Airsoft Attachment & Accessory Discounts

A replacement Gas Block for LCT branded LCK47 models, which is made to the original specification from Steel as a replacement part.

A precisely engineered and uprated loading handle for the terrifying ASW338LM Airsoft sniper rifle from Ashbury Precision Ordnance.

This is for those of you looking for quicker reloads as well as making your Action Army Pistol look 'blinged out'. If you love your pistol and want to treat it to something special, this makes a nice addition to your mod. But how does it reduce reload speeds you ask? Well the magwell has been designed with a wide flare and bevelled inner surface to help guide your magazine into your pistol smoothly and instantaneously; "Eyes up" reloading will become second nature to you, perfect for competition shooting as well as skirmishing.

The perfect battery to give you enough juice for a full weekend of Airsoft milsim action. 9.6v and 4600mAh of power. Commonly used within M249, M16 and M14 variants.

For those of you looking to bling out your Hi-capa, you've certainly found the right page! Designed for use with your 5.1 gas blowback Hi-capa, this replacement part will extend the receiver and rail from 5.1 to 7 inch, much like the mighty Hi-capa Dragon!

Constructed from anodised alloy, the frame has a low weight and a sleek, stylish aesthetic. Completing the look is the front compensator, available in your choice of 3 metallic colours. But it's not just about looks, as it will extend the lower rail to allow for 4.5 inches of real estate to mount the tactical devices of your choosing.

For those of you looking to bling out your Hi-capa, you've certainly found the right page! Designed for use with your 5.1 gas blowback Hi-capa, this replacement part will extend the receiver and rail from 5.1 to 7 inch, much like the mighty Hi-capa Dragon!

Constructed from anodised alloy, the frame has a low weight and a sleek, stylish aesthetic. Completing the look is the front compensator, available in your choice of 3 metallic colours. But it's not just about looks, as it will extend the lower rail to allow for 4.5 inches of real estate to mount the tactical devices of your choosing.

The KAR98k Steel Scope Rail Mount from Vector Optics mounts to your KAR98k receiver (following modification - see Special Instructions) and provides two slots of Picatinny rail, ideally suited to mounting a rifle scope with separate mount rings. This mount is intended for use on real rifles, but does match the geometry of the Airsoft receivers should you choose to add it to your Airsoft build.

If you want to bring your M1928 Thompson AEG up a level in realism, this conversion kit will do it! The King Arms Wood Conversion Kit comprises a real wood stock, a real wood vertical foregrip/handguard and a real wood pistol grip, along with an alloy butt plate and steel mounting screws.

To fit this conversion kit you will need the sling mount from your original stock and the mounting bolts for the stock, foregrip and pistol grip. As with any conversion kit, this kit may require modification to fit but should be compatible with the King Arms M1928 AEG, the Cybergun M1928 Thompson AEG and the CYMA CM.051 AEG. If your Thompson needs an added dose of authenticity, a real wood kit is the way to go!

Another high quality Airsoft internal component from Guarder, this V2 compatible tappet plate is constructed from durable polycarbonate.

Had a little mishap when taking your B9 GBB apart? KJW have just the thing. The B9 series GBB magazine catch is an original replacement part, and fits both the KJ Works B9 GBB series and the LS B9 GBB series. The set includes the magazine release and its spring.

Though it is designed by KJW for their B9 GBB series this mag catch may be compatible with other B9 GBBs but we aren't able to test this so please consider carefully before buying.

A set of four Rubber-constructed Rail Covers for G&G SR Series KeyMod Handguards. If you own a G&G SR Series AEG and you want a comfortable hand-hold which provides good grip even when wearing gloves, you need a set of Rail Covers. This set is designed for the G&G SR Series; it may fit other KeyMod Handguards but it is designed for and fits best on the G&G Armament SR Series Airsoft Electric Guns. To install to a Handguard, simply push the slots into the desired KeyMod slot and then push the Rail Cover forwards to 'lock' it in place.

A series of Steel manufactured Motor Pinion Gears for either the TOP M60/M249 or Tokyo Marui AEG motors.

We get it, you want to light the enemy up with your PEQ box, but the switch is so far away...enter the Hot Button from WADSN. The button can be mounted directly to M-LOK or Keymod rails, saving messing around with velcroing standard pressure switches, and can place the main control for your PEQ box wherever there is a room!

