Airsoft Pistol Magazines

An Alloy constructed 23rnd magazine for the Vorsk Vengeance Hi-Capa Gas Blowback Pistol.

The Novritsch 24rnd Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, Y&P, Stti, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas and can be refilled at the bottom, the BBs can be inserted into the magazine by pulling down the spring tab and filling up the BB chamber with a speedloader. This mag comes with a 1-stage valve and has a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 24rnd Magazine for SSX23/MK23 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

Need some big mags for your big handgun? The Cybergun Desert Eagle green gas magazine should do the trick! This magazine is designed for the Cyber Gun Airsoft Desert Eagle L6 GBB and holds approximately 27 BBs which can be loaded using a speed loader through the feed lips at the top of the magazine. This magazine is a green gas magazine and can be filled through the fill valve on the magazine's baseplate, and can also take summer gas to keep the FPS down to reasonable levels on hot days. The magazine is constructed from alloy with polymer feed lips, with a steel feed spring and brass valves, and has realistic mock witness holes on each side, matching the cut-outs in the real Desert Eagle magazine used for gauging how many rounds are left.

A new design of Airsoft 6mm Dan Wesson revolver cartridges from ASG with a deep grove cut out at the rear.

A spare magazine for WE Europe's Makarov W65U pistols. The magazine is constructed entirely from Alloy and features an Alloy base plate, making the magazine durable and more resistant to drops. 

A spare magazine for WE Europe's Makarov W65U pistols. The magazine is constructed entirely from Alloy and features an Alloy base plate, making the magazine durable and more resistant to drops. 

A gas blowback CO2 magazine, designed for Cyber Gun's series of Colt 1911 Rail Gun Airsoft replica pistols.

A magazine designed for use in the WE Europe's GALAXY Series of pistols. Each magazine is of a full metal construction and holds up to 25 rounds.

A Green Gas, 25 round magazine for the UMAREX Heckler & Koch USP .45 GBB Pistol.

A gas blowback Magazine for the WE Europe EU-Series Pistols EU19, and EU23.

An Airsoft 6mm BB gas blowback magazine for the 5.1 Hi-Capa pistol series, with a double stacked design it has a capacity of up to 25 bb rounds. 

A time with a full alloy outer construction and base this magazine is durable yet lightweight. The feed lips and BB follower are polymer and are replaceable. 

A replacement or spare Magazine for a RAVEN branded Hi-Capa 4.3 or 5.1. It holds a total of 25rnds and is powered by a 12g CO2 Bulb, which means it works far better in the cold than a Green Gas Magazine. This Magazine will provide much stronger recoil and better shots-per-magazine, especially when Winter is upon us.

If you need mags for your ASG P-10C CO2 version, here you go! Just like the original mag supplied with your ASG P-10C CO2 GBB pistol, this magazine holds 22 BBs and is constructed from alloy with a high-density polymer baseplate. Loading the mag is the same procedure as other GBB magazines, either load through the feed lips at the top or through the follower channel on the front when the follower is held down. You can use a speed loader or do it by hand, depending on your timescale!

While the CO2 and Green Gas versions of the P-10C are cross compatible, we have been told specifically by ASG not to use CO2 mags in the polymer slide equipped green gas model to avoid premature wear and tear and potentially, catastrophic failure. We suggest you heed this warning!

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

An Alloy constructed Gas Powered magazine for the SRC branded TT-33 replica (SR-33). It holds a total of 11rnds and is filled from the bottom with Green Gas via the Inlet Valve. The follower is easy to pull down from the side, and it can be easily loaded by hand or using a Speedloader. Be careful not to let the follower spring up otherwise the feedlips could be damaged.

If you need spare magazines for the KRYTAC Maxim 9 GBB you have found what you need! Like the original mag, these magazines are constructed with a lightweight aluminium shell which makes them far lighter than equivalent GBB mags, meaning you can carry more and move faster!

Each magazine holds 24 BBs and can be loaded either through the feed lips at the top of the magazine body, or through the feed channel at the front of the magazine by first pulling the follower down to the bottom. The gas fill valve is on the rear of the magazine and this magazine is designed for use with Green Gas. This magazine is the original mag supplied with the Maxim 9 and is also compatible with the UMAREX/VFC Glock 17 GBB, both gen.4 and gen.5 flavours.

