All Airsoft Submachine Guns

If you're into the excitement and immersive experience of a GBB primary and need a CQB optimised platform, the VORSK VMP-2C Compact GBB SMG is one to watch. The smallest member of the VORSK VMP-2 line, the Compact is designed for cutting tight corners up close and also makes a killer backup platform to cover VMP-2D DMR users when the enemy gets too close!

Part of the VORSK Modular Platform ecosystem, the VMP-2C offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2C truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

On the outside, the VMP-2C reminds us of the iconic TEC-9 SMG reinvented for the 21st century, equipped with a 14mm CCW male threaded barrel, M4/AR-15 GBBR compatible pistol grip and 1913/20mm Picatinny stock interface at the rear, ready for the most modern stocks out there. If you're after a loud, violent and super-fun CQB platform which will never encounter a corner too tight to handle, the VORSK VMP-2C Compact GBB SMG should be your next platform!

If you like the VMP-2 look but are more of a CQB player, the VMP-2S was designed with you in mind! Bringing the uniquely lightweight and agile VMP-2 design to the close-quarters role, the VMP-2S is a shortened version of the VMP-2M, ideally suited to fast-moving playstyles and close to mid-range engagements.

Part of the VORSK Modular Platform ecosystem, the VMP-2S offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2S truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally, the VMP-2S is ready to rock with an M-LOK handguard, 20mm Picatinny railed receiver, VORSK 5-Lug QD flash hider, 14mm CCW male threaded barrel and 1913/20mm Picatinny interface at the rear equipped with the VMP-1 side folding stock. With plenty of customisation options built in, immersive recoil and loads of performance potential, the VORSK VMP-2S Short GBB SMG is ready when you are!

If you like the VMP-2 look but are more of a CQB player, the VMP-2S was designed with you in mind! Bringing the uniquely lightweight and agile VMP-2 design to the close-quarters role, the VMP-2S is a shortened version of the VMP-2M, ideally suited to fast-moving playstyles and close to mid-range engagements.

Part of the VORSK Modular Platform ecosystem, the VMP-2S offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2S truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally, the VMP-2S is ready to rock with an M-LOK handguard, 20mm Picatinny railed receiver, VORSK 5-Lug QD flash hider, 14mm CCW male threaded barrel and 1913/20mm Picatinny interface at the rear equipped with the VMP-1 side folding stock. With plenty of customisation options built in, immersive recoil and loads of performance potential, the VORSK VMP-2S Short GBB SMG is ready when you are!

If you like the VMP-2 look but are more of a CQB player, the VMP-2S was designed with you in mind! Bringing the uniquely lightweight and agile VMP-2 design to the close-quarters role, the VMP-2S is a shortened version of the VMP-2M, ideally suited to fast-moving playstyles and close to mid-range engagements.

Part of the VORSK Modular Platform ecosystem, the VMP-2S offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2S truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally, the VMP-2S is ready to rock with an M-LOK handguard, 20mm Picatinny railed receiver, VORSK 5-Lug QD flash hider, 14mm CCW male threaded barrel and 1913/20mm Picatinny interface at the rear equipped with the VMP-1 side folding stock. With plenty of customisation options built in, immersive recoil and loads of performance potential, the VORSK VMP-2S Short GBB SMG is ready when you are!

If you're looking for an ultra-compact CQB primary and you're an AK kinda guy, the G&G Armament PRK9 RTS Nano Draco AEG belongs in your arsenal! This full metal beast is inspired by real steel AK Draco pistols, the PAK-9 Pistol and the PP-19 SMG, the result being absolutely unique! A squat, menacing AK-derived design, the PRK9 feeds from unique 9mm style magazines showcasing mock rounds through its clear polymer shell for maximum realism.

Inside, we're equipped with the proven G&G GT Advanced series internals, making the PRK9 11.1V LiPo-ready straight out of the box. The gearbox shell is alloy and well-machined throughout, the 18:1 steel gearset runs on 8mm ball bearing bushings and the whole setup is driven by the renowned G&G Irfit 25K Orange high-speed motor, resulting in a super-snappy trigger response and way above average rate of fire. G&G's programmable MOSFET/ETU system also features inside, ensuring your electrical components run at maximum efficiency and offering the option to run 3-round burst mode instead of full auto.

