Search results for 'hera'

If you're looking for a sturdy upgrade to your AEG, you can't get any better than something from Bolster Armouries. This O-ring is constructed from high-density rubber and provides a superior seal to increase the reliability and lifespan of your Airsoft rifle. This O-ring can improve your air seal consistency, which can result in increased accuracy. This o-ring is compatible with most AEG piston heads.

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG (VFC OEM) and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb! Compatibility-wise, this magazine is specifically for the VFC-manufactured Cybergun SCAR-H AEG and won't fit the Ares-made versions.

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG (VFC OEM) and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb! Compatibility-wise, this magazine is specifically for the VFC-manufactured Cybergun SCAR-H AEG and won't fit the Ares-made versions.

For a sturdy upgrade to your AEG the FPS X-Ring is a piston head seal with a quadrilobate section, which during dynamic stresses are not subject to seal rounding.

X-Rings have less wear than O-Rings as they require less radial pre-stress which results in lower contact pressure.
A lubricant reservoir can be created between the sealing lips using silicone.

Installing this ring will optimise the sealing effect thanks to a better pressure distribution due to the square section.
The X-Ring eliminates any negative effects due to the closing line of the mould, as this is located in the groove between the two lips.

The Armorer Works Custom DL-44 Smuggler Heavy Blaster is about as futuristic cowboy as you can get! Underneath all these space-age upgrades you will find a fully functioning Airsoft Mauser M1932. Both the scope and muzzle device are constructed from a high-quality alloy with a clean finish. The DL-44 has a detachable magazine and semi/full auto select fire configuration, making for a mean space pistol which perfectly captures the retrofuturism style!

The DL-44 Smuggler Heavy Blaster comes in two separate boxes, one contains the M1932 and magazine and the other box contains the Smuggler muzzle break and scope. Whether you take this sidearm to fight against some cosmic fascists and save a princess or proudly display it as a die-hard space nerd, the Armorer Works Custom DL-44 Smuggler Heavy Blaster is the perfect blaster pistol for rising against any totalitarian dictatorship.

This Airsoft replica may not shoot lasers like Han Solo's personal DL-44 blaster, but it echoes the external appearance impeccably!

If you're looking for an AR-15 with a unique look, you've found it! Built in partnership between ActionSportGames, ICS and HERA ARMS this rifle is an Airsoft gun like no other. Based on the AR-15 Mil-spec variant of the HERA ARMS CQR this rifle uses ICS's brand new SSS AEG Gearbox design and is officially licensed and fully trademarked.

The Airsoft replica itself is constructed from a mixture of high quality alloys and polymers, with an Alloy Receiver, Handguard Outer Barrel and Internals, with a Polymer Stock, Magazine, Foregrip and Flip-up Iron Sights. The rifle features a high quality finish, with heavy duty materials leading to a highly detailed and realistic looking rifle. The rifle isn't just a quality build, it also come fully trademarked with all the textual markings and logo shown on the real rifle for higher levels of realism.

If you're after a high-performance build, then the GATE EON PROTECTOR Cylinder Head belongs inside! This CNC aluminium cylinder head is compatible with version 2 and version 3 gearboxes and is equipped with a pair of O-rings around its circumference intended to seal the gap between the cylinder and head for maximum air retention and efficiency.

Its robust CNC aluminium construction pairs perfectly with the shock-absorbing rubber pad pre-installed on the rear of the cylinder head, reducing impact stress on the gearbox shell, piston head and cylinder head for an increased AEG lifespan. If you're upgrading your V2 or V3 gearbox or building a masterpiece from the ground up, the GATE EON PROTECTOR Cylinder Head is a superb choice!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs.

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound.

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for top-tier performance from your next AEG build, the Warhead Industries CNC Black Brushless Motor belongs inside! This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs and is the same motor used in Bolster Armouries custom builds, a testament to its quality, reliability and incredible performance.

