Airsoft Silencers, Suppressors & Tracer Units

If you are after a lightweight, simple suppressor to add to the look of your AEG, rather than dominating it, the Dummy sound suppressor from CYMA may be just what you need!

If you want that "I just triple tapped Bin Laden in the face" look, you probably already have an MP7, but you will be needing the suppressor to match. Introducing the H&K licensed suppressor for the MP7 by Umarex, a Quick detach suppressor with a foam filling for added suppression effect.

An Airsoft mock suppressor, designed to replace an Airsoft gun's flash hider, and featuring an imitation of the US SOCOM special operations forces weapon suppressor. 

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. the new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. the new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. The new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

A foam filled Airsoft mock suppressor, designed to be attached to Airsoft 14mm threaded outer barrels, and is specially with adaptors allowing the suppressor to fit both Clockwise (CW) and Counter Clockwise (CCW) threads. 

If you need an ultra-modern QD suppressor and flash hider for your long gun, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit should suit your needs! This is the taper mount version, pre-fitted with an extended collar which allows for quick attachment and removal via the included steel tri-prong flash hider. The flash hider mounts to 14mm CCW male barrel threads, making it suitable for almost every Airsoft AEG or GBBR.

The Resistance 22M is available in either Tracer or Non-Tracer versions, both of which use the same flawlessly machined 6061 aluminium alloy body. Licenced Griffin Armament® trademarks are present on the suppressor body and are immaculately laser engraved, only differing from the real thing slightly due to the terms of PTS's licence agreement.

The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. A USB Type-C cable is also included in the set, just in case you don't have loads lying around already! As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.

Other than its easy and quick removal, the advantage of the Taper Mount Kit is its ability to be converted into a Blast Shield using the included threaded ring. Simply unscrew the front of the suppressor body and replace it with the ring and you've got yourself a Griffin Taper Mount Minimalist Blast Shield! If you're looking for a slick modular muzzle device to finish off your rifle build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit is a fine choice!

If you want to furnish your primary with stealthy styling, the Umarex ELITE FORCE C4 Mock Suppressor; 14mm CCW will do the trick! Constructed from aluminium with a knurled collar for easy attachment and removal, this mock suppressor is hollow on the inside, making it ideal for running an extended inner barrel through to enhance accuracy and squeeze a bit more air efficiency from your primary.

The C4 Suppressor mounts to common 14mm CCW male barrel threads, making it ready to mount on almost any Airsoft rifle or SMG. Being made from aluminium keeps the C4 lightweight, ensuring you don't end up with a sleek-looking primary which handles like a pig. Tipping the scales at only 160 grams, this suppressor should also be suitable for mounting on GBB pistols, minimising the usual sacrifice in gas efficiency, but make sure you have a 14mm CCW male thread on your pistol before purchasing!

If you have dinged up your integral suppressor for your CM.041SD, fear not! You can have your sneaky beaky SMG looking great once again with this replacement original part from CYMA.

If you want to give your primary a sneaky look, a suppressor is the way to go! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of Specna's silencer is the "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!

A mock Airsoft suppressor designed specifically for the MP9 GBB submachine gun, featuring genuine Brugger & Thomet AG licensed trademarks.

If you're looking for a stylish muzzle device which can mount to multiple platforms, the PTS Syndicate Griffin Armament® QD Blast Shield Gen 2 should suit! This Blast Shield is made from CNC machined 6061 aluminium and is licenced by Griffin Armament®, meaning flawless dimensional accuracy and full compatibility with PTS's range of Griffin Armament M4SD muzzle devices.

One of the neat tricks the QD Blast Shield has up its sleeve is the ability to mount to most A2 birdcage style flash hiders, meaning if you don't have a PTS Griffin Armament flash hider there is a high likelihood this will fit your original flash hider. Please note, as tolerances can differ between manufacturers, we cannot guarantee compatibility with all A2 birdcage flash hiders. 

The QD Blast Shield mounts via its Gate-LOK™ QD mechanism, requiring the circular leaf spring at the base of the suppressor to be pulled away from the collar and the QD mech lifted up and out of the device, allowing it to slip over your flash hider and be locked into place. We suggest proceeding with care when installing this device on non-PTS Griffin muzzle devices as you may damage its flawless finish! 

If you fancy the sneaky look for your Airsoft rifle, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor is what you need! A flawlessly machined and officially licenced replica of the real steel Griffin GP5™ (GeneralPurpose Mod.5), this suppressor mounts directly to 14mm CCW male barrel threads, saving you a fair bit of weight when compared to QD suppressors to keep the front end of your primary lightweight and easy to point.

The body of the GP5™ is flawlessly machined and dead on accurate to the real thing, even down to the discretely engravedlicenced Griffin Armament trademarks. The only deviation is the inclusion of the PTS logo and "For Airsoft Use Only", though these markings are very discrete and hard to find if you aren't looking for them!

The GP5™ is available in Non-Tracer and Tracer forms, with the latter including a pre-installed tracer module instead of the mock baffles inside. The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. The charging cable is NOT included so make sure you've got one ready. As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.

If you're into the finer things in life and need a suppressor to top off your build, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor will do the trick. Providing the elite, realistic look a professional build needs with far less added weight than most comparable suppressors, the GP5™ looks fantastic and won't slow you down!

5KU brings us an imitation of the Russian SF 9x19 flash suppressor made high quality CNC aluminium, known as the KP-9. With a large, rounded and aggressive aesthetic, the very front of the suppressor sports cut grooves and port holes to conceal muzzle flash in the real-world equivalent.

Most often seen on SMGs such as AK47s, KP9s, MP5s and Scorpions, this Airsoft replica suppressor utilises a 14mm CCW female thread so it can be fitted to any thread or adaptor that sports the corresponding male 14mm thread. With a padded foam interior that muffles your shots, this suppressor gives you what you need to sneak around and get those stealth kills in style!

If you want a pistol that can reach out and touch the enemy at long range, an extended inner barrel is just the thing. The WE PX001 Silencer And Extended Barrel Kit; 11mm CW is designed for the WE PX001 but is also compatible with most WE GBB pistols if you use your original HOP-up unit assembly.

The kit includes an 11mm CW threaded suppressor for 11mm CW female threaded barrels (WE, Armourer Works, CowCow and some others), a 6.03mm tightbore inner barrel measuring 189mm in length and HOP-up unit for the PX001 platform with a pre-installed bucking.

Please be aware, it is possible that the inner barrel will protrude through the tip of the suppressor when installed on certain compact pistols so make sure you measure up before ordering. We recommend adding the length of your existing inner barrel to the length of the included suppressor (138mm); if the length is equal to or greater than 189mm, the inner barrel will fit.

If you're seeking an ultra-modern suppressor to top off your build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is a fine choice. This suppressor is modelled after the real steel SCI-6 and includes all the flawless details and crisp machining we would expect from an Airsoft Artisan suppressor made from CNC aluminium and steel. 

The suppressor body is made from CNC aluminium and the QD collar is made from steel, giving you strength where needed for a lifetime of reliable mounting and removing. The included 3-prong flash hider is also made from steel and is a beautiful piece all by itself; a squat and menacing design well suited to modern rifle builds. If a suppressor with high-end styling is all you need to finish off your dream build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is the way to go!