On the outside, this lil guy is very well equipped, rocking a 20mm Picatinny railed handguard, railed receiver top cover, 14mm CCW male threaded barrel and side folding AR buffer tube with the G&G GOS V4 sliding stock. If you've been tempted by an ARP9 thanks to its fantastic performance but prefer the AK look, the G&G Armament PRK9 RTS Nano Draco AEG will suit you perfectly!

If you're a fan of the VMP-2 but prefer a stealthy aesthetic, the VMP-2SD Suppressed GBB SMG is the one for you! An integrally suppressed version of the compact VMP-2S, the VMP-2SD is rocking the  "Honey Badger" vibe with its menacing integrally suppressed front end and square profile M-LOK handguard, ideal for sneaky skirmishers who aren't afraid to try something new.

Part of the VORSK Modular Platform ecosystem, the VMP-2SD offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2SD truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally equipped with the ultra-modern 1913/20mm Picatinny stock interface, an aluminium skeleton side folding stock, ambidextrous fire controls, and a 20mm Picatinny railed receiver, the VMP-2SD is ready to be customised to suit your liking. If you're the silent type seeking GBB recoil, realism and immersion, the VORSK VMP-2SD Suppressed GBB SMG is your ideal primary!

If you're a fan of the VMP-2 but prefer a stealthy aesthetic, the VMP-2SD Suppressed GBB SMG is the one for you! An integrally suppressed version of the compact VMP-2S, the VMP-2SD is rocking the  "Honey Badger" vibe with its menacing integrally suppressed front end and square profile M-LOK handguard, ideal for sneaky skirmishers who aren't afraid to try something new.

Part of the VORSK Modular Platform ecosystem, the VMP-2SD offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2SD truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally equipped with the ultra-modern 1913/20mm Picatinny stock interface, an aluminium skeleton side folding stock, ambidextrous fire controls, and a 20mm Picatinny railed receiver, the VMP-2SD is ready to be customised to suit your liking. If you're the silent type seeking GBB recoil, realism and immersion, the VORSK VMP-2SD Suppressed GBB SMG is your ideal primary!

If you're a fan of the VMP-2 but prefer a stealthy aesthetic, the VMP-2SD Suppressed GBB SMG is the one for you! An integrally suppressed version of the compact VMP-2S, the VMP-2SD is rocking the  "Honey Badger" vibe with its menacing integrally suppressed front end and square profile M-LOK handguard, ideal for sneaky skirmishers who aren't afraid to try something new.

Part of the VORSK Modular Platform ecosystem, the VMP-2SD offers a wide range of customisation options, from quick-swap trigger groups to different power nozzles and alternative external parts, allowing you to make the VMP-2SD truly yours with a custom touch. The 6.03mm tightbore inner barrel and HOP-up bucking are GBB/VSR spec, giving you access to the best of the best when it comes to accuracy and range upgrades.

Externally equipped with the ultra-modern 1913/20mm Picatinny stock interface, an aluminium skeleton side folding stock, ambidextrous fire controls, and a 20mm Picatinny railed receiver, the VMP-2SD is ready to be customised to suit your liking. If you're the silent type seeking GBB recoil, realism and immersion, the VORSK VMP-2SD Suppressed GBB SMG is your ideal primary!

If you always wanted an MPX but you want it to shoot as good as it looks, this is the one to go for! The Bolster Tuned Sig Sauer MPX Upgraded AEG is based on the SigAir MPX but has all the creases ironed out, and is thoroughly upgraded on the inside with some of the best parts in the business.

Inside, you will find the phenomenal Gate TITAN MOSFET making its first appearance in a Bolster Tuned build, providing exceptional trigger response and rate of fire while adding a plethora of customisation options and eliminating the potential of trigger contact corrosion. The TITAN is paired with a Warhead 27K Base Brushless motor for guilt-free full auto mayhem thanks to its low heat build-up and exceptional reliability.

To make the most of the TITAN and Warhead combo, the team added Laylax EG 13:1 High-speed gears, further increasing rate of fire into the realms of the incredible. Laylax gears have a superb reputation amongst techs and were an essential replacement for the stock SigAir gearset. The Laylax Prometheus Purple HOP-up Rubber and Nub makes an appearance, as we might expect, and the usual Bolster Tuned internal polish and expert shimming process has also been carried out, with phenomenal results.

There is more going on with the Bolster Tuned MPX than we can list here (see the Full Description for more details), but check out our YouTube review to see this thing doing its good work. If you've been held back from buying an MPX because you have high standards when it comes to performance, this is the MPX for you!

