All Novritsch

Are you in need of a replacement slide for your Novritsch non-blowback gas pistol? The Novritsch SSX23 Metal Slide is exactly what you need! It is identical to the stock pistol slide that comes with the SSX23, meaning it is easy to drop in and install as it is designed specifically for the pistol. It is constructed from aluminium, making it strong and lightweight, perfect for quick draws but without the risk of the slide cracking if its dropped.

The slide has fibre optic iron sights preinstalled on top of it, just like the stock pistol, it saves the hassle of having to find additional aftermarket iron sights! This replacement slide also features optics-ready functionality if you add aNovritsch SSX23 Red Dot Plate V2 or SSX23 Slide rail.

Replace your old damaged slide, or add the Novritsch SSX23 Metal Slide to a different non-blowback gas pistol from brands such as Tokyo Marui, Stti, KJW and ASG to reinvent their design and make your own unique pistol!

If you need a way to carry more kit in comfort, look no further than the Novritsch MOLLE Battle Belt 3.0! Styled after modern MOLLE battle belts, the Battle Belt 3.0 boasts the unique Novritsch laser-cut MOLLE style, allowing you to mount MOLLE pouches wherever you need them and match the styling of the ASPC and other Novritsch tactical gear perfectly.

The belt itself is padded for comfort with heavy loads and can be paired with the Novritsch Harness 3.0 to create a modern webbing belt solution, similar to old-school PLCE in feel but with all the advantages of modern MOLLE interfaces. Available in 3 different sizes and 7 colour options, the Novritsch MOLLE Battle Belt 3.0 is a fine solution regardless of your intended use or loadout style!

If you're looking for an SSP18 slide that features a stylish metallic finish, but still remains lightweight thanks to its aluminium construction, Novritsch has you covered. The Novritsch SSP18 CNC Slide is a superb way to make your Novritsch SSP18 stand out on the battlefield and turn heads with a flashy design!

The CNC top and side cuts help reduce weight, resulting in faster cycling speed, and give your pistol an ultra-modern look. Customisation is the name of the game with this slide, which allows you to craft an SSP18 unique to you, so your opponents will always remember who sent them back to the safe zone.

Modern Airsofters are always looking for a lightweight slide to improve on those all-important cycling speeds, but if you aren't willing to compromise your style with a polymer slide, an aluminium slide is what you want! The SSP18 features an incredibly low weight thanks to its CNC cuts and grooves, which also make your pistol stand out from the rest. The slide transforms your SSP18 from a simple and functional pistol to a custom and unique extension of yourself with forward-thinking and futuristic stylings.

If you're searching for a high-quality rifle scope to top off your sniper rifle, the Novritsch 3-9x50 Rifle Scope Mk2 w/Scope Rings is a fantastic choice. Constructed with an alloy monotube and glass lenses, this scope comes ready to mount, with a pair of 25mm scope rings for 20mm Picatinny rails included in the box, along with a microfibre cleaning cloth. 

As its name might suggest, 3-9x50 Rifle Scope Mk2 w/Scope Rings offers variable magnification between 3x and 9x, ideal for both spotting your target and engaging at Airsoft ranges. The objective lens boasts a whopping 50mm diameter, meaning you get a wider field of view than most comparable rifle scopes for an easier time tracking moving targets and the ability to see more around your crosshair. 

Windage, elevation, illumination and focus are all adjustable, allowing you to set the scope up precisely and tune the red or green illuminated reticle for your current ambient lighting conditions. If you're a sniper with your sights set on a beast of a rifle scope, the Novritsch 3-9x50 Rifle Scope Mk2 w/Scope Rings suits your needs perfectly!

If you're getting all ghillied up for skirmishing, why not do it all in one go? This is a complete set, including the Modular 3D Ghillie Suit Hood, Jacket and Pants, all in matching ACP camo!

