Airsoft Magazines

If you are rocking the EC-202, EC-203 or EC-204 you will need some mags to keep it doing what it does best. The East Crane 110rnd Mid-Cap Magazine for EC-202/203/204 AEG is constructed with a transparent polymer shell and a steel feed spring, showcasing detailed mock 7.62x51mm cartridges inside for that realistic look. This mag is compatible with the EC-202, EC-203 and EC-204 AEG series but will not fit other 417-style Airsoft guns. 

This is a mid-cap magazine, meaning it is loaded through the fill/feed port at the top of the mag using a speed loader or loading rod. Thanks to its spring-loaded design you will never experience the dreaded battle rattle while carrying this mag, making it great for milsim skirmishers and those who prioritise stealth!

If you are looking for mid-caps with a bigger-than-average capacity the EMG 210rnd Strike Industries Polymer Magazine for M4/AR-15 AEG fits the bill! These magazines are constructed from seriously solid high density polymer with a steel feed spring and a high-vis orange follower so you can easily see when you are fresh out of ammo.

Being officially licenced by Strike Industries, this magazine is a near 1:1 copy of the real Strike Industries "Strike Mag MK1" and is not shy about its brand pedigree, with subtle licenced trademarks across the design as well as realistic 5.56x45 calibre markings. If you are looking for a more realistic alternative to the PTS EPM magazine, this would be a great choice!

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

If you own the gorgeous new JDG Polymer 80 PFS9 from Double Eagle, or you have a TM based EU series GBB and you need better rapid-fire performance, this magazine is a great way to get there! The 30rnd JDG P80 PFS9 magazine is constructed from alloy with polymer feed lips and a steel feed spring and holds 30 BBs which can be loaded either using a speed loader or by hand through the feed lips or the feed port on the front which is accessible when the follower is pulled down. The advantage of using this magazine over a standard length EU series mag is its enlarged gas reservoir, meaning better cold weather performance, less FPS variance under rapid-fire and more shots per fill of gas.

A gas blowback Airsoft CO2 magazine developed by VORSK for their EU/G-Series range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is an extended version of the standard magazine and holds an impressive 48 rounds and is a direct replacement for the magazine which comes with the pistol, filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included allen key, through the baseplate.

If you're looking to bolster your VORSK EU/G-Series pistol with 100% compatible magazines then this is the way to go. This magazine is also great for those Airsoft skirmishers who believe in accuracy through volume, or CQB players who want to just run around with a spare mag in their hand and go shoot. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

A Mid-Cap Magazine for SR-25 / AR-10 Platform Rifles that accept a 7.62x51mm STANAG Magazine. It is a Spring Powered Magazine that is filled using a Speedloader, and will feed until empty without any rattle. With a Steel Outer Shell, this is a seriously strong and realistic Magazine, which is perfect for staying in the fight for longer without refilling. As an added bonus, it is compatible with CYMA, A&K as well as Tokyo Marui branded Rifles.

For all you AUG lovers out there wanting to keep shooting with the need of winding. This magazine can hold up to 80 rounds and is filled from the top using a speed loader. Featuring a  classic waffle design, the mag makes it easier to grip and quicker to remove from pouches. The magazine works via a spring system, so when filled with BBs will not Rattle, unlike hi-cap magazines.

This is the perfect magazine for those who have a Steyr AUG Airsoft AEG and want more magazines so they can keep playing for longer without reloading.

If a bald New York cop just killed your brother, it's time to pull out the AUG! If you are making use of a fine Austrian inspired AEG rifle, you will probably need some magazines to keep up when skirmishing. These magazines are designed for the AUG Airsoft AEG series, including Jing Gong AU-1G and others based on the original Tokyo Marui design. This magazine is realistically designed, with ribs on the exterior surface to add strength and to provide exceptional grip. The magazine is filled through the fill window at the top of the magazine body and can be wound using the wheel on the baseplate. This mag is available in either solid black, or translucent brown, meaning whether you are doing a modern tactical AUG or an old-school classic AUG, these mags will suit!

If you're searching for more mags for your CM.136 EBB, here they are! CYMA's 15rnd Magazine w/ 11.1V 350mAh LiPo Battery for CM.136 Grach is loaded through the feed/fill window on the top using a speed loader or by hand, designed specifically for the CM.136 Grach EBB with an 11.1V LiPo battery built-in. 

