Airsoft Boneyard

This replica has found its way into our boneyard due to an issue with the hammer resetting - you can manually cock the hammer using the external hammer and fire the replica however using the trigger itself results in failure. When the replica does shoot, we were seeing an average of 270 FPS on .2 BB's using Abbey Predator Ultra Green Gas.

We also discovered that the magazine is quite difficult to insert into the replica during testing and requires you insert the mag at a weird angle which will also need looking at.

This replica has found its way into our boneyard for a few reasons - first of which is part of the housing that holds the spring for the external hammer has broken which means the slide cannot be secured in place since this is what holds the slide and frame together. Alongside this, the replica is missing its battery and charger meaning we cannot test for any faults and to see if the replica is functional so you'll have to prepare for this if you source replacements. If the replica is non-functional, it could work as a prop for cosplay or even be a parts donor if it is functional.

This replica has landed in our boneyard due to supposedly not being functional - we cannot verify if this the case however due to the battery and charger being missing meaning we have no method to test the replica. With this in mind if you do receive this platform and it's not functional, it could be perfect as a prop for cosplay or even as a parts donor.

This replica has landed in our boneyard due to a few issues - first of which is that the tabs that secure the slide in place have snapped off completely meaning theres nothing to secure the slide and will fall off during use. Alongside this, it's missing its battery and battery charger so we cannot test its functionality so you could ultimately end up with a perfectly fine replica or something that needs some work doing to it internally. Apart from this; the replica used to be two-tone red but the paint was stripped - there is still residue red paint under the slide alongside in the serrations so this replica does need a bit of TLC.

This replica has found its way into our boneyard for unknown reasons - we cannot determine what the issue is due to the missing battery and charger. You could otherwise use this replica for parts or if you have a spare AEP battery and the replica works, it could be a decent sidearm if you're going for a post-cold war US Army loadout - even if the replica has some sort of fault, it can still double as a prop.

This replica has found its way into our boneyard due to a faulty trigger - we're not sure what component is at fault as it could be one of many things such as a broken trigger linkage or a broken component within the trigger group - further investigation is required to determine the sauce of the fault. Other than this though, the replica is in really good condition so ultimately this could double as a wall hanger if you're into your Rugers.

This replica has landed in our boneyard due to damage to the magazine base plate - the front portion of the base plate has snapped off however this won't affect functionality of the replica; other than this, there isn't any other faults addressed - given it's a CO2 replica, we're unable to investigate any issues ourselves and will require investigation into potential faults that may possibly be present. Across the barrel there is a few marks and scratches alongside the grip so this replica does require some TLC.

This replica has landed in our boneyard for unknown reasons - as far as things go, we cannot test for any sort of fault that this replica may or may not have due to the charger and battery being missing. Given this situation; if there is faults then ultimately this replica may be more suitable as a prop for cosplay or even a parts donor.

This replica has landed in our boneyard due to a portion of the slide being chipped off - we're unsure how this has happened but ultimately doesn't affect functionality. Regarding function, we're unable to test for internal issues due to the battery and charger going missing so we cannot guarantee that the replica can actually shoot or has some weird electronic issue - if this is the case, this replica could ultimately serve as a parts donor or as some sort of prop.

This replica was returned to us with a cracked receiver. The crack is located towards the end of the receiver on the right side, and is significant enough to where the barrel assembly wobbles. We advise against using the replica as the damage is likely to worsen, and the rifle may break entirely. This thing would work better as a display piece or prop for the SVD fans out there...

This replica has found its way into our boneyard due to issues with the hop unit - opening the box, the hop unit is contained in a bag with some additional parts including a ball bearing, metal collar and a roll pin being secured with some masking tape to the box for safe keeping (these additional parts may or may not be associated with the hop unit so we recommend investigating this).

Due to this alongside missing the magazine, we're unable to test the replica for other faults so further investigation is required to find out all of the potential issues however quickly racking the slide presents us with a functional trigger alongside selector so ultimately this could be an easy re-assembly job.

This replica has landed in our boneyard due to the wires leading to the battery connector being cut - this ultimately means that the replica isn't functional unless these are replaced with new ones - despite this issue, the replica seems to be in mint condition so this would be perfect as a wall hanger or a prop for cosplay. The battery and battery charger are also missing so this only pushes this replica to be used as a prop or wall hanger even more.

This shotgun's action is jammed up - when you are able to free this, regardless of what you do you cannot cock the spring to fire the replica. The feed ramp release linkage is also broken, so you cannot access the chamber of the replica in order to load a shell. Ultimately, this replica may be better suited as a wall hanger / display piece.

This Desert Eagle AEP was shipped to us without its battery and charger required to get it shooting. The gun is brand new and still in its original box alongside its magazine and cleaning rod - just needs a new battery and charger sourcing and you'll be good to go! Whilst it is brand new, we unfortunately cannot guarantee full and flawless functionality from the platform due to its untested nature. Remember, this is being sold as a Boneyard item after all...

This Desert Eagle AEP was shipped to us without its battery and charger required to get it shooting. The gun is brand new and still in its original box alongside its magazine and cleaning rod - just needs a new battery and charger sourcing and you'll be good to go! Whilst it is brand new, we unfortunately cannot guarantee full and flawless functionality from the platform due to its untested nature. Remember, this is being sold as a Boneyard item after all...

