Refine results
Refine by

Search results for '{{ query }}'

Viewing 30 of 324.
grid
list
£10.99
  • Pack Of 6
  • Fits To Cylinder Head
  • May Reduce FPS Slightly

Can be fitted inside other rifles including AEG gearboxes. The sorbo pad works by absorbing impact from your piston head, please note you should expect an FPS loss so you may have to improve the air seal or fit a slightly larger spring to regain your desired FPS.

£17.99
  • 1450mAh
  • 25C Rating
  • 11.1v 3S LiPo

A large stick type battery, designed to output a high power for fast trigger response and rate of fire for up to three quarters of a day on a slow charge.

From £89.99
  • 100rnd Magazine
  • Rotary HOP Adjust
  • Battery & Charger Inc.

A compact Airsoft Electric Pistol which is a replica of the CZ VZ-61, the perfect backup to another gun or as a Primary Gun for Close Quarter Scenarios.

£34.99
  • 30mm Lens
  • Red / Green Dot
  • 1x Magnification

A red and green dot sight designed to be attached to the top of Airsoft Guns and Weapons to allow for quicker target aquisition than traditional Iron Sights. 

£25.49
Was £29.99
Save £4.50
  • Aluminium construction
  • Extended design for fast access
  • Compatible with Hi-CAPA 5.1/4.3

An extended slide release is a great way to speed up your reload and encourage a consistent grip position on your pistol. The slide is machined from aluminium and provides a considerable extension to the standard slide stop on a Hi-CAPA GBB pistol with helpful serrations machined into its upper surface to provide enhanced grip.

Lightweight with a semi matte metallic texture, this slide is also a great way to customise and match the aesthetic of your beloved Hi-CAPA and create the perfect custom build.

£25.49
Was £29.99
Save £4.50
  • Aluminium construction
  • Extended design for fast access
  • Compatible with Hi-CAPA 5.1/4.3

An extended slide release is a great way to speed up your reload and encourage a consistent grip position on your pistol. The slide is machined from aluminium and provides a considerable extension to the standard slide stop on a Hi-CAPA GBB pistol with helpful serrations machined into its upper surface to provide enhanced grip.

Lightweight with a semi matte metallic texture, this slide is also a great way to customise and match the aesthetic of your beloved Hi-CAPA and create the perfect custom build.

£24.99
  • Lightweight aluminium
  • Skeletonised trigger
  • Flat trigger for additional speed

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

£24.99
  • Lightweight aluminium
  • Skeletonised trigger
  • Flat trigger for additional speed

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

£24.99
  • Lightweight aluminium
  • Skeletonised trigger
  • Flat trigger for additional speed

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

£24.99
  • Lightweight aluminium
  • Skeletonised trigger
  • Flat trigger for additional speed

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

£24.99
  • Flat trigger
  • Aluminium construction
  • For Ares AMOEBA series

Constructed from aluminium, this speed style flat surface trigger is great for quicker trigger manipulation and providing your rifle with the SPEEDQB aesthetic. It also features a ridged front texture for additional handling and grip. Lightweight, with a sweet metallic shine, this trigger is designed for Ares AMOEBA series.

£3.99
  • 3D PVC Patch
  • Velcro backed 
  • Depicts the Jolly Roger


Avast ye, me-hearties, a blackjack for buccaneers! The EmersonGear Jolly Roger Pirate 3D PVC Morale Patch depicts a variant of the famous "Jolly Roger" pirate flag in velcro-backed PVC with eye-catching raised and recessed detail and a black, white and grey colour scheme. The patch measures approximately 5 x 7.5 cm and is rectangular in shape, with cut corners to add a bit more visual interest. 

Whether ye be a scallywag, a swashbuckler or an old salt, this ensign will remind the scurvy dogs that freebooters give no quarter!

From £289.99
Was £334.99
Save £45.00
  • GATE ASTER Inside
  • Specna Orion Gearbox
  • Full Metal Construction

The SA-H23 from Specna Arms is a 416-style replica with a mid length front end, flat trigger and rotary drum dioptre sights. Being an EDGE 2.0™ Series replica, it also comes pre-installed with the GATE ASTER MOSFET V2 and its Orion Gearbox features a Quick Change Spring System, keeping up with the best Airsoft AEGs out there!

£5.99
  • O-Ring Sealed
  • 21mm Long
  • Improved Air Seal

A replacement or upgrade air nozzle for MP5 models of Airsoft Electric Gun, with an O-ring installed for greater air seal and efficiency.

£6.79
Was £7.99
Save £1.20
  • O-Ring Sealed
  • 20.09mm Long
  • Improved Air Seal

A replacement or upgrade air nozzle for Airsoft electric SMG-5Ks.

£39.99
  • Aluminium construction 
  • 14mm CCW male threaded tip
  • For SigAir MPX AEG

If you want your SigAir MPX even shorter than it comes from the factory this kit will do it! The Laylax Outer Barrel Base & Battery Block Set for SigAir MPX includes a super short outer barrel base and the Laylax Battery Block, allowing you to install a barrel extension or a suppressor which runs beneath the handguard for the integrally suppressed look. 