The integral battery is charged using the cable included with your CM.136 via the charging port on the baseplate. As with all LiPo batteries, this battery MUST be charged using a LiPo balance charger through the balance port. Standard LiPo safety applies, including not leaving your battery charging while unattended and always using a battery charging bag. Keep your super fun EBB Grach running for longer in-game with the CYMA 15rnd Magazine w/ 11.1V 350mAh LiPo Battery for CM.136 Grach!

If you want to take pure advantage of the AAP-01's insane rate of fire or you operate with the philosophy that reloads are for losers, the Action Army 350rnd Drum Magazine for AAP-01 GBB Pistols is perfect for you! This green gas drum magazine operates via a "flash mag" type system, meaning instead of winding an awkward wheel to keep the mag feeding you simply need to pull the steel drawcord on the base 4-5 times and you're ready to rock. 

The Drum Magazine holds 350 BBs, more than 10 times the capacity of a standard AAP magazine and around 7 times the capacity of an extended AAP magazine; the perfect thing for AAP owners making full use of full auto and those who move so fast they ain't got time to reload! 

If you want a long-boi magazine for your B9 AEP but you hate battle rattle giving you away, this mag was made to meet your needs! The CYMA 80rnd Long Mid-cap Magazine For CM.132/126 B9 AEP follows the external format of the CYMA AEP High-caps but is a rattle-free spring loaded mid-cap which should keep those with a more sneaky playstyle at the top of their game.

The magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 80 6mm Airsoft BBs; a significant increase over the standard AEP magazine. Compatibility-wise, this magazine is suitable for the CYMA CM.126, CM.126S, CM.132 and CM.132S B9 style AEPs and is unlikely to work in other designs.

If you need magazines for your STEN or MP40 AEG, these will do the trick! The AGM 55rnd Low-Cap Magazine is compatible with AGM's STEN gun and MP40 AEGs, holding 55 BBs with no battle rattle thanks to its spring-loaded design. The external shell of the magazine is constructed from steel for an authentic feel and has reinforcement ribs on either side, matching the real thing to a tee.

This magazine is a low-cap, meaning it holds 55 rounds and is ideal for Milsim players and reenactors who require close to real capacity magazines. To load the mag, simply fill it through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod. These mags are ideal for those who enjoy a reload under pressure, but if you want more capacity, check out the Mid-cap version.

An Airsoft M4 6mm BB Gun High Capacity Magazine with a twist, instead of using a bottom winding wheel, a pull cord is built into the magazine which can be pulled to quickly prime the magazine.

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 21 rounds. The magazine is a direct replacement of the magazine which comes with the pistol, and great for those who want the original magazines which go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

Need some extra firepower for your AK AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic and is a low-profile alternative to full-sized AK drums, allowing you to get lower in the prone position to make the most of the surrounding cover.

If you are running the Double Eagle DEK762 and you want mags that match the original, you just found them! The Double Eagle 130rnd 7.62x39 Style Mid-Cap Magazine for M4/AR-15 AEG is styled after real steel 7.62x39mm AR magazines, making it a perfect fit for the DEK762 but also compatible with most M4/AR-15 AEGs.

The magazine is constructed with a steel shell, polymer internals and a steel feed spring, showcasing mock reinforcement ribs stamped into each side. This mag is also quite short for a 130-round mag, allowing you to get closer to the ground when shooting from the prone position and make better use of surrounding cover. As with other Airsoft mid-caps, the 7.62x39 style magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Whether you own the DEK762 or you want to add an unconventional look to your M4/AR-15 AEG, this mag is perfect for the job!

Those of you who own a Tokyo Marui NGRS M4/AR15 and need some extra mags to stay on the field, you've come to the right place. With a 70 round capacity, this mag is a mid-cap mag meaning there is no rattle when you're running from objective to objective.

BBs are fed with a steel spring inside and the extended rod means that no BBs will escape during loading / reloading. This mag has the mechanism to activate the bolt catch of the TM NGRS variants, so if you like realism this is the mag for you.

Those of you who own a Tokyo Marui NGRS M4/AR15 and need some extra mags to stay on the field, you've come to the right place. With a 70 round capacity, this mag is a mid-cap mag meaning there is no rattle when you're running from objective to objective.

BBs are fed with a steel spring inside and the extended rod means that no BBs will escape during loading / reloading. This mag has the mechanism to activate the bolt catch of the TM NGRS variants, so if you like realism this is the mag for you.

