M4 & AR-15 Variant Airsoft Assault Rifles

If you're into retro loadouts and need the most authentic Mk 18 MOD 0 build around, you've just found it! The CYMA CGS Colt Mk 18 MOD 0 10.5" GBBR boasts official licencing from Colt via Cybergun and is a flawless replica of the original Mk 18, even down to the correct M16A1 lower receiver and 10.3-inch barrel setup.

Inside, the Mk 18 MOD 0 is significantly upgraded, packing a steel bolt carrier, steel trigger group parts, steel bolt catch and adjustable hammer; allowing you to tune power to get right within site limits. Also inside is a 6.03mm tightbore inner barrel, giving you an accuracy edge when compared to standard 6.08mm bores. Being based on the TM ZET system internal design, this thing will shoot like a beast, with even heavier recoil than the original TM!

Whether you're fresh to the sport, seeking a solid beginner primary, or you need a lightweight, affordable backup AEG, the Specna Arms SA-F10 FLEX™ M4A1 AEG; X-ASR MOSFET will see you kitted out! This FLEX™ line build is made almost entirely from robust high-density polymer with an alloy outer barrel and trim parts, keeping the build more affordable, agile and resistant to scratches than comparable metal builds.

Inside, the SA-F10 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F10, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. While it may be a cheap platform, Specna has definitely given us the good stuff inside!

A highly adaptable platform which can be upgraded and modified to suit any tastes in the future, the SA-F10 makes a perfect entry point into Airsoft for the future skirmisher who doesn't want to be fixed to one configuration. Ideal for a US Army loadout or an Airsofter bitten by the customisation bug, the Specna Arms SA-F10 FLEX™ M4A1 AEG; X-ASR MOSFET is ready to face whatever challenge you set for it!

Whether you're fresh to the sport, seeking a solid beginner primary, or you need a lightweight, affordable backup AEG, the Specna Arms SA-F10 FLEX™ M4A1 AEG; X-ASR MOSFET will see you kitted out! This FLEX™ line build is made almost entirely from robust high-density polymer with an alloy outer barrel and trim parts, keeping the build more affordable, agile and resistant to scratches than comparable metal builds.

Inside, the SA-F10 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F10, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. While it may be a cheap platform, Specna has definitely given us the good stuff inside!

A highly adaptable platform which can be upgraded and modified to suit any tastes in the future, the SA-F10 makes a perfect entry point into Airsoft for the future skirmisher who doesn't want to be fixed to one configuration. Ideal for a US Army loadout or an Airsofter bitten by the customisation bug, the Specna Arms SA-F10 FLEX™ M4A1 AEG; X-ASR MOSFET is ready to face whatever challenge you set for it!

If you're working on an old-school-cool build or need a simple and solid starter platform which can be modified to suit almost any battlefield need, the Specna Arms SA-F11 FLEX™ M4/AR-15 CQBR; X-ASR MOSFET should be on your radar. A predominantly high-density polymer build with an alloy outer barrel and trim parts, the SA-F11 makes a great starting point for a custom build, keeping costs low so you can kit her out as you see fit.

Inside, the SA-F11 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F11, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. That's a lot of gun for not a lot of money!

Whether you need a cheap backup or loaner AEG or want to get into the sport with a proven platform with plenty of future upgrades and customisation options, the SA-F11 FLEX™ M4/AR-15 CQBR; X-ASR MOSFET is a great option. Ideal for military-style builds but truly living up to the real steel AR-15's nickname "barbie for men", the sky is the limit when it comes to kitting this CQBR out!

If you're working on an old-school-cool build or need a simple and solid starter platform which can be modified to suit almost any battlefield need, the Specna Arms SA-F11 FLEX™ M4/AR-15 CQBR; X-ASR MOSFET should be on your radar. A predominantly high-density polymer build with an alloy outer barrel and trim parts, the SA-F11 makes a great starting point for a custom build, keeping costs low so you can kit her out as you see fit.

Inside, the SA-F11 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F11, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. That's a lot of gun for not a lot of money!

Whether you need a cheap backup or loaner AEG or want to get into the sport with a proven platform with plenty of future upgrades and customisation options, the SA-F11 FLEX™ M4/AR-15 CQBR; X-ASR MOSFET is a great option. Ideal for military-style builds but truly living up to the real steel AR-15's nickname "barbie for men", the sky is the limit when it comes to kitting this CQBR out!

Need the MK18 look in a lightweight, cost-effective package? The EMG Daniel Defense® MK18 MOD.1 Sports Line AEG; ETU Version has your name on it! Constructed predominantly from high-density polymer with an alloy outer barrel and a mix of alloy and steel trim parts, this detailed MK18 MOD.1 replica is licensed by Daniel Defense via EMG, providing authentic trademarks to complete the realistic look.

