• Pistol Calibre Receiver
  • MP5 Style Magazine
  • AEG 2.5 Gearbox

Finally released, the highly anticipated QRF Mod.1 is a pistol calibre style AR replica built by KWA to the highest of standards, with an excellent build quality, finish, and wide range of features to make this an absolute beast of an Airsoft Gun. This variant of the QRF features curved MP5 style magazines, and a curved stock. If you love the MP5 and the AR platform this Airsoft gun features the best parts from each platform.

The replica even comes with upgraded externals right out of the box, with a high quality PTS Syndicate removable flip-up iron sight pair and PTS polymer pistol grip.
This Airsoft AEG features a range of features designed to make it dominate in CQB environments, but is also performs great outdoors as well. With a short compact design the replica features a sliding PDW style stock allowing you to take corners more aggressively without the fear of snagging for tighter more consistent game play. 

This replica is perfect for those Airsoft skirmishers who are looking for a pistol calibre AR, or for those who need a gun for tight CQB engagements.

Full description


This Airsoft Gun is built from high quality components, with a wobble free design and features an Alloy receiver, hand guard, outer barrel, and internals, with a polymer pistol grip, battery storage compartment and butt plate.

This Airsoft gun is powered by Electric, with a large battery storage compartment as part of he stock, allowing a wide range of batteries to be used, with support for large Ni-Mh and LiPo battery to be used. The gun fires in semi and fully automatic, with an impressive rate of fire sure to send the enemy team running.

This variant of the replica has many features you would typically expect from an MP5, making this a great transitional replica between the platforms. The magazine is curved like the MP5 magazines for a similar feel, and holds up to 85 rounds. The weapon controls such as the magazine release, and bolt release are ambidextrous making it great for both left and right handed shooters, or for those who like to transition shoulders in tight CQB environments. The butt plate is also curved to mimic the stock on the MP5, and can be collapsed to two open positions and closed. The guns magazine release can be accessed from three positions, left and right like a traditional AR, as well as from both sides at the bottom using the MP5 style paddle release.

The hand guard of the replica features both MLOK panel slots, and 20mm RIS / RAS Rail panels allowing for a wide range of aftermarket attachments to be fitted. The gun also comes with two MLOK to 20mm Rail panels included allowing you to use all the same accessories you have used on your other Airsoft guns as well. The top of the replica features a full length 20mm RIS / RAS rail to allow even the largest sight and scope set ups to be used, with ample space for holographic and magnifier setups.

The replica features an adjustable hop-up unit for range and accuracy, which can be quickly adjusted when accessed behind the mock bolt plate when the charging handle is to the rear. The hop-up unit adds range and accuracy to guns by adding a small amount of spin to the BB as it travels down the barrel to displace air, giving each round better stability to allow it to travel further. The adjuster is of a radial design, allowing more acculturate and concise adjustment allowing a wide range of BB weights to be used.

Internally the replica has KWA's stamp of quality, with their own modified V2 style gearbox, also known as the 2.5 AEG gearbox, which is designed with many advanced features not seen in other replicas. The gearbox features a quick change spring system, as well as a variable fps system, which are both easy to access and adjust. To adjust the FPS you simply unscrew the cover cap inside the battery storage compartment and then use the extended Allen key to adjust to requirement. If you push in and rotate the second cover the whole spring guide is released out the rear of the gearbox so the entire spring can be replaced in one go. The gearbox shell itself is reinforced to help prevent cracking under stress giving the gearbox shell a longer life, and features a cut out allowing you to install many aftermarket trigger board units. As standard with KWA, the standard parts are also high quality, with an impressive 18:1 gear set and 9mm ball bearings.


  • High quality build by KWA
  • KWA AEG 2.5 V2 Based Gearbox
  • MLOK hand guard
  • Pistol calibre AR style receiver
  • Airsoft 6mm BB Gun
  • 22'' / 26.75'' in length
  • 8'' in height
  • 6.75'' outer barrel
  • Safe, Semi and Fully Automatic Firing Modes
  • Adjustable hop-up unit for range and accuracy
  • Two 20mm RIS / RAS MLOK Rail panels included
  • Ambidextrous magazine release
  • Ambidextrous mock bolt release
  • Switch Life Extender (SLE)
  • Ambidextrous Sling Plate
  • MP5 Style magazine release
  • 80 round MP5 Style curved magazine
  • PDW style three position sliding stock
  • Drop-in ready for electronic trigger systems
  • Adjustable fps with quick-change spring
  • Extended mock charging handle
  • PTS BUIS flip-up 20mm RIS / RAS ironsight pair
  • PTS Polymer Pistol Grip
  • Full top length 20mm RIS / RAS Rail
  • Removable 14mm CCW Flash Hider
  • Swappable fire select
  • Mini tamiya connector
  • In-line fuse system
  • Battery storage compartment in the stock
  • Mock gas block and tube
  • 18:1 Gearset
  • 9mm Ball Bearings
  • 184mm inner barrel
  • Reinforced gearbox shell
  • KWA warranty sealed gearbox
  • Branded:
    • 'SER. V200200176 EU'
    • 'QRF MOD.1'
    • 'CAL.6MM'
    • 'KWA TML-6'
    • 'PTS'
    • 'KWA'

Package Includes

  • QRF Mod.1 AEG 2.5 Black SMG
  • 80rnd Medium Capacity Spring Loaded Magazine
  • MLOK 20mm RIS / RAS rail panel x2
  • PTS BUIS flip-up 20mm RIS / RAS iron sight pair
  • Instruction Manual
  • Allen Key
  • Extended Allen Key

Special Instructions

To lock the mock bolt plate back to adjust the hop up easily first pull the charging handle to the rear, then push the bolt catch upwards to catch. 