The CNC Black Brushless motor boasts a CNC 7075 aluminium housing and hand-wound stator, promising a more precise wind than machine-wound stators which translates to improved power and efficiency. To keep the immense power of the Warhead CNC Black under control, the motor is equipped with what is known as an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed.

The perks of a brushless motor over conventional motors include higher torque-to-weight ratio, reduced wear and tear, reduced operating noise and reduced heat build-up, allowing you to let rip with long bursts guilt-free! If you have your sights set on the pinnacle of AEG performance, the Warhead Industries CNC Black Brushless Motor; Long Shaft is the motor you need to achieve it!

If you're looking for top-tier performance from your next AEG build, the Warhead Industries CNC Black Brushless Motor belongs inside! This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs and is the same motor used in Bolster Armouries custom builds, a testament to its quality, reliability and incredible performance.

The CNC Black Brushless motor boasts a CNC 7075 aluminium housing and hand-wound stator, promising a more precise wind than machine-wound stators which translates to improved power and efficiency. To keep the immense power of the Warhead CNC Black under control, the motor is equipped with what is known as an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed.

The perks of a brushless motor over conventional motors include higher torque-to-weight ratio, reduced wear and tear, reduced operating noise and reduced heat build-up, allowing you to let rip with long bursts guilt-free! If you have your sights set on the pinnacle of AEG performance, the Warhead Industries CNC Black Brushless Motor; Long Shaft is the motor you need to achieve it!

If you're looking for a more secure way to keep your trousers in place then the Novritsch Heavy Duty Belt Buckle is exactly what you need! This aluminium alloy-constructed buckle is designed for 5cm belt webbing, such as the Battle Belt 4.0 and 3.0. Polymer belt buckles are old news, metal buckles are much more secure, durable and stylish. 

If you have a damaged buckle or fancy an upgrade from plastic to metal, then the Novritsch Heavy Duty Belt Buckle is perfect for you. Just make sure your belt has 5cm webbing and will fit in the buckle! Keep your trousers where they're supposed to be whilst on the battlefield and save yourself the embarrassment of being caught with your pants around your ankles, literally...

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the short shaft variant, is designed for AR36, Thompson, AUG and AK AEGs.

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound.

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the short shaft variant, is designed for AR36, Thompson, AUG and AK AEGs.

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound.

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the short shaft variant, is designed for AR36, Thompson, AUG and AK AEGs.

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound.

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

A medium-sized Hard Case made to an extremely tough standard, which is great for storing Airsoft / Photography and other sensitive and expensive equipment to keep it safe from the elements. With plenty of certifications from third-party quality assurance company Intertek, you can store your valuables with absolute confidence.

A heavy duty external webbing belt with velcro surface inside, which can be used as a mounting point for webbing.

A heavy duty external webbing belt with velcro surface inside, which can be used as a mounting point for webbing.

A heavy duty external webbing belt with velcro surface inside, which can be used as a mounting point for webbing.

If you're done with ringing ears after taking a grenade hit, the EARMOR M32 Plus MOD3 Electronic Communication Headset is what you need. This headset not only looks the business but offers active hearing protection and communications functionality, allowing you to hear your environment clearly while staying protected against loud bangs.

Active noise cancellation reduces the volume of sudden, loud bangs and increases the volume of environmental noises, making this headset the perfect countermeasure for a grenade-happy enemy team. The M32 Plus also offers Communications functionality when combined with the EARMOR M52 PTT and a radio. This means that you will be able to hear the whispers of the enemy team in the next room but if a grenade comes around the corner your ears will be well protected, subject to nothing more than a dull thud. Even if you don't run comms, active noise cancellation is the ideal counter to grenades in tight spaces!

If you want to keep cool during those hot summer skirmishes, the Novritsch Hot Weather Boonie Hat is the best way to do it! Based on military designs with added mesh vents for improved airflow, the Hot Weather Boonie is equipped with foliage loops on the front so you can blend in with your surroundings by adding natural foliage. On the rear, we are treated to a small section of velcro with laser-cut MOLLE loops built in, ready for a pouch or patch of your choice.

