes as a one-piece design as seen on the R32, and are very easy to install. Simply undo the screws holding your current Pistol Grips into place (carefully removing them as there may be springs on the underside) and install the new set from the front.
- High-density polymer construction
- Compatible with M4/AR-15 AEGs
- Improve your AEGs ergonomics
The Battleaxe Pistol Grip gunfighter mod.2 for M4/AR-15 AEGs has a cutting-edge grip design with a more vertical angle than other conventional grips, designed specifically for increased comfort in modern shooting stances. This grip also includes a motor baseplate constructed from polymer.
The unique and modern shape of the grip improves comfort and enhances shooting accuracy. As a result, shooters can focus on their target, minimizing hand and arm fatigue whilst taking part in extended skirmish operations. This pistol grip is perfect for those seeking the perfect balance between functionality and ease of use, it also gives your AEG a unique look.
- Real Wood
- Light or Dark
- Rubber Inlays
This is a set of Pistol Grips for the VORSK Agency VX-9, available in either Dark or Light coloured Real Wood. They have Rubber Inlays to match the original set, providing grip and comfort from the material and ergonomic shape. They're incredibly easy to install, requiring only four screws to fit.
- 2-Part Set
- Textured Grip
- Replacement Grips
A replacement set of grip plates designed specifically for KJW M9 Gas Blowback Pistols, which allows you to customise the appearance of your M9, making it stand out from the crowd.
- Designed for TM Hi-Capa GBB Pistols
- Made out of high grade CNC aluminium and stainless steel
- Available in many colours!
What better way to finish of a capa, then with an Aluminium Grip!
Mostly aluminium construction with Steel Mag catch and screws.
You're not going to want to miss out on these!!
*Standard magwells do not fit on these grips
- Designed for TM Hi-Capa GBB Pistols
- Made out of CNC aluminium and steel
- Available in many colours!
What better way to finish of a capa, then with an Aluminium Grip!
Mostly aluminium construction with Steel Mag catch and screws.
You're not going to want to miss out on these!!
*Standard magwells do not fit on these grips
- Various styles available
- High density polymer construction
- Compatible with M4/AR-15 AEGs
If you're tricking out your M4/AR-15 AEG, the Delta Armory Pistol Grip for M4/AR-15 AEGs is a great affordable option! Available in 3 styles to suit any aesthetic or ergonomic preference, these grips are standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style.
- Various styles available
- High density polymer construction
- Compatible with M4/AR-15 AEGs
If you're tricking out your M4/AR-15 AEG, the Delta Armory Pistol Grip for M4/AR-15 AEGs is a great affordable option! Available in 3 styles to suit any aesthetic or ergonomic preference, these grips are standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style.
- Lightweight Design
- Finger Ridge Surface
- AEG Compatible Replacement
A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip.
- For M4/15/16
- Textured Grip
- Durable Design
A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.
- For M4/15/16
- Textured Grip
- Durable Design
A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.
- Rubberised surface
- DD style grip with EMG Markings
- For M4/AR-15 AEGs
If you're seeking ergonomic upgrades for your M4/AR-15 AEG, the EMG DD Tornado Pistol Grip for M4/AR-15 AEG will give you the luxurious experience you deserve! This pistol grip is styled to match the real steel Daniel Defense Tornado pistol grip and also features EMG logos hidden inside the rubber over-mould.
With a comfortable design featuring a finger groove on the front and thumb index points on either side, the lower part of the Tornado grip is coated in rubber, providing extra grip for the palm and keeping your platform firmly in your hands during energetic movement in wet weather. If you're unhappy with your current M4/AR-15 AEG pistol grip, the EMG DD Tornado Pistol Grip will give you comfort and traction in equal measure!
- High density polymer construction
- Licenced KRISS trademarks
- For M4/AR-15 AEGs
If you want improved comfort for your M4/AR-15 AEG, the KRYTAC Trident MKII Pistol Grip for M4/AR-15 AEG is the luxurious pistol grip you need! Boasting licenced trademarks from KRISS on each side and subtle finger ridges on the front to provide traction and keep your hand in place as you shoot, this grip is the same one provided on the KRYTAC Trident MKII series but should also be compatible with the vast majority of M4/AR-15 AEGs on the market.
The baseplate is included and features a nice wide adjustment screw constructed from steel, meaning you should have no issues tuning your motor height to perfection once the grip is installed. The baseplate also includes ports for heat dispersion, meaning your motor will get some fresh air to cool off between bursts. If you're in search of a slick-looking pistol grip which is super comfy and has licenced trademarks, the KRYTAC Trident MKII Pistol Grip for M4/AR-15 AEG belongs on your build!