Before inserting the magazine always make sure that the following is not sticking out, as this can cause damage on insertion. Only place loaded magazines into the gun, or if you're going to dry fire ensure you push down the follower before inserting it into the replica.

The externals of the replica are metal where they would be on the real world gun. This includes things like the outer barrel, handguard, and receiver. If a real world gun has polymer parts then the gun will still be marked as full metal externals, examples of this would be an M4, where the Stock and Pistol grip are always made from Polymer.



Weapon Construction External
Weapon Type
Assault Rifle, Submachine Gun,
Over 18 Only Icon
Over 18
Icon UKARA - United Kingdom Airsoft Retailer Association
Defence / UKARA Required
Yes, No,
FPS Icon
FPS (Feet Per Second), using 0.20g BB
Approx. 340fps ± 10%, using 0.20g BB
Site Legal Icon
Site Legal, using 0.20g BB
Screwdriver Icon
Included Items
  • Magazine
  • Instruction Manual
  • Allen Key
  • M-LOK / RIS Rail Section
Skill Level Icon
User Skill Level
Regular Player, Experienced Player,

Weight and Dimension

Weight KG Icon
Weight (KG)
Approx. 2.48kg
Weapon Length Collapsed
Length (Collapsed)
Weapon Length Extended
Length (Extended)


Colour Wheel Greyscale
Primary Colour
Colour Wheel Greyscale
Secondary Colour
Two Tone Icon
Pre Two-Toned
Construction Icon
Alloy receiver, handguard, outer barrel, and internals, with a polymer pistol grip, battery storage compartment and butt plate
Weapon Construction External
External Construction
Gearbox Icon
Internal Construction

Weapon Specific

Power Source Icon
Powered By
Blowback Icon
Weapon Platform
M4 / AR15 / M16, AR 9mm,
Magazine Style Icon
Magazine Style
AR 9mm
Fire Select Icon
Fire Selector
PatrolBase | Fire Select Safe
Patrol Base | Fire Select - Semi Automatic
Semi Automatic
Patrol Base | Full Automatic
Full Automatic
Weapon Safety Features Icon
Safety Features
Trigger Lock
Shooter Configuration Icon
Shooter Configuration
Weapon Configuration Icon
Weapon Configuration
Weapon Scale Icon
Weapon Scale
Suggested BB Weight


Hop-Up Unit Icon
Hop-Up Unit
Hop-Up Unit Adjuster Icon
Hop-Up Adjuster
Hop-Up Unit Location Icon
Hop-Up Location
Adjustable behind mock bolt plate when charging handle to the rear.


Weapon Furniture Icon
  • Railed Handguard
  • Flip-Up Ironsights
  • Railed Receiver
  • Ambidextrous Charging Handle
  • Ambidextrous Magazine Release
  • Sliding Stock
  • Ambidextrous Fire Selector
  • Monolithic Receiver
  • MLOK Rail System
  • Ambidextrous Safety
  • Ambidextrous Bolt Release
  • Ergonomic Pistol Grip
  • MP5 Style Magazine Release
  • Rail Adaptor
  • Adjustable Ironsights
Rail System Icon
Rail System
20mm RIS / RAS , MLOK Rail System,
Icon Stock Positions
Stock Setting
Weapon Length Extended
Stock Positions
3 Position
Sight Type Icon
Sight Type
Aperture Iron Sight
Sling Plate Icon
Sling Options
Buffer Plate


Outer Barrel Length (in)
Icon Thread Type
Outer Barrel Thread Type
Icon Thread Direction
Outer Barrel Thread Direction
CCW (Counter Clockwise)
Outer Barrel Thread Size
Inner Barrel Length

Magazine Specific

Magazine Type
Medium Capacity , Spring Loaded, AEG,
Magazine BB Capacity
Approx. 85 Rounds
Magazine BB Fill Method
Speed Loader
Magazine BB Fill Location

Electric Gun Specific Information

Gearbox Icon
Gearbox Version
V2.5 Gearbox
Wiring Icon
Gearbox Wiring
Rear Wired
Spring Change Icon
Gearbox Quick Change Spring
Digital Trigger Icon
Gearbox Electronic Trigger
Airsoft Motor Icon
Motor Type
High Torque
Battery Specific
Battery Connector
Patrol Base | Icon | Mini Tamiya
Mini Tamiya
Suggested Battery
Suggested Battery Type
Suggested Battery Configuration
Suggested Battery Voltage

Product Testing Data

Notepad Icon
Test Description
Tested using 0.20g BB
Notepad Icon
Test Date

Related video

QRF MOD 1 & 2 - DeeMoe, CQBRussian, & JahTheGreat

Need ideas for something extra?

Like this Airsoft Gun? Check out these awesome Products!