This Desert Eagle AEP was shipped to us without its battery and charger required to get it shooting. The gun is brand new and still in its original box alongside its magazine and cleaning rod - just needs a new battery and charger sourcing and you'll be good to go! Whilst it is brand new, we unfortunately cannot guarantee full and flawless functionality from the platform due to its untested nature. Remember, this is being sold as a Boneyard item after all...

This replica has found its way into our boneyard due to the slide tabs being broken - this is what holds the slide to the frame when locked together but since they're broken, the slide isn't secure and will come off freely. Despite this, the replica is fully functional firing at 230 FPS on .2 BBs so if you can find a fix for the slide alongside a replacement battery and charger (since both are missing), this may be an ideal CQB platform. Otherwise this is also a valid option as a wall hanger or as a prop if you were to glue parts together.

This replica has found its way into our boneyard due to a few issues; first and foremost, the trigger seems to be broken as there's no spring tension - pulling the trigger all the way back whilst a battery is plugged in also provides nothing so whatever linkage/contacts are present is potentially also broken. The left side tab to keep the slide on the replica is broken as well though the right tab is still in one piece so you'll have to be careful when using this replica - keep in mind that you will need to source a battery and charger if you are wanting to use this replica since both are missing.

This replica has found its way into our boneyard due to the rear slide tabs breaking off completely - due to this fault, the slide freely comes off and isn't secure so you will have to replace the appropriate parts in order to bring this replica back to its former glory. Despite this, the replica is still fully functional when held together manually; firing at 235 FPS on .2 BBs. The charger and battery are also missing so these would have to be sourced in order to use this replica.

This replica has found its way into our boneyard due to an issue with the connector. As far as we can see, the positive connector has detached itself from the deans plug somehow and will need to be re-attached. Due to this issue, we're unable to test the replica for any further faults and we cannot guarantee that the replica is functional or not. Alongside the connector issue, the charger and battery are nowhere to be seen so these will need to be sourced.

This replica has found its way into our boneyard for unknown reasons; when investigating the replica, we found no obvious faults and was firing without issue - on our chronograph, we were seeing 235 FPS so as far as things go this is pretty much a fully functional platform that's just missing its battery and charger which a replacement would have to be sourced for both if you're wanting to use this long-term.

This iconic replica has landed in our boneyard for a missing its safety lever on the left side of the platform. Other than this, it's fully functional and we were quite surprised as to how it performed, firing at an average of 290 FPS on .2 BB's using Abbey Predator Ultra Green Gas, which is extremely consistent for a Desert Eagle platform. If you're wanting yourself an extremely fun platform that is TM-based and extremely cheap, then this may be the one for you!

This replica has landed in our boneyard due to issues surrounding the slide getting jammed every other shot. We're unsure what's causing this however when this happens, it ejects a BB from the mag and causes a BB to get stuck under the slide so this is something that needs fixing otherwise more issues may arise.

Regardless of this issue, firing through our chronograph gave us a reading of 215 FPS on .2 BBs. The safety lever is also broken where only the right side is functional whereas the left side does nothing meaning it's no longer ambidextrous. We've also discovered that the charger is missing so a replacement is to be sourced in order to keep using this replica long-term.

This replica has found its way into our boneyard due to issues regarding the EBB not locking back on last round - we're not entirely sure what's causing this but despite this problem, the replica is functional and is shooting BBs. We were seeing an average of 210 FPS on .2 BBs. The safety lever is also broken and only the right side is functional with the left side doing nothing. The charger is also missing so a replacement would have to be sourced in order to continue using this replica.

This item is being sold as a Boneyard as non-functional. The fuse has been tested and is working but the gun itself will not cycle. Cosmetically the gun is in pretty good condition and would make for a great project for someone in the know to work on or even a prop for a video/photo shoot!

This replica has appeared in our boneyard due to missing its barrel assembly; other than this, the selector is quite loose but functional and the magazine is missing so ultimately this could be used as a part donor for things like the trigger or BBU as both appear to be fully functional although further investigation would be necessary to see what's resulting in the loose selector lever.

This replica has found its way into our boneyard due to having a damaged nozzle - it appears that a small section at the top of the nozzle has snapped off; the nozzle itself also struggles to return back into its BBU suggesting that the spring may be damaged too or just lacks lubrication to smoothly return.

Apparently the magazine leaks as well so this would have to be investigated. Externally the replica is in good condition so ultimately you could have this as a wall hanger if you're into desert eagles.

This replica has landed in our boneyard due to a few issues; the most concerning is when inspecting the battery connector, it appears to have melted/burned in some sort of fashion so this could mean a few things - most likely is that the electronics/mosfet is faulty and was drawing too much power. Alongside this issue, the magazine, charger and battery are also missing so these would also have to be sourced. We believe this replica would better suit being a prop for cosplay or something similar given the mentioned issues.

This replica has found its way into our boneyard due to potential mosfet issues - during testing, we didn't find anything obvious that pointed towards a faulty mosfet though performance was slightly sluggish per trigger pull in regards to the replica cycling. Firing through our chronograph, we were seeing 205 FPS on .2 BBs so you could happily skirmish this AEP indoors without problem. Take note that this replica is missing its battery and charger so both would require a replacement to be sourced in order to use the platform.

This replica has found its way into our boneyard due to supposed cycling issues - on the contrary, we found that the replica cycles just find albeit doing so slightly sluggish. Firing through our chronograph, we did see 235 FPS on .2 BBs which is higher than normal but this is perfect for an AEP platform. Other than this, the replica is missing its battery and charger so both would have to have replacements sourced in order to skirmish it.