Build the Ultimate SMG-5 Loadout!

An Airsoft 6mm replica SMG-5 SD6, manufactured by Jing Gong. Comes supplied with an integrated suppressor for looks and to slightly dampen muzzle report.

The JG M5 SD5 is an integrally suppressed SMG-5 AEG featuring a polymer body and full sized battery stock. A very popular style of Airsoft rifle due to its widespread use by sneaky types of many militaries, great for some discrete CQB kills! 

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ II ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus  purple hop rubber was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ II ETU. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

An Airsoft electric powered 6mm SMG-5K replica with a full metal construction; the best friend to any close protection worker, movie bad guy, SAS operative or secret agent on skis!

The sneaky counterpart to the Bolster Tuned CM.041 upgraded SMG-5 AEGs has returned and it's better than ever! Enter the CM.041 SD5 SMG-5 Upgraded Edition; a full metal SMG-5 SD5 replica built by the same team behind the ultra-high-end Bolster Armouries AEG series and previous Bolster Tuned AEGs.

As with its less discrete brethren, the first thing the Bolster Armouries team do with the CM.041 SD is to tear it to pieces and build it back up to fulfil its true potential. This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, and a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware.

The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Bucking was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the Bolster Tuned CM.041 SD5 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 SD to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041 SD! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

For a machine pistol it doesn't get more compact than this! 

Perfect for those tightly spaced CQB environments. Used in such Hollywood films such as Taken and Air Force One, this iconic SMG is instantly recognisable and makes for a great Airsoft replica.

This variant comes with a quad 20mm RIS / RAS rail on the front handguard with the top rail extending along the length of the top of the gun, so you can customise to your hearts content with a variety of accessories.

With full metal construction, this replica has a realistic feel to it and is a great choice for beginner and veteran Airsofters alike.

If you're after the MP5 vibe in an ultra-modern package, the G&G Armament TGM R5 SMG-5 GT Advanced AEG is one to watch! A cutting-edge reinterpretation of the classic German SMG design, the TGM R5 keeps the iconic silhouette and adds more ambidextrous features, modern M-LOK and 20mm Picatinny attachment interfaces, a new ergonomic lower receiver design and a flared magazine well for speedy reloads under pressure.

A full metal build with a gorgeous stamped steel receiver, the TGM R5 is also kitted out on the inside and 11.1V LiPo ready, as is the G&G standard. The Version 2 gearbox boasts a reinforced shell, 18:1 ratio steel gears running on 8mm ball bearing bushings, a quick-change spring guide for easy power tuning and the beastly 25K Orange IRFIT high-speed motor delivers the speed for an incredible trigger response and rate of fire. The G&G MOSFET/ETU system further cranks up electrical efficiency and allows the burst mode fire selector position to be programmed for either 3 or 5 round bursts, while providing pre-cocking for when semi-auto speed is a priority.

A radical reinterpretation of one of history's most popular submachine guns, which still serves with law enforcement and military units around the world, G&G had a hard task doing justice to the original design, but we think they smashed it. If the lack of modern attachment interfaces and retro looks turns you off getting a regular SMG-5/MP5, the G&G Armament TGM R5 SMG-5 GT Advanced AEG was made with you in mind!

An Alloy construction Mid-Cap Magazine for SMG-5 Airsoft Electric Guns which is filled from the top using an Airsoft  Speedloader, and feeds BBs into your replica until empty, with no rattle. It is compatible with a wide range of brands and holds a total of 130rnds. 

A 130rnd Mid-Cap Magazine for SMG-5 Platform Airsoft Guns, fitting CYMA, Classic Army, SRC, JG and Tokyo Marui standard replicas. This modern-style Magazine is reminiscent of the 'P-Mag' style design, and features Mock Bullets / Dummy Ammunition visible through a window on the side of the Magazine. Whether you run a modern SMG-5 loadout, or you want to add a tactical 'touch' to your Airsoft Gun, then the CYMA 130rnd Polymer SMG5/SMG5K Magazine is perfect for the task.

If you have a buckle up compatible chest rig, plate carrier or tactical vest and an SMG, one of these can make your life much easier! The 8Fields Tactical Buckle Up Quad SMG mag pouch can fit MP5/SMG-5, UMP, MP7 or UTR45 magazines inside and allows you to quickly swap this front panel with other buckle up panels so you can switch primaries mid game without having to mess with MOLLE or bring two rigs.

If you have a buckle up compatible chest rig, plate carrier or tactical vest and an SMG, one of these can make your life much easier! The 8Fields Tactical Buckle Up Quad SMG mag pouch can fit MP5/SMG-5, UMP, MP7 or UTR45 magazines inside and allows you to quickly swap this front panel with other buckle up panels so you can switch primaries mid game without having to mess with MOLLE or bring two rigs.

If you have a buckle up compatible chest rig, plate carrier or tactical vest and an SMG, one of these can make your life much easier! The 8Fields Tactical Buckle Up Quad SMG mag pouch can fit MP5/SMG-5, UMP, MP7 or UTR45 magazines inside and allows you to quickly swap this front panel with other buckle up panels so you can switch primaries mid game without having to mess with MOLLE or bring two rigs.

If you have a buckle up compatible chest rig, plate carrier or tactical vest and an SMG, one of these can make your life much easier! The 8Fields Tactical Buckle Up Quad SMG mag pouch can fit MP5/SMG-5, UMP, MP7 or UTR45 magazines inside and allows you to quickly swap this front panel with other buckle up panels so you can switch primaries mid game without having to mess with MOLLE or bring two rigs.