If you're into Russian firearms designs and fancy an SMG, the ARCTURUS PP-19-1 Vityaz AEG w/Optical MOSFET should please you! Based on the real steel PP-19-01 Vityaz-SN, this beastly replica is made almost entirely from steel, with the exception of its realistic polymer handguards and pistol grip. Naturally, this gives the PP-19-01 enormous weight for such a compact platform, ideal for realism fans but not for the faint of heart!

Inside, the PP-19-01 brings more good things to the table! Based around a version 3 gearbox shell with a pre-installed Optical MOSFET to provide programmable fire modes, improve the trigger response and protect the internal circuitry from excess wear. Also inside is a 25K high torque motor, an 18:1 CNC Steel gear set, a 6.03mm stainless steel tightbore inner barrel and a plethora of reinforced gearbox internals. Minimum upgrades are required with this AEG, that's for sure!

With an external build which makes it genuinely hard to distinguish from the real thing, pre-upgraded internals with a focus on reliability and a sprinkle of advanced features thrown in, this Vityaz SN is one of the best replicas currently available. If you need an SMG to complement your AK or want a unique, head-turner of a primary with incredible externals and impressive down-range effect, you're in good hands with the ARCTURUS PP-19-1 Vityaz AEG w/Optical MOSFET!

If you're looking for a longer platform for outdoor skirmishing with no compromise when it comes to agility, check out the G&G Armament PRK9L Draco PCC AEG! Boasting full metal construction and a unique AK-based external design, the PRK9L is inspired by real steel Pistol Caliber Carbines popular in the 3-Gun competition sphere. Naturally, handling is impeccable, with all the ergonomic pitfalls of the AK truly cured, extended fire controls for speedy manipulation and an ultra-light extended M-LOK handguard well suited to modern shooting stances.

Inside, we're equipped with the proven G&G GT Advanced series internals, making the PRK9L 11.1V LiPo-ready straight out of the box. The gearbox shell is alloy and well-machined throughout, the 18:1 steel gearset runs on 8mm ball bearing bushings and the whole setup is driven by the renowned G&G Irfit 25K Orange high-speed motor, resulting in a super-snappy trigger response and way above average rate of fire. G&G's programmable MOSFET/ETU system also features inside, ensuring your electrical components run at maximum efficiency and offering the option to run 3-round burst mode instead of full auto.

As far as AK platforms go, the PRK9L is utterly unique, feeding from 9mm style magazines with sleek styling we're surprised an AK-derived design can pull off. If you need a real head-turner of a primary with killer performance and loads of accessory options, you can't go wrong with the G&G Armament PRK9L Draco PCC AEG!

If you're into modern Russian firearms and seek an SMG, the ARCTURUS PP-19-01 Vityaz ZTAC SP1 CQB AEG w/Optical MOSFET is a fine choice! This full metal PP-19-01 replicates the SMG version of the AK platform but is dressed up externally with Zco-style furniture for a super slick, modern look. This beast is constructed almost entirely from steel and CNC-machined aluminium, with a flawlessly realistic finish applied to the externals and the hefty feel an AK-derived platform deserves.

On the inside, things are equally special as the PP-19-01 is rocking an Optical MOSFET, high torque motor, a plethora of reinforced internal gearbox components, a rotary HOP-up unit and a 6.03mm stainless steel tightbore inner barrel to provide the accuracy to deal with opponents at long range.

The pre-installed MOSFET also offers programmable fire modes, including burst modes of various durations, progressive trigger, binary trigger, and binary with ramping full-auto. Also available are 7 pre-cocking adjustments, 8 active braking options, 5 trigger sensitivity settings and 5 trigger reset distance options. This solid gearbox setup is driven by a 25K high-torque motor, providing a super-snappy trigger response and enough torque to cope with stronger springs. If you're looking for a flawlessly built replica of Russia's latest SMG, the ARCTURUS PP-19-01 Vityaz ZTAC SP1 CQB AEG w/Optical MOSFET is one of the best options out there!

The bringer of death makes an unexpected return! The OBIRE 2.0 Advanced PCC AEG marries dynamic, brooding styling with hand-tuned high-end internals, assembled with care by some of the most talented technicians in the industry. The proven pedigree of Bolster Armouries continues to amaze both end users and those downrange, landing consistent hits at 60 meters and beyond with an incredible rate of fire of 28 rounds per second. While the bar to entry is high financially, the performance you'll experience with a Bolster Armouries at your side is second to none.

