All Two-Tone Airsoft Guns

If your pistol isn't cutting it, perhaps you need a bigger sidearm! Enter the VORSK VMP-1C, the compact variant of the VMP-1 gas blowback SMG. The VMP-1C takes the original and deletes the stock and muzzle device for a more compact form ideally suited to CQB and use as a sniper or support gunner's backup platform.

Like the original, the VMP-1C is constructed almost entirely from high density polymer with an alloy outer barrel and steel trim parts, giving you a lightweight, bite-sized platform with a full-size punch. Inside, the platform boasts a 6.03mm tightbore inner barrel for an edge in accuracy, despite its short barrel length. The stunning rate of fire of the original has been maintained, making this lil SMG great for laying down covering fire as you relocate to a more advantageous firing position. If you need a secondary with more firepower than the average, the VMP-1C is ideal for your needs!

If you're all about your modern M4/AR-15 platforms, the Double Eagle M920A Aeroknox AX//15 AEG is certain to catch your eye. This full metal M4/AR-15 platform sidesteps convention with a unique receiver, handguard, muzzle brake and pistol grip based on designs from Aeroknox LLC of Texas, with official licencing of course!

In line with other recent Double Eagle releases, the AX//15 boasts the impressive FALCON EFCS MOSFET pre-installed, giving the AEG an astonishing trigger response and rate of fire thanks to the improvements in electrical efficiency along with the ability to program the fire controls for burst modes, binary trigger and trigger sensitivity. These features are usually only found in AEGs twice this price! While it shoots like a dream, the AX//15 looks even better, with immaculately engraved Aeroknox trademarks across the design, flawlessly machined metal components and strong high density polymer furniture.

While high-end AR AEGs with interesting looks are a pound a penny these days, the AX//15's combination of slick ergonomics, gorgeous looks, phenomenal performance and great value for money make it a Patrol Base favourite. Make sure you get yours before we buy them all for ourselves!

If you need a sneaky primary for mid to long-range, the Delta Armory DA-A10-ETU ALPHA™ Silent Ops DMR M4/AR-15 AEG should be on your shopping list. This full metal M4/AR-15 AEG boasts Delta Armory's best internals yet, kitted out on the inside with Delta's programmable MOSFET/ETU system, a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, and a high torque motor. The Delta MOSFET/ETU offers the option of 3 or 5-round burst, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself.

Externally, this beast is ready for DMR duty, boasting a lengthy KeyMod handguard for accessories and an integral suppressor for that stealthy styling. Add an LPVO scope and the look is complete, whether you're going for a full high-FPS DMR build or simply seeking an accurised assault rifle. If you like integrally suppressed AR builds and are looking for a longer alternative to the common short configurations, the Delta Armory DA-A10-ETU ALPHA™ Silent Ops DMR M4/AR-15 AEG is a fantastic choice!

If you're looking for a full metal AR with modern styling, the CYMA Platinum CM.097B M4/AR-15 AEG; Kestrel Basic ETU is a fine choice! Part of the newly revamped CYMA Platinum line, the CM.097B boasts the same reinforced high-speed internals as the original with the EShooter Kestrel Basic MOSFET added to the mix. 

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off! 

Even better than the original when it comes to downrange effect while maintaining the superb external quality CYMA Platinum is known for, the CM.097B is a fantastic intermediate option with sleek modern styling and plenty of pre-upgraded parts. If you're ready to let rip with a cutting-edge full metal AR, the CYMA Platinum CM.097B M4/AR-15 AEG; Kestrel Basic ETU is calling your name!

If you are into WW2 reenactment and you have your sights set on a Red Army loadout S&T have a real treat for you! The Mosin-Nagant M1891/30 Spring Bolt-Action Rifle Replica is an almost flawless replica of the real M1891/30 Mosin-Nagant which served the Soviet Red Army throughout WW2 and has solidified its place in history thanks to the huge volume of these rifles produced and its fanbase in the US civilian firearms world.

S&T's Mosin replica follows the same format as its superb M1903 Springfield, Lee-Enfield S.M.L..E and Kar98k replicas, boasting a gorgeous antique finish on its metal components and beautiful real wood furniture to make a rifle that would be equally at home in a museum as it would be on the skirmish field. From a performance standpoint, the Mosin-Nagant is no slouch, coming out of the box shooting at 360 FPS with a smooth bolt pull and compatibility with VSR-10/GBB type inner barrels and HOP-up rubbers. If you need a Mosin-Nagant that shoots as good as it looks, this is the one to choose!

