MLOK Rail & Attachments

If you're running a flashlight and laser on a compact primary, the PTS Syndicate Unity Tactical AXON Dual Pressure Switch; Modular will make your setup more intuitive to run than ever before! Designed to take up as little rail space as possible while providing functionality similar to the Unity TAPS switch, the AXON is about as small as dual switches get, measuring approximately 7cm end to end. The integrated mount fits 20mm Picatinny rails but an M-LOK adapter plate is included, allowing you to fit the AXON to M-LOK slots.

The set includes a silver 2.5mm plug, a gold 2.5mm plug, a Crane plug and a SureFire plug, all of which are compatible with other plugs in the PTS Unity ecosystem. Each button on the AXON switch can be operated in both momentary-on and constant-on modes. For the angled switch, a half-press activates constant-on and a full press activates momentary-on. With the flat switch, a single press provides constant-on, and a double tap provides momentary on.

Designed with ergonomics in mind, the AXON can also be used as a hand stop and works perfectly mounted to the 12 o'clock rail with the "thumb over bore" or "C-clamp" grip. If you're sick of the struggle of running multiple pressure switches and seek a more professional looking primary, the PTS Syndicate Unity Tactical AXON Dual Pressure Switch; Modular will give you what you need!

If you're running a laser and flashlight on your primary, the PTS Syndicate Unity Tactical TAPS Dual Pressure Switch; Modular will make using these devices that bit easier! Designed to provide a single control location for both your flashlight and laser, the TAPS can be installed wherever you need it on any 20mm Picatinny, M-LOK or KeyMod rail system via its innovative modular mount. Forget using Velcro or zip-ties to keep your tatty pressure switches on board, the TAPS will keep your primary neat and furnish it with the high-end Unity Tactical look!

The innovation doesn't end with the mount either! Unlike comparable clones, the TAPS offers a modular plug system providing broad compatibility with the most common lights and lasers out there. Included in the set is a SureFire plug, an Insight plug, a silver plug for 3.5mm jacks and a gold plug for 3.5mm jacks, which can be used in whatever configuration suits the user.

Putting control of your light and laser literally beneath your fingertips, the PTS Syndicate Unity Tactical TAPS Dual Pressure Switch; Modular is not only user-friendly but also boasts official licensing from Unity Tactical, completing the elite look with licensed trademarks. If you're working on a build which needs the high-end look, the TAPS belongs on your gat!

If you're running a laser and flashlight on your primary, the PTS Syndicate Unity Tactical TAPS Dual Pressure Switch; Modular will make using these devices that bit easier! Designed to provide a single control location for both your flashlight and laser, the TAPS can be installed wherever you need it on any 20mm Picatinny, M-LOK or KeyMod rail system via its innovative modular mount. Forget using Velcro or zip-ties to keep your tatty pressure switches on board, the TAPS will keep your primary neat and furnish it with the high-end Unity Tactical look!

The innovation doesn't end with the mount either! Unlike comparable clones, the TAPS offers a modular plug system providing broad compatibility with the most common lights and lasers out there. Included in the set is a SureFire plug, an Insight plug, a silver plug for 3.5mm jacks and a gold plug for 3.5mm jacks, which can be used in whatever configuration suits the user.

Putting control of your light and laser literally beneath your fingertips, the PTS Syndicate Unity Tactical TAPS Dual Pressure Switch; Modular is not only user-friendly but also boasts official licensing from Unity Tactical, completing the elite look with licensed trademarks. If you're working on a build which needs the high-end look, the TAPS belongs on your gat!

If your MPX handguard is looking worse for wear, the SigAir M-LOK Handguard for MPX AEG is the fresh replacement you need! This is an original replacement part for the SigAir/VFC MPX AEG, the standard-length handguard which comes with the original SMG, constructed from CNC machined aluminium with a flawless finish.

M-LOK slots are present at the 3, 6, and 9 o'clock positions along with a short section of 20mm Picatinny rail up top, ready for your choice of accessories. Compatibility-wise, this part is specifically for the SigAir/VFC MPX AEG and probably won't work with other brands. If your beautiful MPX handguard has gained some battle wear and you want to restore it, this handguard will do the trick!

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

If you want a striking new look for your AK, the 5KU CNC Aluminium MK3 M-LOK Chassis for CYMA AK AEGs will do the trick! This CNC aluminium chassis transforms the AK design, bringing it into line with more modern platforms with M-LOK slots, a lengthy 20mm Picatinny rail up top and a dynamic, angular look. 

