Airsoft Handguards

If you need more20mm Picatinny rail space than you've had hot dinners, you need the Specna Arms CNC 10” 20mm Picatinny RIS Handguard for M4/AR-15! This piece is constructed from CNC aluminium, meaning it has tight tolerances, is high-quality, and surprisingly durable!

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't contact the outer barrel, so there is no force applied to the handguard, negatively affecting accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though it should fit the vast majority of M4/AR-15 AEG and GBBR platforms.

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard will do the trick!

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard will do the trick!

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard will do the trick!

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

If you are an AK fan but are getting green-eyed over the M4/AR-15's accessory options, a railed handguard will cure that! The CYMA 20mm Picatinny Railed Handguard for AK AEG is constructed from solid high density polymer and provides 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for 20mm Picatinny accessories.

The side rails are short lengths, ideally designed to mount a tactical flashlight or aiming laser but can also be removed if you prefer slick sides on your handguard. The top rail features 12cm of rail space, allowing for a forward mounted red dot sight to be fitted for that slick PMC look. The bottom rail is 11cm long, providing enough room at the front so you can add a vertical or angled foregrip, or even a bipod if you see fit. The sides of the lower handguard also include ribs for extra grip, similarly to the standard issue AK-10x polymer handguards. If you want to mount your mission essential kit to your AK AEG or GBBR this handguard is one of the cheapest ways to do it!

If you're working on a low-cost, low-weight build, the Delta Armory Polymer 20mm Picatinny RAS for M4/AR-15 Delta Rings is a fine choice. Priced at less than a Big Mac meal but packaged with a pair of rail covers, this handguard is constructed from high density polymer, tipping the scales at a mere 180g!

Like the real KAC RAS it is based on, the Delta Armory RAS boasts 20mm Picatinny rails at 3, 6, 9 and 12 o'clock and is a two-part design with a separate upper and lower handguard. This means that once installed you can remove the lower handguard without tools, either for a battery change or to mount an M203 launcher. The included rail covers are designed to protect your hands and keep your rails crisp and in-spec but can be removed by holding the metal tab at the end down and sliding them off. 

Compatibility-wise, this handguard is designed to be paired with a Delta Ring and Handguard Cap so can easily be installed on M4A1, CQBR, XM177 and other classic M4/AR-15 configurations with the same procedure as the original ribbed handguards.

Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

If you're seeking a lightweight handguard for your sleeper build, the Delta Armory Mock KeyMod Handguard w/ 20mm Rails for M4/AR-15 is a fine choice. This handguard is styled after the real steel URX 3 handguard and is constructed from high-density polymer, keeping the price and weight to a minimum.

Known as a "mock KeyMod" handguard, the attachment slots on this handguard are not compatible with most KeyMod accessories though you do have the option of mounting 20mm Picatinny accessories to the included rail sections. 3 Rail sections are included and pre-installed but can be repositioned wherever you need them on the attachment slots at 3, 6 and 9 o'clock.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you want the style of a modern KeyMod handguard but not the weight, the Delta Armory Mock KeyMod Handguard w/ 20mm Rails for M4/AR-15 should fit the bill!

If you're looking for stylish and realistic external upgrades for your M4/AR-15, you should consider the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail! This CNC-machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with a 20mm Picatinny rail along the top. It comes in 4 different lengths: 7.5 and 9.5-inch for CQB builds, 10.5-inch for mid-length and 12.5-inch for carbine-length platforms.

The SR stands for suppressor-ready, as this handguard has space within for a 1.5" diameter Airsoft suppressor. This provides an integrally suppressed look which is sleek and stylish, matching modern AR15 systems. It also comes with Griffin Armamnet trademarks, adding to the style and realism.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads, which is almost all of them, thankfully. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail will do the trick!

If you're looking for stylish and realistic external upgrades for your M4/AR-15, you should consider the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail! This CNC-machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with a 20mm Picatinny rail along the top. It comes in 4 different lengths: 7.5 and 9.5-inch for CQB builds, 10.5-inch for mid-length and 12.5-inch for carbine-length platforms.

The SR stands for suppressor-ready, as this handguard has space within for a 1.5" diameter Airsoft suppressor. This provides an integrally suppressed look which is sleek and stylish, matching modern AR15 systems. It also comes with Griffin Armamnet trademarks, adding to the style and realism.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads, which is almost all of them, thankfully. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail will do the trick!

If you're working on a classic M4A1 build or you broke your handguards and need cheap replacements, the Delta Armory Ribbed M4A1 Handguards for M4/AR-15 are ideal. These handguards are constructed from high density polymer with the classic M4A1 ribbed design and a slightly wider profile than XM177 handguards. 

These are two-piece handguards designed to mount to M4/AR-15 delta rings found on M4A1, XM177, CQBR and other classic M4 configurations. If you aren't sure if these handguards are right for your AR, contact us for clarification. Ideal for lightweight builds or the retro aesthetic, the Delta Armory Ribbed M4A1 Handguards for M4/AR-15 are affordable and functional!

If you've lost your mock cleaning rod, your AK will be looking odd! Here's what you need to fix that. The CYMA Mock Cleaning Rod for AK-47/74 AEG is designed for the CYMA CM.04x AK AEG series but should also fit other AKs from other brands which use the LCT or VFC build style. The rod is constructed from steel, and it goes without saying, you should never attempt to use this rod to clean the barrel of your Airsoft gun, it is only for the look!