With this simple trick, you can turn one gun into two guns! The M203 under-barrel grenade launcher: heavy, manly, and ready to shower an unlucky opponent with a cloud of BBs! This is the 12 Inch full-sized variant, ideally suited to mounting to an M16 or M4A1 with a 14.5 inch barrel, though it will fit all M4 variants and anything with a 20mm rail on the handguard (or elsewhere, heretics!) with the included adaptor.

An Airsoft Electric Pistol which is based on the 226 series Pistols, and features a MOSFET for a rapid rate of fire and consistent performance.

An Airsoft Electric Pistol which is based on the 226 series Pistols, and features a MOSFET for a rapid rate of fire and consistent performance.

If you have a thing for the B9 design, you are not alone. The issue is, the B9 platform is becoming more and more popular, and it is hard to find a real head turner with B9 styling. Well...until now! Introducing the Vorsk VM9 OSIRIS, a B9 variant you probably haven't seen before! Based on a pistol designed for the US Navy SEALs, the OSIRIS is a B9 with a new strengthened slide design with its own unique style and a hidden full-auto fire mode!

A full metal spring powered pump action Airsoft 6mm shotgun that is tri-barrelled and comes with a sawn-off style pistol grip as standard.

The Double Bell MK12 MOD1 SPR is a 'Special Purpose Rifle', based on the AR Platform and constructed from a mix of Steel, Aluminium and Polymer. This Airsoft Electric Gun is built upon a Version 2 Gearbox that features a Quick Release Spring, allowing you to change the Main Spring without having to fully disassemble the Gearbox. This is an ideal choice for those looking for a base platform for a DMR project, or for someone looking to do a modern-day American Forces loadout.

An AR36 Platform Airsoft Electric Gun that features a tonne of custom external furniture out of the box. The highlights of this lineup are a Quick Change Spring System, M4 Magazine Adapter, Sliding Crane Stock and an included Suppressor on a 14mm CCW Thread. If you want an AR36 Platform Rifle but also want the ability to share Magazines with friends/your squad as well as having a pretty unique Rifle out of the box, then the G608-8 AR36 Railed w/ Suppressor is ideal.

If you're looking for an affordable MK18 MOD.1 platform for a build project or Milsim loadout, the Delta Armory DA-GP-B15 BRAVO™ MK18 MOD.1 M4/AR-15 AEG is one to watch. This variant of Delta's MK18 is a little different than the previous version, now equipped with a standard Milspec receiver shape and Crane stock with licenced trademarks from GrandPower Firearms.

Inside, the DA-GP-B15 is equipped with the same internals as other BRAVO™ platforms, including an SHS tappet plate, SHS piston with a full steel tooth rack, 7mm ball bearing bushings and a reinforced gearbox shell with a quick change spring guide. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

Externally, the DA-GP-B15 build style follows the standard BRAVO format, with a CNC aluminium handguard, alloy outer barrel with a high density polymer receiver and buffer tube. This means it tips the scales at far less than a full metal MK18 but still has realistic weight distribution; perfect for those who want to mount the kitchen sink to their primary without compromising in-game agility. If you like the Milspec MK18 aesthetic but prefer to fight easy, the Delta Armory DA-GP-B15 BRAVO™ MK18 MOD.1 M4/AR-15 AEG should suit you perfectly!

If you feel the need to arm yourself with a "noob tube" for Airsoft, a fine replica of the latest and greatest 40mm grenade launcher to be issued to both the US Army and UK Special Forces will be of interest! The S&T M320A1 is a highly modern launcher sporting ambidextrous functionality, side mounted grenade launcher ladder sights and robust yet relatively lightweight construction.

The true benefit of the M320 platform is that it can be used either as a stand-alone launcher, with its included sliding adjustable stock, or as a weapon-mounted launcher with the stock removed to reveal its integral 20mm Picatinny mounting apparatus. Swapping between the two configurations takes mere seconds, so if you are the indecisive type of grenade launcher user this will suit you well!

If you're a discrete skirmisher in search of an AEG which can be an assault rifle one day and a DMR the next, check out the Delta Armory DA-A10-EGL ALPHA™ SilentOps DMR M4/AR-15 AEG! This full metal ALPHA™ line AEG is rocking the latest and greatest MOSFET/ETU from Delta Armory, known as the EAGLE™, and is dressed to impress on the outside with a CNC aluminium KeyMod handguard, integral suppressor and the latest Delta Armory furniture.

