Search results for 'smg case'

If you are in the market for a new SMG and you want something that stands out, the S&T UST9 has its own unique look and the performance to back it up! The UST9 is built exactly like the real thing; with a high-density polymer body, metal outer barrel and steel body pins to keep everything firmly together while allowing for quick disassembly. This results in a lightweight and strong platform which does not compromise on realism!

S&T has also added some thoughtful pre-upgraded parts to the UST9 formula; offering a 6.05mm tightbore inner barrel to improve accuracy with less risk of a jam than tighter bores, a pre-installed MOSFET to improve trigger response and rate of fire and a quick change spring system for easy power tuning without needing to open the gearbox shell. If you want an SMG that is realistically built and not an SMG-5 or SMG-7, the UST9 should do the trick!

If you are after a unique and affordable Airsoft AEG submachine gun, the Double Eagle M89A fits the bill! This AEG sports full metal construction, and its nearly 100% fibre reinforced polymer construction matches the real thing in almost every way. This AEG has a compact front end bristling in 20mm Picatinny rails, making it ready for any accessories you want to mount, and boasts as well designed and rock solid side folding stock allowing the M89 to be used in intense close quarters engagements and also fit into smaller gun bags/cases!

If CQB is your poison, you are going to love this one! The CM.106A AR-9 from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106A sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If CQB is your poison, or you have limited space in your kit bag, you are going to love this one! The CM.106 AR-9 PDW from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106 PDW sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If you love a classic, and don't we all, you will love the Snow Wolf MP18 SMG! This AEG is a replica of the real world MP18 submachine gun used by the Germans during WW1 for trench clearing in the hands of their famous "Sturmtrupppen" assault troops. This MP18 uses the magazine well of the later MP28 but is otherwise perfect for a WW1 reenactment, but could also do double duty as a Lanchester SMG for your Peaky Blinders loadout if you squint!

The Snow Wolf example is constructed entirely from metal and real wood, with its receiver, ported barrel shroud and trim parts being steel. This gives the MP18 a lot of heft and a very realistic feel, and its real wood stock is beautifully finished and perfectly shaped to match the real gun. If you want an SMG that stands out, this one sure does!

If you've got a thing for pistols in body kits, this gun probably already has your attention. This gun is based on the G&G GTP9 Gas Blowback Airsoft pistol, but with a complete replacement upper receiver to make the ultimate CQB carbine with plenty of kick, noise, and performance. If you think this is just another Gas Blowback, you're mistaken, this is going to change your CQB game.

Offering you the best of both worlds, the SRC SR4 ST Falcon-ZS lets you choose between using AR9 and STANAG magazines by using the handy included receiver adaptor. It's lightweight and compact design make the Falcon perfect for run and gun CQB playstyles.

With an integrated suppressor and PDW stock for that operator style, the Falcon boasts a wealth of other features such as MLOK front handguard, 20mm top rail and flip up ironsights, 280 round 9mm magazine as well as removable magwell grip the Flacon has a lot to love in a compact package.

Offering you the best of both worlds, the SR4 ST Falcon-W AR-9 AEG lets you choose between using AR9 and STANAG magazines by using the handy included receiver adaptor. It's lightweight and compact design make the Falcon perfect for run and gun CQB playstyles.

With a shortened handguard for increased mobility and a sound amplifying muzzle device to really make your presence heard, the Falcon boasts a wealth of other features such as MLOK front handguard, 20mm top rail and light enhancing flip up ironsights in addition to a 300 round 9mm magazine as well as a removable magwell grip the Flacon has a lot to love in a compact package.

This isn't just any P90, this is the Cyber Gun Licensed FN HERSTAL P90. Constructed from a mix of metal and polymer just like the real thing, stamped with official FN Herstal trades and fitted with the traditional red dot sight; this is a no-brainer for the P90 fanatic!