On the inside, the EMG MK18 Sports Line features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. Also present is an in-line MOSFET and low-resistance wiring, giving it impressive electrical efficiency, which translates to a super snappy trigger response in semi-auto.

If a MK18 will be your next buy but you're on a tight budget or want to keep your in-game agility, this is the one to go for. Packing licensed trademarks, rock-solid externals, TM-compatible internals and some potent internal parts straight out of the box, you won't find a better MK18 than the EMG Daniel Defense® MK18 MOD.1 Sports Line AEG; ETU Version in this price range!

If you're in search of a close-quarters-optimised M4/AR-15 AEG on a budget, you've found one of the best options with the DA-C14-EGL CHARLIE™ 7" M-LOK M4/AR-15 AEG from Delta Armory! A lightning-fast density polymer build with an alloy outer barrel and steel sling plate, the DA-C14-EGL is also rocking the EAGLE™ programmable MOSFET inside, giving it advanced functionality way beyond its price point!

Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving the DA-C14-EGL far more long-range effect on target than one might expect for such a compact primary!

If you like to move fast and need a platform to match or you're a CQB specialist needing to cut tight corners, you're in great hands with the Delta Armory DA-C14-EGL CHARLIE™ 7" M-LOK M4/AR-15 AEG at your side. Packed with pre-upgraded parts and based on Tokyo Marui's proven internal design, the DA-C14-EGL is affordable, reliable and ready when you are!

Are you looking for a reliable M4 to help you in your skirmishes, or maybe you're a veteran looking for an affordable AEG to pimp out with your own upgrades, if so, the Specna Arms SA-C25 CORE™ HAL¹ ETU™ M4/AR-15 AEG is exactly what you're searching for! It's more compact than the original SA-C25 with its PDW stock, perfect for staying versatile on the battlefield.

This SA-C25 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you're all about full metal ARs with an ultra-modern exterior, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is one to watch! A revamped version of the original Platinum CM.097F, this version keeps the ultra-speedy pre-upgraded gearbox internals of the original and adds advanced functionality into the mix via the pre-installed EShooter Kestrel V2 Basic MOSFET/ETU.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

A pre-upgraded AR AEG for cutting corners tight up close, the CYMA Platinum CM.097F M4/AR-15 CQB AEG; Kestrel Basic ETU is a solid choice for CQB players or those who appreciate a compact build with superb handling. With a trigger response which is hard to beat, compatibility with 11.1V LiPo batteries and high-speed internals refined with the addition of the Kestrel Basic ETU, this latest CM.097F is CYMA's gift to the CQB specialist or fast moving woodland warrior!

If you like the looks and ambidextrous functionality of the ARCTURUS E3 Rifle but you prefer a shorter package, the E3 Carbine is the same thing but with a 10.5-inch outer barrel, making it ideal for close-quarters use, and those who like to play aggressively and close ground with the enemy! Like the E3 Rifle, the E3 Carbine boasts full metal construction, well thought out pre-upgraded ARCTURUS internals, an intimidating looking compensator and M-LOK/Picatinny hybrid handguard up front.

The impressive internal spec includes a 6.03mm steel tightbore inner barrel, rotary HOP-up unit, microswitch trigger and a thoughtfully built gearbox with low friction components. The E3 Carbine is perfect for any aggressive player who wants all the options when it comes to accessories, and will make use of the wealth of QD sling points across this modern M4/AR-15 platform!

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

This Airsoft Electric Gun is a perfect choice for any kind of player, from absolute beginner all the way up to seasoned pro. Thanks to an absolute tonne of features and up-rated internals, this Airsoft Replica offers incredible value for money out the box. With features like a 6.01mm Inner Barrel, Reinforced Steel Gears, Rotary HOP Unit, Quick Remove Spring Guide and more, all for the price of a CM16 Raider, the Evolution Airsoft Recon S Carbontech w/ Superlite Carbontech™ KeyMod Rail System is absolutely ideal.

Do you want a modern-looking rifle with a modern, advanced MOSFET which is also budget-friendly? If so, then you have come to the right place! The Delta Armory DA-C10-EGL CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is exactly that, boasting a similar style to the KS-1 military rifle, just shorter and with a compact suppressor on the front, making it perfect for CQB environments.

The DA-C10-EGL is similarly equipped internally to the original CHARLIE™ series, except the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. This is some seriously high-tech stuff for such a budget-friendly platform!

Do you want a modern-looking rifle with a modern, advanced MOSFET which is also budget-friendly? If so, then you have come to the right place! The Delta Armory DA-C10-EGL CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is exactly that, boasting a similar style to the KS-1 military rifle, just shorter and with a compact suppressor on the front, making it perfect for CQB environments.

