- Full metal construction
- Licensed by Daniel Defense
- High speed motor pre-installed
Looking for a MK18 Airsoft AEG? Who isn't these days? As the rifle of choice for US Special Forces the MK18 has been immensely popular amongst both Milsim skirmishers due to its authenticity and more casual skirmishers who appreciate the MK18s practical feature set and aggressive looks. The CYMA CM.105 is a fully licenced replica from the CYMA Platinum series, sporting pre-upgraded internals with a high speed motor, tight bore inner barrel and ETU/MOSFET to regulate cycling and offer battery protection. The CM.105 differs from other Platinum AEGs with its official licencing from Daniel Defense through EMG in the US. This allows CYMA to add beautifully engraved authentic trademarks and a licenced DD MK18 rail system to their already impressive Platinum setup for what might be the ultimate AEG MK18!
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£6.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The CM.105 shows CYMA stepping up their game to create a rock solid full metal rifle, that is a fully licensed replica of the Daniel Defense MK18 MOD1. Stunningly machined to a precise standard, yet sturdy and weighty like the real thing, this rifle is not only about looks, it boasts impressive quality and high speed internals for those of you who like to run and gun and lay down some suppressive fire to keep the enemies heads down.
The CM.105 boasts quite the pedigree, with full metal construction, precise machining used throughout and an impressive internal feature set. Daniel Defense has licensed their patented trademarks in the form of laser engravings around many aspects of the rifle, including the handguard and receiver to really give it those faithful replica qualities. A stunning weapon that is practically a functional work of art.
Beginning at the tip of the 10-inch outer barrel we can find a birdcage type flash hider pre-installed on the barrel’s 14mm CCW male threading. For added security the flash hider also locks into place with a small grub screw located underneath the unit. The birdcage design also goes hand in hand in terms of looks with the handguard, jutting out two inches ahead for a compact front end, and is the appropriate flash hider design for the real Daniel Defense MK18 rifle. If the birdcage is a bit too pedestrian for your style, the 14mm CCW male threading at the tip of the outer barrel allows alternative flash hiders to be mounted, and also allows for use of suppressors or tracer units for the sneaky players out there.
Moving rearwards, we come to the handguard which is constructed from aluminium and is precisely machined using CNC technology. It doesn’t get more sturdy than this, with 10 inches of rail length available, you have plenty of space to add a myriad of accessories to suit your playstyle and loadout. The handguard has 20mm Picatinny rails at the 3/6/9 and 12 o'clock positions to add to the options available for customisation. The length of the rail allows you to position your accessories wherever you need them, be it a vertical or an angled fore grip, a tactical flashlight or a PEQ laser unit. Another benefit of the free floated rail design is that it prevents force from being applied to the barrel, allowing you to feel safe in the knowledge that your accuracy will be retained as much as possible.
The iron sights of the CM.105 Daniel Defense are removable alloy flip-up aperture sights which mount to the upper 20mm Picatinny rail. They have a very practical design in that they are quick to flip up in case of emergency, deploying with a simple push upward, but then lock with no chance of wobbling or falling, only being able to be released by pushing the button on the left side. These sights also offer a choice of quick adjust aperture size, with a large aperture being optimal for low light conditions and a small aperture excelling at precision aiming. The aperture itself can be minutely adjusted left and right via a wheel on the right side. The combination of these sights and the railed handguard come together to make one tidy, fully customisable package for a wide variety of playstyles or mission functionality.
In contrast with the matt black alloy body, the bolt catch and other controls are finished in a gun metal grey in colour, providing a nice touch of realism with the different colouration imitating different finishes applied to the real rifle's components. Unlike most bolt catches on airsoft rifles, this will actually function in that it will return the mock bolt plate to battery when pressed, adding to the realistic feel of the CM.105. While functionally, the bolt catch and ejection port action serve no in-game Airsoft purpose, it was included by the design team to try and make sure as little detail as possible was spared, adding to its superb realism. The ejection port can be found on the right side and can be opened by pulling back the charging handle located on the top rear most part of the body.
