- Full metal construction - Mostly steel
- 6.01mm Tightbore inner barrel
- MOSFET Pre-installed - Improved trigger response & RoF
If you have been eyeing up an ARCTURUS AK-12 but haven't yet taken the plunge, the AK-12 with AK-19 stock will make you glad you waited! This updated version of the AK-12 is styled after the latest AK-12 variants offered to civilian shooters, with improved ergonomics thanks to the new AK-19 stock and enhanced pistol grip. As with the previous ARCTURUS AK-12, this AEG is made almost entirely from steel, with a gorgeous stamped steel receiver and top cover and only the muzzle brake being alloy. On the outside, the AK-12 is slicker than ever before!
When it comes to internals, this variant of the AK-12 is equipped with an in-line MOSFET to improve trigger response and rate of fire and extend the life of the microswitch trigger by improving electrical efficiency. The gearbox is pre-upgraded with components focused on reducing friction, including a ball bearing quick change spring guide, ball bearing piston head, steel gears mounted on 8mm bushings and a ball bearing pinion gear to allow the high torque motor to spin more freely at high speeds. The inner barrel is a 6.01mm tightbore constructed from steel for maximum rigidity, and the ARCTURUS AK rotary HOP-up unit is also present, giving you the most modern innovation in AK HOP-ups with easier-to-apply adjustments and superb air seal.
Whether you are fixed on an AK-12 or you are checking out the AK platform options, the ARCTURUS AK-12 with AK-19 stock would make a fantastic, up-to-date primary for any modern Russian military or PMC loadout!
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
ARCTURUS is known for its fantastic range of modernised Airsoft AK AEG rifles, offering the latest variants of the venerable platform in full steel form, packed with realistic features and with a bombproof internal feature set.
This time, ARCTURUS brings us the latest version of the AK-12, featuring the cutting-edge AK-19 side folding adjustable stock and the latest AK-12 pistol grip. All of the best aspects of the original ARCTURUS AK-12 remain; including its authentic and hefty steel construction, low friction gearbox with in-line MOSFET to enhance performance and 6.01mm steel tightbore inner barrel coupled with a new rotary HOP-up design, promising superb accuracy and constancy at long range.
Starting at the tip of the 16.3-inch steel outer barrel we have an AK-12 muzzle brake, which looks mean AF with its aggressive spiked front end, designed to help stabilise the rifle when it is pressed against a hinge or lock in a breaching scenario. You will want to keep this muzzle device on for a real world accurate AK-12, but if you prefer to go rogue and dress the latest AK up, you can thanks to the 14mm CCW male threading concealed beneath the muzzle device and its mounting apparatus.
Removing the muzzle brake is a two-part affair, owing to its QD functionality. The muzzle device itself can be removed from its mount by holding the small detent pin found on the top down, and turning the muzzle device in either direction. With the muzzle device removed you will see a thread protector with a flat cut on either side. Unscrewing this gives us access to the 14mm CCW male threads so you can get sneaky with a suppressor or streaky with a tracer unit, should the mission require it.
The muzzle device is followed by its mounting apparatus which also includes a dummy bayonet lug at the bottom. Travelling a short distance rearwards along the steel outer barrel brings us to the front sight/gas block of the AK-12, which is constructed from steel with a dummy gas adjuster at the front, and the front sight post at the top, protected on either side with protective wings. This means if you drop this hefty beast it may get scratched up, but the front sight should remain usable and intact in all but the worst case scenario.
The gas block connects to the gas tube, which is authentically stamped from sheet steel just like the real thing. It is lovely to see this kind of authenticity, as most manufacturers settle for cast alloy gas tubes on their AK replicas, and realism nuts like us will notice this instantly! Below the gas tube we have a single sling point which is mounted around the barrel, and can swivel to either side to reduce the chances of the sling getting tangled and allow both left and right-handed shooters to sling this AK easily.