The DA-C10-EGL is similarly equipped internally to the original CHARLIE™ series, except the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. This is some seriously high-tech stuff for such a budget-friendly platform!

If you're new to Airsoft and want to start with something a bit more advanced than the average M4, the Delta Armory DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG should suit your needs! This M4 CQBR AEG is constructed primarily from high-density polymer, just like the original DA-C02, but unlike the original, this version is rocking the ALPHA™ ETU series internals, flawlessly marrying a lightweight and agile build with a lightening fast trigger response and the ability to program the trigger for binary trigger or burst mode.

The ETU isn't the only thing added to the DA-C02-ETU; we are also treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The result is a surprising trigger response and intense rate of fire, usually reserved for AEGs twice this price! If you want all of the performance but none of the weight of the Delta Armory ALPHA ETU series, the DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG provides exactly that!

If you're into the Daniel Defense look but want something a bit different, check out the EMG Daniel Defense DDM4® V7 AEG! Based on the real steel DDM4 V7P, this M4/AR-15 AEG is rocking a unique folding stock adapter inspired by the real steel LAW Tactical folding stock, meaning it can fit into smaller gun bags and can cut corners tighter than other ARs, ideal for CQB!

Up front, we have a fantastic replica of the real steel DD MRF 9.0, a dynamic free-floated M-LOK handguard made from CNC aluminium and bristling with licenced Daniel Defense trademarks. The receiver also sports finely engraved DD markings and is equipped with the EMG Alpha 19 ergonomic grip, a comfortable grip design made from superb quality high density polymer. 

Inside, we have the APS Silver Edge II gearbox, a V2 gearbox equipped with 18:1 CNC steel gears, a polymer piston with a full steel tooth rack, a double O-ring cylinder head and stainless steel cylinder. The spring guide is a quick change example, allowing for easy power tuning, and the motor is a 24K high torque, meaning a snappy response rate and respectable rate of fire. Also inside is the APS Micro-FET, an in-line MOSFET designed to prevent trigger lockups and improve electrical efficiency, translating into even more speed downrange. 

Whether you have limited space, like folding things or want a licenced Daniel Defense AR AEG which no-one else has, the EMG Daniel Defense DDM4® V7 AEG should be in your sights! Well equipped both inside and out with a super unique folding stock no other AR has, the DDM4 V7 is the MK18's dynamic-looking, speedy brother!

If you know real steel and like the NOVESKE aesthetic, you need to check this out! The EMG Noveske 13.7" Gen.3 INFIDEL AEG; Kestrel Basic ETU is a longer version of similar rifles like the DIPLOMAT and is is a perfect replica of the real steel Noveske Infidel Gen.3, a dynamic modern rifle beloved for its style and superior performance.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum internals, complete with the Kestral Basic ETU, just to top it off. For superior performance, this AEG is equipped with 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. It comes straight out of the box laser accurate and lightning fast!

If you know real steel and like the NOVESKE aesthetic, you need to check this out! The EMG Noveske 13.7" Gen.3 INFIDEL AEG; Kestrel Basic ETU is a longer version of similar rifles like the DIPLOMAT and is is a perfect replica of the real steel Noveske Infidel Gen.3, a dynamic modern rifle beloved for its style and superior performance.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum internals, complete with the Kestral Basic ETU, just to top it off. For superior performance, this AEG is equipped with 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.03mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades. It comes straight out of the box laser accurate and lightning fast!

If you value realism and need a compact AR platform which is built like and tank with top-tier performance, you're looking for a KRYTAC EMG BARRETT REC7 MK3 SBR AEG! The latest version of KRYTAC's stunning REC7 platform, the MK3 boasts the same ever-impressive externals as the original with further internal improvements to squeeze a bit more performance out of this already beastly build!

If you're into firearms of recent times, you'll love the Delta Armory DA-C010 AEG! It has similar styling to the current military KS-1 rifle, just half the size and a compact suppressor on the front, making it perfect for CQB environments. On the outside, the DA-C10 is made primarily from high-density polymer with an M-LOK handguard, 14mm CCW threaded barrel, and 20mm Picatinny railed receiver, ready to be kitted out!

Inside the DA-C10 is a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C10 CHARLIE™ 8" M-LOK SilentOps M4/AR-15 AEG is an excellent choice!

An electric powered 6mm Airsoft M4 styled weapon that is majoritively made from high density Polymers to keep the weight down, and after a few hours of carrying around you'll be thanking them for it!

If you're after a beginner-friendly M4/AR-15 AEG with a cutting-edge aesthetic, the Delta Armory DA-C08 CHARLIE™ 8" M-LOK M4/AR-15 AEG is one to watch. Made from high density polymer with an alloy outer barrel, this build is super light and agile, fantastic for younger players with limited physical strength, though the lightweight build does not necessarily mean compromise!