Compatibility with anti-fog or EXFog cold air units is provided by a pair of discrete hose routes between the brim and the main body of the hat, saving you the hassle of carrying out messy modifications. The Hot Weather Boonie is adjustable in size via the bungee cord and polymer toggle on the rear but each size has a maximum head circumference to ensure everyone gets a tight fit. More information on sizing can be found in the "Features" section of the full description.

If you've fallen out with your helmet for comfort or cooling reasons, the Novritsch Hot Weather Boonie Hat is ready to take its place and keep your noggin cool and fresh for maximum in-game focus!

If you want to keep cool during those hot summer skirmishes, the Novritsch Hot Weather Boonie Hat is the best way to do it! Based on military designs with added mesh vents for improved airflow, the Hot Weather Boonie is equipped with foliage loops on the front so you can blend in with your surroundings by adding natural foliage. On the rear, we are treated to a small section of velcro with laser-cut MOLLE loops built in, ready for a pouch or patch of your choice.

Compatibility with anti-fog or EXFog cold air units is provided by a pair of discrete hose routes between the brim and the main body of the hat, saving you the hassle of carrying out messy modifications. The Hot Weather Boonie is adjustable in size via the bungee cord and polymer toggle on the rear but each size has a maximum head circumference to ensure everyone gets a tight fit. More information on sizing can be found in the "Features" section of the full description.

If you've fallen out with your helmet for comfort or cooling reasons, the Novritsch Hot Weather Boonie Hat is ready to take its place and keep your noggin cool and fresh for maximum in-game focus!

If you want to keep cool during those hot summer skirmishes, the Novritsch Hot Weather Boonie Hat is the best way to do it! Based on military designs with added mesh vents for improved airflow, the Hot Weather Boonie is equipped with foliage loops on the front so you can blend in with your surroundings by adding natural foliage. On the rear, we are treated to a small section of velcro with laser-cut MOLLE loops built in, ready for a pouch or patch of your choice.

Compatibility with anti-fog or EXFog cold air units is provided by a pair of discrete hose routes between the brim and the main body of the hat, saving you the hassle of carrying out messy modifications. The Hot Weather Boonie is adjustable in size via the bungee cord and polymer toggle on the rear but each size has a maximum head circumference to ensure everyone gets a tight fit. More information on sizing can be found in the "Features" section of the full description.

If you've fallen out with your helmet for comfort or cooling reasons, the Novritsch Hot Weather Boonie Hat is ready to take its place and keep your noggin cool and fresh for maximum in-game focus!

If you want to keep cool during those hot summer skirmishes, the Novritsch Hot Weather Boonie Hat is the best way to do it! Based on military designs with added mesh vents for improved airflow, the Hot Weather Boonie is equipped with foliage loops on the front so you can blend in with your surroundings by adding natural foliage. On the rear, we are treated to a small section of velcro with laser-cut MOLLE loops built in, ready for a pouch or patch of your choice.

Compatibility with anti-fog or EXFog cold air units is provided by a pair of discrete hose routes between the brim and the main body of the hat, saving you the hassle of carrying out messy modifications. The Hot Weather Boonie is adjustable in size via the bungee cord and polymer toggle on the rear but each size has a maximum head circumference to ensure everyone gets a tight fit. More information on sizing can be found in the "Features" section of the full description.

If you've fallen out with your helmet for comfort or cooling reasons, the Novritsch Hot Weather Boonie Hat is ready to take its place and keep your noggin cool and fresh for maximum in-game focus!

If you want to keep cool during those hot summer skirmishes, the Novritsch Hot Weather Boonie Hat is the best way to do it! Based on military designs with added mesh vents for improved airflow, the Hot Weather Boonie is equipped with foliage loops on the front so you can blend in with your surroundings by adding natural foliage. On the rear, we are treated to a small section of velcro with laser-cut MOLLE loops built in, ready for a pouch or patch of your choice.