Issued to the US Secret Service, Belgian paratroopers, and special forces units from all around the world, you have to have been living under a rock to not notice this iconic PDW/submachine gun, especially for its role in Goldeneye 007 for the N64, The World is Not Enough and Stargate SG1. The Cyber Gun P90 is rocking the version 6 gearbox with a rotary adjustable HOP-up unit, and it may look funky but it has all it needs to keep the M4 and AK users on their toes! 

Need somewhere to store that THICC battery? This will do the job. Made from strong polymer this battery case weighs next to nothing meaning less overall weight when you add your battery. This battery box attaches to any 20mm RIS system but its slim and long design is optimized for SMG-5 variants with 20mm RIS systems installed.

A lightweight and tough protective carry case from NUPROL, which features wave foam internals as well as sliding catches and padlock loops.

A lightweight and tough protective carry case from NUPROL, which features wave foam internals as well as sliding catches and padlock loops.

A lightweight and tough protective carry case from NUPROL, which features wave foam internals as well as sliding catches and padlock loops.

It's the submachine gun that can be fired from a brief case! At just 33cm long, the CM.041J is a replica Airsoft gun which blurs the lines between Submachine gun and Machine Pistol.

Building a gearbox from scratch? You'll need a shell to get started! The ARCTURUS Version 3 Alloy Gearbox Shell is a reinforced design with a radiused cylinder window, additional material surrounding the cylinder for extra strength and 8mm bearing holes. The rear of the gearbox is also cut for a quick change spring guide. 

The version 3 shell is common to AK, AUG, AR36 and SMG-5K AEGs (not the regular SMG-5, though) so if you need a gearbox shell for any of these platforms this one will be compatible in most cases. 

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The CM.041 SMG-5 Patrol Base X Gate ASTER Upgraded Edition has been put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series, and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work, with the unique insight only a Bolster Armouries technician can provide.

The first thing the Bolster Armouries team do with the CM.041 is to tear it to pieces and build it back up to fulfil its true potential; replacing the basic CYMA ETU with the space-aged Gate ASTER ETU, modifying the HOP-up for better air seal and setting retention, and dropping in a Lonex Air Seal nozzle and Prometheus Purple HOP-up rubber. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. When we tested this AEG we were flabbergasted. 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 25 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The CM.041 SMG-5 Patrol Base X Gate ASTER Upgraded Edition has been put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series, and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work, with the unique insight only a Bolster Armouries technician can provide.

The first thing the Bolster Armouries team do with the CM.041 is to tear it to pieces and build it back up to fulfil its true potential; replacing the basic CYMA ETU with the space-aged Gate ASTER ETU, modifying the HOP-up for better air seal and setting retention, and dropping in a Lonex Air Seal nozzle and Prometheus Purple HOP-up rubber. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. When we tested this AEG we were flabbergasted. 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 25 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

A gun bag designed to accommodate up to two full sized rifles, and all the tools required for them. With its 1000D Polyester construction and water proofing, this is the perfect case for those with multiple AEGs looking for a robust case to transport them.

If you need a battery for your SMG-5 or AR36 handguard, the 8Fields Tactical 7.4V 2300mAh 20/40c LiPo Battery is ideal. This 2-cell 7.4V LiPo battery measures approximately 10 x 1.5 x 3.3 cm and is wired to a mini-Tamiya battery connector with approximately 10cm of wire length between the connector and cell group. 

The battery has a voltage of 7.4V, a capacity of 2300mAh and a continuous discharge rate of 20C with a maximum discharge rate of 40C. Ideally sized for SMG-5 or AR36 handguard battery compartments, this LiPo battery will also fit nicely in most fixed stock battery compartments. As is always the case with LiPo batteries, we recommend never leaving this battery on charge while unattended and always using a battery charging bag when charging. 

There has been a lot of fuss made about this particular AEG online, and let us tell you, the hype is real! The Krytac P90 AEG combines the P90s radical design with Krytac's industry expertise to produce the best performing P90 out there, with an unrivalled feature set and bomb-proof internals.