Working with the SigAir MPX AEG as a starting point with the ultra-slick 3-Gun style Task Force Carbine Kit and Genuine MFT Battlelink Minimalist stock added, the OBIRE 2.0 has been externally and internally overhauled in true Bolster Armouries tradition. Almost none of the original internal parts remain inside; everything found to be suboptimal has been ripped out and replaced with high-end aftermarket parts from Gate Electronics, Laylax/Prometheus, RetroArms, Warhead Industries, Maple Leaf and FPS Softair. All parts are chosen after an extensive R&D process and tuned to perfection by the exacting techs of Bolster Armouries who simply cannot let anything less than perfection leave the workbench.

Standing on the shoulders of Airsoft giants such as the highly successful Bolster Armouries ONYX, ARKOSE, ATLAS, AEGIS and the original OBIRE AEGs, each OBIRE 2.0 platform is hand-assembled by the truly talented and dedicated Bolster Armouries technicians and tuned to perfection, providing the absolute pinnacle of Airsoft gun performance straight out of the box.

The Bolster Armouries dedicated after-sales service package supplied with each Bolster AEG has you covered for 24 months from the date of purchase, meaning the incredible performance standard set by the OBIRE 2.0 when you take your first shot is guaranteed to be maintained in the long term. If you are interested in the second generation of the slickest and quickest Bolster Armouries platform yet, the OBIRE 2.0 is ready whenever you are!

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself. Our VMP-1X SMGs have now arrived and are ready for dispatch, no need to hold your breath any longer!

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself. Our VMP-1X SMGs have now arrived and are ready for dispatch, no need to hold your breath any longer!

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself. Our VMP-1X SMGs have now arrived and are ready for dispatch, no need to hold your breath any longer!

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

The VMP-1 platform is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1 makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor mounting system built into the muzzle itself.

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1 is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

The VMP-1 platform is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1 makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor mounting system built into the muzzle itself.

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1 is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

The VMP-1 platform is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1 makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor mounting system built into the muzzle itself.

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1 is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

A compact, lightweight and extremely awesome Gas Blowback Airsoft Submachine Gun, which is the perfect tool for dominating CQB and other tight arenas, as well as a backup to a Primary Gun (such as a Sniper Rifle). If you need a pocket rocket that can splurge a 42rnd Magazine in literal seconds, then the HFC HG-203 Submachine Gun is exactly that.

If you have dreams of a lightweight and compact SMG that shoots like a minigun, allow us to introduce you to the Novritsch SSR9 DSG. This phenomenal new AR-9 platform boasts an agile build combining a CNC aluminium handguard and high density polymer receiver and is rocking what is known as a Dual Sector Gear which effectively doubles the rate of fire to a phenomenal 36 rounds per second. This is the same RoF as the WELL PRO WE23-S Minigun; an incredible feat for such an affordable platform with only 1 barrel.

Speed is not the only trick up the SSR9's sleeve. The HOP-up unit is the rotary type with a numerically marked adjustment dial, kitted out with a Maple Leaf Macaron HOP-up bucking and 6.03mm tightbore inner barrel. Despite its short length and CQB optimisation, the SSR9 DSG is no slouch when it comes to long-range performance. If you like to move fast and need an AEG that can keep up, the Novritsch SSR9 DSG certainly can!

The AGM MP40 AEG brings one of the early Twentieth Century's most iconic and infamous machine pistols onto the Airsoft market. If you are looking for an SMG for WW2 reenactment, you can't beat an MP40, whether you are running a Wehrmacht loadout, resistance fighter or allied loadout, the MP40 has found its way into the hands of many unlikely users as a battlefield pickup weapon and is still used today in conflict zones around the world by various rebel groups.

AGM's MP40 boasts full metal construction, offering a realistically hefty build to satisfy those who want the most true-to-life experience when skirmishing. Internally, the MP40 makes use of a modified version 3 gearbox, meaning upgraded gears and cylinder groups are a go for performance seekers. Whether you are working on your WW2 loadout or you want an interesting and rarely seen primary for walk-on skirmishes, the AGM MP40 is ideal for the job.