ACP is a military-style camo based on Multicam and MTP patterns used by the US Army and British Army respectively. Designed to break up your outline in a wide range of environments, this pattern works well in less green woodlands and mixed outdoor urban environments. If you're running a military-style loadout and need a ghillie that suits, this is the one. 

The benefits of the Modular 3D Ghillie suit include its integrated design, allowing you to wear it all as one garment or run Hood, Jacket or Trousers alone. The Modular version of Novritsch's original ghillie suit is also compatible with the Novritsch LC1 Leaf Camouflage System for a more permanent alternative to natural foliage. 

Have you got some old gear in need of repair? The Novritsch Tactical Sewing Kit is exactly what you need to get started as a sewist and mend your clothing and accessories. This kit comes with a bit of everything to aid your repairs, threads, buttons, scissors, a thimble, needles, safety pins and Velcro strips.

With the Novritsch Tactical Sewing Kit, you can learn a new skill and make your old damaged kit look brand new again. It all comes supplied in a useful pouch that is Velcro-backed, so you can mount it straight onto your loadout. Its compact design also means you can store it in a pouch in case of any tactical accidents on the skirmish field.

Even if the sewing hobby doesn't stick, this pouch features plenty of useful pockets and elastic loops for storage. This kit is perfect for a DIY skirmisher, nothing feels quite as rewarding as fixing up your old kit and saving yourself the extra pennies of buying brand-new stuff.

The Novritsch SSP18/TP22 Extended Magazine Base is a CNC machined extended magbase for the TP22 magazine, Light G-series Mag (28 BBs) & the SSP18 Magazine V2. With this fancy upgrade, your mags can carry six more BBs and an extra 15% gas capacity. 

If you intend to use this with the TP22 magazine, you will need the SSP18 V2 Gas Magazine Inlet valve. If you want to make some of your pistol magazines look extra cool and stand out on the battlefield, you definitely need the Novritsch SSP18/TP22 Extended Magazine Base

As this is a very technical upgrade, we recommend you only try and fit it if you are confident in your abilities and understanding.

If you're rocking the remarkable Novritsch SSE18 AEP and want to stretch its legs, the SSE18 Minimalist Carbine Kit is a great way to do it. Constructed with a CNC aluminium chassis and a high-density polymer stock, this carbine kit transforms the SSE18 into a nifty little SMG and allows you to take full advantage of its impressive range. 

Like the Minimalist Carbine Kit for SSP18 GBB, this carbine kit is equipped with a 20mm Picatinny rail up top, ready for a red dot sight or scope, and a magnetic locking folding stock at the rear. Also present is a lug for the Novritsch Univeral Holster system machined into the left side. Given the low weight of the completed setup, we think the SSE18 in the Minimalist Carbine kit is a superb sidearm for a sniper; small enough that it won't slow you down if carried on a belt with full auto on tap to keep the enemy at pay if you get spotted!

The Air Brake Pin blocks the cylinder head before impact producing an air "cushion" for the piston. As a result, the impact is dampened and the gun is more quiet. Included are 4 different lengths: 20 mm, 23 mm, 26 mm and 29 mm. The longer the length, the more of an air cushion resulting in a quieter shot, but it also reduces the FPS due to more of the air in the piston being used to dampen the impact. AirBrake pins are installed onto the piston head to make shooting the SSG-10 rifles quieter. They are compatible with upgrade parts such as theNovritsch SSG10 Weight Adjustable Piston.

This is an advanced technical part, it is only recommended if you are confident in your upgrading abilities.

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you want to save some weight on your AR36 or Novritsch SSR63 and give it a whole new look, you have found what you need! The Novritsch Minimal 20mm Picatinny Rail Kit for SSR63/AR36 AEG is constructed from alloy with steel mounting bolts and is compatible with the full range of Novritsch SSR63 AEGs as well as most AR36 AEG and GBBR platforms. The part is manufactured by Double Bell, includes built-in flip-up iron sights and is based on the real steel KAC design. 