The CM.105 AEG features an alloy rotary HOP-up Unit which can be accessed by pulling back on the charging handle, which is located at the top rear of the receiver. This will open the dust cover and allow access to the rotary dial. The HOP-up is used to tune the amount of backspin applied to your BBs and provide a range improvement when tuned for the flattest trajectory possible with your chosen ammo weight. The rotary unit design is widely recognised as the best design for the M4/AR15 AEG platform due to the fine adjustment increments, and its ability to hold its setting under rapid fire.
The fire selector lever is located on the left side of the receiver, allowing for safety, semi and fully automatic settings at 90-degree instances. This means you can quickly switch between fire modes but be safe in the knowledge that you won't accidentally move the selector into a fire position when you don't intend to.
As we reach the pistol grip you will notice its textured design, but it feels even better than it looks. If you ever find yourself wanting an ergonomic and comfortable grip, this would be perfect for you and is a step above the grips provided on most Airsoft M4/AR15 AEGs. The crackle-textured surface of this grip will help keep it firmly in your grasp regardless of the weather and whether you choose to wear gloves when you skrimish or not.
At the base of the buffer tube is an ambidextrous sling plate sandwiched between the receiver and the castle nut. This plate is constructed from steel to provide the prerequisite strength for use with a single-point sling. This sling point is ideal for a single-point bungee sling but can also be used with a two-point sling with the addition of a rail-mounted front sling point. Following the sling plate we come to the stock of the CM.105, which is the usual M4/AR15 format of a 6 position buffer tube with an adjustable crane battery stock. This stock can be locked into any 1 of the 6 positions and can be adjusted to suit any body type or loadout.
The battery compartment of the CM.105 can be found inside the buffer tube and is accessible with the stock removed. This can be achieved by lifting the stock adjustment lever, found on the bottom of the stock, and pulling it out as far as it will go, then sliding the stock off the buffer tube to the rear. Inside you will find a Deans battery connector, offering a low resistance and high-efficiency alternative to the usual mini-Tamiya connector found on Airsoft AEGs. For the CM.105, we recommend a 7.4V 1450 mAh LiPo battery crane configuration, as it would fit perfectly in the crane stock.
Internally CYMA is really bringing the heat here in terms of specifications. The CM.015 boasts a high speed motor, and when combined with the Platinum ETU/MOSFET provides an absolutely staggering rate of fire, and an incredibly satisfying trigger response. This AEG, like other Platinum offerings from CYMA, is a proper demon on the skirmish field, and we sure wouldn't want to face down with one of these! The Platinum MOSFET offers battery protection, and active breaking, ensuring the gearbox completes a full cycle with every trigger pull. This prevents the gears from being left stored under stress between firing sessions, and will prolong the life of your gearbox considerably.
The CYMA Platinum gearbox has a quick change spring system built in, allowing for fast, effective customisation without needing to open the gearbox shell. This is great for those who like to tune their AEGs to suit the power levels of different skirmish sites, and is also great if you plan on upgrading the CM.105 gearbox even more as being able to remove the spring quickly makes the gearbox so much easier to work on.
So for those of you who are looking for a Special forces style MK18 MOD1 that is not only built to match real world Daniel Defense specifications but also features some top-notch internal components that are able to give even experienced players a run for their money, the CM.105 would be the perfect choice. If you're looking for a fantastic out-of-the-box Airsoft experience from a Milsim approved Airsoft rifle setup then you can't go wrong with the CM.105 Daniel Defense MK18.
Features
- Full metal construction
- 20mm Picatinny railed receiver
- 14mm CCW male barrel threading - Tracer/suppressor ready!
- Immaculate engraved Daniel Defense trademarks on the reciever
- Laser engraved trademarks on the handguard and upper
- Licensed by Daniel Defence through EMG
- CYMA Platinum gearbox - Pre upgraded throughout
- Rotary adjustable HOP-up unit
- Ergonomic pistol grip with large motor height adjustment screw
- High torque motor pre-installed - Terrifying rate of fire!
