Airsoft Under £25

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG (VFC OEM) and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb! Compatibility-wise, this magazine is specifically for the VFC-manufactured Cybergun SCAR-H AEG and won't fit the Ares-made versions.

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG (VFC OEM) and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb! Compatibility-wise, this magazine is specifically for the VFC-manufactured Cybergun SCAR-H AEG and won't fit the Ares-made versions.

If you're kitting out your M-LOK handguard, the Specna Arms SAAS M-LOK Angular Front Grip is a solid foregrip option! Made from lightweight aluminium, this innovative foregrip includes a built-in QD sling socket on the rear facing the shooter, saving space to make your M-LOK slots go that bit further!

The contact surface of the SAAS Angular Front Grip is serrated for maximum traction in any weather conditions and includes an integral hand stop to prevent your hand from going past the handguard and into the danger zone. If you're after an angled foregrip for M-LOK and you also need a QD sling point, the Specna Arms SAAS M-LOK Angular Front Grip is your perfect combination!

Introducing the Target Poppers Set of 5, an essential addition to your shooting range equipment. Engineered for durability and precision, these poppers offer an engaging and challenging target experience for shooters of all skill levels.

If you need more stability when shooting from a static position, the Specna Arms Adjustable Telescopic Bipod for 20mm Picatinny Rail will assist! The bipod is predominantly made from alloy, with certain steel parts for strength. The bipod legs can be collapsed and extended by turning the knurled section on each, catering to a wide variety of platforms, terrain and uses.

The bipod is constructed from Alloy, with Rubber feet to prevent slipping on wet surfaces. The bipod mounts to 20mm Picatinny rails using an integral rail mount which can be tightened either by hand or using a large flat-headed screwdriver to secure. The legs can be folded up and down for transport using the catch on each, keeping your setup portable for when you need to relocate (fancy word for legging it). If you're running a hefty DMR or sniper rifle setup, use this Bipod to get more accurate shots from a supported position!

If you need more stability when shooting from a static position, the Specna Arms Adjustable Telescopic Bipod for 20mm Picatinny Rail will assist! The bipod is predominantly made from alloy, with certain steel parts for strength. The bipod legs can be collapsed and extended by turning the knurled section on each, catering to a wide variety of platforms, terrain and uses.

The bipod is constructed from Alloy, with Rubber feet to prevent slipping on wet surfaces. The bipod mounts to 20mm Picatinny rails using an integral rail mount which can be tightened either by hand or using a large flat-headed screwdriver to secure. The legs can be folded up and down for transport using the catch on each, keeping your setup portable for when you need to relocate (fancy word for legging it). If you're running a hefty DMR or sniper rifle setup, use this Bipod to get more accurate shots from a supported position!

Looking for affordable eye protection? Bolle Safety has your back with the TRYON Clear Safety Glasses. Rated EN166 FT and made from 52% recycled materials, the TRYON glasses are ready to rock at outdoor skirmishes and are also ideal for target shooting, working with power tools or cycling. For indoor CQB, we recommend choosing eye protection with a goggle strap, just to be extra safe.

A comfortable wrap-around design with a non-slip nose bridge, the TRYON glasses feature Bolle's PLATINUM anti-fog coating and an anti-scratch surface, keeping your vision clear in all but the worst-case scenario.

Looking for the perfect finishing touch for your 20mm Picatinny rail-equipped primary? The Airsoft Artisan AD 20mm Picatinny Hand Stop is as functional as it is stylish! Made from CNC-machined aluminium to an exacting standard and finished with a bomb-proof anodisation which feels luxurious to the touch, the AD Hand Stop is a significant step up in quality compared to most Airsoft accessories; perfect for a build which deserves only the best!

The AD Hand Stop can be oriented in either direction, ideal for limiting your hand position and avoiding overshooting the handguard after a reload or using as a foregrip to pull your primary back into your shoulder to keep it controlled. Its curved profile makes it comfortable in either orientation, and its textured surface provides optimal gripping qualities in any weather condition.

This version mounts to 20mm Picatinny rails and is ergonomically bevelled to avoid any irritating "hot spots" between the rail and the unit itself, ideal for use over long durations. Whether you're improving ergonomics or aesthetics, the Airsoft Artisan AD 20mm Picatinny Hand Stop will do the trick!