If you've bagged yourself a bargain backup pistol, perhaps a spare magazine would make it a bit more useful! Introducing the LS B84 Gas magazine, a spare original magazine for the LS B84 NBB pistol. The magazine holds 15 rounds and can be loaded using a speed loader or by hand, through the fill/feed port on the front of the magazine. The gas fill valve is located on the magazine base and this magazine is compatible with green gas, ASG Ultrair, and summer gas.

Proven in battle, everyone has use for Ni-Mh crane stock batteries! The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance so you can use any charger as long as it's NiMh compatible, just make sure to not leave the battery charging unattended.

This battery has a voltage of 9.6v and a capacity of 1600mAh and is comprised of 8 cells working in unison, connected via the Deans/T-Plug connector.

This Ni-Mh sports a crane configuration, one of the most common types and is perfect for split battery compartments, most often seen in M4 stocks, M16, SMG-5 and AKs with full stocks. The battery measures 12x1.8x1.8cm per 4x cells and has a wire length of roughly 8cm.

A complete Switch Assembly for a variety of AEGs, which includes Low Resistance Wiring with either a Mini Tamiya or Deans Connector on the end.

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

If you are looking to take your Vorsk VX26 out into the cold look no further! This CO2 magazine will ensure you get the absolute best out of your GBB pistol, even over the winter months. Remember to lubricate both the magazine and pistol to prevent damage to your seals as CO2 contains no lubricant. This magazine uses 12g CO2 bulbs without threading.

If you plan on taking your WE Pistole 38 GBB Pistol out on the skirmish field but you feel like one 14rnd magazine is nowhere near enough ammo for you, then you need the WE 14rnd Gas Magazine for P38 Pistol! This magazine is the same as the one that comes with the pistol, so there will be no concerns with compatibility.

It holds 14 BBs and is filled using a speedloader on the feed lips at the top of the magazine. This is a low-capacity but is still 6 ammunition more than the real steel pistol. Its alloy shell protects the polymer internals and gas chamber, which can be filled at the bottom of the magazine in the gas valve.

Pick up some spare magazines for your P38 pistol and take it with you to your next skirmish, or pick up a couple of mags for some test firing in the garden!

An original replacement for the handguard of an LCT branded LCKM, which is made with Real Wood and Steel, and comes included with the Gas Tube. The part is easy to install, and is made to the same specification as the original part. This is the ideal purchase to replace your LCT LCKM handguard or convert another AKM series model.

A Real Wood handguard for the LCT LCK74 which is made to the original spec and includes a Steel Gas Tube. This is an ideal replacement for a damaged handguard, or to convert another LCT AK74 model.

This stupendously massive and imposing Suppressor is designed for AK replicas with a 24mm CW Thread, and is crafted from Aluminium 6061 and Steel to the usual high standard that LCT pride themselves on. Also featuring a spring-loaded Inner Barrel Extension, this is the Suppressor for you if you want to stand out anywhere.

As far as Hi-capa parts go, Airsoft Masterpiece are currently producing some of the best the Airsoft world has ever seen! The Steel Grip safety Type 2 replaces your original beavertail grip safety with a precisely machined steel part, guaranteed to perform when you need it!

For those looking for a more realistic handling experience from their Hi-capa 4.3, Airsoft Masterpiece has come through again, this time with a steel outer barrel complete with 11mm CW female threads! This outer barrel is constructed entirely from steel, and is immaculately finished down to each dummy locking ridge and the .45 ACP engraving on the chamber. Adding a steel barrel can alter your pistols handling characteristics considerably, raising the point of balance and making it feel more like a real firearm.

A Steel constructed replacement Receiver & Folding Stock for the LCT M70AB2 Airsoft Electric Gun, which features a Stamped Steel receiver and Steel Underfolder Stock, complete with Sling Loop.

Airsoft Masterpiece brings its unparalleled pedigree to Hi-Capa frames to upgrade your pistol and take it from good to next level! The frame is constructed from CNC machined aluminium, which not only looks fantastic but weighs a mere 86g, making your pistol as light as a feather and handle like a dream.

Available in a variety of metallic colours to give your Hi-Capa a sleek, ultra-modern look that's sure to stand out from the crowd. This kit comes included with hammer housing and advanced sear, which allows for smoother cycling and cleaner trigger feel in comparison to the stock Hi-Capa kit.

Installing an Airsoft Masterpiece frame will let your Hi-Capa run as smooth as butter and look even better, while also increasing durability and overall lifespan. Available in a variety of colours.