Following the gas tube back leads us to the high density polymer handguards of the AK-12, which have integral 20mm Picatinny rails at the 6 and 12 o'clock positions and removable aluminium side rails at the 3 and 9 o'clock positions. Though this rifle may be Russian in origin, it can be kitted out like a MK18, with plenty of room for tactical flashlights, PEQ lasers and anything else you can think of mounting. Unlike previous AK rifles, the handguards of the AK-12 are free floated which prevents force applied to the handguard from being transferred to the barrel which would negatively affect accuracy.
Moving rearwards once more we come to the receiver, which follows the AK design format in a round about way but has some notable improvements. The fire selector is located on the right side, but unlike a normal AK, can be used without removing your hand from the pistol grip. This is achieved by adding a folded steel extension to the selector in classic Russian utilitarian style. This allows you to select your fire mode with a simple sweep downward of the trigger finger, a massive improvement over legacy AK rifles!
The fire selector provides 4 positions, sneaking an extra one in between full auto and semi-auto. The top position is the safe mode, which disables the trigger and seals the gap between the receiver itself and the top cover, functioning as a dust cover. The next position is full auto, followed by a second full auto position, with semi-auto being the lowermost position. Each fire mode is indicated with authentic Cyrillic markings which are stamped into the receiver, matching the real AK-12 perfectly. The two-round burst mode is not functional on this version of the AK-12 and if this is a dealbreaker for you, we suggest checking out the Perun MOSFET enhanced AK-12.
The receiver top cover design is another area the AK-12 improves upon the original AK. The top cover is constructed from steel, and has a 20mm Picatinny rail riveted to the upper surface to allow for optical sights to be mounted using far more user-friendly western mounting solutions. Unlike other AKs with railed top covers this top cover is designed specifically for retaining zero effectively, and as such is mounted differently to other AKs. The battery compartment of the AK-12 is beneath the top cover and is ideally sized to fit AK long stick batteries, but can also house slimmer 7.4V 1300 mAh stick batteries designed for M4/AR-15 buffer tubes.
To access the battery compartment you will need to turn the top cover retention latch by 90 degrees to the vertical position, which is located on the right side of the trunnion block (between the handguards and receiver). With the latch positioned vertically, you can pull it outwards where it will be retained in the trunnion block. With the latch held clear of the pin hole, the receiver top cover can be pulled back and lifted away to reveal the Deans battery connector within.
When reinstalling the top cover it is important that you ensure no wires get trapped, and that you align the pin hole in the front of the top cover with the holes in the trunnion block before pushing the retention latch back through. The top cover needs to be slid onto the receiver from the rear to mate with the two hooks at the rear of the lower receiver to hold it securely in place.
The AK-12 pistol grip is a significant ergonomic improvement over the legacy AK grip, and has comfortable finger grooves with bevelled relief cuts for added comfort. The grip is set at a more vertical angle than the older AK grip to provide a more comfortable wrist position when shooting with the stock collapsed fully. AKs are not known for their comfort or ergonomics, so it is nice to see the AK-12 give us a little more home comfort to suit our pampered western hands!
Installed on this version of the AK-12, we are treated to the AK-19 pattern of stock, a modern Russian design which follows the format of SCAR, ACR and other modern stocks. Like the AK-74M stock, the AK-19 stock offers side folding functionality, allowing the AK-12 to fit into smaller gun bags and be transported with ease. At the base of the stock on each side, we are treated to a QD sling socket insert constructed from steel, allowing for a slick modern QD sling setup to be mounted using QD sling swivels if you so choose.
The stock also offers length of pull adjustment via the lever at the toe of the stock, giving you 7 positions to choose from to compensate for bulky body armour vests or different body types. The butt plate is constructed from grippy rubber with an aggressively serrated surface, guaranteeing the stock won't slip off your shoulder during wet weather operations.
The stock folds similarly to a legacy AK-74 platform, making use of a button on the left side of the receiver, just above the pistol grip. Pressing this button will defeat the locking mechanism and allow the stock to be folded to the side. To deploy the stock again, simply pull downwards on the steel tab protruding from the folding mech at the rear and the stock can be folded back into position. This stock is a lot easier to handle than an AK-74 stock, requiring only the folding mechanism to keep things in place instead of the protruding hook used on the AK-74.
