Refine results
Refine by

Search results for 'smg case'

Viewing 150 of 750.
£16.99
  • Press-Stud MOLLE
  • Fits 3 x SMG-5 mags
  • Velcro Securing Flaps

A triple magazine pouch by Viper Tactical, allowing you to carry up to three SMG-5 style magazines on any MOLLE compatible system.

£7.99
  • Velcro Secure Flap
  • Holds 2 Magazines
  • For UMP / UTR45 / P90 Mags


If you are running an SMG with chunky mags like the P90, SMG-45, UMP or UTR-45 this is the mag pouch you need! MOLLE compatible and ready to mount to chest rigs, plate carriers, belts or anywhere else with MOLLE loops, this magazine pouch is designed to hold up to two Airsoft P90, UMP, SMG-45 or UTR45 submachine gun magazines. 

£7.99
  • Velcro Secure Flap
  • Holds 2 Magazines
  • For UMP / UTR45 / P90 Mags


If you are running an SMG with chunky mags like the P90, SMG-45, UMP or UTR-45 this is the mag pouch you need! MOLLE compatible and ready to mount to chest rigs, plate carriers, belts or anywhere else with MOLLE loops, this magazine pouch is designed to hold up to two Airsoft P90, UMP, SMG-45 or UTR45 submachine gun magazines. 

£14.99
  • MOLLE mag pouch
  • Full seal design
  • For SSG96/24, L96 & M24 mags

If you need somewhere to stash your sniper rifle magazines, Novritsch has what you need! The Full Seal MOLLE Pouch for SSG96/24 Sniper Rifle holds a single M24, L96, SSG96 or SSG24 magazine and is a full seal design which keeps your magazine secure during energetic movement. 

The pouch mounts to MOLLE webbing found on chest rigs, plate carriers, tactical vests, belts and backpacks and can be positioned wherever you like, as long as you can reach it when needed!

£14.99
  • MOLLE mag pouch
  • Full seal design
  • For SSG96/24, L96 & M24 mags

If you need somewhere to stash your sniper rifle magazines, Novritsch has what you need! The Full Seal MOLLE Pouch for SSG96/24 Sniper Rifle holds a single M24, L96, SSG96 or SSG24 magazine and is a full seal design which keeps your magazine secure during energetic movement. 

The pouch mounts to MOLLE webbing found on chest rigs, plate carriers, tactical vests, belts and backpacks and can be positioned wherever you like, as long as you can reach it when needed!

£14.99
  • MOLLE mag pouch
  • Full seal design
  • For SSG96/24, L96 & M24 mags

If you need somewhere to stash your sniper rifle magazines, Novritsch has what you need! The Full Seal MOLLE Pouch for SSG96/24 Sniper Rifle holds a single M24, L96, SSG96 or SSG24 magazine and is a full seal design which keeps your magazine secure during energetic movement. 

The pouch mounts to MOLLE webbing found on chest rigs, plate carriers, tactical vests, belts and backpacks and can be positioned wherever you like, as long as you can reach it when needed!

£14.99
  • MOLLE mag pouch
  • Full seal design
  • For SSG96/24, L96 & M24 mags

If you need somewhere to stash your sniper rifle magazines, Novritsch has what you need! The Full Seal MOLLE Pouch for SSG96/24 Sniper Rifle holds a single M24, L96, SSG96 or SSG24 magazine and is a full seal design which keeps your magazine secure during energetic movement. 

The pouch mounts to MOLLE webbing found on chest rigs, plate carriers, tactical vests, belts and backpacks and can be positioned wherever you like, as long as you can reach it when needed!

£14.99
  • MOLLE mag pouch
  • Full seal design
  • For SSG96/24, L96 & M24 mags

If you need somewhere to stash your sniper rifle magazines, Novritsch has what you need! The Full Seal MOLLE Pouch for SSG96/24 Sniper Rifle holds a single M24, L96, SSG96 or SSG24 magazine and is a full seal design which keeps your magazine secure during energetic movement. 

The pouch mounts to MOLLE webbing found on chest rigs, plate carriers, tactical vests, belts and backpacks and can be positioned wherever you like, as long as you can reach it when needed!

£14.99
  • MOLLE mag pouch
  • Full seal design
  • For SSG96/24, L96 & M24 mags

If you need somewhere to stash your sniper rifle magazines, Novritsch has what you need! The Full Seal MOLLE Pouch for SSG96/24 Sniper Rifle holds a single M24, L96, SSG96 or SSG24 magazine and is a full seal design which keeps your magazine secure during energetic movement. 

