Airsoft Outer Barrel and Parts

A Steel constructed Gas Block for LCT branded AKM models, ideal as a replacement to a damaged part.

If you want your SigAir MPX even shorter than it comes from the factory this kit will do it! The Laylax Outer Barrel Base & Battery Block Set for SigAir MPX includes a super short outer barrel base and the Laylax Battery Block, allowing you to install a barrel extension or a suppressor which runs beneath the handguard for the integrally suppressed look. 

This part replaces your original outer barrel with an aluminium barrel base measuring 8.5cm overall length, with 4.5cm protruding ahead of the receiver when installed. Also included is the Laylax battery block, designed to keep your battery contained within the handguard when your barrel is pointed down. The battery block won't fit over a suppressor but if you decide to fit a barrel extension it should fit any with a diameter of less than 19mm. 

If you are building an M4 from the ground up or you want a new look for your M4/AR15 platform this 5KU Aluminium outer barrel is worth a look! This barrel is 14.5 inches in length, just like the standard carbine length M4 barrel but has a heavier profile towards the tip to simulate real-world heavy barrels which allow for more sustained fire before accuracy takes a dive due to heat build-up.

The barrel is constructed from two parts, the barrel itself and the barrel base which are secured together using a pair of steel grub screws. At the tip we have the Airsoft standard 14mm CCW male threading, leaving you with a wealth of options for what muzzle device you choose to mount. The profile of the barrel matches real M4 barrels throughout its length, making this a great choice as a replacement for those who don't like seeing what is clearly a skinny Airsoft barrel through the ports on their handguard. This barrel is designed for M4/AR15 AEGs and should fit the vast majority of them.

A replacement Gas Block for LCT branded LCK47 models, which is made to the original specification from Steel as a replacement part.

A two inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

An alloy constructed thread adapter for Army Armament branded Airsoft pistols with a 12mm CCW female threaded outer barrel. If own an Army Armament pistol with a female thread on the outer barrel and want to install a suppressor, tracer unit or other muzzle device, then this is the adapter you require. It comes supplied with a knurled thread protector to prevent damage to the threads (and look awesome) when a muzzle device is not installed.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

An Aluminium constructed outer barrel for M4/M15/M16 Airsoft Electric powered replicas which features a 14mm CCW thread and an extension piece to rapidly adapt between a CQB and Carbine length barrel.

An adaptor which converts the 18mm thread on the Airsoft Scorpion Evo to a 14mm Counter Clockwise (CCW) Thread

Take your sniper to the next level and reduce those all-important decibels with a silencer adaptor. This aluminium constructed thread adaptor allows you install muzzle devices such as suppressors and tracer units. Simply remove the barrel cap and replace it with this adaptor for a seamless transition to the muzzle device of your choice.

The adaptor provides a 14mm CCW thread to customise your replica, and is compatible with the MB01, MB05 and MB06 spring-powered Airsoft sniper rifles

The A01 Silencer Adapter is intended to be used on pistols with an 11mm clockwise female threaded outer barrel, such as WE pistols. When installed, the adapter provides the common 14mm CCW male thread, allowing the majority of muzzle devices to be added. The adapter is constructed from stainless steel, and is available in black, gold or silver finishes.

The A01 Silencer Adapter is intended to be used on pistols with an 11mm clockwise female threaded outer barrel, such as WE pistols. When installed, the adapter provides the common 14mm CCW male thread, allowing the majority of muzzle devices to be added. The adapter is constructed from stainless steel, and is available in black, gold or silver finishes.

The A01 Silencer Adapter is intended to be used on pistols with an 11mm clockwise female threaded outer barrel, such as WE pistols. When installed, the adapter provides the common 14mm CCW male thread, allowing the majority of muzzle devices to be added. The adapter is constructed from stainless steel, and is available in black, gold or silver finishes.

Take your sniper to the next level and reduce those all-important decibels with a silencer adaptor. This aluminium constructed thread adaptor allows you to install muzzle devices such as suppressors and tracer units. Simply remove the barrel cap and replace it with this adaptor for a seamless transition to the muzzle device of your choice.

The adaptor provides a 14mm CCW thread to customise your replica, and is compatible with the MB-03 spring-powered Airsoft sniper rifles.

A replacement outer barrel for M4/15/16 variants that is constructed entirely from a strong and durable Alloy.

This Thread Adapter is designed for VORSK Pistols that have an 12mm Female Thread (the Thread is recessed inside the Outer Barrel). Whether you have lost the original supplied with your Pistol, or you want to install a Supressor/Tracer Unit to your Pistol, this adapter is an absolute must for those who want a standard thread (14mm CCW Male) on their sidearm.

This Thread Adapter is designed for VORSK Pistols that have an 12mm Female Thread (the Thread is recessed inside the Outer Barrel). Whether you have lost the original supplied with your Pistol, or you want to install a Supressor/Tracer Unit to your Pistol, this adapter is an absolute must for those who want a standard thread (14mm CCW Male) on their sidearm.

A 76.2mm long barrel extension for any AEG with a 14mm CCW thread on its outer barrel.

A Two-Piece Outer Barrel Assembly for AR/M4/M16 Platform Airsoft Replicas, constructed to a tough standard using Aluminium. The Two Piece design allows you run the barrel in a short configuration, ending just after the A-Frame Sight Post, or in it's longest configuration with the extension piece installed. Both sections of the Outer Barrel feature a 14mm CCW Thread for the installation of Suppressors, Tracer Units and other Muzzle Devices.

If you have ever felt like you messed up buying a rifle with a 14mm clockwise threaded barrel, weep no more! This 14mm CW to 14mm CCW thread adapter attaches to any 14mm CW male thread and provides a 14mm CCW male thread for the addition of more common CCW threaded accessories!

An Aluminium constructed outer barrel for M4/M16 based Airsoft Electric replicas. It has a 14mm CCW thread at the end for the addition of muzzle devices and is a relatively easy part to install.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.