If you want to keep your beast of a Novritsch pistol shooting perfectly in cold weather, you'll need one of these! The Novritsch 31rnd CO2 Magazine for SSP1/SSP5 GBB Pistol is constructed from alloy with a polymer baseplate and is compatible with both the SSP1 and SSP5 GBB pistols.

The mag is loaded either through the feed lips or the follower channel when the follower is held down using a speed loader or loading tool. If you're new to CO2, we recommend giving our CO2 guide a quick read so you can stay abreast of maintenance and CO2-specific safety issues.

This mag uses 12g unthreaded CO2 capsules, one of which needs to be installed inside the magazine shell. To access the CO2 compartment, simply press the small button on the bottom and slide the baseplate off. Underneath, you will find the CO2 plug which can be removed with the included Allen key or a flat tool if you don't have the Allen key handy. Install your CO2 capsule inside, tighten the plug down until you hear the capsule pierce and replace the baseplate; you are now good to go!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you have the desire to dump 350 rounds in one long burst from your GBB pistol but you don't want to go the HPA route this is your chance! The WE Europe 350rnd Green Gas Drum Magazine is designed for WE's GBB EU series which means it will also work in the Action Army AAP-01.

The magazine is constructed with a hefty alloy gas reservoir with a high density polymer drum with rubber shock bumpers and an external winding wheel on the front which is easy to wind quickly with or without gloves. The sizeable gas reservoir of this magazine means in most cases you will easily be able to dump the full magazine without a refill, so if you go pistols only and you need extra firepower to compete, this will suit you well!

An extended 32 round magazine designed for the WE P-Virus P226 gas blowback pistol. 

These magazines are perfect for those who have the 3.8 Hi-Capa pistol, allowing you to have more shots available and allowing you to practice pistol loading drills.

If you're running an AEP and need more firepower, check this out! The CYMA 100rnd Auto Winding Drum Magazine for CM.030/122/123/127 AEP is electrically powered via an internal rechargeable battery, charging via the included USB Type-C cable. The charging port is on the front, as is the auto-winding button, allowing you to increase capacity without wearing your thumbs-down winding a wheel!

To fill the mag with BBs, simply open the fill window on the rear of the magazine body and pour your BBs in. Next, press the winding button until the noise changes to tension the magazine, ready for insertion. If your mag stops feeding but still has rounds left, hold the button to retention and then get back to shooting! 

Compatibility-wise, this magazine fits the CM.030, CM.122, CM.123, CM.127, ASG XP17 Challenger and CM.135S AEPs. If you're fed up with reloading with fiddly AEP mags, get this and you won't look back!

If you're planning to run your Tokyo Marui Hi-Capa GBB on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; TM Hi-Capa GBB will improve your firepower considerably!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. Allowing standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your 'Capa!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

A replacement magazine for the WE Europe Little Bird pistol collection. The magazine is constructed from Alloy, and is finished matte black.

A Green Gas, 22 round magazine for the UMAREX Heckler & Koch VP9 GBB Pistol.

If you're rocking the Umarex/GHK Glock 17 MOS or Glock 45 MOS GBB pistol, these are the mags you need! The Umarex 20rnd Magazine for GHK Glock 17/45 Gen5 MOS GBB is officially licenced by Glock Ges.m.b.H and includes Glock markings on the baseplate to complete the look. 

A more realistic design than your usual Glock mag, this magazine doesn't have a follower channel on the front, making it look almost identical to a real Glock magazine. Loading BBs is done through the feed lips at the top of the magazine body using a speed loader and the gas fill valve is on the bottom, concealed beneath the baseplate. To access the fill valve, push the detent on the bottom of the baseplate inwards and slide the baseplate off. Compatibility wise, this magazine is designed specifically for the GHK OEM Glock 17 MOS and Glock 45 MOS and in all likelihood, won't work with other Glock or EU series platforms. 

A replacement magazine for EX Series PX4 Style WE Airsoft gas blowback pistols.

A replacement Airsoft gas magazine for the WE Europe Browning Hi-Power. The magazine is constructed from Alloy, with Alloy feed lips and base. The magazine has a 20 round capacity.