If you need more mags for your Novritsch SSG96, you've found them! The Novritsch 22rnd Magazine for SSG96 Sniper Rifle is constructed from translucent polymer so you can keep track of your round count and is compatible with both the Novritsch SSG96 MK1 and MK2. The mag can be loaded through the feed lips either by hand or with a speed loader and holds 22 BBs; more than enough for such an accurate platform!

Are you evil? Do you not think 3/6 shots per trigger pull is enough firepower? In that case, allow us to introduce you to the NUPROL 1200rnd Electric Drum Magazine for Tri-shot Airsoft shotguns, a device that will not make you any friends at a CQB skirmish, thats for sure! This drum magazine is constructed from high density polymer with a modern look, matching well with modern tactical pump action Airsoft shotguns and transforming any shotgun it is mounted to into an intimidating CQB dominator, both in looks and in function! 

If you're running one of the new Umarex BERETTA PMX SMGs, you'll need a few of these to keep the fun and kills coming! The 48rnd Green Gas Magazine is constructed from alloy and compatible with the Umarex BERETTA PMX. The mag can be loaded either through the feed lips at the top of the mag body or through the feed channel by pulling the follower down. We recommend a speed loader to make the loading process easy and avoid being the last one ready on game day!

This is a green gas magazine and is compatible with summer gas, green gas or red gas and can be filled by inverting the magazine through the fill valve on the baseplate.

A 145rnd clockwork wound high capacity magazine for the Well R-4 series of SMG-7 styled Airsoft AEP.

A Polymer constructed Mid-Cap Magazine for AR/M4/M16 platform Airsoft Electric Guns, which holds a total of 130rnds and is a semi-transparent design with dummy rounds inside.

An extra Nuprol N96 magazine for the sniper who wants to stay in play for longer. Add a couple of these to your rig and you can hide in a bush for hours!

If you need mid-cap mags for your Classic Army based FAL AEG these should do the trick! The Fuxing 160rnd Mid-cap Magazine for JG/CA LK58/ SA58 AEG is constructed with a steel shell, polymer internals and a steel feed spring and as with all mid-caps, this thing doesn't rattle like maracas as you advance on the enemy!

The mag can be loaded through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading rod/tool and needs to be inserted into your LK58 or SA58 AEG with a "rock and lock" motion. The mags are designed for the JG LK58 AEG platform but should also work in the Classic Army SA58 on which the design is based.

A spare magazine for WE Europe 1911 Airsoft pistols. The magazine is constructed entirely from Alloy, with the only Polymer parts being the feed lips and follower.

If you like to shoot a lot with minimum downtime winding or reloading a flash mag is just what you need! This magazine is styled after the 5.45x39 AK74 magazine and is a flash mag, meaning it functions similarly to a high-cap but instead of the usual winding wheel we have a pull cord beneath a hinged baseplate which allows you to wind the magazine far faster than a conventional winding wheel.

The magazine can be filled through the fill window at the top of the mag body as usual, and with it filled up you can pull the baseplate open from the front of the mag and access the winding cord inside. A few pulls of the cord should tension the magazine so you can get shooting with a massive 500rnd capacity at your disposal. If you like maximum shooting and minimum winding and reloading, this is the mag for you!

If you like to shoot a lot with minimum downtime winding or reloading a flash mag is just what you need! This magazine is styled after the 5.45x39 AK74 magazine and is a flash mag, meaning it functions similarly to a high-cap but instead of the usual winding wheel we have a pull cord beneath a hinged baseplate which allows you to wind the magazine far faster than a conventional winding wheel.

The magazine can be filled through the fill window at the top of the mag body as usual, and with it filled up you can pull the baseplate open from the front of the mag and access the winding cord inside. A few pulls of the cord should tension the magazine so you can get shooting with a massive 500rnd capacity at your disposal. If you like maximum shooting and minimum winding and reloading, this is the mag for you!

Looking for spare mags for your Spicy Vorsk VX26 GBB? Here they are, with a whopping 30 round capacity and a nice polymer baseplate to protect the magazine from accidental drops. This magazine is for use with green gas and is loaded through the feed lips at the top or by pulling the follower down and loading though the widened section of the follower channel. You can use either a speed loader or do it by hand, though we advise the former if you're in a hurry!