The pouch mounts to MOLLE webbing found on chest rigs, plate carriers, tactical vests, belts and backpacks and can be positioned wherever you like, as long as you can reach it when needed!

£79.99
  • Multiple carry handles
  • Designed to carry two rifles
  • Single large external compartment

A gun bag designed to accommodate up to two full sized rifles, and all the tools required for them. With its 1000D Polyester construction and water proofing, this is the perfect case for those with multiple AEGs looking for a robust case to transport them.

£79.99
  • Multiple carry handles
  • Designed to carry two rifles
  • Single large external compartment

A gun bag designed to accommodate up to two full sized rifles, and all the tools required for them. With its 1000D Polyester construction and water proofing, this is the perfect case for those with multiple AEGs looking for a robust case to transport them.

£44.99
  • 100rnd Capacity
  • Clear polymer with mock 9x19 rounds
  • Compatible with SigAir MPX AEG

If you need to load up on MPX magazines you have found what you need! This 100rnd Mid Cap Magazine is designed for the SigAir/VFC MPX AEG and is a rattle free mid-cap design which holds 100 6mm BBs. The fill/feed port is located at the top of the magazine and it can be loaded using a standard Airsoft speed loader or loading tool.

This magazine design perfectly mimics that of the real thing, including its clear polymer body and detailed mock 9x19mm cartridges visible through the body. The sides, front and rear boast moulded in gripping texture to avoid potentially dropping or throwing the magazine during a reload in wet weather and these can do double duty as a makeshift grip for shooting in unconventional positions. On the left side of the magazine we are also treated to licenced trademarks, with "SIG SAUER 9x19" proudly displayed in recessed lettering. If one could call a magazine beautiful, it would be this one!

£19.99
  • Drop Leg Belt-Mount
  • Holster & Mag Storage
  • Ideal for MP5/MP7/MP9

A belt-mountable drop leg pouch for SMGs which features a large adjustable holster and 2 x long magazine pouches.

From £169.99
  • High density polymer construction
  • 6.03mm Tightbore inner barrel
  • 20mm Picatinny RAS handguard

If you're put off full metal SMG-5s because of their immense weight, this high density polymer alternative should suit you perfectly! The Golden Eagle SMG-5 A5 RAS replicates the iconic SMG design in its RAS configuration, with 20mm Picatinny rails at 3, 6 and 9 o'clock on the handguard, ready for your mission essential accessories. Up front, we have a QD flash hider mounted to a threaded tri-lug muzzle device, giving you loads of tracer and suppressor mounting options straight out of the box.

On the inside, the G.E SMG-5 is modestly equipped but surprisingly potent for the price. The internals are based around the Tokyo Marui SMG-5, meaning a version 2 gearbox, slider adjustable HOP-up unit and full compatibility with aftermarket TM spec upgrade parts. Improving on the original TM design,Golden Eagle has added 7mm ball bearing bushings into the mix for reduced friction, increased rate of fire and a smoother gearbox report. Another nice little sweetener is the platform's 6.03mm tightbore inner barrel which raises FPS and improves accuracy, saving you a few quid when it comes time to upgrade!

£13.99
  • Magazine Adapter
  • Fits SMG-5 Magazines
  • For NUPROL Fastloader

A Polymer constructed adapter for the NUPROL Fastloaders, which lets you refill SMG-5 series magazines rather than just M4 magazines. This is great news for anyone who runs an SMG-5 series Airsoft Gun and has a tonne of magazines that all need filling up before games. Or maybe you just don't like to carry spare magazines, and need the ability to quickly top up your mags on the move. Either way, if you have a NUPROL Fastloader and want to use it on something other than M4 magazines, you need one of these adapters.

£6.99
  • Advanced Design
  • Textured front to enhance grip
  • Brings your SMG-5 into the 21st century


If you are planning a modern SMG-5 build I have great news for you! You can ditch that dowdy old cocking handle and swap it out it with this ACR-esque modern replacement from CYMA. Made from sturdy Alloy and designed in a thoughtful way, featuring a lightening cut to keep weight down and grip surfaces where you need it, unlike the original. The CYMA extended cocking lever gives ergonomic advantages together with looking operator-af. Suits an M-LOK handguard perfectly!

