All Airsoft Pouches

If you are looking for some super slick magazine pouches with a unique modern twist, Novritsch is the way to go! This mag pouch is designed for EVO/SMG-5 magazines and has a very good retention system, due to the polymer inserts, that grips the magazine securely when you're not trying to take it out. 

The pouch consists of a fabric outer cover in a camouflage/colour pattern of your choice with a polymer inner retainer that helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser-cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you are looking for some super slick magazine pouches with a unique modern twist, Novritsch is the way to go! This mag pouch is designed for EVO/SMG-5 magazines and has a very good retention system, due to the polymer inserts, that grips the magazine securely when you're not trying to take it out. 

The pouch consists of a fabric outer cover in a camouflage/colour pattern of your choice with a polymer inner retainer that helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser-cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

For those of you that need your shells as close as possible, ready for a quick reload. This holds up to 6 Airsoft shotgun shells and is constructed from water resistant 1000D Polyester is mounted to the buttstock of your shotgun of choice.

The straps are secured in place with Velcro and are adjustable to suit your piece, and the shells are held tightly in place with elasticated loops.

You can be sure when skirmishing that your spare shells are always within quick and easy reach for rapid reloads.

For those of you that need your shells as close as possible, ready for a quick reload. This holds up to 6 Airsoft shotgun shells and is constructed from water resistant 1000D Polyester is mounted to the buttstock of your shotgun of choice.

The straps are secured in place with Velcro and are adjustable to suit your piece, and the shells are held tightly in place with elasticated loops.

You can be sure when skirmishing that your spare shells are always within quick and easy reach for rapid reloads.

For those of you that need your shells as close as possible, ready for a quick reload. This holds up to 6 Airsoft shotgun shells and is constructed from water resistant 1000D Polyester is mounted to the buttstock of your shotgun of choice.

The straps are secured in place with Velcro and are adjustable to suit your piece, and the shells are held tightly in place with elasticated loops.

You can be sure when skirmishing that your spare shells are always within quick and easy reach for rapid reloads.

If you want one MOLLE front panel to handle all missions, the MOLLE Multi-Mission Front Panel is what you need. This MOLLE-mounted front placard is designed to be mounted to the front of plate carrier vests but can also be mounted to chest rigs, backpacks and anything else with MOLLE compatibility.

The panel is constructed from 1000D Nylon, boasting high stitch density for durability and features a wide variety of open-topped magazine pouches with adjustable elastic retainers at the top for security. If your mission requires a mix of shotgun shells, rifle magazines, pistol magazines and other kit, this front panel is ideal for your setup.

If you want one MOLLE front panel to handle all missions, the MOLLE Multi-Mission Front Panel is what you need. This MOLLE-mounted front placard is designed to be mounted to the front of plate carrier vests but can also be mounted to chest rigs, backpacks and anything else with MOLLE compatibility.

The panel is constructed from 1000D Nylon, boasting high stitch density for durability and features a wide variety of open-topped magazine pouches with adjustable elastic retainers at the top for security. If your mission requires a mix of shotgun shells, rifle magazines, pistol magazines and other kit, this front panel is ideal for your setup.

If you want one MOLLE front panel to handle all missions, the MOLLE Multi-Mission Front Panel is what you need. This MOLLE-mounted front placard is designed to be mounted to the front of plate carrier vests but can also be mounted to chest rigs, backpacks and anything else with MOLLE compatibility.

The panel is constructed from 1000D Nylon, boasting high stitch density for durability and features a wide variety of open-topped magazine pouches with adjustable elastic retainers at the top for security. If your mission requires a mix of shotgun shells, rifle magazines, pistol magazines and other kit, this front panel is ideal for your setup.

Ultra compact and MOLLE compatible Airsoft pistol magazine storage. Hold up to 2x magazines either single or double stack incredibly close to your RIG to keep a slim profile.

Ultra compact and MOLLE compatible Airsoft pistol magazine storage. Hold up to 2x magazines either single or double stack incredibly close to your RIG to keep a slim profile.

Ultra compact and MOLLE compatible Airsoft pistol magazine storage. Hold up to 2x magazines either single or double stack incredibly close to your RIG to keep a slim profile.

A stock mounted magazine pouch, designed to fit on M4 and M16 type Stocks and holds a single STANAG 5.56mm style magazine. The pouch itself is constructed from 600D Nylon, with polymer buckles and velcro securing straps.

A stock mounted magazine pouch, designed to fit on M4 and M16 type Stocks and holds a single STANAG 5.56mm style magazine. The pouch itself is constructed from 600D Nylon, with polymer buckles and velcro securing straps.

A stock mounted magazine pouch, designed to fit on M4 and M16 type Stocks and holds a single STANAG 5.56mm style magazine. The pouch itself is constructed from 600D Nylon, with polymer buckles and velcro securing straps.

A heavy duty panel for a heavy duty loadout, featuring three rifle magazine pouches secured by elastic retainers at the top of each pouch.

This is perfect for Buckle Up chest rigs, which allow you to quickly swap out your main pouches depending on the situation. The rear face of the panel is Velcro clad, securing the pouch in place when connected to a Buckle Up system.

A heavy duty panel for a heavy duty loadout, featuring three rifle magazine pouches secured by elastic retainers at the top of each pouch.

This is perfect for Buckle Up chest rigs, which allow you to quickly swap out your main pouches depending on the situation. The rear face of the panel is Velcro clad, securing the pouch in place when connected to a Buckle Up system.

A heavy duty panel for a heavy duty loadout, featuring three rifle magazine pouches secured by elastic retainers at the top of each pouch.

This is perfect for Buckle Up chest rigs, which allow you to quickly swap out your main pouches depending on the situation. The rear face of the panel is Velcro clad, securing the pouch in place when connected to a Buckle Up system.

An adjustable pouch which has been designed to be a one size fits all magazine pouch, allowing the use of magazines ranging from standard M4 / STANAG Magazines up to AK and G36 types. 

An adjustable pouch which has been designed to be a one size fits all magazine pouch, allowing the use of magazines ranging from standard M4 / STANAG Magazines up to AK and G36 types. 

An adjustable pouch which has been designed to be a one size fits all magazine pouch, allowing the use of magazines ranging from standard M4 / STANAG Magazines up to AK and G36 types. 

An adjustable pouch which has been designed to be a one size fits all magazine pouch, allowing the use of magazines ranging from standard M4 / STANAG Magazines up to AK and G36 types. 

Stack up 2x Airsoft SMG magazines side by side in the new VX utility system for the ultimate in security and low profile design. Stay slim, keep a lower profile and move faster.

If you need a rifle mag pouch which fits almost every assault rifle replica out there, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is what you need.  This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any rifle mag, from M4/AR-15 mags to AK and 7.62x51 DMR magazines. The only mags that won't quite fit in are HK417 mags, though AR36 mags fit in nicely with some adjustment. 

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you run multiple rifle platforms in a single day but don't want to bring multiple rigs, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is the pouch you need!

Pistol mag retention or rifle mag retention? Why not both?

With two stacked pockets in a low profile design, held together with elastic bungee retention cord, you can be sure that both your main and sidearm mags are kept safe and secure and to hand for quick reloads all in place!

The magazine pocket is designed for STANAG type mags in mind with the front most pistol pockets able to fit a whole range of pistol magazines such as EU17 or 1911 systems.

Mounted by MOLLE straps with push button studs, this pouch is for those of you that like to keep things compact and efficient, combining the best of both worlds for those speedy reloads in the heat of battle.

Pistol mag retention or rifle mag retention? Why not both?

With two stacked pockets in a low profile design, held together with elastic bungee retention cord, you can be sure that both your main and sidearm mags are kept safe and secure and to hand for quick reloads all in place!

The magazine pocket is designed for STANAG type mags in mind with the front most pistol pockets able to fit a whole range of pistol magazines such as EU17 or 1911 systems.

Mounted by MOLLE straps with push button studs, this pouch is for those of you that like to keep things compact and efficient, combining the best of both worlds for those speedy reloads in the heat of battle.

Build the ultimate VX rig with rapid access and customisation with no tools and no looping required! Simply drop in double-sided Velcro design to offer high levels of gear positioning.

Build the ultimate VX rig with rapid access and customisation with no tools and no looping required! Simply drop in double-sided Velcro design to offer high levels of gear positioning.

Part of the new VX family of products from Viper Tactical, run slim and mountable to any Velcro faced system. Keep it simple, keep it clean and keep it fast moving.

Part of the new VX family of products from Viper Tactical, run slim and mountable to any Velcro faced system. Keep it simple, keep it clean and keep it fast moving.

If you need sleek, compact and modern pistol mag pouches, Emersongear has what you need! The Laser Cut MOLLE Pistol Magazine Pouch is made from strong 500D Cordura branded fabric, the military standard fabric used in a wide range of real steel combat gear and civilian applications requiring high strength. 

This pouch mounts to MOLLE webbing found on tactical vests, plate carriers, chest rigs, backpacks and belts, featuring additional laser-cut MOLLE on the front so you can stack pouches on top if needed. Fitment-wise, this pouch is designed for standard "service pistol" sized magazines and should fit Hi-Capa, EU series, B9/92, F/P226 and Glock pistol mags securely. Available in a range of camo options to suit almost any loadout, the Emersongear Laser Cut MOLLE Pistol Magazine Pouch is a great solution with modern, low-profile styling!