Novritsch ASPC MOLLE Hydration Pack

  • MOLLE Hydration pack
  • Styled to match the ASPC, fits any MOLLE carrier
  • Hydration bladder not included - Requires a 1L bladder

If you are involved in full day or weekend skirmishes, staying hydrated is essential, both for your health and for maximum performance. The Novritsch ASPC MOLLE Hydration Pack is designed to hold a 1-litre hydration bladder (not included) and mounts to the back panel of any MOLLE-equipped plate carrier, though it is styled to match the NovritschASPC.

The ASPC MOLLE Hydration Pack is constructed from polyester with bungee cord and polymer toggles to keep everything tight. The rear surface is equipped with laser-cut MOLLE loops so you can mount extra pouches on top if needed, and access to the hydro pouch is provided by a centrally placed glove-friendly zip. Above the zip, we are treated to a strip of female velcro, allowing I.D or morale patches to be fitted to personalise your kit.

If you have your sights set on a hydration pouch with modern styling and ultra-low weight, the ASPC MOLLE Hydration Pack is the way to go, even more so if you run the ASPC plate carrier!

Full description


The ASPC MOLLE Hydration Pack is designed to hold a 1-litre hydration bladder (not included) and is styled to match the Novritsch ASPC Plate Carrier, complete with laser-cut MOLLE and a cutting-edge, skeletonised design. The Hydration Pack mounts to the rear of any MOLLE-equipped plate carrier and is nice and firm when in place thanks to having no less than 6 MOLLE hooks to secure it.

The bungee cord on each side serves to keep the bladder secure and stop it from moving around as you run, and inside the pack, we are treated to a pair of toggles to which you can secure your bladder to keep it upright for maximum comfort. At the top, there is a pre-cut hole through which a hydration hose can be routed, avoiding messy modifications for a clean and professional look.

The laser-cut MOLLE loops on the outer surface can be used to mount additional MOLLE pouches to increase load-carrying capacity, and the velcro strip at the top is perfect for adding a name tape, morale or I.D patch to personalise your setup. The internal dimensions allow for a bladder measuring approximately 18 x 1 x 20cm to be fitted inside, and an internal mesh pocket keeps it snugly in place. The pack is designed for Novritsch's Hydration Bladder V1 but should fit others as long as you measure up and double-check before ordering.

The mesh rear face of the Hydration Pack permits extra airflow when paired with the Novristch ASPC, so ASPC users need not fear losing that unique feeling of cool air flowing through the carrier with this pack installed. If you partake in longer Airsoft skirmishes, don't skimp on the important bits! Hydration is the key to performing at your best, keeping energy levels high and skirmishing all day in hot weather with no punishing after-effects!


  • MOLLE Hydration pack - Bladder not included
  • Styled to match the Novrtisch ASPC - Laser cut with weight reduction
  • Mounts to MOLLE - Fits the back of most MOLLE plate carriers
  • Sized to fit 1L Hydration bladders - 18 x 1 x 20cm approximate internal space
  • Hose routing hole at the top - Run your hydration hose through
  • Internal bungee toggles - Attach your bladder to these to keep it upright
  • Velcro panel on the outside - Perfect for adding I.D or Morale patches
  • External bungee cords - Helps keep the pack tight in to your rig, adjust as needed
  • Central glove-friendly zip for easy access

Package Includes

  • Novritsch ASPC MOLLE Hydration Pack



Tactical Equipment Type
Hydration System
Over 18 Only Icon
Over 18
Patrol Base - Warning Icon
This Hydration pack does not include a hydration bladder

Weight and Dimension

Weight KG Icon
Weight (KG)
Approx. 0.286kg
Product Height
Approx. 30cm
Product Width
Approx. 27.5cm


Colour Wheel Greyscale
Item Colour
Coyote Tan
Patrol Base | Camouflage Pattern | Flecktarn
Icon - V-Cam Multicam
Tropic Multicam
ACP Tropic
Construction Icon
Polyester with bungee cord and polymer cord toggles.
Material Icon
  • Polyester
  • Polymer
  • Bungee