A replacement Gas Tube for Airsoft AK models, constructed from Alloy to the original specification as a direct replacement. If you own an AK Model and need a replacement Gas Tube or are looking at making Handguard changes, you can't go wrong with a spare.

If you like to keep pace with the latest British Army-issued firearms, you must be planning a KS-1/L403A1 build! The Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is the handguard you need to complete it. Constructed from superb quality CNC aluminium with flawlessly crisp matching, this rail is phenomenal quality, as we might expect from Airsoft Artisan. 

The L403A1 handguard measures 13 inches in overall length and is equipped with a 20mm Picatinny rail on top and M-LOK slots at 3, 6 and 9 o'clock positions with extra slots at the offset angles so you can position your accessories perfectly. Also included in the box is a set of outer barrel shims to completely eliminate wobble, allowing the L403A1 handguard to be paired with a wide variety of barrels on PTW, GBBR and AEG M4/AR-15 platforms. If you're working on a KS-1 build and want it to be stitch-perfect, the Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is a must!

Lost a handguard pin from your sneaky SMG-5? That's a shame, but fortunately, we have the solution! The CYMA Handguard locking pin is designed for the CM.041 SD6 AEG series, but may also fit other SMG-5 SD6 AEGs, though we are unable to confirm which ones. The pin is constructed from alloy and is packaged as a single pin, so if you have lost both pins make sure you order two!

Sights set on modernizing your AKS-74U? CYMA have provided the solution in the form of an aluminium Keymod handguard set for their AKSU. Featuring Picatinny rail at 12 o'clock and keymod at 3, 6 and 9, there is no shortage of space here to add your spetznasy gear.

If you are gearing up to spruce up your old AK AEG this might be handy! The Front Handguard Cap with Sling Point from CYMA is an original replacement part for the CM.04x series AKM/AK74 AEG. The part is constructed from alloy and includes the rotary locking lever for the LCT/VFC/real steel style of AK handguard attachment. This part is intended for the CM.04x series but should also work with VFC and LCT AKs, though the part may need modification. This part will not fit an AKS-74U rifle, it is designed for full size AK handguards only.

Is your SMG-5/MP-5 looking left out amongst its railed-up brethren? Here is the solution! It's all included in the box, a 20mm rail system, 2 rail covers, and a vertical grip to stop those sexy rails from slicing your hands to pieces. Cyma even throw in a metal outer barrel! It is not essential to install the outer barrel to make the rail system compatible but it is nice that it is included!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you have a SCAR and want to improve its style and functionality, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is a must! This beauty extends your SCARs rail to allow for more M-LOK attachment points. It is designed to fit major brands like Cybergun(GBB only), VFC and Tokyo Marui, but may fit others too with modification. There is a choice of either 2.2" or 4.25" so you can get the perfect extension for your desired loadout.

It is constructed from aluminium, making it very lightweight and barely noticeable when attached to the front of your SCAR. There are QD points on either side, giving you the option to add sling points or other QD attachments. There are M-LOK attachment points littered all over this handguard extension, so you have plenty of additional space for your mission essentials.

It replaces the traditional 20mm Picatinny rail section on top with an additional M-LOK slot, matching the overall sleek design of this MREX handguard and allowing you to attach a rail section if you please. If you want to turn your SCAR into a smoking hot rifle, the PTS Syndicate Kinetic SCAR MREX M-LOK MK2 Handguard is certainly a step in the right direction!

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

If you have plans to style up your AK for 21st century combat the CYMA Aluminium M-LOK Handguard adds M-LOK accessory slots so you can mount the latest and greatest mission essentials and benefit from reduced weight! The set includes an upper handguard with "Grater" style vents and a lower handguard with M-LOK negative space attachment slots at the 3, 6, and 9 o'clock positions.

Both the upper and lower handguard are constructed from aluminium using CNC machining and are finished with matt black anodising for a smooth and flawless finish. Compatibility-wise, this handguard should fit practically an AK47/74 platform AEG or GBB rifle but will not fit AKS-74U rifles due to their shorter length handguards. Give your AK the PMC or civilian tactical look!

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

If you are rocking the Sig Air MPX and you are worried your battery will poke out of the handguard, worry no longer, Laylax have an innovative solution! The Handguard Battery Block for MPX AEG is designed to mount to the outer barrel using a grub screw and close the front end of the handguard up to stop your battery from hanging out when the SMG is pointed down. The block is constructed from aluminium with a matt black anodised finish and is styled to look like the gas block of the bigger MCX, meaning it shouldn't detract too much from the realistic looks of the MPX. This is why we love Laylax, they always come up with a nifty solution for these little niggles!

If you are gearing up to spruce up your old AK AEG, or replace your damaged handguard cap, this might be handy! The LCT Front Hand Guard Cap For AK Variants is an original replacement part for the LCT LCK variants. The part is constructed from steel and includes the rotary locking lever for the LCT/VFC/real steel style of AK handguard attachment. This part is intended for the LCT products but should also work with VFC and other AKs, though the part may need modification. This part will not fit an AKS-74U rifle, it is designed for full-size AK handguards only.

It features a sling point on the side, making this cap an ideal way to sling your AK platform whilst out on the battlefield. If you're looking for a replacement cap for your Russian rifle, the LCT Front Hand Guard Cap For AK Variants is just what you need!