On the inside, this AK-12 is equipped with a high torque motor to deliver the power needed for a swift trigger response and allow for stronger springs to be installed, keeping within the design parameters of the AEG. Like other ARCTURUS AEGs, the gearbox is filled with low-friction parts to increase the lifespan and efficiency of the system. The AK-12 also uses ARCTURUS's rotary AK HOP-up unit which shows incredible potential as the newest HOP-up unit design for the AK platform, coupled with a 6.01mm tightbore inner barrel constructed from hardened steel for enhanced accuracy through its high quality internal finish and extra rigidity.
Whether you are a fan of Russian rifles and need this one to complete the collection or you are simply looking for a change of pace and a new experience, the ARCTURUS AK-12 with AK-19 stock will make a fine skirmish primary and is a flawless replica of the real deal. It isn't often you get a full steel AK build with this level of realism and loads of pre-upgraded parts practically thrown in!
Features
- Full metal construction
- 6.01mm Steel tightbore inner barrel
- Rotary HOP-up unit - Great design, super easy to adjust
- Version 3 gearbox - Compatible with Gate TITAN/ASTER ETU
- Almost entirely steel construction - Hefty and very realistic
- MOSFET pre-installed - Improves rate of fire and trigger response
- 20mm Picatinny railed handguard - Two removable side rails, full-length top and bottom rail
- 20mm Picatinny railed receiver top cover - Ready for red dot sights and scopes!
- 14mm CCW Male threaded outer barrel - Tracer/suppressor ready
- Ambidextrous magazine release - Easy mag changes for left and right-handed users
- Extended fire selector lever - Change fire modes with the trigger finger!
- Mean looking AK-12 QD muzzle brake - Push the detent pin in, turn slightly and off it comes!
- Refined pistol grip design - More comfortable than the earlier AK-12 grip, built-in enlarged trigger guard
- Side folding retractable stock - Known as the "AK-19" stock, rubber butt plate, QD sling socket and sling loop
- Side folding stock hinge - Fold the stock to the side for easier transportation and clearing corners
- 4 Position selector switch - Lowermost position is semi-auto, both middle positions are full-auto
- High torque neodymium magnet motor - Super fast trigger response and ROF
- Detailed mock rivets and realistic stamped receiver markings - Flawlessly realistic
- Compatible with AK AEG magazines - 5.45 style mags ideal, but 7.62/5.56 should also work
- Supplied with 2 magazines - 500rnd High-cap and 30/130 Adjustable mid-cap
- Compatible with standard AK-47/74 AEG magazines
- Ideal AK-12 style spare magazines are available here
Package Includes
- ARCTURUS AK-12 AEG Rifle w/AK-19 Stock; MOSFET Enhanced Version
- 30/130rnd Adjustable capacity magazine
- 500rnd High capacity magazine
- Deans to mini-Tamiya adapter
- User manual
- Cleaning/unjamming rod
- ARCTURUS Stickers
Specification
General
|
Assault Rifle
|
---|---|
|
Yes
|
|
Yes,
No,
|
|
Approx. 330fps ± 10%, using 0.20g BB
|
|
Yes
|
|
Yes
|
|
|
|
Regular Player
|
Weight and Dimension
|
Approx. 3.3kg
|
---|---|
|
70cm
|
|
95cm
|
Construction
|
Black
|
---|---|
|
Steel receiver, top cover, outer barrel, front sight/gas block, gas tube, trunnion block, stock folding mech, trigger guard/mag release, mock bolt carrier, trim parts. Alu flash hider.
|
|
Polymer
Alloy
Stamped Steel
Aluminium
Steel
|
|
Polymer
Alloy
Aluminium
Steel
|
Weapon Specific
|
Electric
|
---|---|
|
None
|
|
AK Platform, Long Gun, AK Variant , Assault Rifle, AK-12,
|
|
AK Platform, Long Gun Magazine, Assault Rifle,
|
|
Safe
Semi Automatic
Full Automatic
|
|
Trigger Lock
|
|
Right Handed
|
|
Standard
|
|
1:1
|
|
0.25g
|
Hop-Up
|
Yes
|
---|---|
|
Rotary
|
|
Behind mock bolt carrier, accessible when the charging handle is pulled and held to the rear.
