ASG Airsoft

If you like the CQR look and have a sneaky playstyle this bundle should suit you well! The ASG HERA ARMS Covert OPS Pack comprises the impressive ASG HERA ARMS CQR AR-15 Milspec SSS Edition Rifle, the ASG B&T Rotex-V Mock Suppressor, a Theta Optics Spider Red Dot and two 140rnd NUPROL Mid-Cap Magazines. All you need to get shooting with the CQR is your choice of battery, charger and eye protection!

A replacement Trigger for the Scorpion Evo, which is designed to be dropped into the gun and decrease the amount of travel time in the trigger, allowing for faster repeat shots. 

A pair of 20mm RIS compatible raised scope mount rings, designed to raise up optics to the user's eye-level, or fit larger scopes onto their Airsoft guns. 

A stiff but flexible molded Retention Holster for the ASG Shadow 2 Gas Blowback Airsoft Pistol. This Holster will attach over your belt to securely hold the Shadow 2 on your hip, not releasing it until you press the Release Button on the side of the Holster.

An upgrade or replacement spring guide for Version 2 gearboxes.

*Please note this item has been updated by ASG and now comes in black rather than silver

A magazine for the VFC McMillian M40A3 6mm BB Spring Action Sniper Rifle and holds up to 20 BBs at a time.

A complete drop-in Furniture Kit for ASG's Scorpion Evo, which features a custom M-LOK Railed Handguard, ATEK Universal Front Grip and ATEK High-Cap Magwell. This kit will not only massively improve the ergonomics and handling of your Scorpion Evo, but will make it stand out from the crowd.

A Glass Nylon Fiber constructed Magwell adapter for the ASG Scorpion Evo, which serves as a reference point for your lead hand, and makes guiding a fresh Magazine into the Magwell much easier to perform from memory, allowing you to focus your attention solely on the battlefield where it belongs.

A vital spare for Version 3 gearboxes.

A Scope Mount designed for Airsoft Sights and Scopes which offsets Sights and Scopes allowing their Eye relief to be adjusted even with minimal rail space. 

A compact LiPo Airsoft Battery, designed to be used in tight awkward spaces, without compromising on overall capacity. 

A custom made Handguard for the ASG Scorpion Evo, which is made of the same solid Glass Nylon Fiber as the original furniture and has been designed with comfort and ergonomics in mind; allowing users to effortless achieve a repeatable C-Clamp on the fore-end for consistent aiming.

If you're a fan of high-end real steel pistols favoured by competition shooters, the CZ Shadow 2 must be on your radar. This version of the ASG CZ Shadow 2 CO2 GBB Pistol is the Orange Special Edition, meaning we are treated to CNC aluminium grips and an enlarged magazine release finished in eye-catching metallic orange, along with several internal improvements and tighter tolerances across the design.

The real steel Shadow 2 sits side by side with the best 2011/Hi-capa platforms as the pistol of choice for those focussed on accuracy, particularly IPSC and other competition shooters. Famed for its fantastic trigger, superb ergonomics and excellent accuracy, the Shadow 2 is a lesser-seen platform in Airsoft terms, reserved for the elite who appreciate a classy full metal sidearm with a lofty real steel pedigree.

Innumerable improvements are present in this Special Edition variant of the ASG Shadow 2, including a fixed outer barrel with barrel spacers, a stainless steel recoil spring plug for reduced friction and tightened tolerances between the slide and frame for a smoother overall feel. The result is an incredibly accurate platform for a sidearm despite its ferocious recoil from its CO2 power source, ideally suited to competitive shooters and classy skirmishers with tastes for the finer things in life!

If you have heard the legend of the ASG Scorpion EVO or had an EVO owner run rings around you at a skirmish, this should get you excited! ASG has announced its H-15 AEG series, an M4/AR-15 platform with a pre-installed MOSFET, rotary HOP-up unit, and a unique external aesthetic. 

The H-15 carries through the absolutely unbeatable build quality of the EVO into the ever-popular M4/AR-15 shape. This is the H-15 B.E.T, designed for the sneaky players, boasting an integral suppressor (known as the Barrel Extension Tube by ASG) for that stealthy aesthetic. Unlike many other integrally suppressed designs, the M-Rail handguard installed on the H-15 BET allows for the foremost M-LOK slots to be used to mount accessories thanks to its enlarged design, meaning no compromises and maximum customisation options. 

A replacement / spare for stock or damaged bearing in Version 6 (V6) and Version 7 (V7) Gearbox. In gearbox spring guides are designed to help the spring in its correct position. 

A High Capacity Magazine designed and built for the ASG CZ 805 Bren A1 Series of Airsoft 6mm AEG Rifles. The magazine is constructed from Polymer, with a Polymer Shell and Internals. 

Introducing the ASG H-15 AEG series, an M4/AR-15 platform with a pre-installed MOSFET, rotary HOP-up unit, and a unique external aesthetic. 