This part replaces your original outer barrel with an aluminium barrel base measuring 8.5cm overall length, with 4.5cm protruding ahead of the receiver when installed. Also included is the Laylax battery block, designed to keep your battery contained within the handguard when your barrel is pointed down. The battery block won't fit over a suppressor but if you decide to fit a barrel extension it should fit any with a diameter of less than 19mm. 

£43.99
  • High rise mount for T1 / T2 Style
  • Minimalist aesthetic
  • Built in iron sights

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

£43.99
  • High rise mount for T1 / T2 Style
  • Minimalist aesthetic
  • Built in iron sights

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

From £109.99
  • 400rnd Magazine
  • Suppressor Included
  • Battery & Charger Inc.

An Airsoft Electric Pistol replica of the MAC-10 Sub Machine Gun, which comes included with a Battery & EU Pin Charger, as well as the proprietary suppressor which this SMG is rarely seen without.

£44.99
  • 3 x RIS Rails
  • Multiple Reticules
  • Large Sight Picture

This rather large Red Dot Sight from Theta Optics offers a large sight picture for easy target acquisition, multiple choices of reticule, integrated rail mount and 3 x short 20mm RIS sections for the connection of extra accessories.

£14.99
  • Spring Action
  • Loads 6 x Shells
  • Dan Wesson Speedloader

Instantly fill your revolver with a new set of BB carry shells! Suitable for both 4" and 8" Dan Wesson revolvers. This method is much quicker than replacing each shell individually, and makes reloading your Airsoft revolver a dream.

£17.99
  • Skeletonized Design
  • For Picatinny rails
  • Very lightweight

A highly lightweight and attractive foregrip for Airsoft Picatinny rail systems that is constructed from high-quality CNC Aluminium Alloy, and has had most of its' internals gutted out to bring this grip to shockingly light 104g!

£11.99
  • Polymer Construction
  • Semi-Transparent Black
  • Official Magazine Coupler

A semi transparent magazine coupler allowing you to connect your ASG CZ Scorpion Evo magazines together for faster reloading.

£13.99
  • Ambidextrous
  • Belt Paddle System
  • Lightweight Holster

A Double Magazine Retention Pouch designed for WE Europe Airsoft 1911 Pistol Standard Sized Magazines. The holsters are constructed from Durable Polymer and are designed to allow the user to gain access to their Magazine and draw them as quick as possible.

From £459.99
  • One-Piece Hop-Up
  • Integrated MOSFET
  • Fully Warsport Licensed

The Krytac AEG series are designed with quality and functionality in mind, and to produce Airsoft AEG rifles with highly realistic and modern features to a quality standard never seen before. The LVOA-C is constructed from Alloy with an aluminium handguard and a polymer pistol grip and stock, just like a real AR15. 

£11.99
  • Lightweight Holster
  • Belt Paddle System
  • Ambidextrous



A belt-mountable Double Magazine Retention Holster designed for WE Europe Airsoft F226 Standard Sized Magazines, allowing users ready and easy access to their magazines.

£12.99
  • Holds 2x STANAG Mag
  • MOLLE Compatible
  • Retention Held

A double magazine pouch designed to hold up to two M4 / M15 / M16 / STANAG / PMAG Magazine, and can be attached to MOLLE Compatible Rigs, Vests and Bags.

This style of magazine pouch is perfect for Airsoft skirmishers who are usually up close and personal, hiding in bushes, or for those who simply want a faster magazine reload time.

£12.99
  • Holds 2x STANAG Mag
  • MOLLE Compatible
  • Retention Held

A double magazine pouch designed to hold up to two M4 / M15 / M16 / STANAG / PMAG Magazine, and can be attached to MOLLE Compatible Rigs, Vests and Bags.

This style of magazine pouch is perfect for Airsoft skirmishers who are usually up close and personal, hiding in bushes, or for those who simply want a faster magazine reload time.

£12.99
  • Holds 2x STANAG Mag
  • MOLLE Compatible
  • Retention Held

A double magazine pouch designed to hold up to two M4 / M15 / M16 / STANAG / PMAG Magazine, and can be attached to MOLLE Compatible Rigs, Vests and Bags.

This style of magazine pouch is perfect for Airsoft skirmishers who are usually up close and personal, hiding in bushes, or for those who simply want a faster magazine reload time.

£12.99
  • Magazine Adapter
  • For NUPROL Fastloader
  • Fits '36' Series Magazines

A Polymer constructed adapter for the NUPROL Fastloaders, which lets you refill '36' series magazines rather than just M4 magazines. This is great news for anyone who runs a '36' series Airsoft Gun and has a tonne of magazines that all need filling up before games. Or maybe you just don't like to carry spare magazines, and need the ability to quickly top up your mags on the move. Either way, if you have a NUPROL Fastloader and want to use it on something other than M4 magazines, you need one of these adapters.