If you're looking for a protective full-face mask with sleek styling, the DYE SE Full Face Airsoft Mask; Single Lens is a fine choice! An affordable yet feature-packed mask from Paintball legends, DYE, the SE Full Face Mask is fully adjustable via its comfortable elastic headband and secure chinstrap, making it suitable for a wide variety of head shapes and sizes. Thanks to ample clearance between your face and the polycarbonate lens, the SE is even suitable for wear with most prescription glasses underneath!

The SE Full Face Mask features a built-in visor, ensuring sunlight doesn't obscure your vision when skirmishing outdoors. The lens includes an anti-fog coating and boasts a 260° field of view, ensuring your situational awareness is at maximum out on the field. Also amongst the SE's tricks is a modular lens system known as "SLS", allowing you to exchange your lens for any other in the DYE SLS range in under 10 seconds!

To ensure the SE remains comfortable when worn over long durations, internal foam padding prevents pressure points while providing airflow so you don't get too sweaty. A robust face mask that will never let you down, the DYE SE Full Face Airsoft Mask; Single Lens is ideal for skirmishers who want all-encompassing face and eye protection in a comfortable, single-piece unit!

If you're looking for a robust M-LOK sling point, look no further than the Airsoft Artisan M-LOK Sling Mount! Made from steel for maximum strength, this sling point is capable of mounting both hook-style and standard strap slings. It mounts to M-LOK negative space attachment slots, ideally used as a front sling point.

Need more stability for long-range shots? The Specna Arms Spring Loaded Bipod for Harris Lug will do the trick! Designed to mount to a Harris-style sling/bipod Lug by twisting the thumbscrew on the base so that a pair of 'pincers' will grab onto the Lug, then tightening it down for a firm fit, this bipod is ideal for milsim sniper rifle setups!

The Bipod has spring-loaded legs which can be extended to full length by pressing the button for each leg. Once deployed, you can adjust them between 6 different levels of extension. Each leg can be adjusted independently, allowing you to set your rifle up on uneven ground. When not in use, you can easily fold the legs back into place by hand, with no fiddly catches to defeat while you're pumped with adrenaline. The Rubber Feet on the bottom of each Leg make any Rifle stable when used on flat ground, and will provide ample grip and stability.

The Spring Loaded Bipod for Harris Lug mounts to Harris sling/bipod lugs, which are present on many Airsoft sniper rifle replicas, including most M40A1, M24 and VSR-10 replicas. If you're rocking one of these rifles and want to make it look the business while improving stability when shooting from static positions, the Specna Arms Spring Loaded Bipod for Harris Lug belongs on board!

Want to mount your favourite tracer or suppressor to your SSX23? The Novritsch SSX23 Thread Adapter lets you do just that! Designed for the Novritsch SSX23 but also compatible with the TM and ASG/STTI MK23, this adapter mounts to 16mm CW male barrel threads and provides 14mm CCW male threading, ready for the most common suppressors and tracers on the market.

The adapter is made from aluminium and includes a helpful knurled surface so you can mount it firmly but remove it easily when needed. If you have a specific suppressor in mind but it doesn't fit the SSX23/MK23 non-standard threads, this adapter will sort you out!

If you're looking for a battery for a top-wired AK setup or an SMG-5K, this is the one! The Giant Power 11.1v 1300mAh 25C LiPo Slim Stick Battery is ideal for long, slim battery compartments, measuring approximately 18.7cm x 1.3cm x 1.7cm with a 5cm wire length, and is pre-wired to a Deans/T-plug connector. 

Please note: 11.1V LiPo batteries can cause pre-engagement in AEGs at UK power levels. This can result in internal damage. Please ensure you only use 11.1V batteries in AEGs designed for them (see "Specifications" on our AEG product pages for battery recommendations). 

If you're looking for a battery for a top-wired AK setup or an SMG-5K, this is the one! The Giant Power 7.4V 1500mAh 25C LiPo Slim Stick Battery is ideal for long, slim battery compartments, measuring approximately 16.5cm x 1cm x 1.6cm with a 5cm wire length, and is pre-wired to a Deans/T-plug connector. 