- "Troy" style flip up aperture iron sight set
- Licensed Daniel Defense MK18 MOD1 quad rail handguard
- 6 Position M4/AR15 buffer tube with Crane battery stock
- ETU/MOSFET pre-installed - Battery protection and active braking
- Mock gas block and tube for added realism
- Ambidextrous sling plate - Steel construction
- 10" outer barrel - Compact front end for CQB use
- Accepts any M4/AR15 AEG magazine
- Rubber butt plate for grip no matter the weather conditions
Package Includes
- CYMA CM.105 CM.105 Daniel Defence MK18 AEG 10-inch
- 120rnd Medium capacity magazine
- Allen key
Specification
General
|
Assault Rifle
|
---|---|
|
Yes
|
|
Yes,
No,
|
|
Yes
|
|
Yes
|
|
|
|
Starter, Regular Player,
|
Weight and Dimension
|
Approx. 2.613kg
|
---|---|
|
69cm
|
|
77cm
|
Construction
|
Black
|
---|---|
|
Aluminium handguard. Alloy outer barrel, receiver, buffer tube, flash hider and controls. Steel castle nut and sling plate. Polymer stock and pistol grip.
|
|
Polymer
Alloy
Aluminium
Steel
|
|
Polymer
Alloy
Aluminium
Steel
|
Weapon Specific
|
Electric
|
---|---|
|
None
|
|
AR Platform, M4 / AR15 / M16, Long Gun, Assault Rifle,
|
|
STANAG, Long Gun Magazine, Assault Rifle, M4 / AR Platform,
|
|
Safe
Semi Automatic
Full Automatic
|
|
Trigger Lock
|
|
Right Handed
|
|
Standard
|
|
1:1
|
|
0.25g
|
Hop-Up
|
Yes
|
---|---|
|
Rotary
|
|
Behind mock bolt carrier, accessible when the charging handle is pulled and the mock bolt is locked to the rear.
|
Furniture
|
|
---|---|
|
20mm RIS / RAS , 20mm Railed Receiver,
|
|
Sliding , M4 Crane Stock,
|
|
6 Position
|
|
Iron Sights , Aperture Iron Sight,
|
|
Buffer Plate , Stock , Loop ,
|
Barrel
Outer Barrel Length (in)
|
10''
|
---|---|
|
Male
|
|
CCW (Counter Clockwise)
|
|
14mm
|
|
6.03mm
|
|
260mm
|
Magazine Specific
|
Medium Capacity , AEG,
|
---|---|
|
Approx. 120 Rounds
|
|
Speed Loader
|
|
Top
|
Electric Gun Specific Information
Gearbox
|
V2 Gearbox
|
---|---|
|
Rear Wired
|
|
Yes
|
|
Yes
|
|
No
|
Motor
|
High Speed
|
---|
Battery Specific
|
Deans
|
---|
Suggested Battery
|
Li-Po
|
---|---|
|
Stick
|
|
7.4v
|
Product Testing Data
|
Tested using 0.2g BBs
|
---|---|
|
0.2g ASG BLASTER
|
|
23/06/2022
|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |
Need ideas for something extra?
- 3MOA Target Dot
- Special VE Warranty
- Super Clear Sight Picture
An ULTRA compact, Full Metal 20mm / Pistol Weaver red dot sight designed for use on pistols / short dots & LPVO's as an RMR or as a back up sight. It has a 3MOA target dot and auto adjusting brightness levels according to your environment lighting.
This product is covered by the Vector Optics Lifetime warranty, for more information please read below.
- Bottles or Bags
- 0.25g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.25g BBs which are designed to work in any Airsoft gun, performing best in Airsoft guns which fire between 280fps - 370fps, and are the go-to weight for any Airsoft skirmisher looking for an the perfect all around weight for a standard AEG. Whether you're new to Airsoft, or a regular skirmisher, this weight of BB will most likely be your go-to BB weight, and is the most commonly used by Airsoft players.
- 22,000 Shot Life
- 35 BBs Per Second
- GemTech Licensed
An AceTech Tracer Unit, which is concealed inside a fully licensed and CNC Machined Aluminium constructed replica of a GM-9 Suppressor from GemTech, a manufacturer of Suppressor for Real World Firearms. The internal LiPo battery can last for up to 22,000 shots, and can keep up with up to 35 BBs per second for maximum performance.