Compatibility with anti-fog or EXFog cold air units is provided by a pair of discrete hose routes between the brim and the main body of the hat, saving you the hassle of carrying out messy modifications. The Hot Weather Boonie is adjustable in size via the bungee cord and polymer toggle on the rear but each size has a maximum head circumference to ensure everyone gets a tight fit. More information on sizing can be found in the "Features" section of the full description.

If you've fallen out with your helmet for comfort or cooling reasons, the Novritsch Hot Weather Boonie Hat is ready to take its place and keep your noggin cool and fresh for maximum in-game focus!

If you want to keep cool during those hot summer skirmishes, the Novritsch Hot Weather Boonie Hat is the best way to do it! Based on military designs with added mesh vents for improved airflow, the Hot Weather Boonie is equipped with foliage loops on the front so you can blend in with your surroundings by adding natural foliage. On the rear, we are treated to a small section of velcro with laser-cut MOLLE loops built in, ready for a pouch or patch of your choice.

Compatibility with anti-fog or EXFog cold air units is provided by a pair of discrete hose routes between the brim and the main body of the hat, saving you the hassle of carrying out messy modifications. The Hot Weather Boonie is adjustable in size via the bungee cord and polymer toggle on the rear but each size has a maximum head circumference to ensure everyone gets a tight fit. More information on sizing can be found in the "Features" section of the full description.

If you've fallen out with your helmet for comfort or cooling reasons, the Novritsch Hot Weather Boonie Hat is ready to take its place and keep your noggin cool and fresh for maximum in-game focus!

If you want to keep cool during those hot summer skirmishes, the Novritsch Hot Weather Boonie Hat is the best way to do it! Based on military designs with added mesh vents for improved airflow, the Hot Weather Boonie is equipped with foliage loops on the front so you can blend in with your surroundings by adding natural foliage. On the rear, we are treated to a small section of velcro with laser-cut MOLLE loops built in, ready for a pouch or patch of your choice.

Compatibility with anti-fog or EXFog cold air units is provided by a pair of discrete hose routes between the brim and the main body of the hat, saving you the hassle of carrying out messy modifications. The Hot Weather Boonie is adjustable in size via the bungee cord and polymer toggle on the rear but each size has a maximum head circumference to ensure everyone gets a tight fit. More information on sizing can be found in the "Features" section of the full description.

If you've fallen out with your helmet for comfort or cooling reasons, the Novritsch Hot Weather Boonie Hat is ready to take its place and keep your noggin cool and fresh for maximum in-game focus!

If you're seeking an affordable way to protect your ears from bangs in CQB, the Earmor M300 Electronic Headset is a fine choice! A more affordable alternative to the full-fat M32 Headset, the M300 is available in two versions, the M300A and the M300T. The A version is designed to protect the ears from sudden, loud noises and enhance quiet noises and the T version has the same superb features with Bluetooth connectivity thrown into the mix. 

If you're seeking an affordable way to protect your ears from bangs in CQB, the Earmor M300 Electronic Headset is a fine choice! A more affordable alternative to the full-fat M32 Headset, the M300 is available in two versions, the M300A and the M300T. The A version is designed to protect the ears from sudden, loud noises and enhance quiet noises and the T version has the same superb features with Bluetooth connectivity thrown into the mix. 

If you're seeking an affordable way to protect your ears from bangs in CQB, the Earmor M300 Electronic Headset is a fine choice! A more affordable alternative to the full-fat M32 Headset, the M300 is available in two versions, the M300A and the M300T. The A version is designed to protect the ears from sudden, loud noises and enhance quiet noises and the T version has the same superb features with Bluetooth connectivity thrown into the mix. 

If you are looking for heavy-weight biodegradable BBs, NUPROL's RZR BBs would be a great choice! RZRs have a superb reputation for precision and tight tolerances and this version is made from a biodegradable material which means you can shoot as much as you want without worrying about cleanup afterwards.