|
Furniture
|
|
---|---|
|
20mm RIS / RAS , 20mm Railed Receiver,
|
|
Sliding , Multi-Position , Folding ,
|
|
7 Position
|
|
Iron Sights , Aperture Iron Sight,
|
|
Stock , QD , Loop , Barrel,
|
Barrel
Outer Barrel Length (in)
|
16.3''
|
---|---|
|
Male
|
|
CCW (Counter Clockwise)
|
|
14mm
|
|
6.01mm
|
|
425mm
|
Magazine Specific
|
High Capacity, Wheel Wound, AEG,
|
---|---|
|
Approx. 500 Rounds
|
|
Fill Window
|
|
Top
|
Electric Gun Specific Information
Gearbox
|
V3 Gearbox
|
---|---|
|
Top Wired
|
|
Yes
|
|
Yes
|
|
No
|
Motor
|
High Torque
|
---|
Battery Specific
|
Deans ,
Deans To Mini Tamiya Adaptor,
|
---|
Compatible Battery
|
Li-Po
|
---|---|
|
Stick
|
|
7.4v
|
Product Testing Data
|
330 FPS +/- 10%
|
---|---|
|
0.2g ASG BLASTER
|
|
05/10/2023
|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |
Need ideas for something extra?
- Tolerance: 5.95mm +/- 0.01mm
- Biodegradable BBs
- 0.25g Weight - 2200 or 6000rnd options
If you are looking for biodegradable BBs for use in both CQB skirmishes and out in the glorious woods, NUPROL have just the thing! The RZR 0.25g Precision BIO BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are constructed from a biodegradable polymer, meaning they will be allowed on even the strictest Airsoft sites and no need to worry about cleaning up after shooting!
- 14mm CCW or 14mm CW threads
- "Brrrrt" markings - 40mm Diameter version
- Foam filled for slight sound dampening
If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This suppressor is the 40mm diameter version, available in either 100mm or 150mm lengths; ideal for rifle and SMG builds.
This version of Specna's silencer is the 40mm "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text with a wider diameter than the standard. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!
- Bottles or Bags
- 0.25g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.25g BBs which are designed to work in any Airsoft gun, performing best in Airsoft guns which fire between 280fps - 370fps, and are the go-to weight for any Airsoft skirmisher looking for an the perfect all around weight for a standard AEG. Whether you're new to Airsoft, or a regular skirmisher, this weight of BB will most likely be your go-to BB weight, and is the most commonly used by Airsoft players.
- 0.25g BIO BBs
- Bottles or Bags
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are BIO 0.25g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.
This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- Foam Filled
- Spring Core
- 14mm CCW / CW
An Alloy constructed Suppressor with Foam Baffles and a Spring Core for support. The end caps of the Suppressor can be unscrewed to access the internals. Designed for Airsoft replicas with a 14mm CCW or CW Thread, this Muzzle Device is the perfect accessory to conceal an Inner Barrel extension, or just to add a personal touch to your Airsoft Gun.
This suppressor has a clever feature which is that it has a 14mm CCW thread on one end and a 14mm CW thread on the other, as such it is compatible with both thread types.
- Aluminium construction
- Mounts to 14mm CCW male threads
- Internal foam baffles to reduce muzzle report
If you are looking for a sneaky aesthetic and reduced muzzle report, the Novritsch Rifle Suppressor will give you just that! This suppressor is constructed from aluminium and has internal baffles made from acoustic foam which will reduce the muzzle report of your primary and make you harder to locate.
The Novritsch Rifle Suppressor is compatible with any Airsoft gun which uses 14mm CCW male barrel threading and has an aggressive ported front end, providing some visual interest to the design which marks it out as something a bit different from the usual, boring tube suppressors.
On the inside, Novritsch has gone above and beyond, using 2 different sized baffles to muffle the muzzle report, widening at the end to prevent BBs from shattering inside and ruining that perfect shot. The front cap can also be removed, so if you want to change the filling to your own secret suppression formula, you are free to do so. Whether you are taking your sniper rifle build in a sneaky direction or you are creating an assault rifle with an emphasis on stealth, the Novritsch Rifle Suppressor is the perfect finishing touch!