This could be the ultimate M4 platform AEG, carrying through the absolutely unbeatable build quality of the EVO into the ever-popular M4/AR-15 shape. The pistol grip is provided by PTS Syndicate and is a beautiful ergonomic design well-suited to modern shooting stances, known as the EPG-C. The stock is a real steel HERA Arms CCS stock, boasting unbeatable build quality and a uniquely contemporary design which has yet to be replicated. 

This, the Carbine version, is perfect for those who want to customise their setup, boasting M-LOK slots across the handguard, a lengthy receiver rail and a 14mm CCW male threaded barrel, ready for your choice of muzzle device and with the perfect barrel length for both indoors and outdoors skirmishes!

If you need spare magazines for your ASG CZ Shadow 2 Orange Edition, this is the one! The 26rnd CO2 Magazine for ASG CZ Shadow; Orange Edition is compatible with the ASG Shadow 2, SP-01 and B&T USW but thanks to its pre-installed CNC Aluminium baseplate finished in eye-catching orange, is ideal for the ASG CZ Shadow 2 Orange Edition. 

This CO2 magazine is loaded just like any other GBB magazine, either through the feed lips at the top of the magazine or by pulling the follower at the front down and loading through the widened section of the follower channel. We recommend using a speed loader to avoid sore thumbs! Loading a 12g Unthreaded CO2 bulb is equally simple; remove the baseplate and CO2 plug, insert the capsule with the piercing surface facing upwards and tighten the CO2 plug using the included Allen key. With this done, reinstall your baseplate and you're ready to rock!

A new design of Airsoft 6mm Dan Wesson revolver cartridges from ASG with a deep grove cut out at the rear.

A low capacity AR36 magazine from ASG, with a transparent Polymer casing and dummy rounds which can be seen through the case.

If your CZ 805 is looking a bit battered, now may be the time to fix 'er up! The ASG Replacement Receiver Stock Hinge is a replacement original part for the ASG CZ 805 BREN AEG and is the part you need if your stock no longer locks into the deployed position. This is the receiver side of the stock mechanism and is constructed from high density polymer.

If you have heard the legend of the ASG Scorpion EVO or had an EVO owner run rings around you at a skirmish, this should get you excited! ASG has announced its H-15 AEG series, an M4/AR-15 platform with a pre-installed MOSFET, rotary HOP-up unit, and a unique external aesthetic. 

This could be the ultimate M4 platform AEG, carrying through the absolutely unbeatable build quality of the EVO into the ever-popular M4/AR-15 shape. This is the H-15 CQB variant, rocking an ultra-short 7-inch outer barrel and equally compact M-Rail handguard. The H-15 CQB leans into the inherent ultra-snappy trigger response provided by the pre-installed ETU, and the result is a rock-solid, lightweight and agile close-quarters platform ideal for the CQB specialist. 

If you are shooting so much you are emptying your bank account as fast as you empty your magazine, more affordable BBs are the key to keeping up the habit. Often, with affordability comes compromise, but not with ASG's Q Blaster BBs! These 6mm Airsoft BBs are supplied in a resealable bottle containing 3300 BBs approximately and are polished and coated for smooth reliable feeding. These are the 0.20G variety, perfect for the average AEG, shotgun or GBB pistol and especially good for CQB where the extra projectile speed of a lighter BB can be a huge benefit when engaging moving targets. 

Tolerance is slightly wider than Blaster Devils but still minuscule, promising +/- 0.03mm variance at the absolute maximum. These BBs would be great for CQB use and use in platforms which won't need the extra precision of Blaster Devils to show the enemy who is boss! 

A Standard powered Airsoft Battery, designed to be used in almost all Airsoft AEG weapons with a mini-Tamiya connector, providing the perfect amount of power for most Airsoft Weapons. 

A screw-top bottle that contains 3300 high quality, competition-grade 0.28g BBs from ASG, which are carefully selected to make the cut for the 'Devil' series - a premium range compared to the standard Blasters. They are made with a fine Tolerance of 0.01mm to ensure optimal performance in all Airsoft Guns. The 0.28g BBs are a great option for those playing outdoors, particularly if you have a gun with a strong HOP unit and want to keep overall BB costs down whilst maintaining top-tier performance.

If you are shooting so much you are emptying your bank account as fast as you empty your magazine, more affordable BBs are the key to keeping up the habit. Often, with affordability comes compromise, but not with ASG's Q Blaster BBs! These 6mm Airsoft BBs are supplied in a resealable bottle containing 3300 BBs approximately and are polished and coated for smooth reliable feeding. These are the 0.28G variety, perfect for outdoor skirmishes where you may need improved foliage penetration, wind resistance and consistency at long range.

Tolerance is slightly wider than Blaster Devils but still minuscule, promising +/- 0.03mm variance at the absolute maximum. These BBs would be great for a thrifty Airsofter with a long range leaning, and absolutely ideal for an LMG which may need to put down some serious volume of fire at longer ranges than average.

High quality 0.20g tracer BBs which when illuminated glow green in the dark, allowing Airsofters to witness where their shots are going, perfect for CQB.

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

The BBs everyone has been waiting for! A White Airsoft Sniper 6mm BB pellet that also works!

Small and compact Airsoft BB magazine speedloader that comes with a pistol magazine adaptor.