Compatibility-wise, this kit is designed for CYMA AK AEGs of the CM.04x and Cm.05x series using the VFC external construction style. It may fit other VFC-style AKs but won't fit AKs based on the TM AK-47 AEG (CM.028, CM.5xx, CM.03x & JG AKs) nor will it fit AKS-74U AEGs. If your AK needs a 21st-century facelift to compete with modern designs, kit it out with the CNC Aluminium MK3 M-LOK Chassis for CYMA AK AEGs from 5KU!

This minimalistic hand stop provides you with a secure grip on your rifle for excellent handling and faster transitions during your skirmishes. It is constructed from a lightweight alloy, which makes it strong and bump-resistant but doesn't add lots of extra weight to your platform. The hand stop ensures that you are always gripping your gun at the exact same spot, so you can operate your rifle with surgical precision from muscle memory.

This Hand stop attaches to your handguard via an M-LOK mounting system. Attach it on your platform to prevent the shooting hand from reaching past the handguard to the muzzle. It also gives you a superior grip during wet weather skirmishing as it is designed specifically to fit the shape of your hand.

The Novritsch Angled Hand Stop is a great choice for those Airsofters who find it hard to judge the length of their rifle or want to quickly find their correct shooting position in the heat of the battle.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

The PTS Enhanced Rail Section for M-LOK is an Airsoft modular rail panel designed to be fit onto M-LOK hand guards, providing a 20mm RIS / RAS rail for mounting Picatinny accessories such as torches, lasers, grips and many other aftermarket attachments. The rail is available in several different lengths depending on what you require. This rail has a sleek look, owing to the weight-reducing corner cuts, keeping your M-LOK rail looking slick!

This rail is the perfect purchase for any Airsoft player who has got their hands on a new rifle with an M-LOK attachment system and is looking to take their gun to the next level by attaching parts and accessories.

For CQB, and for low light situations, there is no greater helping hand in the field than a tactical flashlight. The M640W Scout Light Pro from WADSN is the latest variant of their M6xx scout light series and comes complete with a low profile, angle adjustable mount for 20mm Picatinny rails, an angle adjustable M-LOK/KeyMod mount, and both the push button tail cap and the pressure switch tail cap. This light reportedly pumps out 540 lumens and literally turns night into day with its dazzling brightness, which is only exacerbated by its stroboscopic mode which is intended to distract the enemy and disorient them as you enter the room to clear it!

If your M4/AR-15 is due a style up, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need! This unique handguard boasts hexagonal vent ports, M-LOK slots at 3, 6, and 9 o'clock and a 20mm Picatinny rail up top, ready for your choice of M-LOK or 20mm Picatinny accessories. The vent ports both look fantastic and reduce weight considerably, giving you a fast-to-point front end and slick external styling. 

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. The HEX handguard also includes the correct barrel nut to mount it, pre-installed inside the handguard and constructed from aluminium. 

As with most M4/AR-15 handguards, you'll need an M4/AR-15 barrel nut wrench to install the HEX but it should fit most M4/AR-15 receivers on the market, AEG or GBB. If you're looking for a fresh look for your AR platform and want more accessory options with less overall weight, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need!

If you're looking for an M-LOK QD sling socket which is ergonomically designed and won't contort your sling, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice. Designed as an alternative to built-in QD sling sockets and standard flat sockets, when installed, this socket faces the shooter, resulting in a more comfortable sling position and less chance of tangles.

Constructed from high-density polymer with a steel QD cup, this socket should be compatible with most QD sling swivels on the market, allowing you to install or disconnect your sling quickly. Due to differences in tolerance between manufacturers, we suggest thoroughly testing this socket before entrusting it with any weight unless you're using it with a PTS-branded QD swivel. If you find the built-in QD sockets on your handguard are positioned suboptimally or don't have any QD sockets on your M-LOK handguard, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice!

If you're looking for an M-LOK QD sling socket which is ergonomically designed and won't contort your sling, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice. Designed as an alternative to built-in QD sling sockets and standard flat sockets, when installed, this socket faces the shooter, resulting in a more comfortable sling position and less chance of tangles.