The EAGLE™ ETU adds a whole new level of functionality to the Silent Ops DMR setup. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking. The result is an incredibly advanced M4 AEG with the option to quickly change the spring, lock to semi and run it as a DMR without needing extensive internal work!

The EAGLE™ joins the reinforced gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving you impressive performance and advanced features for a respectable price point. If you've always fancied a DMR but want a flexible setup in case you change your mind, the Delta Armory DA-A10-EGL ALPHA™ SilentOps DMR M4/AR-15 AEG is the ideal does-it-all platform for you!

If you usually run an M4/AR-15 platform and you want familiar controls in a platform which looks like nothing else out there, the Zion Arms PW9 Long Handguard is definitely worthy of your scrutiny. This pre-upgraded AR9 SMG platform boasts full metal construction, making use of CNC machined 7075 T6 aluminium in its handguard and receiver for top-tier build quality, high strength and low weight.

On the inside, the PW9 is equally impressive. Featuring a 6.03mm tightbore inner barrel, 8mm ball bearing bushings, a quick change spring system and the Zion Arms Nebula ETU/MOSFET, allowing for burst mode, binary trigger or semi-auto only to be programmed using the fire controls of the gun itself. A 19K RPM high speed motor gives it the speed to compete, and the Nebula makes this even better thanks to its compatibility with 11.1V LiPo batteries. If you need a lightweight yet rock-solid primary which is ready to go toe-to-toe with the best, the Zion Arms PW9 Long Handguard will be an asset to your gameplay!

If you usually run an M4/AR-15 platform and you want familiar controls in a platform which looks like nothing else out there, the Zion Arms PW9 Long Handguard is definitely worthy of your scrutiny. This pre-upgraded AR9 SMG platform boasts full metal construction, making use of CNC machined 7075 T6 aluminium in its handguard and receiver for top-tier build quality, high strength and low weight.

On the inside, the PW9 is equally impressive. Featuring a 6.03mm tightbore inner barrel, 8mm ball bearing bushings, a quick change spring system and the Zion Arms Nebula ETU/MOSFET, allowing for burst mode, binary trigger or semi-auto only to be programmed using the fire controls of the gun itself. A 19K RPM high speed motor gives it the speed to compete, and the Nebula makes this even better thanks to its compatibility with 11.1V LiPo batteries. If you need a lightweight yet rock-solid primary which is ready to go toe-to-toe with the best, the Zion Arms PW9 Long Handguard will be an asset to your gameplay!

If you're an AK fan and you are looking for something bigger, the RPK is what you need! The CM.052A RPK-74M is a faithful replica of the latest variant of the RPK light support weapon, a lengthened and strengthened AK47 based design intended to provide a high volume of fire and increased accuracy at squad level. The CM.052A sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and modern polymer furniture matching that which is currently issued to Russian armed forces. The RPK-74M takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45 round style high cap magazine which holds a whopping 800 BBs!

If you are a real Dragunov fan, nothing beats steel and real wood! The CYMA CM.057 is widely known to be the best replica of the iconic Dragunov SVD DMR rifle and this version has gorgeous real wood furniture which is a fantastic match for the plywood which adorned the original SVD when it was first issued. The CM.057 boasts full metal construction with a large proportion of steel in its build, giving it a reasonable and realistic weight without making this Dragonov a drag (hehe) to carry around all day!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 690mm inner barrel to make the SVD a great base platform for a DMR build. If you are after a long-range platform and want something with hints of modernity combined with the retro looks of real wood, the CM.057 should be at the top of your list!

If you love cutting-edge, unconventional platforms, the KRISS® Vector must be on your list! This, the KRYTAC KRISS® Vector V2 AEG is the latest Vector AEG, equipped with refined internals with the same phenomenal build quality as the original. 

If you love cutting-edge, unconventional platforms, the KRISS® Vector must be on your list! This, the KRYTAC KRISS® Vector V2 AEG is the latest Vector AEG, equipped with refined internals with the same phenomenal build quality as the original. 

If size matters to you, the ST200 will be right up your street! This absolutely massive Sniper Rifle replica is patterned after the real steel Cheytac M-200 Intervention rifle chambered in the whopping .408 CheyTac cartridge, offering better accuracy and range than even the Barrett M82! This rifle has a special place in all our hearts thanks to its starring role in the movie Shooter(2007), alongside Mark Wahlberg.

The S&T replica is constructed almost entirely from CNC-machined aluminium with the trim parts being steel and the ergonomic "Target" grip made from high density polymer. Amongst the ST200's tricks are the ability to be quickly disassembled, compatibility with AEG standard upgrade springs, inner barrels and HOP-up buckings and rocking an integral Bipod and Monopod, allowing this hefty beast to be supported properly for improved accuracy and stability.

