- Bluetooth connectivity built-in
- Pre-wired to Deans connector
- Fits V3 GB AEGs & Single/Dual-solenoid HPA engines
If you're searching for an advanced MOSFET for your version 3 gearbox-equipped AEG, the ASTER II Bluetooth® MOSFET for Version 3 Gearbox from Gate Electronics is ideal. A cutting edge advancement over the original Gate ASTER MOSFET, the ASTER II boasts several quality of life improvements, more customisation options than ever before and Bluetooth 5.2 connectivity built-in, allowing you to change settings wirelessly on your smartphone or mobile device.
The ASTER II electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App. Other programmable options include adjustable pre-cocking and adjustable active braking; perfect for the techy types to set their primary up to suit practically any build objective.
The ASTER II is compatible with any version 3 gearbox-equipped AEG and can also be used with the Gate PULSAR Single or Dual-Solenoid HPA Engines if you add the ASTER II-specific HPA cable for the appropriate engine type. If you're ready to turn your Airsoft gun into a Space Gun, the Gate ASTER II Bluetooth® MOSFET for Version 3 Gearbox is calling your name!
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
Transform your AEG by replacing the trigger contacts with the ASTER II Bluetooth® ETU/MOSFET from Gate Electronics! A computerised controller equipped with innovative optical sensors, including a proximity trigger sensor which offers an incredible 250 sensitivity settings, the ASTER II is the updated version of the original Gate ASTER, widely regarded as one of the best value ETU modules on the market.
The GATE ASTER II Bluetooth® offers a unique opportunity to gain a tactical advantage thanks to an extremely fast trigger response, a whopping 343 different fire mode combinations, adjustable pre-cocking, adjustable active breaking and much, much more! One of the main differences between the ASTER II and the original is its built-in Bluetooth 5.2 connectivity, allowing you to adjust your settings using the versatile Gate Control Station app without the need for a BlueLink dongle or USB link. Midway through a game day and fancy running burst instead of full auto? Whip your phone out and you can set your ASTER II up to suit your needs in seconds!
The ASTER II's smart fuse protects your AEG’s battery, motor, and the controller itself, even in case of reverse battery connection. This feature, along with the optical sensors and multi-layer PCB with EMC shield, makes the ASTER II Bluetooth the most durable drop-in unit on the market. You choose how to configure the ASTER™ simply via the trigger or through the Gate Control Station app, thanks to its built-in Bluetooth 5.2 connectivity!
As with other ETU/MOSFET systems, you will need a certain amount of expertise to properly install the ASTER II without damaging its delicate optical sensors. We recommend consulting a tech unless you are very confident you can install the ASTER II properly, as we cannot offer returns on parts damaged during installation.
Compatibility-wise, this version of the ASTER II is designed for version 3 gearbox AEGs and can also be used with single or dual-solenoid HPA engines with the addition of the appropriate cable (available separately).
If your AEG could use advanced functionality, a wide range of options for fire selector modes, improved electrical efficiency and Bluetooth connectivity, the Gate ASTER II Bluetooth® MOSFET for Version 3 Gearbox ticks all the boxes. Ready to run on any AEG with a version 3 gearbox and compatible with Gate's Pulsar HPA engines with the addition of the HPA Cable, this ETU is as adaptable as it is advanced!
Features
- Compatible with Version 3 gearboxes & Gate Single or Dual-solenoid HPA engines
- Specific HPA Cable required for HPA use - Available separately
- Bluetooth 5.2 Connectivity built-in - Connect to the Gate Control Station App to configure your settings!
- Improves electrical efficiency - Higher rate of fire and faster trigger response
- Provides 250 trigger sensitivity adjustment settings - From hair-trigger to realistic full pull
- 343 Fire selector mode combinations - Burst, binary, semi-only, etc. We aren't going to list them all here!
- Adjustable active braking - Set "Adaptive active braking" or set from 1% to 100%
- Adjustable pre-cocking - Choose from 5 levels to enhance semi-auto response rate
- The optical gear cam sensor supports all types of gears: Infinite Torque-up, DSG, SSG, 19-tooth, and standard
- Multi-layer PCB with EMC shield - Shields the ASTER II against interference
- Firmware updates available via the Gate Control Station app
Package Includes
- Gate ASTER II Bluetooth® MOSFET for Version 3 Gearbox
Specification
General
Parts & Accessories Type | Electric Internal Parts, Internal Parts, |
|---|---|
Internal Part Type | MOSFET |
 |  Custom Parts |
Weight and Dimension
 | Approx. 0.026kg |
|---|
Part Specific
Part for Power Source Type | Electric, HPA, |
|---|---|
Package Includes | MOSFET |
Electric Part Specific
 | V3 Gearbox |
|---|---|
Gearbox Version Compatibility Variant | Version 3 |
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.