If you have a buckle up compatible chest rig, plate carrier or tactical vest and an SMG, one of these can make your life much easier! The 8Fields Tactical Buckle Up Quad SMG mag pouch can fit MP5/SMG-5, UMP, MP7 or UTR45 magazines inside and allows you to quickly swap this front panel with other buckle up panels so you can switch primaries mid game without having to mess with MOLLE or bring two rigs.

If you're switching up your loadout for an SMG-based kit, the 8Fields Tactical MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch will suit you well. This quad magazine pouch mounts to MOLLE webbing loops and is sized to fit the front of most plate carriers, offering adjustable retention so you can loosen the fit for a faster draw or tighten it down for more security. 

The MOLLE Quad SMG pouch is constructed from 1000D polyester, offering strength and water resistance thanks to its high stitch density. The adjustable retention also allows most SMG mags to fit in, including UTR45, UMP, SMG-5, AR-9, VMP-1 and extended pistol mags. If you're rocking an SMG and need somewhere to stash your spare mags, the MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch from 8Fields Tactical is what you need!

If you're switching up your loadout for an SMG-based kit, the 8Fields Tactical MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch will suit you well. This quad magazine pouch mounts to MOLLE webbing loops and is sized to fit the front of most plate carriers, offering adjustable retention so you can loosen the fit for a faster draw or tighten it down for more security. 

The MOLLE Quad SMG pouch is constructed from 1000D polyester, offering strength and water resistance thanks to its high stitch density. The adjustable retention also allows most SMG mags to fit in, including UTR45, UMP, SMG-5, AR-9, VMP-1 and extended pistol mags. If you're rocking an SMG and need somewhere to stash your spare mags, the MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch from 8Fields Tactical is what you need!

If you're switching up your loadout for an SMG-based kit, the 8Fields Tactical MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch will suit you well. This quad magazine pouch mounts to MOLLE webbing loops and is sized to fit the front of most plate carriers, offering adjustable retention so you can loosen the fit for a faster draw or tighten it down for more security. 

The MOLLE Quad SMG pouch is constructed from 1000D polyester, offering strength and water resistance thanks to its high stitch density. The adjustable retention also allows most SMG mags to fit in, including UTR45, UMP, SMG-5, AR-9, VMP-1 and extended pistol mags. If you're rocking an SMG and need somewhere to stash your spare mags, the MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch from 8Fields Tactical is what you need!

If you're switching up your loadout for an SMG-based kit, the 8Fields Tactical MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch will suit you well. This quad magazine pouch mounts to MOLLE webbing loops and is sized to fit the front of most plate carriers, offering adjustable retention so you can loosen the fit for a faster draw or tighten it down for more security. 

The MOLLE Quad SMG pouch is constructed from 1000D polyester, offering strength and water resistance thanks to its high stitch density. The adjustable retention also allows most SMG mags to fit in, including UTR45, UMP, SMG-5, AR-9, VMP-1 and extended pistol mags. If you're rocking an SMG and need somewhere to stash your spare mags, the MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch from 8Fields Tactical is what you need!

If you're switching up your loadout for an SMG-based kit, the 8Fields Tactical MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch will suit you well. This quad magazine pouch mounts to MOLLE webbing loops and is sized to fit the front of most plate carriers, offering adjustable retention so you can loosen the fit for a faster draw or tighten it down for more security. 

The MOLLE Quad SMG pouch is constructed from 1000D polyester, offering strength and water resistance thanks to its high stitch density. The adjustable retention also allows most SMG mags to fit in, including UTR45, UMP, SMG-5, AR-9, VMP-1 and extended pistol mags. If you're rocking an SMG and need somewhere to stash your spare mags, the MOLLE Quad SMG-5/UTR45/UMP/AR-9/VMP-1 Magazine Pouch from 8Fields Tactical is what you need!

Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!

This high capacity magazine is designed for SMG-5 AEGs and holds a whopping 570rnds, much more than any other SMG-5 magazines. It is filled from the top of either magazine by pulling back the mock bullets or opening the fill window, and wound from the bottom clockwork wheel to feed BBs.

Holding up to 3 magazines at a time within the Velcro secured pouches, and being capable of attaching onto any vest, belt or rig which is MOLLE Compatible, this pouch is perfect for SMG-5 users.

Holding up to 3 magazines at a time within the Velcro secured pouches, and being capable of attaching onto any vest, belt or rig which is MOLLE Compatible, this pouch is perfect for SMG-5 users.

Holding up to 3 magazines at a time within the Velcro secured pouches, and being capable of attaching onto any vest, belt or rig which is MOLLE Compatible, this pouch is perfect for SMG-5 users.

Holding up to 3 magazines at a time within the Velcro secured pouches, and being capable of attaching onto any vest, belt or rig which is MOLLE Compatible, this pouch is perfect for SMG-5 users.

A fabric magazine pouch designed to hold SMG-5 and SMG-7 magazines once adjusted by the Velcro front panels and is fully MOLLE compatible. 

A fabric magazine pouch designed to hold SMG-5 and SMG-7 magazines once adjusted by the Velcro front panels and is fully MOLLE compatible. 

A fabric magazine pouch designed to hold SMG-5 and SMG-7 magazines once adjusted by the Velcro front panels and is fully MOLLE compatible. 

A fabric magazine pouch designed to hold SMG-5 and SMG-7 magazines once adjusted by the Velcro front panels and is fully MOLLE compatible. 

A fabric magazine pouch designed to hold SMG-5 and SMG-7 magazines once adjusted by the Velcro front panels and is fully MOLLE compatible.