Make no mistake, this rifle is absolutely huge and very, very heavy; tipping the scales at a massive 7KG unloaded and without a scope, and measuring in at 1.4 meters fully deployed. You have to be a special kind of Airsofter to run one of these in a skirmish, but if you have what it takes, here is your chance!

A non-blowback Airsoft 6mm BB Electric Pistol which is based upon some of the World's most popular pistols, with all of the best bits taken and combined to create one unique pistol which is highly ergonomic.

A Pump Action Airsoft 6mm BB Shotgun, part of CYMAs extensive CM.350 range, based on the real world M870 pump action tactical shotgun. 

If you love the looks of a 1911 but want Hi-capa performance, the RAVEN R14 Hi-capa GBB Pistol w/BDS Red Dot Sight is what you need. Based on the real steel Para Ordnance P14, this Hi-capa platform has the discrete looks of the venerable 1911 with its metal frame and textured grips but takes Hi-capa magazines, giving you the best of both worlds.

The advantage of a Hi-capa mag is its enormous gas reservoir, allowing for great performance under rapid fire and handling cold weather far better than the realistic but very slim 1911 mag. With a full metal build, a 6.03mm tightbore inner barrel pre-installed and a BDS red dot sight sitting on top of the slide for faster target acquisition, the RAVEN R14 w/BDS Red Dot Sight pairs a gorgeous retro aesthetic with modern, combat-ready features!

I you're looking for some shotgun fun for CQB or as a cheeky sidearm to knockabout with, this budget friendly shotty comes with some nifty features, such as single shot pump action, a 20mm railed upper barrel and body, as well as adjustable HOP-up and two sling plate attachments.

Cheap thrills don't come much better than this!

If your sidearm tastes dictate style but you're on a tight budget, the Armorer Works VX7 Mod 3 EU17 GBB Pistol is ideal. A spicy-looking alternative to the rather bland EU17, the VX7 is dressed to impress with a stylish custom slide and ergonomic frame, all for far less money than its boring brethren!

The P80 frame is one of the most popular upgrades for real steel Glocks, offering an undercut trigger guard, extended beavertail and a full 20mm Picatinny frame rail, enhancing ergonomics and offering broader compatibility with flashlights and laser aiming modules. Up top, the unique Armorer Works slide boasts angled front and rear serrations, anti-glare texture on the top, stylish ports at the front and weight-reduction cuts for a slick, custom look. Inside the slide, the internals are WE EU-series spec, meaning an extra-large blowback unit which provides violent recoil, much heavier than most of its rivals.

If you were looking for an excuse to expand your pistol collection or you need a budget sidearm which is ready to rock, the VX7 Mod 3 EU17 GBB Pistol is a fantastic choice. With top-shelf looks at bargain-bin prices, the VX7 Mod 3 its one of the best value sidearms on the market at the moment!

The Specna Arms SA-C17 CORE™ HAL¹ ETU™ M4/AR-15 AEG is beautiful. It features Strike Industries licensing on its unique M-LOK handguard, adding to the realism of this mighty fine platform. Its compact nature makes it perfect for close-quarters battles, a versatile and lightweight replica which can be easily manoeuvred around the battlefield is exactly what you need to win!

This SA-C17 is rocking Specna's HAL¹ ETU, it boasts programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a super affordable Airsoft gun!

If you like a sidearm that looks simple but grabs attention when you pull the trigger, the KJ Works M1911A1 GBB Pistol; CO2 Version will do exactly that! Boasting full metal construction and a Tokyo Marui-based internal build, the highlight of this 1911 platform is its incredible recoil, booming muzzle report and very impressive rapid-fire performance. Most green gas-powered 1911s suffer from a small gas reservoir restricting their consistency under rapid fire but we are happy to report that the KJ Works M1911A1 is exceptional in this regard.

Based on the real steel M1911A1, the 1911 variant issued during WW2, the Korean War and the Vietnam War, this is the variant to go for if you're running a retro primary. If you prefer a sidearm which is simple and effective with a side of old-school cool, the KJ Works M1911A1 GBB Pistol; CO2 Version is exactly that!

The pinnacle of high quality & authentic airsoft replica's is here, UMAREX Presents the GLOCK 34 Gen4 Co2 Deluxe Kit. If you're a firearm fanatic who's mad about getting as close to the real deal as possible, you've come to the right place.