If you are after a caveman simple WWII SMG and the STEN is a bit too unconventional, the M3 Grease Gun should suit you well! Derived from the STEN but with a vertically oriented magazine and tanker-style sliding stock, the M3 was the US Army's solution to the need for accelerated SMG production during the Second World War.

The Snow Wolf M3 is patterned after the original M3 Grease Gun with its ratchet style charging handle which functions as the fire selector/safety catch in the Airsoft version and has a lovely electric blowback system which provides a slight bit of feedback from firing and drowns out the ever recognisable AEG muzzle report with a metal on metal "clank clank clank". Just like the real thing, the Snow Wolf M3 fires in fully automatic only, and has a very realistic weight and feel thanks to its majority steel full metal construction and gun metal grey finish. If you love a simple classic the Grease Gun has your name on it!

If you are after a caveman simple WWII SMG and the STEN is a bit too unconventional, the M3 Grease Gun should suit you well! Derived from the STEN but with a vertically oriented magazine and tanker-style sliding stock, the M3 was the US Army's solution to the need for accelerated SMG production during the Second World War.

The Snow Wolf M3 is patterned after the original M3 Grease Gun with its ratchet style charging handle which functions as the fire selector/safety catch in the Airsoft version and has a lovely electric blowback system which provides a slight bit of feedback from firing and drowns out the ever recognisable AEG muzzle report with a metal on metal "clank clank clank". Just like the real thing, the Snow Wolf M3 fires in fully automatic only, and has a very realistic weight and feel thanks to its majority steel full metal construction and gun metal grey finish. If you love a simple classic the Grease Gun has your name on it!

If you are a fan of the SCAR platform but you prefer to play CQB the Cyber Gun SCAR-SC has your name on it! The SCAR-SC is the Subcompact variant of the original FN SCAR MK16 rifle which was designed to replace the M4A1 in special forces service. The SCAR-SC boasts a shorter front end than the original SCAR, and a super compact sliding PDW stock, making it a fantastic tool for clearing tight corners when things get up close and personal.

The SCAR-SC has a CNC machined Aluminium upper receiver and a polymer lower receiver with ambidextrous controls, just like the real thing. Inside we are treated to an Ares EFCS gearbox and a slim type motor, resulting in a snappy trigger response and granting the ability to program burst modes with the Ares EFCS programmer. If you want a SCAR that can keep up with M4 PDWs in CQB, this is the only one!

If you want to transform your version 2 gearbox-equipped AEG into a true "smart gun", the Gate TITAN™ MOSFET V2; Expert Firmware will do exactly that. This advanced MOSFET/ETU system replaces the copper trigger contact inside the version 2 gearbox with optical sensors, eliminating the need for a cut-off lever, extending the lifespan of your AEG and offering unprecedented trigger sensitivity, fire mode and cycle control adjustment options. 

The latest version of the TITAN™ V2 includes the Expert Firmware, meaning you have immediate access to the most advanced programming functions of the TITAN™ without needing to pay more to update the firmware. With the Gate USB-Link or Blulink, you can set your pre-cocking level for a speedy trigger response, adjust your trigger sensitivity, tune active braking and adjust the rate of fire for a truly custom setup that suits your playstyle perfectly. The usual programmable MOSFET functions of other ETUs are also present, including burst mode, binary trigger, semi-auto-only, ramping semi-auto, dual-stage trigger and sniper delay. 

If you have an AEG mega-build on your mind using a version 2 gearbox, add the Gate TITAN™ MOSFET V2; Expert Firmware to your parts list to take it to the next level!

If you want to transform your version 2 gearbox-equipped AEG into a true "smart gun", the Gate TITAN™ MOSFET V2; Expert Firmware will do exactly that. This advanced MOSFET/ETU system replaces the copper trigger contact inside the version 2 gearbox with optical sensors, eliminating the need for a cut-off lever, extending the lifespan of your AEG and offering unprecedented trigger sensitivity, fire mode and cycle control adjustment options. 