The set provides a 20mm Picatinny top rail measuring approximately 10cm in length, enough for most red dot sights and smaller magnified scopes while minimising excess material to keep the weight low. The built-in flip-up iron sights are fully adjustable, with a single rear aperture which can be raised and lowered by turning the drum just below the aperture and adjusted left and right via the drum on the right side. If your AR36 needs a style up or you want to lean in to the light and tight design philosophy of the Novritsch SSR63, this kit is the perfect upgrade!

If you have the Novritsch SSR63 A2 or A3 and it is a bit long for your playstyle, this is what you need to shorten her up a bit! The Novritsch Short Conversion Kit for SSR63 A2/A3 AEG includes a "C" length outer barrel with 14mm CCW male threads at the tip, a 6.03mm tightbore inner barrel and a CNC aluminium M-LOK handguard with 20mm Picatinny rail sections in key locations. 

This set includes everything you need to transform your SSR63 A2 or A3 into the short configuration, shaving a few precious inches off the barrel so you can clear corners more effectively and have better mobility in CQB scenarios. Whether you want to hot-swap your SSR63 A2/A3 for the odd CQB game or you prefer a shorter primary to maximise aggression, this kit should suit you perfectly!

If you're in search of a robust red dot sight with a military-style look, the Red Dot Sight V5 from Novritsch is the way to go. Based on a well-known real steel "holographic" style sight, the Red Dot Sight V5 offers an illuminated ringed cross reticule which glows either green or red depending on your selection and is fully adjustable for windage and elevation.

The Red Dot Sight V5 is designed with a strong aluminium hood protecting the screen from bumps and scrapes, making it ideal for fast-moving skirmishers. The Red Dot Sight V5 is ready to mount via its integral 20mm Picatinny mount and sits at the same height as a standard M4/AR-15 front sight, making it comfortable to view through on basically any Airsoft platform, though if you use a full face mask, you may need a rail riser. If you need a strong red dot sight design with a militant aesthetic, the Novritsch Red Dot Sight V5 is ideal!

If you're running the Novritsch Red Dot Sight V2 but want to see further, the Novritsch 3x Optic Magnifier with Flip-to-Side Mount is what you need! This flip-to-side magnifier offers 3x magnification, making distant targets easy to spot and allowing you to turn your RDS into a long-range optic and flip back to close range instantly via the flip-to-side mount. 

The mount is ready to rock on any 20mm Picatinny rail and offers standard M4/AR-15 height over bore, matching the optical centreline of most red dot sights but ideally used with the Novritsch Red Dot Sight V2. Windage and elevation adjustment dials are present on the left side and top respectively. At the rear, we have a focus adjustment dial so you can adjust to get the clearest image of your target and reticle. If you operate in a mixed environment and often need to handle both close and long-range threats, the Novritsch 3x Optic Magnifier with Flip-to-Side Mount belongs on your primary!

If you're searching for your first Airsoft sidearm and want it to be a real killer, the Novritsch SSP1 CO2 Hi-Capa GBB Pistol; Pre Two-Tone is exactly that. Boasting full metal construction with the unique Novritsch external aesthetic, the SSP1 is also thoroughly pre-upgraded on the inside, giving it a longer lifespan and significantly improved performance when compared to the average GBB pistol. 

Inside, you'll find a 6.03mm tightbore inner barrel paired with the impressive Novritsch Purple HOP-up bucking housed in an alloy HOP-up unit, providing exceptional accuracy and range for a pistol and allowing heavier BBs to be used for further long range performance. 

All of the hammer group components are constructed from steel, giving you a massive reliability advantage and seeing to known weak points in other GBB sidearms. The loading nozzle is reinforced in key places to extend the SSP1's lifespan and the magazine has been enhanced with the Novritsch gas route bucking, providing a tighter seal with the nozzle for improvements in shot-to-shot consistency and reduced gas wastage. 

