

- Full metal construction
- Evolution Airsoft ETS III pre-installed
- 6.01mm Tightbore inner barrel with rotary HOP-up
Introducing the latest version of the Evolution Airsoft E-416 DEVGRU AEG, sporting the usual Evolution Airsoft upgraded internals, now with their latest ETU, the ETS III pre-installed. The E-416 DEVGRU is equipped with a high torque motor, 6.01mm tight bore inner barrel with the latest rotary adjustable HOP-up unit, and a quick change spring system, granting you flexibility without having to mess with the finely tuned internals. The ETS III adds some major functionality to the platform, enabling a plethora of advanced functions including burst mode, binary trigger and ramping automatic fire, all of which can be programmed using the fire controls on the weapon itself.
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The E-416 DEVGRU is the latest addition to the Evolution Airsoft SAG (Smart Airsoft Gun) series. The SAG rifles were conceived as Evolution's attempt to outdo themselves with a new and improved electronic trigger unit, known as the ETS III. The ETS III is fully programmable and can be set for binary fire in semi-auto, ramping semi-auto, i.e. a short press for semi with a long press for full auto, bursts of varying durations and a sniper delay, a function which limits the semi-auto response to allow you to use your SAG as a bolt action sniper rifle. The ETS III also provides low battery protection, saving your battery from damage in case you forget to remove it after a game day, and active braking to protect the circuitry within the internals and prevent the motor from over spinning.
The externals of the E-416 DEVGRU are absolutely breathtaking, as with the previously released variants. Starting from the tip, we have a bright orange polymer flash hider pre-installed to comply with US and European laws. Don't panic! Inside the box, you will find a well-finished matt black alloy birdcage flash hider included. The flash hider attaches to the 10-inch alloy outer barrel via a male 14mm CCW thread, meaning if you want to mimic special forces, the addition of a suppressor or tracer unit is entirely possible.
The handguard of the E-416 DEVGRU is a free-floated quad 20mm Picatinny type handguard, measuring 9 inches in overall length, providing plenty of room for any accessory you had in mind, including PEQ laser units, with space to spare! 20mm Picatinny rails are available at the 3, 6, 9 and 12 o'clock positions, meaning no matter what you want to mount you will find a spot for it on the E-416 DEVGRU. Installed on the upper Picatinny rail you will find a set of multi-aperture dioptre sights offering fast target acquisition at close range and pinpoint accuracy for long-range shots. To select between apertures, simply turn the knurled section of the rear sight drum. These sights are similar to those found on the SMG-5 and are known to be amongst the most effective iron sight designs out there. If you prefer to use an optical sight, or you would rather run flip-up iron sights, these sights can be removed and replaced with any 20mm Picatinny compatible alternative.
The receiver of the E-416 DEVGRU follows the familiar M4/AR15 format, with a reprofiled magazine well matching the real rifle this AEG is based on. The fire selector lever can be found on the left side of the receiver, just above the pistol grip, and has a 90-degree throw between fire modes. Each fire mode is denoted with a colour coded pictogram, with the white crossed out projectile symbol indicating the safe mode, and the dangerous modes indicated with a red pictogram. This fire selector is set up to provide SAFE-SEMI-AUTO out of the box but can be programmed for various configurations using the ETS III.
The pistol grip is a TD style pistol grip, which is favoured amongst real operators and Airsofters alike for its comfortable shape and design. The grip features textured panels on either side of the grip, providing positive grip and enhancing the handling of the rifle. The trigger guard is a standard M4/AR15 flat type, with the option to add any AEG spec M4/AR15 trigger guard should you feel the need.
At the rear of the upper receiver, we can find the charging handle which has an extended latch installed. When pulled to the rear, the mock bolt carrier will retract and spring open the steel dust cover on the left side, revealing the rotary adjuster for the adjustable HOP-up unit. This device allows you to vary the amount of backspin applied to your BBs, and tune the E-416 for maximum range with your chosen ammo weight. With your adjustment complete, you can slap (or press, up to you!) the bolt release catch on the left side of the receiver, in the centre, and the mock bolt will fly forward with a satisfying "clack".
At the rear of the rifle, there is a steel buffer plate featuring sling points on either side and an AR15 style buffer tube which is compatible with the vast majority of aftermarket AR15 AEG stocks. The buffer tube provides 6 positions of adjustment for the stock, allowing you to set the E-416 up to suit your body type and loadout. The stock included on the rifle is a crane style buttstock, which pairs well with the TD style pistol grip to provide the DEVGRU aesthetic. The battery compartment is inside the stock itself and can be accessed by squeezing the two tabs at the toe of the stock together, after which the butt plate can be lifted free, and the battery plug removed. Inside the buffer tube, you will find a Deans connector to which you connect your battery. For the E-416 we recommend a 7.4V 1300mAh LiPo battery for easy installation, though larger batteries may also fit. With your battery sitting either inside the buffer tube (if there is room) or within the "cheeks" of the crane stock, the battery plug can be reinstalled, and the butt plate replaced by indexing the hook at the top inside the slot in the top of the stock body and pressing the butt plate back on.
The stock includes a QD sling socket on either side, allowing you to set the E-416 DEVGRU up for use with a quick detachable sling with the addition of a QD sling loop, whether you are left or right-handed. The stock also includes two slots for attaching a more traditional two-point rifle sling for those who prefer to avoid the rattle of QD loops. The butt plate of the stock is also rubberised, granting superb gripping qualities and ensuring the stock doesn't slip out of your shoulder when wearing body armour, as you should be if you are running a DEVGRU loadout!
Here's where we get to the juicy stuff. As much of a work of art as the E-416 is on the outside, the real story starts inside! The gearbox of the E-416 features a reinforced piston with steel teeth and a reinforced piston head, an upgraded selector plate, a metal spring guide with bearings, CNC machined cylinder with a reinforced cylinder head, 8mm ball bearing bushings, steel gears, and low-resistance wiring, all driven by a powerful high torque motor.