£14.99
  • MOLLE Magazine pouch
  • Fabric outer with polymer inner retainer
  • Fits SMG magazines - Size adjustable

If you are looking for mag pouches with a gorgeous modern aesthetic, Novritsch has you covered! The MOLLE Open SMG Magazine Pouch is constructed with a fabric outer and a polymer inner retainer, meaning reinserting your mags has never been easier, nor has fast reloads! This pouch is size adjustable, and from our tests, we were able to conclude that SMG5, SMG7, UTR45, Scorpion EVO, ARP9/AR-9, PP-19, G& G MXC9/PCC45, UMP, MP5 and MP7 magazines all fit in nicely when adjusted.

The MOLLE Open SMG Magazine Pouch mounts to MOLLE webbing and also has MOLLE webbing on the front, meaning you can stack these pouches on top of each other if you need extra load-bearing capacity. Size adjustments are applied via the polymer toggle on the rear of the pouch, allowing you to fit the pouch perfectly to your specific SMG magazine and have the exact amount of retention you need to get the job done. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches will give your rig a modern look and have you performing at your peak!

£1.99
  • Replacement original parts
  • Front sling mount pin set
  • For CM.041 SMG-5 AEG series

The CYMA Front Sling Mount Pin for SMG-5 AEG is a replacement original part for the CM.041 SMG-5 AEG series and mounts to the front sight block to provide a sling loop on the left side. If your original sling loop is damaged or has gone missing, here is your replacement!

From £349.99
  • Full metal construction
  • Ambidextrous fire selector
  • Upgraded Platinum series - Even better than before!

If CQB is your poison, you are going to love this one! The CM.106A AR-9 from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106A sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

From £209.99
  • Full Metal construction
  • Ultra-compact SMG-5
  • High Torque motor with Neodymium magnets

If you are looking for a lil CQB monster AEG but shorty AR15's don't float your boat, the CM.041PDW is worth a look! Constructed from strong alloy in all the places the real one is, with a high torque motor and impressive performance right from the box, you can dominate the CQB field in a classier manner than ARP people with this classic PDW from Cyma. 

£9.99
  • CNC Aluminium construction
  • Scout tactical flashlight mount
  • For SMR-style attachment slots

If you're looking for a flashlight mount for your SMR-style handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is ideal. This mount is constructed from CNC aluminium with steel mounting hardware and designed to mount SF Scout (M300 and M600) flashlights to Geissele Super Modular Rail (SMR) style attachment slots.

The mount offers several mounting positions for your Scout Light, allowing for 3 different heights so you can get your accessories perfectly positioned. The mount also allows for mounting with a slight forward extension to defeat "suppressor shadow" or mounting at the rear to keep the light away from your muzzle, depending on how you install your Scout Light. This mount is only for standard SF M300 and M600 Scout Lights and won't fit the Scout Light Pro series due to its differing mount.

If you're in search of flashlight mounting solutions for the rare but super-slick SMR handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is what you need!

£34.99
  • Mounts to MP5K/SMG5K receiver 
  • Has both Picatinny and M-LOK slots
  • Robust Alloy construction with steel screws

One of the few problems with old-school cool like the SMG5K series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

£174.99
  • Foldable skeletonised stock
  • Lightweight and strong polymer construction
  • M-LOK rail system

Turn your boring SSG10 or VSR-10 sniper rifle into a futuristic-looking rifle from a galaxy far far away! The Novritsch SSG10 A3 Stock has a lightweight and skeletonised design, perfect for those who enjoy sniping but like to get a bit more stuck in and charge around the battlefield. There are a lot of practical features that come included with this stock, the stock is foldable for easier transport, the cheek rest is fully adjustable and the handguard features M-LOK rail sections on either side.

You will have to install this stock yourself, only attempt if you are confident in your ability and understanding. Do not attempt if you are unsure as it can lead to damage.

This stock creates a menacing image for your SSG10 or VSR-10 platform, with the Novritsch SSG10 A3 Stock you are sure to out-manoeuvre and out-class all those who dare to test you!

£3.99
  • Alloy construction
  • Pins for SMG-5 receiver
  • Compatible with CYMA SMG-5 AEGs

If you have been messing around with your SMG-5 AEG and you have lost your pins, CYMA has the cure! This original parts set includes 2 body pins, one for the trigger group and one for the rear receiver/stock. The pins are constructed from alloy and are compatible with CYMA SMG-5 AEGs but may also fit others, though we cannot guarantee it.