The AGM MP40 AEG brings one of the early Twentieth Century's most iconic and infamous machine pistols onto the Airsoft market. If you are looking for an SMG for WW2 reenactment, you can't beat an MP40, whether you are running a Wehrmacht loadout, resistance fighter or allied loadout, the MP40 has found its way into the hands of many unlikely users as a battlefield pickup weapon and is still used today in conflict zones around the world by various rebel groups.

AGM's MP40 boasts full metal construction, offering a realistically hefty build to satisfy those who want the most true-to-life experience when skirmishing. Internally, the MP40 makes use of a modified version 3 gearbox, meaning upgraded gears and cylinder groups are a go for performance seekers. Whether you are working on your WW2 loadout or you want an interesting and rarely seen primary for walk-on skirmishes, the AGM MP40 is ideal for the job.

If you have been keeping an eye out for a submachine gun with a modern twist, you can give those peepers a rest, you have found it! Introducing the Double Eagle UTR45, a fresh new SMG with a fresh look, combining the AR15's familiar and comfortable fire controls with SMG.45 style magazines and an advanced multi-position side folding stock. The UTR45 isn't just about those jaw-dropping looks, it also sports the ultra-flexible Double Eagle FALCON fire control system within, together with a 6.1mm "air cushion" inner barrel to provide impressive stability and accuracy.

If you have been keeping an eye out for a submachine gun with a modern twist, you can give those peepers a rest, you have found it! Introducing the Double Eagle UTR45, a fresh new SMG with a fresh look, combining the AR15's familiar and comfortable fire controls with SMG.45 style magazines and an advanced multi-position side folding stock. The UTR45 isn't just about those jaw-dropping looks, it also sports the ultra-flexible Double Eagle FALCON fire control system within, together with a 6.1mm "air cushion" inner barrel to provide impressive stability and accuracy.

A compact and lightweight submachine gun, perfect for CQB sites or as an introductory weapon, with an instantly recognisable design, as well as rails on the top and sides for additional customisation options.

If you love a piece of history, you'll love the AGM STEN MK II AEG SMG! This full metal STEN gun replica is based on the real steel STEN MK II, the most commonly produced variant of this legendary British SMG. Constructed almost entirely from steel with all the details a true STEN fan would expect, the AGM STEN is internally equipped with a version 7 gearbox and fixed HOP-up optimised for 0.25g BBs, giving you a simple and reliable platform, just like the real deal.

Whether you're looking for a base gun for a post-apocalypse build or a STEN for your WW2 OSS, French Resistance or British Army loadout, the AGM STEN MK II is a fantastic choice for a superb price!

Looking for a sneaky SMG? The CYMA CM.041 SD6 is a full metal version of the sneaky SMG-5 we all know and love which has been upgraded with CYMA's BLUE Edition internals, making it as rock solid on the inside as it is externally. All of the internal upgrades are focused on reduced friction and lower stress, meaning the BLUE Edition CM.041 SD6 should provide a lifetime of superb performance and is fully compatible with aftermarket upgrades for those who want a bit more. As it comes, the rate of fire and trigger response is spectacular for an AEG without a MOSFET and is a significant step up from other SMG-5 SD6 AEGs on the market.

The real-world version of this submachine gun has been used by US Navy SEALs and UKSF in various special applications and has an iconic look which simply cannot be imitated, as much as the M4 platform tries to (Honey badger *cough*). If you want an SMG which is milsim appropriate with a plethora of internal enhancements built right in, the CM.041 SD6 would be a great tool for the task.

An Airsoft Electric Pistol replica of the MAC-10 Sub Machine Gun, which comes included with a Battery & EU Pin Charger, as well as the proprietary suppressor which this SMG is rarely seen without.

If you're in the market for what is probably the most iconic SMG design the world has ever known but you want it cheap, the Jing Gong JG069 SMG-5J SMG AEG should suit you perfectly. This SMG-5 AEG replicates one of the most modern SMG-5 variants, the "J" model first issued to the Japanese Armed Police, and is constructed predominantly from high density polymer to keep the build light, agile and affordable.

Internally, the JG069 is based on the Tokyo Marui SMG-5 A5, meaning full compatibility with aftermarket upgrades for its basic yet functional alloy version 2 gearbox. All of the iconic SMG-5 details are present externally, including its claw-mount compatible receiver, tri-lug muzzle device and ambidextrous fire controls. If you need an SMG-5 in lightweight and cost-effective form, the Jing Gong JG069 SMG-5J SMG AEG is exactly that!