This 7.4V LiPo consists of 2 cells bound together into a single cell group, with a 25C continuous discharge rate and a capacity of 1500mAh. 

If you're looking for a battery for a top-wired AK setup or an SMG-5K, this is the one! The Giant Power 7.4V 1300mAh 25C LiPo Slim Stick Battery is ideal for long, slim battery compartments, measuring approximately 18cm x 0.8cm x 1.6cm with a 5cm wire length, and is pre-wired to a Deans/T-plug connector. 

This 7.4V LiPo consists of 2 cells bound together into a single cell group, with a 25C continuous discharge rate and a capacity of 1300mAh. 

If you're seeking sniper rifle ammo with heavyweight and tight tolerances made from biodegradable materials, BLS 0.40g 6mm Perfect BIO BBs are an excellent choice! These 0.40g sniper BBs boast a highly polished surface for smooth feeding and maximum accuracy, made even better with ultra-tight tolerances of only +/- 0.01 and weight differences not exceeding 0.01g between individual BBs. This resealable bag contains approximately 1000 BBs. 

Being made from biodegradable polymer makes these BBs ideal for outdoor skirmishes and backyard shooting, minimising cleanup and keeping the skirmish site happy and healthy. If your site is strict about bio BBs and you want to maintain your sniper rifle's superb accuracy, BLS 0.40g 6mm Perfect BIO BBs are what you're looking for!

This is the smallest Airsoft MOSFET on the market! It grants you a better rate of fire and trigger response, as well as protecting the mechanical trigger contacts in your AEG, as electrical currents bypass them and go straight to the motor. The MOSFET is so compact that it can be fitted to pretty much any Airsoft AEG.

It attaches to the wiring of your gun and will require some expert knowledge and skills to fit. Make sure you know what you're doing before installation! Also included in the package is a heat shrink, so you can keep this MOSFET safe after you have installed it.

If you're after a slim stick battery for a top-wired AK, the Giant Power 11.1V 1500mAh 25C LiPo Slim Stick Battery will do the trick! Ideal for slim and long battery compartments in top-wired AK replicas, this LiPo battery measures approximately 16.5cm x 1.5cm x 1.6cm, with a 5cm wire length, and is pre-wired to a Deans/T-plug battery connector. This battery can also be used in M16A1 or A2 fixed stocks and AR buffer tubes, though you will be unable to collapse the stock when installed in a standard buffer tube. 

Please note: 11.1V LiPo batteries can cause pre-engagement in AEGs at UK power levels. This can result in internal damage. Please ensure you only use 11.1V batteries in AEGs designed for them (see "Specifications" on our AEG product pages for battery recommendations). 

If you're after a flat nunchuck, aka butterfly battery for an AR-36 or M4A1 polymer handguard, the Giant Power 11.1v 1500mAh 25C LiPo Flat Nunchuck Battery is ideal. Designed for AR-36 and M4A1 handguards but capable of fitting in various unconventional battery compartments, this LiPo battery measures approximately 9.5cm x 2.9cm x 0.6cm (per cell), with a 5cm wire length, and is pre-wired to a Deans/T-plug battery connector. This battery can also be used in M16A1 or A2 fixed stocks, AK fixed stocks or any other platform with a decently sized fixed stock battery compartment. 

Please note: 11.1V LiPo batteries can cause pre-engagement in AEGs at UK power levels. This can result in internal damage. Please ensure you only use 11.1V batteries in AEGs designed for them (see "Specifications" on our AEG product pages for battery recommendations). 

If you're looking for a battery for an AR36 or SMG-5 handguard, this is the one! The Giant Power 7.4V 1500mAh 25C LiPo Flat Nunchuck Battery is ideal for AEG handguards and fixed stock, measuring approximately 9.5cm x 2.8cm x 0.6cm (per cell) with a 5cm wire length, and is pre-wired to a Deans/T-plug connector.

This 7.4V LiPo consists of 2 cells configured as two cell groups, with a 25C continuous discharge rate and a capacity of 1500mAh.