- Replacement original part
- Includes pistol grip with gas tank
- For Golden Eagle Type 870 Gas shotguns
If your Golden Eagle shotty has developed a leak or you want to convert to a pistol grip setup, this is what you need! The Golden Eagle Pistol Grip Green Gas Tank is designed for the Golden Eagle Type 870 gas shotgun series but should also fit Tokyo Marui M870 platforms, though modification may be required.
The set includes a high density polymer pistol grip with an integral gas tank which can be filled via the fill valve on the base of the grip. As is usually the case with modifications and upgrades, we do not recommend this part for anyone other than a technically proficient Airsofter as it may require troubleshooting to get working perfectly.
- Authentic Russian style
- Fits Arcturus and VFC clone AKs
- Drag your classic rifle into the modern day!
The ARCTURUS Russian Pistol Grip For AEG AK12/AKM/AK74 is constructed from high-density polymer and fits most ARCTURUS AKs, but also VFC platforms and VFC clones such as CYMA and Double Bell. It is designed to replicate real-world pistol grips and enhances the usual AK lack of ergonomics. It features finger ridges for perfect handling in any condition and exceptional comfort, both for gloved and ungloved users.
If you want to drag your AK platform into the 21st century and improve the ergonomics drastically, the ARCTURUS Russian Pistol Grip For AEG AK12/AKM/AK74 is exactly what you need! It also includes the necessary screw for attaching it to your Russian replica rifle.
- Real wood construction
- Replacement piece for M870
- Includes grip and gas tank
If your Golden Eagle M870 has developed a leak, then this is what you need! The Golden Eagle Pistol Grip Green Gas Tank for M870 Shotguns is designed for the Golden Eagle M870 gas shotgun series but will also fit Tokyo Marui M870 platforms, though modification may be required.
The set includes a Real wood pistol grip with an integral steel and alloy gas tank which can be filled via the fill valve on the base of the grip. As is usually the case with modifications and upgrades, we do not recommend this part for anyone other than a technically proficient Airsofter as it may require troubleshooting to get working perfectly.
Get your gas shotgun back on its A-game with the replacement Golden Eagle Pistol Grip Green Gas Tank for M870 Shotguns and stop worrying about any leaking gas.
- Easy to Fit
- 1'' Rised Cheek
- Finger Ridge Grip
A replacement Grip and Cheek Pad Replacement set which allows you to replace the stock parts with upgraded parts.
- Designed for TM Hi-Capa GBB Pistols
- Made out of high grade CNC aluminium and stainless steel
- Available in many colours!
What better way to finish of a capa, then with an Aluminium Grip!
Mostly aluminium construction with Steel Mag catch and screws.
You're not going to want to miss out on these!!
*Standard magwells do not fit on these grips
- Designed for TM Hi-Capa GBB Pistols
- Made out of high grade CNC aluminium and stainless steel
- Available in many colours!
What better way to finish of a capa, then with an Aluminium Grip!
Mostly aluminium construction with Steel Mag catch and screws.
You're not going to want to miss out on these!!
*Standard magwells do not fit on these grips
- Designed for TM Hi-Capa GBB Pistols
- Made out of high grade CNC aluminium and stainless steel
- Available in many colours!
What better way to finish of a capa, then with an Aluminium Grip!
Mostly aluminium construction with Steel Mag catch and screws.
You're not going to want to miss out on these!!
*Standard magwells do not fit on these grips
- Designed for TM Hi-Capa GBB Pistols
- Made out of high grade CNC aluminium and stainless steel
- Available in many colours!
What better way to finish of a capa, then with an Aluminium Grip!
Mostly aluminium construction with Steel Mag catch and screws.
You're not going to want to miss out on these!!
*Standard magwells do not fit on these grips
- Designed for TM Hi-Capa GBB Pistols
- Made out of high grade CNC aluminium and stainless steel
- Available in many colours!
What better way to finish of a capa, then with an Aluminium Grip!
Mostly aluminium construction with Steel Mag catch and screws.
You're not going to want to miss out on these!!
*Standard magwells do not fit on these grips
- Designed for TM Hi-Capa GBB Pistols
- Made out of high grade CNC aluminium and stainless steel
- Available in many colours!
What better way to finish of a capa, then with an Aluminium Grip!
Mostly aluminium construction with Steel Mag catch and screws.
You're not going to want to miss out on these!!
*Standard magwells do not fit on these grips
- Designed for TM Hi-Capa GBB Pistols
- Made out of CNC aluminium and steel
- Available in many colours!
What better way to finish of a capa, then with an Aluminium Grip!
Mostly aluminium construction with Steel Mag catch and screws.
You're not going to want to miss out on these!!
*Standard magwells do not fit on these grips
- Designed for TM Hi-Capa GBB Pistols
- Made out of CNC aluminium and steel
- Available in many colours!
What better way to finish of a capa, then with an Aluminium Grip!
Mostly aluminium construction with Steel Mag catch and screws.
You're not going to want to miss out on these!!
*Standard magwells do not fit on these grips