Constructed from high-density polymer with a steel QD cup, this socket should be compatible with most QD sling swivels on the market, allowing you to install or disconnect your sling quickly. Due to differences in tolerance between manufacturers, we suggest thoroughly testing this socket before entrusting it with any weight unless you're using it with a PTS-branded QD swivel. If you find the built-in QD sockets on your handguard are positioned suboptimally or don't have any QD sockets on your M-LOK handguard, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice!

If you're searching for a tactical vertical foregrip with slick styling and flawless handling, the PTS Syndicate EPF-M Modular Foregrip is perfect! Ot comes with grippy texturing and a low-profile design for reduced snagging, giving you ample traction without the risk of it getting caught on the terrain.

The EPF-M mounts to M-LOK rails via its aluminium mounting apparatus. The inside is hollow, which reduces the overall weight of the foregrip, keeping your front end easy to move between targets. If you want more control over your primary when sweeping rapidly between targets, the PTS Syndicate EPF-M Modular Foregrip is perfect for the task!

If you're looking for stylish and realistic external upgrades for your M4/AR-15, you should consider the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail! This CNC-machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with a 20mm Picatinny rail along the top. It comes in 4 different lengths: 7.5 and 9.5-inch for CQB builds, 10.5-inch for mid-length and 12.5-inch for carbine-length platforms.

The SR stands for suppressor-ready, as this handguard has space within for a 1.5" diameter Airsoft suppressor. This provides an integrally suppressed look which is sleek and stylish, matching modern AR15 systems. It also comes with Griffin Armamnet trademarks, adding to the style and realism.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads, which is almost all of them, thankfully. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail will do the trick!

If you're looking for stylish and realistic external upgrades for your M4/AR-15, you should consider the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail! This CNC-machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with a 20mm Picatinny rail along the top. It comes in 4 different lengths: 7.5 and 9.5-inch for CQB builds, 10.5-inch for mid-length and 12.5-inch for carbine-length platforms.

The SR stands for suppressor-ready, as this handguard has space within for a 1.5" diameter Airsoft suppressor. This provides an integrally suppressed look which is sleek and stylish, matching modern AR15 systems. It also comes with Griffin Armamnet trademarks, adding to the style and realism.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads, which is almost all of them, thankfully. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail will do the trick!

If you're looking for stylish and realistic external upgrades for your M4/AR-15, you should consider the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail! This CNC-machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with a 20mm Picatinny rail along the top. It comes in 4 different lengths: 7.5 and 9.5-inch for CQB builds, 10.5-inch for mid-length and 12.5-inch for carbine-length platforms.

The SR stands for suppressor-ready, as this handguard has space within for a 1.5" diameter Airsoft suppressor. This provides an integrally suppressed look which is sleek and stylish, matching modern AR15 systems. It also comes with Griffin Armamnet trademarks, adding to the style and realism.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads, which is almost all of them, thankfully. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail will do the trick!

If you're looking for stylish and realistic external upgrades for your M4/AR-15, you should consider the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail! This CNC-machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with a 20mm Picatinny rail along the top. It comes in 4 different lengths: 7.5 and 9.5-inch for CQB builds, 10.5-inch for mid-length and 12.5-inch for carbine-length platforms.

The SR stands for suppressor-ready, as this handguard has space within for a 1.5" diameter Airsoft suppressor. This provides an integrally suppressed look which is sleek and stylish, matching modern AR15 systems. It also comes with Griffin Armamnet trademarks, adding to the style and realism.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads, which is almost all of them, thankfully. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail will do the trick!

If you're ergonomic accessories for your M-LOK handguard, the Airsoft Artisan M-LOK Stubby Vertical Foregrip is both stylish and comfy! This vertical foregrip is the stubby variety, designed for use with the "C-Clamp" aka thumb-over-bore grip, functioning as both a hand stop and VFG all in one. 

The grip itself is made from high-density polymer and the M-LOK screw and nut from steel, giving you minuscule added weight with the assurance the grip will never come off in your hand. The front and rear include crackle textured panels for improved wet weather gripping qualities and the shape of the grip itself is surprisingly comfortable, bowing inwards in the centre and flaring out towards the tip, filling out the hand perfectly. 

A massive perk of this compact grip is it only requires a single M-LOK slot to mount, meaning if you're short of space on your M-LOK front end you can probably squeeze the Stubby Vertical Foregrip on along with your other doodads. If you want to sweep between targets faster and keep your primary under control as you do it, the Airsoft Artisan M-LOK Stubby Vertical Foregrip will be an asset to you!