If you want stealthy styling for your SSG96 sniper rifle, this is the adapter you need! Constructed from aluminium and providing 14mm CCW male barrel threading at the tip, this suppressor adapter fits both the SSG96 MK1 and SSG96 MK2, allowing tracer units, suppressors or alternative muzzle devices to be mounted with ease.

To install the adapter, simply unscrew the front cap from your barrel and screw the adapter on in its place. You're now ready to go silent with your SSG96!

If you are building a Hi-capa to suit your own style and needs, consider this to add some unique looks to your popular pistol! Introducing the Airsoft Masterpiece EDGE Custom "Twister" Guide Rod for TM Hi-capa 4.3 GBB, a CNC machined aluminium guide rod with a fancy fluted "Twister" design! This guide rod is finished perfectly, with a smooth friction-reducing anodised finish applied to ensure the beautiful colours stand the test of time and that your recoil spring does not hang up, causing a reduction in cyclic rate.

If you're feeling that carry handle vibe and want an optic on top, the Airsoft Artisan T1/T2 Red Dot Mount for M4A1/M16 Carry Handle is what you need. Following the real steel trend of mounting modern optics to the old school AR carry handle, this mount is made from CNC-machined aluminium with the Aimpoint Micro mounting standard/footprint, making it compatible with most T1 and T2 clones, along with other optics with the same footprint.

This mount is compatible with practically any M4/M16 carry handle, including A1 and A2 fixed carry handles and M4A1/M16A4 removable carry handles. Please note, depending on which optic you choose, you may need to source longer screws to attach your optic to this mount to guarantee compatibility. If you're working on an old meets new build, the Airsoft Artisan T1/T2 Red Dot Mount for M4A1/M16 Carry Handle is an essential part!

If you've got a HASTA Large Wheeled Rifle Hard Case and need replacement foam, this is it! The HASTA Foam for Large Wheeled Rifle Hard Case is pre-cut to fit the aforementioned case perfectly, making it an easy replacement for damaged foam.

If you're rocking the wave foam version and you're after a more professional, fitted look, the PnP foam will do what you need! Likewise, if you've made a mess of your original PnP foam or it has become dirty or scruffy with use, this fresh set of fitted foam in PnP or Wave/Eggbox form will have your HASTA case setup looking fresh once again!

If you want to improve your 5.1 Hi-Capa's accuracy, range and consistency, a barrel upgrade is a great start! The Laylax Nine Ball 6.00mm Steel Tightbore Inner Barrel is a huge improvement over stock 6.03mm brass tightbore barrels, and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for Tokyo Marui Hi-Capas and clones and should fit most of them, provided they are 5.1 editions. This barrel has an inner diameter of 6mm, which means that you will have to use high-quality BB ammo to ensure no blockages. However, when used with a high-quality BB, you will have the most consistent performance available, as there will be next to no air loss when shooting.

If you're after World War 2 replica gear to get the look to match your primary, the 8Fields Tactical US WW2 M1 Garand Rifle Cartridge Belt will do the trick! A highly authentic replica of the real US G.I. M1 Garand cartridge belt designed to hold real steel 8-round Enbloc clips, this belt kit is made from cotton canvas with steel hardware, just like the real thing!

Being sized to fit real Enbloc clips, the pouches on this belt unfortunately don't fit Airsoft M1 Garand magazines, though they can still be used for smaller items and filled out to give your loadout a more realistic look. Sizing-wise, this belt can fit any waist size up to 43 inches and can be adjusted by sliding the belt through the steel loops on the inside. If you're working on a US G.I. loadout, the 8Fields Tactical US WW2 M1 Garand Rifle Cartridge Belt is essential!

Designed to make your gas Airsoft RIF more consistent between every shot and work far better in colder conditions. You will also achieve an increase in FPS but you must let the gas settle in your magazine first!

A replica of the JPC Jump Plate Carrier, designed to be as compact and lightweight as possible whilst still providing the same functionality as a traditional plate carrier system. 

A replica of the JPC Jump Plate Carrier, designed to be as compact and lightweight as possible whilst still providing the same functionality as a traditional plate carrier system. 

A replica of the JPC Jump Plate Carrier, designed to be as compact and lightweight as possible whilst still providing the same functionality as a traditional plate carrier system.