- Polymer construction
- 1200rnd Capacity
- Auto winding drum magazine for M4/AR15 AEG
Looking for some extra firepower to keep the enemies' heads down as you advance? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high density polymer with a modern design aesthetic, making it perfect for practically any M4/AR15 Airsoft AEG, especially those leaning into a more aggressive look, or those looking to sample the support weapon playstyle. This magazine is an auto winding design which requires 3x AAA batteries to operate.
- Biodegradable
- 1kg Resealable Bag
- 5.95mm +/- 0.01mm
A 1KG bag containing approximately 4000 high quality biodegradable competition grade Airsoft BBs, constructed from Polylactide (PLA) which degrades in around 60 days, and are polished to provide a smoother aerodynamically enhanced external surface.
- Foam Filled
- Spring Core
- 14mm CCW / CW
An Alloy constructed Suppressor with Foam Baffles and a Spring Core for support. The end caps of the Suppressor can be unscrewed to access the internals. Designed for Airsoft replicas with a 14mm CCW or CW Thread, this Muzzle Device is the perfect accessory to conceal an Inner Barrel extension, or just to add a personal touch to your Airsoft Gun.
This suppressor has a clever feature which is that it has a 14mm CCW thread on one end and a 14mm CW thread on the other, as such it is compatible with both thread types.
- 350rnd Capacity
- Key/wheel wound high-cap magazine
- For Airsoft M4/AR15 AEG
If you have a need for big capacity but you don't want the added bulk of a drum mag, the 350rnd NW-Mag from NUPROL may be just what you're after! This magazine is constructed from polymer and is styled after a famous and popular style of real world polymer magazine. This magazine is a high capacity mag which uses a clockwork mechanism internally to feed BBs into your Airsoft M4/AR15 AEG, and can be wound either using the winding wheel on the baseplate of the magazine or alternatively using the included winding key. The winding key can be inserted into the shell on the left side, and allows the magazine to be wound up super quickly without wearing your fingers to the bone! Another plus is the low price of this magazine, as there are very few others on the market that can match the price: capacity ratio of the NW-Mag!
- Screw Top Lid
- 3300 x 0.25g BBs
- 0.01mm Tolerance
A screw-top bottle that contains 3300 high quality, competition-grade 0.25g BBs from ASG, which are carefully selected to make the cut for the 'Devil' series - a premium range compared to the standard Blasters. They are made with a fine Tolerance of 0.01mm to ensure optimal performance in all Airsoft Guns. The 0.25g BBs are a great option for those playing outdoors, particularly if you have a high speed gun and want to keep overall BB costs down whilst maintaining top-tier performance.
- 200rnd Capacity
- Extended design
- For M4/AR15 AEG series
Looking for the biggest capacity with no rattle? This NUPROL 200rnd Mid-cap is an extended design, allowing an extra 70 BBs to squeeze in when compared to 30 round style mags. Its spring-loaded mechanism means you will be able to sneak around with ease with none of the tell-tale "battle rattle" you would have from high-capacity mags, and benefit from some extra firepower at the same time! This magazine is loaded just like any other Airsoft mid-cap, using a speed loader or loading rod through the fill/feed port at the top of the magazine body. The added benefit of this mag is its much more aggressive 40-round style design, which gives your rifle the "big boy" look of extra capacity, making it that more intimidating to face down with on the skirmish field.
- 14mm CCW threaded
- Aluminium Construction
- Slim Suppressor design
For those in the market for a suppressor for their AAP-01 Assassin GBB pistol, or for that matter any pistol requiring a slim style suppressor, consider the DDW Suppressor from Action Army. This suppressor attaches to any 14mm CCW male thread and is a lightweight aluminium design with attractive vents and a foam filling for some suppression effect.
Like this Airsoft Gun? Check out these awesome Products!
- £20 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Slide Forward to Open
- Available in Multiple Sizes
- 40mm MOSCART Launcher
Available in multiple sizes these 40mm Under Barrel Mounted Airsoft Grenade Launchers are designed to fire 40mm MOSCART Grenade, and can be attached to the underside of a range of Airsoft Rifles.
- Full metal construction
- Matt black with gold outer barrel
- Combat styled Hi-capa long boi
If your friends are using the R604, this pistol is the key to making them feel inadequate! Introducing the R608 Hi-capa Combat XL from Army Armament, a Hi-capa based pistol with a combat leaning, now in a new, lengthened flavour! The pistol combines the well liked aggressively stippled grips of the R604 and JW3 GBB pistols with a shorter dust cover and 5.5-inch outer barrel with extended slide; akin to the original "Silverballer" of the well-known man of hits video game but in a slightly more practical length!
