All External Airsoft Parts & Attachments

An Aluminium constructed Buffer Tube for Airsoft Electric M4/M15/M16 replicas, which allows you to install a telescopic stock to have greater control over the length of the rifle.

A mock suppressor designed to replace the standard flash hiders on Airsoft replica weapons, by using the same 14mm counter clockwise outer barrel threads, and features zombie hunter insignia. 

Whether you want to give your AEG a more elite look or you need space for a battery the Big Dragon AN/PEQ-15 Dummy Battery Box will do the trick! This dummy PEQ-15 unit is designed to look exactly like the real thing and has enough space inside to fit a battery measuring approximately 6.5x4.5cm. Included in the set is a set of realistic laser warning stickers for a more realistic look, with various colour schemes available so you can pick your favourite. This battery box mounts to 20mm Picatinny rails and is great for a front-wired AEG setup with limited space inside the handguard.

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable. 

A steel-constructed sling plate designed to fit on Airsoft M4/15/16 AEG (Electric) Receiver.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

A Polymer constructed stock which is tough, made from dense materials and is reminiscent of the Amoeba stock due to the easy access spring-loaded door which gives access to the battery compartment.

A 20mm Railed MK18 Handguard for AR Platform AEGs and GBB replicas, which is ideal for those searching for the 'Special Forces' look. It is constructed to a lovely standard from Aluminium and features Numbered Rail Slots for the precise placement of accessories. The bottom Rail measures a total of 21.3cm, and the other three at 24.4cm. If you're looking to spice up your AR with some external furniture, then a Handguard swap is a great place to start.

If you're interested in going sneaky on the cheap, the Big Dragon 135x34mm Dummy Suppressor; 14mm CCW & CW should suit your needs. This aluminium dummy suppressor is equipped with 14mm CCW threading at one end and 14mm CW threading at the other, meaning it can be used on both common CCW barrels and awkward CW barrels. 

Featuring a foam internal filling stabilised with a steel spring, the Dummy Suppressor should slightly muffle the muzzle report of your AEG or GBB, though its main purpose is to provide sneaky looks. Weighing in at 117 grams approximately, this suppressor is ideal for AEG and GBB rifles but can still be used on GBB pistols, potentially with a slight reduction in gas efficiency. 

A Quick Release Sling Loop for QD Sling Sockets, allowing you to install a Sling Loop that can be quickly released at the press of a button. This makes it ideal for handing your replica over for Chrono, or if you have multiple guns with QD sockets you can switch primaries in a hurry without taking your sling off!

If you need sling swivels, these might work! The Big Dragon Harris-style Sling/Bipod Lugs with Swivels include a pair of Harris-style sling/bipod lugs with self-tapping screw tips and a pair of sling swivels for Harris lugs. The included lugs are ideally used in real wood stocks and will require holes to be drilled for installation. Remember, measure twice and cut once!

The swivels themselves are compatible with pre-installed Harris lugs found on VSR-10, L96, M24 and M40 sniper rifles. If you have one of these rifles with harris lugs pre-installed, simply attach the swivels using the included pins and stash the included lugs away for a future project! Whether you want swivels for your existing lugs or you need harris-style lugs for your real wood-stocked Air Rifle or Airsoft gun, this set is ideal!

A four pack of Keymod compatible Rail covers, designed to give the user a firmer grip on their Rifle during use. The rail panels are constructed from Rubber and are 15cm in length. 

A 20mm mounted Russian tactical flashlight with an included pressure pad, designed to blind your enemies and provide you with the ultimate tactical illumination device to see you through your skirmish.

If you want to style up your M4/AR15 with some interesting small parts, starting with the fire selector isn't a bad shout! Introducing the Custom Safety Selector from Big Dragon, a stylish modern selector moulded from polymer, with an enlarged design and grooves for additional grip which guarantees you won't slip off the selector at a critical moment! This selector could be the icing on the cake that is your latest high-speed M4 build, and provides a vast improvement over standard M4/AR15 selector levers. 

If you run a GBBR M4/AR-15 and you want an easy way to improve your weapons handling, the Aluminium BAD lever for M4/AR-15 from Big Dragon is what you need! This device attaches to the bolt release catch on the left side of the receiver and allows you to drop the bolt after a reload without having to hit the ping pong paddle, instead you press this lever with your trigger finger. The BAD (Battery Assist Device) also allows you to lock the bolt to the rear without taking your hand off the pistol grip with a push upwards on the lever when the charging handle is pulled back.

AEG users need not feel left out; the BAD can still be mounted to your AEG, but more as an aesthetic touch to mimic real world customised ARs. Compatibility wise, this device may need modification or shimming for a tight fit on any specific platform, so we only recommend this part for experienced users.

Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.

Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.

A high quality replica suppressor for Airsoft weapons, complete with replacement 'Birdcage' type Flash Hider to attach onto.