- Can Carry Batteries
- Ergonomic Grooves
- CNC Aluminium Alloy
A highly lightweight and attractive foregrip for Airsoft KeyMod rail systems that is constructed from high density CNC Aluminium Alloy, and has had most of its' internals gutted out to bring this grip to shockingly light 79g.
Finance Options
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship all around world, with delivery not only to the UK, but to most of the EU and select Worldwide locations as well. We provide a working day by road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change, and are only a rough guide. For more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£4.95
Approx.
UK Next Day
£5.95
Approx.
Highlands / Islands
£12.99*
Approx.
EU
£12.99+*
Approx.
* Please note that Scottish Highlands, Islands and EU post prices can vary wildly. Prices range from £8.99, up to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The foregrip has lots of ergonomic finger grooves that improve grip and handling over your weapon, and also make it incredibly aesthetic. It is attached to your KeyMod rail system by connecting the two lugs into your rail and tightening the Allen keys from inside the grip with the included Allen Key. A large O-Ring sits around the base of the grip which helpfully acts as a resting point for the Allen key when you're trying to attach the foregrip, making it much easier to install. The other purpose of this O-Ring is to secure any contents you have put inside the grip. The inside of this foregrip is hollowed out, allowing you to carry 4 x CR123A or 2 x AA batteries inside the grip, whilst the O-Ring securely holds them in place.
Features:
- Gorgeous skeleton design
- Incredibly lightweight
- Locking mechanism for securing on your rail
- Long grip for better grip with gloves
- High density CNC Aluminium Alloy construction
- Ergonomic finger grooves improve handling
- Can hold 4 x CR123A or 2 x AA batteries
Package Includes:
- Skeletonized KeyMod Vertical Foregrip
Special Instructions:
Vertical Foregrips are designed to give you a different handling point on your weapon. On Real Steel guns, Vertical Grips are designed to give you more control over your weapon whilst firing, whereas with Airsoft they are designed to give you a more comfortable point to hold your gun.
The further up your RIS rail or Hand guard you place your grip, the longer it takes to turn and the closer the grip is to your trigger hand the quicker it is to turn. This can be used to your advantage. Whilst indoors it is advantageous to be able to move quicker and snap to targets at close range, so you would have the fore grip as low down the rail as possible, whereas outdoors you would be taking longer range shots and place the grip further down the rail allowing for more precise movement.
Specification
General
|
External Part Type
|
Grip
|
|---|
Construction
 |
Black
|
|---|---|
 |
Alloy
|
Weight and Dimension
|
Product Length
|
Approx. 8.8cm
|
|---|---|
 |
Approx. 0.08kg
|
Part Specific
 |
20mm RIS / RAS
|
|---|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.
You might also like
- Folding Foregrip
- Side Screw Tightens
- Tightly Locks into Place
A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements.
- Modular Design
- Ridged & Stippled
- Polymer Construction
A handstop for M-LOK rail systems that is modular, allowing the user to set it up perfectly for them and providing a stable platform to pull forward on the rifle with your lead hand, vastly improving stability.
- Adjustable size
- Engraved & Stickered
- Mock PEQ Battery Box
A mock PEQ Box, designed to hold PEQ size Airsoft batteries, but can be extended with the use of an included extension module for larger batteries.
- Vertical Foregrip
- Bottom Screw Tightens
- Tightly Locks into Place
A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails.
- Easy To Mount
- Lightweight & Durable
- Internal Hidden Storage
A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.
- Built In Laser
- Angled Foregrip
- Textured & Ridged
An ergonomic angled foregrip with a special trick up its' sleeve... it has a built in laser! Designed to make sure your aim is steady and on target.
- Non Functional
- PEQ Style Battery Box
- Mock Engraving & Stickers
An Airsoft battery box for Front Wired AEGs, designed to imitate the appearance of a real PEQ-15 laser/light module and hide batteries.
- Ambidextrous design
- Affixes to the lower rail
- Acquire firing stance quickly
A 20mm RIS lower mounted point designed to stop the operator of the weapons' hand from sliding forward in front of the barrel.
- Heavy Duty
- Excellent Grip
- Very Thick Grip
If you are looking for a grip that also converts into a bipod but looking for weight and solid construction then this is for you.
- Functional
- Laser & Light
- Pressure Pad Inc.
A functional PEQ box for 20mm RIS rail systems which offers a laser and flashlight, with the option of both a toggle switch and pressure pad on/off.
- 20mm RIS Rail
- CZ Scorpion Design
- Wing Shield Protectors
A replacement Front Iron Sight for the Airsoft Electric Gun CZ Scorpion Evo. An incredibly High Quality product, this Iron Sight has been manufactured specifically for Airsoft use by the real CZ Scorpion OEM team.
- Hollow Center
- Very Secure Fitting
- Fits Any 20mm Rail
A comfortable, aesthetically pleasing, practical attachment for any Airsoft rifle, carbine or submachine gun with 20mm RIS rails.
- Non Functional
- PEQ Style Battery Box
- Mock Engraving & Stickers
A mock PEQ Box, designed to hold PEQ size Airsoft batteries for your AEG weapon enabling easy access and storage for batteries on front wired weapons by mounting onto a 20mm RIS Rail system.