- Full metal construction
- Functional De-cocking lever
- 20mm frame rail and 12mm female threaded barrel
If you are eyeing up a new sidearm but aren't up for the more common Hi-capa and EU series perhaps a classic Italian designed pistol would suit your tastes? Introducing the Raven R9 GBB, Raven's entry into the B9 series of Airsoft pistols. The real B9 was most famously issued to the US Army in the 1980s, replacing the venerable M1911.
- 1:1 Scale Replica
- Supreme build quality
- Beautiful licensed H&K trademarks
If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!
- Steel Gear Set
- Ready Mag System
- Quick Change Spring
The LT-15 Gen 2 Alpha Stock is a rather unique looking M4 Platform Airsoft Electric Gun that features an awesome Ready-Mag System Stock, as seen on the Needletail Series. This is a great opportunity to get an AEG with awesome internal components, handy features like a Quick Change Spring and the super cool Alpha Stock, without having to drop the £200+ on the Needletail Series.
- Textured Grip
- CO2 Compatible
- Square Ironsight
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a more compact version of the standard sized EU-Series pistol.
- Textured Grip
- Decocking Lever
- Gas Blowback Pistol
A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more.
- TM AWS Compatible
- AirsoftPro Compatible
- Integrated Carry Handle
Russian rifle lovers rejoice! This replica of the lesser-seen SV-98 platform is a Bolt Action Spring Powered Sniper Rifle which is constructed to be compatible with TM AWS parts, as well as AirsoftPro parts. If you're looking for a Sniper Rifle which is highly upgradeable and different from the norm, you just found it.
- 3 x Magazines
- Consistent Rifle
- Solid Construction
A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.
- Quick Change Spring
- Electric Blowback AEG
- Unique KeyMod Handguard
Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the weapon a slight recoil for enhanced realism.
- Adjustable Stock
- Rear Flip-Up Ironsight
- Part of the SA Core Range
Based off the rifle length M4A1 used by the US Army and Marines this rifle is a high quality replica built by Specna Arms as part of their CORE beginner rifles range.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
An Airsoft 6mm BB Gun, based on the M4, this is the latest version of the G&G Combat Machine. The weapon is constructed almost entirely from polymer including the Receiver, Stock, Pistol Grip with parts like the Magazine and Stock Tube being alloy.
- Full Alloy Design
- High Quality Finish
- Gas Blowback Pistol
A high quality, faithful, Airsoft 6mm BB replica of the Colt 1911A World War 2 (WWII) .45 ACP Pistol. This highly detailed piece really stands out from the crowd with the satisfying recoil and loud report when it fires.
- Fiberglass Polymer
- 14mm CCW Thread
- KeyMod Handguard
G&G have added yet another masterpiece to their infallible Combat Machine series, which features an 8.5" KeyMod Rail System, 14mm CCW Thread, Flip Up Ironsights and a Sliding Crane Stock for Crane Stock style Batteries.
- Electric pistol
- Semi / Fully automatic
- 20mm RIS / RAS rail
Wanting to get into Airsoft skirmishing in style? Or maybe you're looking for an iconic sidearm to complete your loadout.
The CM.121 has got all bases covered, with it's lightweight polymer construction and choice of semi or full auto, this electric Desert Eagle lets you rock up to a skirmish with a replica of the classic hand cannon.
- Compact CQB Weapon
- Rails for Sights and Accessories
- High Capacity M4 Magazine Adaptor
An Airsoft 6mm Airsoft AEG replica designed to look like the infamous P90, seen in many video games, TV series and Movies we all love (for the P90, of course!). This P90 is a bit of a special case, as it comes with a whopping 1500rnd box magazine/M4 high-cap adapter, allowing it to be fed using M4 AEG high-caps but with the added benefit of drum magazine-like capacity. If you are looking for a super small and mobile AEG with the ability to run all day long on a single magazine, or absolutely saturate the enemy team with 1500 BBs per fill, this is the AEG you need!