If you're ergonomic accessories for your M-LOK handguard, the Airsoft Artisan M-LOK Stubby Vertical Foregrip is both stylish and comfy! This vertical foregrip is the stubby variety, designed for use with the "C-Clamp" aka thumb-over-bore grip, functioning as both a hand stop and VFG all in one. 

The grip itself is made from high-density polymer and the M-LOK screw and nut from steel, giving you minuscule added weight with the assurance the grip will never come off in your hand. The front and rear include crackle textured panels for improved wet weather gripping qualities and the shape of the grip itself is surprisingly comfortable, bowing inwards in the centre and flaring out towards the tip, filling out the hand perfectly. 

A massive perk of this compact grip is it only requires a single M-LOK slot to mount, meaning if you're short of space on your M-LOK front end you can probably squeeze the Stubby Vertical Foregrip on along with your other doodads. If you want to sweep between targets faster and keep your primary under control as you do it, the Airsoft Artisan M-LOK Stubby Vertical Foregrip will be an asset to you!

If you like to keep pace with the latest British Army-issued firearms, you must be planning a KS-1/L403A1 build! The Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is the handguard you need to complete it. Constructed from superb quality CNC aluminium with flawlessly crisp matching, this rail is phenomenal quality, as we might expect from Airsoft Artisan. 

The L403A1 handguard measures 13 inches in overall length and is equipped with a 20mm Picatinny rail on top and M-LOK slots at 3, 6 and 9 o'clock positions with extra slots at the offset angles so you can position your accessories perfectly. Also included in the box is a set of outer barrel shims to completely eliminate wobble, allowing the L403A1 handguard to be paired with a wide variety of barrels on PTW, GBBR and AEG M4/AR-15 platforms. If you're working on a KS-1 build and want it to be stitch-perfect, the Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is a must!

This minimalistic hand stop provides you with a secure grip on your rifle for excellent handling and faster transitions during your skirmishes. It is constructed from a high-density polymer, which makes it strong and bump-resistant but doesn't add any extra weight to your platform. The hand stop ensures that you are always gripping your gun at the exact same spot, so you can operate your rifle with surgical precision from muscle memory.

This PTS Syndicate EP M-LOK Hand Stop attaches to your handguard via an M-LOK mounting system. Attach it on your platform to prevent the shooting hand from reaching past the handguard to the muzzle. It also gives you a superior grip during wet weather skirmishing as it is designed specifically to fit the shape of your hand.

This minimalistic hand stop provides you with a secure grip on your rifle for excellent handling and faster transitions during your skirmishes. It is constructed from a high-density polymer, which makes it strong and bump-resistant but doesn't add any extra weight to your platform. The hand stop ensures that you are always gripping your gun at the exact same spot, so you can operate your rifle with surgical precision from muscle memory.

This PTS Syndicate EP M-LOK Hand Stop attaches to your handguard via an M-LOK mounting system. Attach it on your platform to prevent the shooting hand from reaching past the handguard to the muzzle. It also gives you a superior grip during wet weather skirmishing as it is designed specifically to fit the shape of your hand.

This minimalistic hand stop provides you with a secure grip on your rifle for excellent handling and faster transitions during your skirmishes. It is constructed from a high-density polymer, which makes it strong and bump-resistant but doesn't add any extra weight to your platform. The hand stop ensures that you are always gripping your gun at the exact same spot, so you can operate your rifle with surgical precision from muscle memory.

This PTS Syndicate EP M-LOK Hand Stop attaches to your handguard via an M-LOK mounting system. Attach it on your platform to prevent the shooting hand from reaching past the handguard to the muzzle. It also gives you a superior grip during wet weather skirmishing as it is designed specifically to fit the shape of your hand.

Turn your boring SSG10 or VSR-10 sniper rifle into a futuristic-looking rifle from a galaxy far far away! The Novritsch SSG10 A3 Stock has a lightweight and skeletonised design, perfect for those who enjoy sniping but like to get a bit more stuck in and charge around the battlefield. There are a lot of practical features that come included with this stock, the stock is foldable for easier transport, the cheek rest is fully adjustable and the handguard features M-LOK rail sections on either side.

You will have to install this stock yourself, only attempt if you are confident in your ability and understanding. Do not attempt if you are unsure as it can lead to damage.

This stock creates a menacing image for your SSG10 or VSR-10 platform, with the Novritsch SSG10 A3 Stock you are sure to out-manoeuvre and out-class all those who dare to test you!