Like this Airsoft Gun? Check out these awesome Products!
- £20 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Full metal construction
- Matt black with gold outer barrel
- Combat styled Hi-capa long boi
If your friends are using the R604, this pistol is the key to making them feel inadequate! Introducing the R608 Hi-capa Combat XL from Army Armament, a Hi-capa based pistol with a combat leaning, now in a new, lengthened flavour! The pistol combines the well liked aggressively stippled grips of the R604 and JW3 GBB pistols with a shorter dust cover and 5.5-inch outer barrel with extended slide; akin to the original "Silverballer" of the well-known man of hits video game but in a slightly more practical length!
- Full metal construction
- Functional De-cocking lever
- 20mm frame rail and 12mm female threaded barrel
If you are eyeing up a new sidearm but aren't up for the more common Hi-capa and EU series perhaps a classic Italian designed pistol would suit your tastes? Introducing the Raven R9 GBB, Raven's entry into the B9 series of Airsoft pistols. The real B9 was most famously issued to the US Army in the 1980s, replacing the venerable M1911.
- 1:1 Scale Replica
- Supreme build quality
- Beautiful licensed H&K trademarks
If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!
- Textured Grip
- Decocking Lever
- Gas Blowback Pistol
A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more.
- Quick Change Spring
- Electric Blowback AEG
- Unique KeyMod Handguard
Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the AEG a more exiting firing experience with a bit of recoil for enhanced realism.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
If you are looking for a skirmish-oriented primary which gives you all you need to cut through the hoards, the Wildhog has your name on it! The G&G CM16 Wildhog is the G&G Combat Machine reinvented with the superb G&G G2 gearbox and a programmable ETU which allows for burst mode, all housed in G&Gs rock solid polymer receiver with an updated shape and design to give it a slick, modern style. If you seek something robust with above-average performance and some slick advanced features, the Wildhog is the one!
- 6.03mm Tightbore inner barrel
- High density polymer construction
- Spenca's featherweight AR-9 offering
If your primary weighs a ton and you are looking for a lightweight alternative, the Specna Arms SA-FX01 is the ideal choice. This AR-9 style AEG is constructed from Spenca's fantastic high density polymer and is rocking the same internals as the established FLEX™ series, allowing it to tip the scales at a minuscule 1.8kg without compromising on in game performance or aesthetics.
The SA-FX01 is equipped with an M-LOK handguard featuring QD sling sockets straight out of the box, giving you a modern front end with wide accessory compatibility and a slick, cutting-edge look. The receiver is patterned after real steel "billet" AR receivers, blending perfectly with the M-LOK handguard while offering plenty of space to easily mount a scope or red dot sight for better effect on target. On the inside, things are equally impressive. A 6.03mm tightbore inner barrel provides the accuracy needed to send the enemy back to respawn, and a modern rotary HOP-up unit allows you to extend your range and tune for different ammo weights.
Whether you are fresh to Airsoft skirmishing or a veteran looking for a lightweight primary weapon option for enhanced mobility, the SA-FX01 brings full-fat AEG performance to the table with only slightly more mass than a beachball!
- Integrated optical sight
- Front 20mm RIS rail
- Bullpup configuration
Bullpup rifles, you either love 'em or you hate 'em. But assuming you've found your way to this page, we're guessing you're on team rear mag. This variant features a shorter barrel so the compact nature of the AUG is augmented further, giving you a long hidden inner barrel with a vastly reduced footprint when held against your person.
With an integrated scope and front para 20mm rail with pistol grip included, this variety of AUG is great for both CQB and longer range outdoor skirmishing alike, giving you the best of both worlds. With a sturdy and compact design, bullpup fans, you may have just found your new favourite primary.
- M-LOK Compatible
- Dynamic AK Platform
- Multiple Stock Variants
A 6mm BB Airsoft Electric Gun, based on the AK-102, and given a comprehensive overhaul, creating an Operator Platform that is incredibly dynamic.