On the outside, the DA-C08 is rocking an M-LOK handguard with 20mm rail sections pre-installed and a 20mm Picatinny railed receiver, ready for a red dot sight, scope or any other accessory you choose to mount. The outer barrel is threaded to 14mm CCW, meaning common suppressors and tracer units will mount with minimal fuss. Internally, things are equally impressive!

The DA-C08 is based around the common V2 gearbox with an alloy shell, 18:1 ratio steel gears running on 8mm bushings and a reinforced SHS tappet plate and piston with a full steel tooth rack. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up, giving you the kit you need to get good effect on targets downrange. With a compact CQB-friendly form, pre-upgraded internals and full aftermarket compatibility, the DA-C08 CHARLIE™ from Delta Armory is a fantastic starter AEG or base for a custom build!

A full metal electric powered M4 based Airsoft gun with a four point RIS handguard, sliding stock and removable carry handle.

If you're looking for an AEG packed with pre-upgraded parts based on a cutting-edge real steel design, the Specna Arms SA-PH23 PRIME™ M-416 RAHG 10" AEG should be right up your street! Building on the previous EDGE 2.0 variant, the internals of the SA-PH23 have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful Dark Matter™ brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The PRIME™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

An advanced platform both inside and out, the M-416 RAHG is ideal for US Navy SEAL Operation Neptune Spear loadouts or any other modern special forces loadout, bringing high-end looks along with insane performance to the table. If you're after an eye-catching AR-derived AEG with internals to contend with the best, the Specna Arms SA-PH23 PRIME™ M-416 RAHG 10" AEG belongs in your arsenal!

If you're into the 416 vibe but want something more modern and swift to point, the Specna Arms SA-PH22 PRIME™ M-416 RAHG 14.5" AEG is one to watch. Part of Specna's impressive PRIME™ range, the SA-PH22 is packed with pre-upgraded parts and designed to compete with the very best Airsoft has to offer, with no need for additional upgrades or tuning. Some of these upgrades include a powerful Dark Matter™ brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings, CNC aluminium cylinder group parts and a reinforced tappet plate for reliable feeding.

The PRIME™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to enhance performance, improve consistency and increase rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

A sleeker, more agile alternative to the hefty quad-rail equipped 416, the Specna Arms SA-PH22 PRIME™ M-416 RAHG 14.5" AEG is certain to turn heads on the field, even more so when you shoot it! If you're after an ultra-modern AR setup with pre-upgraded internals to rival the best, the SA-PH22 is the ideal choice!

The EVOLUTION S Recon M EMR S ETS is another excellent AR15 platform offering a range of top-notch qualities, a great choice for the player looking to tech-up their set-up.

The EVOLUTION S Recon M EMR S ETS is another excellent AR15 platform offering a range of top-notch qualities, a great choice for the player looking to tech-up their set-up.

Introducing the latest version of the Evolution Airsoft E-416 AEG, in compact 10" barreled form for up close and personal work. The E-416 CQB sports the usual Evolution Airsoft upgraded internals, now with their latest ETU, the ETS III pre-installed. The E-416 CQB 10"  is equipped with a high torque motor, 6.01mm tight bore inner barrel with the latest rotary adjustable HOP-up unit, and a quick change spring system, granting you flexibility without having to mess with the finely tuned internals. The ETS III adds some major functionality to the platform, enabling a plethora of advanced functions including burst mode, binary trigger and ramping automatic fire, all of which can be programmed using the fire controls on the weapon itself!

Introducing the latest version of the Evolution Airsoft E-416 DEVGRU AEG, sporting the usual Evolution Airsoft upgraded internals, now with their latest ETU, the ETS III pre-installed. The E-416 DEVGRU is equipped with a high torque motor, 6.01mm tight bore inner barrel with the latest rotary adjustable HOP-up unit, and a quick change spring system, granting you flexibility without having to mess with the finely tuned internals. The ETS III adds some major functionality to the platform, enabling a plethora of advanced functions including burst mode, binary trigger and ramping automatic fire, all of which can be programmed using the fire controls on the weapon itself.

Introducing the latest version of the Evolution Airsoft E-416 AEG, sporting the usual Evolution Airsoft upgraded internals, now with their latest ETU, the ETS III pre-installed. The E-416 is equipped with a high torque motor, 6.01mm tight bore inner barrel with the latest rotary adjustable HOP-up unit, and a quick change spring system, granting you flexibility without having to mess with the finely tuned internals. The ETS III adds some major functionality to the platform, enabling a plethora of advanced functions including burst mode, binary trigger and ramping automatic fire, all of which can be programmed using the fire controls on the weapon itself.