This superb internal feature set is further enhanced with the pre-installed ETS III electronic trigger unit, Evolution Airsoft's latest innovation in their quest to provide truly "smart" AEGs. The ETS III helps boost the rate of fire and trigger response, protects the battery and circuitry within the AEG, and monitors the gearbox to ensure full cycles are being completed and that the motor does not over spin. Also built into the ETS III is the ability to program your fire controls; offering burst mode, binary trigger, ramping semi-auto and a sniper delay, giving this ETU some serious flexibility and customisation options. To assist your quest to deliver BBs unto the enemy, the E-416 also sports a 6.01mm tight bore inner barrel combined with a rotary adjustable HOP-up unit, guaranteeing accuracy and the ability to reach out.
For those looking for an advanced AEG with full metal construction and a modern, special forces approved design, look no further than this, the latest ETS III equipped AEG from Evolution Airsoft. The combination of rock-solid internals with a highly advanced ETU is rarely seen for this price point, and even less so coupled with a metal receiver. For an SF impressionist or anyone who likes the E-416 visual style, you cannot go wrong with this rifle!
Features
- Full metal construction
- 9-inch Quad 20mm Picatinny handguard
- 20mm Picatinny railed receiver
- Functional dummy bolt catch
- Rotary adjustable HOP-up unit
- 6.01mm Tightbore inner barrel
- Quick change spring system
- 10-inch Alloy outer barrel
- TD style pistol grip - SF approved!
- High torque motor pre-installed
- Extended charging handle latch
- Ambidextrous sling plate - Ideal for a single point sling
- Additional sling point on the gas block
- Crane battery stock with rubberised butt plate
- QD sling sockets on either side of the crane stock
- 14mm CCW male threading - Ready for a tracer or suppressor!
- Rotary drum multi-aperture dioptre iron sights
- ETS III pre-installed - Battery protection, programmable fire modes!
Package Includes
- Evolution Airsoft E-416 10" DEVGRU AEG w/ETS. III
- 120rnd Medium capacity magazine
- Alloy birdcage flash hider
- Vertical foregrip
- User Manual
Specification
General
Weapon Type | Assault Rifle |
---|---|
Over 18 | Yes |
Defence / UKARA Required | Yes, No, |
FPS, using 0.20g BB | Approx.310fps ± 10%, using 0.20g BB |
Site Legal, using 0.20g BB | Yes |
Pre-Built | Yes |
Included Items |
|
User Skill Level | Beginner Player, Regular Player, |
Warnings | Li-Po - Never Leave Charging Unattended Li-Po - Only Use Approved Chargers Li-Po - Charge in a Fire Safe Area |
Weight and Dimension
Weight (KG) | Approx. 2.9kg |
---|---|
Length (Collapsed) | 69cm |
Length (Extended) | 78cm |
Construction
Primary Colour | Half-Tan |
---|---|
Secondary Colour | Bronze |
Pre Two-Toned | No |
Construction | Alloy outer barrel, buffer tube, receiver, handguard, iron sights. Steel dust cover, body pins, sling plate. Polymer stock and pistol grip. |
External Construction | Polymer Alloy Steel |
Internal Construction | Polymer Alloy Aluminium Steel |
Weapon Specific
Powered By | Electric |
---|---|
Blowback | None |
Weapon Platform | Assault Rifle, 416 Series, M4 / AR-15 / M16, AR, |
Magazine Style | Long Gun Magazine, Assault Rifle, M4 / AR Platform, STANAG, |
Fire Selector | Safe Semi Automatic Full Automatic Programmable |
Safety Features | Trigger Lock |
Shooter Configuration | Right Handed |
Weapon Configuration | Standard |
Weapon Scale | 1:1 |
Suggested BB Weight | 0.25g |
Hop-Up
Hop-Up Unit | Yes |
---|---|
Hop-Up Adjuster | Rotary |
Hop-Up Location | Behind mock bolt carrier, accessible when the charging handle is pulled and the mock bolt is locked to the rear. |
Furniture
Furniture |
|
---|---|
Rail System | 20mm RIS / RAS, 20mm Railed Receiver, |
Stock Setting | Sliding |
Stock Positions | 6 Position |
Sight Type | Iron Sights, Rotary Drum Iron Sight, |
Sling Options | Buffer Plate, Stock, Gas Block, |
Barrel
Outer Barrel Length (in) | 10'' |
---|---|
Outer Barrel Thread Type | Male |
Outer Barrel Thread Direction | CCW (Counter Clockwise) |
Outer Barrel Thread Size | 14mm |
Inner Barrel Diameter | 6.01mm |
Inner Barrel Length | 260mm |
Magazine Specific
Magazine Type | AEG, Medium Capacity, |
---|---|
Magazine BB Capacity | Approx. 120 Rounds |
Magazine BB Fill Method | Speed Loader |
Magazine BB Fill Location | Top |
Electric Gun Specific Information
Gearbox
Gearbox Version | V2 Gearbox |
---|---|
Gearbox Wiring | Rear Wired |
Gearbox Quick Change Spring | Yes |
Gearbox Electronic Trigger | Yes |
Split Gearbox Design | No |
Motor
Motor Type | High Torque |
---|
Battery Specific
Battery Connector | Deans |
---|
Compatible Battery
Compatible Battery Type | Li-Po |
---|---|
Compatible Battery Configuration | Crane |
Compatible Battery Voltage | 7.4v |
Product Testing Data
Test Description | 310 FPS +/- 10% |
---|---|
Tested Using | 0.2g ASG BLASTER |
Test Date | 26/04/2022 |
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |