Airsoft Silencers, Suppressors & Tracer Units

If you want to give your platform a sneaky style, this suppressor is for you! This Specna Arms Covert Tactical Silencer is constructed from aluminium and has both 14mm CCW threads and 14mm CW threads, one on each side. This simple suppressor is very light and has lots of length options, making it suitable for everything from GBB pistols to DMRs without compromising any performance.

This Specna Arms suppressor is marked with "SHHHHHH" and someone shushing their lips, making it the perfect choice for a humorous skirmisher who likes to remain sneaky on the battlefield. If you want that sneaky final touch for your Airsoft platform, you won't find anything more fitting and on the nose than this Specna Arms SHHHHHH Silencer!

If you're looking for a uniquely menacing suppressor with an ultra-modern real steel lineage, the Airsoft Artisan SRD762 Dummy Suppressor belongs on your gat! Well suited to Sig MCX and Rattler builds but compatible with any Airsoft platform with a 14mm CCW male threaded barrel, the SRD762 makes a fantastic finishing touch to any modern build, particularly a .300 Blackout!

Externally, the SRD762 takes a walk on the wild side, equipped with a menacing spiked front end designed for breaching doors in real steel form. The exterior profile is ribbed to match the real thing, intended to help dissipate built-up heat but serving in Airsoft terms to keep the SRD762 looking faithful to its real steel counterpart. 

Inside the SRD762 you'll find a spacer designed to accommodate a 34mm diameter tracer module and in the box, you'll get an aluminium tube in case you want to run an extended inner barrel through it or prevent your BBs from hitting the inside. If a modern suppressor is on your shopping list, the Airsoft Artisan SRD762 Dummy Suppressor is as well-made and good-looking as they come! 

If you are looking for a Tracer Unit with Russian styling the KP-9 Spitfire Tracer Unit from 5KU is one to keep an eye on. This device is based on the real world MPI KP-9 flash suppressor used by Russian Special Forces with their PP-19-01 SMGs and is ideal for any 9mm style Airsoft SMG but will fit any Airsoft rifle with a 14mm CCW male threaded barrel.

This KP-9 isn't just about the looks either, inside you will find a Spitfire Tracer insert which illuminates green tracer BBs and provides a realistic muzzle flash effect each time you fire. The unit can be operated in flash only, tracer only or tracer and flash mode, giving plenty of options for the aggressive, the realism focussed and the more stealthy playstyles out there. Whether you run a PP-19 AEG or you are looking for the most menacing looking Spitfire tracer unit out there, this will do the trick!

If you're looking for a sneaky suppressor with a quick detach design, the Novritsch Fast Attach Suppressor System is for you! This package consists of a steel flash hider and an aluminium suppressor. They are designed to work with one another to create a fast attach system so you can quickly equip or unequip your suppressor depending on the situation you find yourself in whilst out on the battlefield.

The suppressor features internal foam and cavities designed to baffle and reduce the noise of excess air or gas from your Airsoft replica. Both products are constructed from durable materials, designed to survive the rigors of a tough skirmish. As well as being hard-wearing, they have also been crafted with exceptional aesthetics, the flash hider silhouettes real steel variants and the suppressor boasts a sporty fluted design that is sure to catch the eyes of your fellow skirmishers.

If you're ready to take your operations clandestine, there is no better way than with the Novritsch Fast Attach Suppressor System. Stealth and style are both important for the battlefield, and with this suppressor system, you get both in one!

If you're seeking an ultra-modern suppressor to top off your build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is a fine choice. This suppressor is modelled after the real steel SCI-6 and includes all the flawless details and crisp machining we would expect from an Airsoft Artisan suppressor made from CNC aluminium and steel. 

The suppressor body is made from CNC aluminium and the QD collar is made from steel, giving you strength where needed for a lifetime of reliable mounting and removing. The included 3-prong flash hider is also made from steel and is a beautiful piece all by itself; a squat and menacing design well suited to modern rifle builds. If a suppressor with high-end styling is all you need to finish off your dream build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is the way to go!

If you're working on a DMR build or otherwise lengthy platform, the PTS Syndicate Dead Air Sandman-L Tracer version is what you need to top it off! A detailed, licensed replica of the real steel Dead Air Sandman-L, this mock suppressor is pre-fitted with a muzzle flash tracer module and is licensed by Dead Air Silencers. This, of course, means licensed trademarks across the design, ideal for builds which prioritise realism!

Designed to mount to the KeyMo QD interface present on the included steel flash hider (or other PTS KeyMo muzzle devices), the Sandman-L is quick to attach and remove, allowing you to set up in seconds for the scenario ahead and never be fixed to one configuration. The internal tracer module is powered by a rechargeable battery and recharged via a USB Type-C cable, making it convenient and economical to run compared to older tracer designs which use disposable alkaline batteries.

The Sandman-L is the longest of the Sandman suppressor line, ideal for DMRs and other long platforms seeking the stealthy aesthetic. If you're working on an ultra-modern build and need a suppressor which makes others feel inadequate, the PTS Syndicate Dead Air Sandman-L Tracer version will do just that!

If you're working on a DMR build or otherwise lengthy platform, the PTS Syndicate Dead Air Sandman-L Tracer version is what you need to top it off! A detailed, licensed replica of the real steel Dead Air Sandman-L, this mock suppressor is pre-fitted with a muzzle flash tracer module and is licensed by Dead Air Silencers. This, of course, means licensed trademarks across the design, ideal for builds which prioritise realism!

Designed to mount to the KeyMo QD interface present on the included steel flash hider (or other PTS KeyMo muzzle devices), the Sandman-L is quick to attach and remove, allowing you to set up in seconds for the scenario ahead and never be fixed to one configuration. The internal tracer module is powered by a rechargeable battery and recharged via a USB Type-C cable, making it convenient and economical to run compared to older tracer designs which use disposable alkaline batteries.

The Sandman-L is the longest of the Sandman suppressor line, ideal for DMRs and other long platforms seeking the stealthy aesthetic. If you're working on an ultra-modern build and need a suppressor which makes others feel inadequate, the PTS Syndicate Dead Air Sandman-L Tracer version will do just that!

If you're going for the sneaky look on a tight budget, the FMA Navy Silencer belongs on your build! An aluminium mock suppressor designed to mount to common 14mm CCW male barrel threading found on most AEGs and GBBRs, the Navy Silencer sports white laser-engraved Navy SEAL markings on the outside and a convenient knurled section which makes the suppressor easy to mount and remove.

Measuring 19.7 x 3.2 cm approximately, the Navy Silencer looks nice and proportional on M4 CQBR builds, with the appropriate thickness to simulate a rifle-calibre suppressor. If a stealthy loadout is your next project, the FMA Navy Silencer will give you what you need!

Have you got an inner barrel too long for the rest of your Airsoft platform? If so, then you need this exact suppressor! The Specna Arms 14mm CCW/CW Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of the Specna Arms suppressor has text on it which reads "I NEED TO HIDE AN INNER BARREL", making it great for rifles which come with polymer mock suppressors already installed, as these platforms often have extended inner barrels. It's also just the perfect bit of British dry humour that will definitely be appreciated on the battlefield.

Have you got an inner barrel too long for the rest of your Airsoft platform? If so, then you need this exact suppressor! The Specna Arms 14mm CCW/CW Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of the Specna Arms suppressor has text on it which reads "I NEED TO HIDE AN INNER BARREL", making it great for rifles which come with polymer mock suppressors already installed, as these platforms often have extended inner barrels. It's also just the perfect bit of British dry humour that will definitely be appreciated on the battlefield.

Have you got an inner barrel too long for the rest of your Airsoft platform? If so, then you need this exact suppressor! The Specna Arms 14mm CCW/CW Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of the Specna Arms suppressor has text on it which reads "I NEED TO HIDE AN INNER BARREL", making it great for rifles which come with polymer mock suppressors already installed, as these platforms often have extended inner barrels. It's also just the perfect bit of British dry humour that will definitely be appreciated on the battlefield.

Have you got an inner barrel too long for the rest of your Airsoft platform? If so, then you need this exact suppressor! The Specna Arms 14mm CCW/CW Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of the Specna Arms suppressor has text on it which reads "I NEED TO HIDE AN INNER BARREL", making it great for rifles which come with polymer mock suppressors already installed, as these platforms often have extended inner barrels. It's also just the perfect bit of British dry humour that will definitely be appreciated on the battlefield.

Have you got an inner barrel too long for the rest of your Airsoft platform? If so, then you need this exact suppressor! The Specna Arms 14mm CCW/CW Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of the Specna Arms suppressor has text on it which reads "I NEED TO HIDE AN INNER BARREL", making it great for rifles which come with polymer mock suppressors already installed, as these platforms often have extended inner barrels. It's also just the perfect bit of British dry humour that will definitely be appreciated on the battlefield.

Looking for a tiny suppressor that will fit inside your rail system (if the inner diameter is over 32mm)? The FMA NAVY SEALs Dummy Silencer provides a cost-effective solution! The inside of this suppressor is foam-filled, meaning you will experience some noise dampening of your gun's muzzle report! The suppressor has both CCW and CW threading, one thread on one end, one on the other, perfect for those who are unsure of their rifle's threading!

This suppressor is constructed from lightweight aluminium and has US NAVY SEALs markings on it, making it the perfect attachment for those who want a military finish for their Airsoft platform. Get the FMA NAVY SEALs Dummy Silencer, an affordable, stylish rifle attachment!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

If you're building a stealthy setup on a tight budget, the FMA Aluminium Dummy Silencer is a must-have! This aluminium mock suppressor is designed to fit standard 14mm CCW male barrel threads, commonly found on most AEGs and GBBRs. It features various external markings depending on the variant you choose, along with a knurled section for easy installation and removal.

Measuring approximately 19.7 x 3.2 cm, this silencer has a clean, balanced look, ideal for M4 CQBR builds. Its realistic thickness gives off the impression of a true rifle-calibre suppressor. If you're planning a covert-style loadout, the FMA Aluminium Dummy Silencer has you covered!

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

A mock suppressor designed to replace the standard flash hiders on Airsoft replica weapons, by using the same 14mm counter clockwise outer barrel threads, and features zombie hunter insignia. 

A 14mm CCW compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, teammate locations, run infection themed skirmishes and generally lighting up the dark with bioluminescence.

If you want the stealthy aesthetic for your SMG or rifle, this is how you do it! The VORSK QD Suppressor with 5-Lug Flash Hider; 14mm CCW is compatible with the VORSK VMP series and now any Airsoft replica with a 14mm CCW male threaded barrel thanks to the inclusion of the super aggressive 5-lug flash hider. The suppressor mounts to the 5-lug muzzle device via a QD interface, meaning it can quickly be removed and reinstalled when needed.

Constructed from aluminium with a foam filling, this suppressor should dampen the muzzle report of your SMG or rifle slightly but its main role is to provide slick looks. There also is plenty of space inside to fit a custom foam filling or tracer module if you are happy with a bit of fabrication!

If you are looking for a sneaky aesthetic and reduced muzzle report, the Novritsch Rifle Suppressor will give you just that! This suppressor is constructed from aluminium and has internal baffles made from acoustic foam which will reduce the muzzle report of your primary and make you harder to locate.

The Novritsch Rifle Suppressor is compatible with any Airsoft gun which uses 14mm CCW male barrel threading and has an aggressive ported front end, providing some visual interest to the design which marks it out as something a bit different from the usual, boring tube suppressors.

On the inside, Novritsch has gone above and beyond, using 2 different sized baffles to muffle the muzzle report, widening at the end to prevent BBs from shattering inside and ruining that perfect shot. The front cap can also be removed, so if you want to change the filling to your own secret suppression formula, you are free to do so. Whether you are taking your sniper rifle build in a sneaky direction or you are creating an assault rifle with an emphasis on stealth, the Novritsch Rifle Suppressor is the perfect finishing touch!

If you are looking for a tracer unit with a unique look and rainbow flash functionality, the NUPROL BOCCA Series Rainbow Tracer unit should be on your list! This unit is available in 3 different styles to suit any preference, from the hyper-aggressive "Shark" version to the moderately menacing "Octagon" and the more discrete and milsim-friendly "Stubby" model and all models offer the option to choose the colour of the dazzling muzzle flash effect.

The BOCCA Series Rainbow Tracer unit mounts to any Airsoft gun with 14mm CCW male threads at the tip of the barrel, making it suitable for practically any AEG rifle straight out of the box. Naturally, being a tracer unit, this device also houses UV LEDs which make green tracer BBs glow on their way to the target, giving you a significant advantage when it comes to instinct aiming, low-light operations and psychological warfare.

Power is provided by an internal Lithium battery which can easily be recharged using the included Micro USB charger cable, and the housing is constructed from aluminium to provide the strength needed for the rigours of Airsoft skirmishing. If you are looking for a tracer unit with rainbow flash effect and an interesting external design, the BOCCA series tracer units have something for any taste!

If you are looking for a tracer unit with a unique look and rainbow flash functionality, the NUPROL BOCCA Series Rainbow Tracer unit should be on your list! This unit is available in 3 different styles to suit any preference, from the hyper-aggressive "Shark" version to the moderately menacing "Octagon" and the more discrete and milsim-friendly "Stubby" model and all models offer the option to choose the colour of the dazzling muzzle flash effect.

The BOCCA Series Rainbow Tracer unit mounts to any Airsoft gun with 14mm CCW male threads at the tip of the barrel, making it suitable for practically any AEG rifle straight out of the box. Naturally, being a tracer unit, this device also houses UV LEDs which make green tracer BBs glow on their way to the target, giving you a significant advantage when it comes to instinct aiming, low-light operations and psychological warfare.

Power is provided by an internal Lithium battery which can easily be recharged using the included Micro USB charger cable, and the housing is constructed from aluminium to provide the strength needed for the rigours of Airsoft skirmishing. If you are looking for a tracer unit with rainbow flash effect and an interesting external design, the BOCCA series tracer units have something for any taste!

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

Whether you're looking for a suppressor which can change its length to suit your mood or your MK23 needs a new can, the Novritsch Modular Suppressor V1; Standard is a fine choice! This aluminium suppressor unscrews at different lengths, allowing you to set it up as a lengthy 22.5cm or stumpy 10.5cm length, with a 14.5cm option for those in between! 

By default, the Modular Suppressor V1 mounts to 16mm CW male threads, making it perfect for MK23s, but also includes a 14mm CCW adapter which allows it to mount to most Airsoft AEGs, including the SSR9 DSG, SSR4 and other Novritsch AEGs. Inside, you'll find acoustic foam "baffles", intended to absorb the sound emitted from the muzzle and make your firing position harder to locate. 

On an AEG, this does make a slight difference, but on a MK23 the difference is staggering, turning the "crack" from the muzzle into a barely discernable dull "thud", ideal for sneaky snipers and others who appreciate the in-built discretion of the MK23/SSX23 platform. If you need a suppressor as sneaky as you are with plenty of options mounting options and a customisable, modular design, the Novritsch Modular Suppressor V1; Standard is the one to go for!

If you are looking for a suppressor you can quickly and easily remove as and when it suits you, these are what you are looking for! Available in 3 different lengths to suit any situation, the 5KU Special force suppressor gives a serious and aggressive look to your AEG and alters the muzzle report to make you harder to locate!