- Tactical Appearance
- Alloy M-LOK Handguard
- Hi-tech Internal Enhancements
The Double Eagle M90 range presents an innovative & unique range of AR-15 / M4 Airsoft replicas to the market, offering an inimitable exterior build quality with advanced next-gen internals and adorned with the latest in modern firearm furniture, so get your NODS on, it's about to get operator AF up in here.
- Full Auto Version
- Gas Blowback Pistol
- Racoon City Police Ver
Yes it shoots full auto and yes it can be yours! This is the lavish and exuberant variant of the ever popular Biohazard series of Airsoft Pistols, featuring 'Racoon City Police' trademarks.
- Thread adaptor and rail
- Extended base plate
- Light enhancing sights
Army Armament have taken Airsoft 1911's to the next level, with a sweet array of advanced features.
The extended magazine and light enhancing ironsights as well as the textured grip and beavertail safety come together for a true operator's sidearm. With satisfying trigger response and recoil this 1911 is a modern twist on an iconic pistol.
- Square Ironsights
- CO2 Compatible
- Textured Grip
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a faithful replica of the real world pistol it represents. The pistol features a Semi-Automatic Gas Blowback system, meaning that a Single Round is Discharged for every Trigger Pull and also Simulates Recoil for a more realistic experience.
This is the perfect sidearm for any Airsoft player, allowing you to quickly and effectively protect yourself from any threat should your main weapon go down or the enemy engage you in a CQB Environment.
- Full metal construction
- Modern AK support weapon
- Includes steel folding bipod
If you're an AK fan and you are looking for something bigger, the RPK is what you need! The CM.052A RPK-74M is a faithful replica of the latest variant of the RPK light support weapon, a lengthened and strengthened AK47 based design intended to provide a high volume of fire and increased accuracy at squad level. The CM.052A sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and modern polymer furniture matching that which is currently issued to Russian armed forces. The RPK-74M takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45 round style high cap magazine which holds a whopping 800 BBs!
- Revolver Grenade Launcher
- Can fire 6x MOSCARTs in rapid succession
- The ultimate Airsoft firepower!
If you need to bring some serious firepower to your next skirmish there are few platforms that can rival a 6-shot revolver grenade launcher! The NUPROL Matrix MGL can carry up to 6 40mm MOSCART grenade shells and unleash their payloads in under a second thanks to its revolver-like design, based on the real steel Milkor M32 MGL.
The Matrix is similar to other revolver grenade launchers we have seen in the past but with a few notable improvements. The outer barrel of the Matrix is constructed from aluminium and has a threaded tip, meaning more realistic handling, though we don't think there are any suppressors for this monstrously large thread!
The pistol grip of the original MGL has been replaced with a VFC QRS pistol grip, boasting enhanced ergonomics and crackle texture on each side for improved grip. The stock still mounts to the good old M4/AR-15 buffer tube, but the pre-installed stock on the Matrix is the VFC QRS stock, offering a snag-reducing A-frame style design with QD sling sockets on either side.
Whether you have vehicles to deal with in an upcoming Milsim skirmish or you simply want to be the badest bunker buster on the field, the NUPROL Matrix MGL will equip you to clear the enemy out of any emplacement like a bad fart clears a room!
- Full metal construction
- 6.01mm Steel tightbore inner barrel
- An AK dressed for 21st century combat
If you are a fan of the AK platform but want something that can be equipped like a modern AR, the ARCTURUS AK74 TWS M-LOK Carbine should satisfy your needs! This AK is built like a tank, much like ARCTURUS's other AK offerings, but is equipped with a 20mm railed receiver cover and M-LOK/Picatinny hybrid handguard to allow a wide range of modern western accessories to be mounted seamlessly, with no need for adapters or improvised solutions.
On the inside, we are equally well equipped with the AK74 TWS. This AEG has a 6.01mm steel tightbore inner barrel, a modern rotary style AK HOP-up unit and some well chosen internal upgrades focussing on reducing friction and improving the efficiency of the system, and the result is impressive performance with little to go wrong. Those after an AK that can do everything an AR can, this one is for you!