Being finished in Pre-two tone blue, this version of the SSP1 is ideal for those who don't yet have a UKARA membership or other VCRA defence, or those who appreciate an eye-catching sidearm with a stylish look. In its CO2-powered form, the SSP1 is a bit too hot FPS-wise for skirmish use during the summer, but throw a Novritsch 30rnd Magazine for Hi-Capa GBB Pistols; V3 in there and you'll get around 320 FPS +/- 10% on 0.2g BBs, ideal for skirmishing at any site in the country. Keep your CO2 mag handy though, it will really come into its own during the winter months when everyone else's sidearm is gassing out! 

The original Novritsch sniper rifle, the SSG24 has been around since 2017 and its success is what brought us the wonderful selection of Novritsch platforms that we have available today. This is the last chance for sniper fans to get their hands on the sniper rifle that started it all, with only limited stock available, get your hands on a piece of history before its too late!

This SSG24 is an M24 platform decked out to the nines, taking the original shell but installing state-of-the-art internal parts, meaning this rifle needs no further tuning or modifications, it's already a beast. It is a no-compromise rework of the OG sniper rifle that we all fell in love with Novritsch because of.

Sporting a 6.01 precision tightbore barrel for pinpoint accuracy and a satisfying pop with every shot, this sniper is crafted to perfection, with a suave alloy fluted outer barrel and superbly textured lightweight glass fibre reinforced polymer body, finished with a comfortable rubberised butt plate for a sniper that shoots and handles like an absolute dream.

This is a set of spare O-rings for Novritsch SP1, SSP2 & SSP5 V2 magazines. They are the perfect replacement parts for magazines that are leaking gas. Become a maintenance master and fix your leaky mags, rather than spending extra on new ones. Should your magazine spring a leak, a spare set of O-Rings is always handy.

Fix your Novritsch magazines so they're skirmish-ready, or have some spare parts should the worst scenario occur. The Novritsch SSP2 O-Ring Set gives your magazines a second chance at fighting!

If you're looking for a more secure way to keep your trousers in place then the Novritsch Heavy Duty Belt Buckle is exactly what you need! This aluminium alloy-constructed buckle is designed for 5cm belt webbing, such as the Battle Belt 4.0 and 3.0. Polymer belt buckles are old news, metal buckles are much more secure, durable and stylish. 

If you have a damaged buckle or fancy an upgrade from plastic to metal, then the Novritsch Heavy Duty Belt Buckle is perfect for you. Just make sure your belt has 5cm webbing and will fit in the buckle! Keep your trousers where they're supposed to be whilst on the battlefield and save yourself the embarrassment of being caught with your pants around your ankles, literally...

If you're in search of a robust red dot with a menacing, militant aesthetic, you can't go wrong with the Novritsch Red Dot Sight V7 with Lens Protector! A detailed replica of the iconic holographic sight made popular by video games, TV shows and movies, the Red Dot Sight V7 comes with a Lexan BB Shield in the set, making it strong enough to withstand point-blank BB impacts at up to 1.5 joules!

Equipped with side controls for ease of use with a magnifier or rear-mounted night vision device, the Red Dot Sight V7 comes with a 20mm Picatinny QD rail mount pre-installed, making it easy to mount and equally easy to switch between platforms when you fancy a change. Functionality-wise, this red dot is fully adjustable for windage and elevation and boasts 5 brightness settings for both the green and red reticle colour options.

The highly functional holographic-style ringed dot reticle allows you to take precise shots with the central dot or snap shoot up close using the outer ring. If you're working on a military-style build and need a robust red dot sight to match, the Novritsch Red Dot Sight V7 with Lens Protector is ideal!

If you're getting geared up to run HPA, the Novritsch HPA Regulator & Line; US Spec should be useful! This set includes a regulator and air line with the US Spec fitting, ideal for use with Novritsch HPA adapters or other US Spec adapters. The set does not include a bottle, so make sure you grab one if you don't already have one!