The latest version of the TITAN™ V2 includes the Expert Firmware, meaning you have immediate access to the most advanced programming functions of the TITAN™ without needing to pay more to update the firmware. With the Gate USB-Link or Blulink, you can set your pre-cocking level for a speedy trigger response, adjust your trigger sensitivity, tune active braking and adjust the rate of fire for a truly custom setup that suits your playstyle perfectly. The usual programmable MOSFET functions of other ETUs are also present, including burst mode, binary trigger, semi-auto-only, ramping semi-auto, dual-stage trigger and sniper delay. 

If you have an AEG mega-build on your mind using a version 2 gearbox, add the Gate TITAN™ MOSFET V2; Expert Firmware to your parts list to take it to the next level!

If you're a British firearms enthusiast you must recognise the L2A3 Sterling SMG, the iconic British submachine gun which served with the British Army throughout the Cold War and beyond. Replacing the STEN gun, the Sterling was everything the STEN should have been, offering improved ergonomics, semi-auto and full auto fire modes and a complex but highly functional folding stock. This SMG was one of the few British firearms squaddies reportedly liked, and the S&T replica matches up with the Sterling's superb reputation in the real steel world. 

Constructed almost entirely from steel with all the features one would expect from an authentic Sterling replica, the S&T L2A3 is built like a tank, with the appropriate weight and heft for a realistic experience whether you're skirmishing with it or just fondling it on the sofa. Inside, we have a unique gearbox type with an alloy shell, caged motor and 18:1 ratio steel gears, with a well-concealed rotary adjustable HOP-up unit on the outside of the outer barrel. If you're looking for an old-school SMG or are working on your historic British firearms collection, you need the S&T L2A3 MK4 Sterling!

If you're planning on treating yourself or a loved one to the VORSK VMP-1X, this is worth a look! The VMP-1X Premium Beginner Bundle includes the VMP-1X GBB SMG in pre two-tone blue and a PARRA Griffon Wheeled Hard Storage Case to keep your SMG, your two magazines and your suppressor all neat and tidy. 

Please note: The case is fitted with pick 'n' pluck foam and we are unable to accept returns on any cases with foam which has been altered. 

If you love a classic, and don't we all, you will love the Snow Wolf MP18 SMG! This AEG is a replica of the real world MP18 submachine gun used by the Germans during WW1 for trench clearing in the hands of their famous "Sturmtrupppen" assault troops. This MP18 uses the magazine well of the later MP28 but is otherwise perfect for a WW1 reenactment, but could also do double duty as a Lanchester SMG for your Peaky Blinders loadout if you squint!

The Snow Wolf example is constructed entirely from metal and real wood, with its receiver, ported barrel shroud and trim parts being steel. This gives the MP18 a lot of heft and a very realistic feel, and its real wood stock is beautifully finished and perfectly shaped to match the real gun. If you want an SMG that stands out, this one sure does!

For those of you looking for a simple, yet effective red-dot that's ideal for pistols or compact SMGs, you've come to the right place! Easily fitted to any Picatinny rail using the 2 included bolts, tightened with an Alley key, the sight takes CR2032 button batteries and is switched on and off using the large rubber side click button.

This mini Airsoft Red Dot Sight also comes with a protective Polymer casing that is excellent when storing and transporting your AEG or Optic if you keep it separate from your Airsoft Gun. Windage and Elevation is also easily adjustable for sighting in your Airsoft gun any time of the day using an Allen key.

If you are looking for an all in one transportation solution, consider Specna Arms' new range of gun bags! The V1 model has an overall length of 98cm, but features an internal extension piece which can extend the case to house a rifle of up to 120cm in length! The Gun Bag V1 also features a large external pouch which can easily house most small submachine guns and pistol grip shotguns, and additional external pouches for magazines and other bits. Put all your guns in one bag, because we have a limited number of hands!