From £399.99
  • 6.01mm tightbore barrel
  • Pre-upgraded internals
  • Limited edition - Last of its kind

The original Novritsch sniper rifle, the SSG24 has been around since 2017 and its success is what brought us the wonderful selection of Novritsch platforms that we have available today. This is the last chance for sniper fans to get their hands on the sniper rifle that started it all, with only limited stock available, get your hands on a piece of history before its too late!

This SSG24 is an M24 platform decked out to the nines, taking the original shell but installing state-of-the-art internal parts, meaning this rifle needs no further tuning or modifications, it's already a beast. It is a no-compromise rework of the OG sniper rifle that we all fell in love with Novritsch because of.

Sporting a 6.01 precision tightbore barrel for pinpoint accuracy and a satisfying pop with every shot, this sniper is crafted to perfection, with a suave alloy fluted outer barrel and superbly textured lightweight glass fibre reinforced polymer body, finished with a comfortable rubberised butt plate for a sniper that shoots and handles like an absolute dream.

From £139.99
  • High density polymer construction
  • 6.03mm Tightbore inner barrel
  • Sneaky SMG-5 variant

If you're looking for a lightweight beginner platform and you like sneaky SMGs, this is the one to go for! The Golden Eagle SMG-5 SD6 AEG Submachine Gun Replica is styled after an iconic SMG design we all know and love, constructed from high density polymer so you can run around all day without feeling the burn.

While it may be cheap, the Golden Eagle SMG-5 SD6 doesn't compromise on build quality, being constructed from strong high-density polymer with a matt finish indicative of fibre reinforcement with an aluminium suppressor at the front. Inside, you will find an alloy version 2 gearbox with full Tokyo Marui compatibility, boasting 7mm ball-bearing bushings for a smoother gearbox sound. A 6.03mm tightbore inner barrel is also present, a nice bonus to squeeze a bit more accuracy and FPS out of the platform. If you want a suppressed subgun to match your sneaky playstyle, the Golden Eagle SMG-5 SD6 fits the bill but won't break the bank!

£13.99
Was £19.99
Save £6.00
  • For SMG-7 AEP
  • 50rnd Capacity
  • Tokyo Marui High Quality

A 6mm BB Airsoft magazine, designed for use with Tokyo Marui's SMG-7 AEP electric Airsoft Submachine gun, featuring a medium capacity of 50 rounds. 

From £269.99
  • Uses MP5/SMG-5 AEG Magazines
  • Version 2 gearbox - Quick Change Spring guide
  • SBR Style AR Receiver - MP5/M4 Hybrid design

The King Arms 9mm SBR AEG is based on recent developments in the world of pistol calibre carbines and SMGs in the firearms world, hybridizing the ergonomics and modularity of the M4/AR15 platform with the more compact magazines of 9mm SMG platforms.

The 9mm SBR feeds from MP5/SMG-5 AEG magazines and follows the M4/AR15 in the layout of its controls, giving AR users the option to run an SMG which is very similar to their assault rifle, meaning less training to master the new platform and less chance of "training scars" causing confusion mid firefight. If you are stuck for choice between an M4 AEG and an SMG-5, why not get both in one?

£184.99
  • Superior ergonomics
  • M-LOK rail space
  • Compatible with other VSR-10 variants

The Novritsch SSG10 A2 Stock will completely transform your SSG10 or VSR 10 sniper rifle. The stock and chassis have plentiful features that will elevate your gameplay both in terms of ergonomics and aesthetics. It fits the SSG10 A1 receiver without and adjustments need to be made. It also fits other VSR-10 platforms but requires you to remove the hop-up block plate from your VSR-10 rifle first before installing the stock.

You will need to manually install this part, only those who are absolutely confident in their abilities should attempt to install this stock. 

Uplift your sniper rifle and give it a realistic and comfortable feel with this SSG10 A2 Stock, being a sneaky sniper has never been more appealing!

From £489.99
  • Fully Licensed
  • VFC Avalon Gearbox
  • Quick Change Spring

This Airsoft Electric Gun is built to a stunning standard under full license from Sig Sauer, made by VFC with the Avalon Gearbox. Not only do you get a rock solid exterior, but a quick change spring system, steel tooth piston and rotary HOP Unit are a short list of what awaits inside.