The Novritsch HPA Regulator & Line; US Spec boasts a two-piece design, allowing easy access for maintenance and includes only two O-rings inside to minimise potential failure points, increasing long-term reliability. The integral tournament lock allows you to lock off your regulator to keep the pressure constant and within site limits using a standard zip tie, keeping site marshalls happy. If this is your first foray into HPA, we recommend reading the "Special Instructions" section of the full product description before ordering.

This line and reg set is compatible with both standard and SLP (super low pressure) HPA tanks but only works with US Spec adapters and bottles, not EU spec. If you're about to grab yourself a Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa or EU-Series, this is the line and reg you need!

If you're getting all ghillied up for skirmishing, why not do it all in one go? This is a complete set, including the Modular 3D Ghillie Suit Hood, Jacket and Pants, all in matching Kreuzotter camo!

Kreuzotter was developed in-house by ex-military experts in the Novrtisch Textile Team, combining the popular Tiger Stripe camo shapes with European woodland-friendly colouration. The pattern includes 10 different colour tones inspired by forest environments, omitting black to avoid unnatural colours.

The benefits of the Modular 3D Ghillie suit include its integrated design, allowing you to wear it all as one garment or run Hood, Jacket or Trousers alone. The Modular version of Novritsch's original ghillie suit is also compatible with the Novritsch LC1 Leaf Camouflage System for a more permanent alternative to natural foliage. 

The Novritsch Hi-Capa thread adapter is exactly what you need for mounting barrel attachments to your trusty Hi-Capa Airsoft pistols. The adapter features 12mm CCW threading on one side and 14mm CCW on the other. The 12mm threading screws into your Hi-Capas outer barrel and the 14mm threading is then ready for most common muzzle devices, suppressors or tracer units.

Customise your Hi-Capas look or improve its performance in-game using the Novritsch Hi-Capa Thread Adapter to mount your preferred muzzle device.

If you love your SSP18 and want to keep it shooting in the long term, having a Novritsch SSP18 Complete Nozzle can't hurt! This polymer loading nozzle is compatible with Novritsch SSP18 GBB pistols and is a fantastic part to have lying around to pre-empt potential disaster, especially if you use full auto a lot. If you're very attached to your SSP18 and don't ever want it to sit around awaiting spare parts, grab this to put your mind at ease!

If you want your SSG24 to be more sneaky or you want to light the enemy up with a tracer unit, this thread adapter will do the trick! The 14mm CCW Suppressor Thread Adapter for SSG24 is constructed from CNC machined aluminium and replaces the front barrel cap on the Novritsch SSG24, providing 14mm CCW male barrel threads. These are the most common barrel threads used on Airsoft rifles, so with this adapter installed you have all the options in the world when it comes to customising your SSG24 and making it truly yours.

The Novritsch 28rnd Full Thrust Magazine for SSG10 Sniper Rifles is designed to hold exclusively 6.44mm BBs. It does not hold regular 6mm BBs. It is constructed from a translucent polymer which is perfect for quickly checking how much ammo you have remaining before a reload is due. This magazine can only be filled with a Novritsch Full Thrust BB Magazine Speed Loader as no other speed loader can hold 6.44mm BBs.

The magazine is single-stacked and holds 28 Full Thrust BBs. This may seem like a small amount, but for a talented marksman, this is more than enough to dominate the skirmish field. 

If you need somewhere to stash your sniper rifle magazines, Novritsch has what you need! The Full Seal MOLLE Pouch for SSG10 Magazines holds a single VSR-10, SSG10 or SSG10 Full Thrust magazine and is a full seal design which keeps your magazine secure during energetic movement while preventing dirt and debris from getting inside. 

The pouch mounts to MOLLE webbing found on chest rigs, plate carriers, tactical vests, belts and backpacks and can be positioned wherever you like, as long as you can reach it when needed!