All Airsoft Assault Rifles

Airsoft JG (Jing Gong) AR36C with a folding stock changes from the perfect close quarter battle weapon to the outdoor firefight, with an airsoft battery and charger the JG AR36C is ready to go out the box and with such a perfect service history you can see why!

Whether you're fresh to the sport, seeking a solid beginner primary, or you need a lightweight, affordable backup AEG, the Specna Arms SA-F10 FLEX™ M4A1 AEG; X-ASR MOSFET will see you kitted out! This FLEX™ line build is made almost entirely from robust high-density polymer with an alloy outer barrel and trim parts, keeping the build more affordable, agile and resistant to scratches than comparable metal builds.

Inside, the SA-F10 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F10, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. While it may be a cheap platform, Specna has definitely given us the good stuff inside!

A highly adaptable platform which can be upgraded and modified to suit any tastes in the future, the SA-F10 makes a perfect entry point into Airsoft for the future skirmisher who doesn't want to be fixed to one configuration. Ideal for a US Army loadout or an Airsofter bitten by the customisation bug, the Specna Arms SA-F10 FLEX™ M4A1 AEG; X-ASR MOSFET is ready to face whatever challenge you set for it!

Whether you're fresh to the sport, seeking a solid beginner primary, or you need a lightweight, affordable backup AEG, the Specna Arms SA-F10 FLEX™ M4A1 AEG; X-ASR MOSFET will see you kitted out! This FLEX™ line build is made almost entirely from robust high-density polymer with an alloy outer barrel and trim parts, keeping the build more affordable, agile and resistant to scratches than comparable metal builds.

Inside, the SA-F10 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F10, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. While it may be a cheap platform, Specna has definitely given us the good stuff inside!

A highly adaptable platform which can be upgraded and modified to suit any tastes in the future, the SA-F10 makes a perfect entry point into Airsoft for the future skirmisher who doesn't want to be fixed to one configuration. Ideal for a US Army loadout or an Airsofter bitten by the customisation bug, the Specna Arms SA-F10 FLEX™ M4A1 AEG; X-ASR MOSFET is ready to face whatever challenge you set for it!

Need the MK18 look in a lightweight, cost-effective package? The EMG Daniel Defense® MK18 MOD.1 Sports Line AEG; ETU Version has your name on it! Constructed predominantly from high-density polymer with an alloy outer barrel and a mix of alloy and steel trim parts, this detailed MK18 MOD.1 replica is licensed by Daniel Defense via EMG, providing authentic trademarks to complete the realistic look.

On the inside, the EMG MK18 Sports Line features an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. The inner barrel is also a 6.02mm tightbore example, promising above-average accuracy potential when used with high-quality BBs. Also present is an in-line MOSFET and low-resistance wiring, giving it impressive electrical efficiency, which translates to a super snappy trigger response in semi-auto.

If a MK18 will be your next buy but you're on a tight budget or want to keep your in-game agility, this is the one to go for. Packing licensed trademarks, rock-solid externals, TM-compatible internals and some potent internal parts straight out of the box, you won't find a better MK18 than the EMG Daniel Defense® MK18 MOD.1 Sports Line AEG; ETU Version in this price range!

If you like British military rifles, you'll love the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG! This lightweight, affordable rifle has clearly been inspired by the real steel L403A1/KS-1, the rifle recently issued to the British Royal Marines. This Delta rifle is slightly shorter than that, closely resembling the KS-3, though for the price, it makes the perfect stand-in if you're looking for a modern military loudout.

The DA-C09 is equipped with a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you like British military rifles, you'll love the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG! This lightweight, affordable rifle has clearly been inspired by the real steel L403A1/KS-1, the rifle recently issued to the British Royal Marines. This Delta rifle is slightly shorter than that, closely resembling the KS-3, though for the price, it makes the perfect stand-in if you're looking for a modern military loudout.

The DA-C09 is equipped with a 6.03mm tightbore inner barrel paired with a rotary HOP-up, offering superb performance at long range and the ability to tune for different ammo weights. If you're after a low-cost, high-performance M4/AR-15 platform which is ready to rock with the most modern accessories, the Delta Armory DA-C09 CHARLIE™ 10" M-LOK M4/AR-15 AEG is one to watch!

If you don't like to waste energy lugging a full metal platform around but want high performance, pre-upgraded internals, the Delta Armory CHARLIE™ ETU range was conceived with you in mind. This is the DA-C04-ETU M4/AR-15 KeyMod AEG, based externally on the original DA-C04 but kitted out internally with Delta's APLHA™ ETU internals.

Inside, we are treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The Delta Armory programmable ETU/MOSFET system is also present, offering super snappy trigger response, improved rate of fire and the ability to program the fire controls for burst mode and binary trigger. Whether you're new to skirmishing and want a pre-upgraded platform that can tangle with the best, or you're a veteran who likes to fight easy, the DA-C04-ETU CHARLIE™ M4/AR-15 KeyMod AEG is the ideal addition to your Airsoft armoury!

If you prefer shorter AR platforms and want something full metal with a realistic weight, the Delta Armory DA-A13 ALPHA™ 8" M-LOK M4/AR-15 AEG is one of the best options out there. Equipped with an M-LOK handguard constructed from CNC machined aluminium, the unique Delta Armory receiver, an ergonomic pistol grip and a pre-installed aluminium angled foregrip, you have little left to do on the outside other than add your favourite optic!

Inside, we're also remarkably well-equipped! Inside, we have a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving you impressive performance and advanced features for a respectable price point. If you like your ARs as cutting edge on the inside as they are on the outside, the Delta Armory DA-A13 ALPHA™ 8" M-LOK M4/AR-15 AEG should suit you perfectly!

If you want the gucci look but you don't want to part with those gucci bucks, Double Bell has something you may like! The BY-817 M-416 A5 AEG is styled to match a certain real-world rifle we all know and love and boasts full metal construction, fantastic attention to detail and pre-upgraded internals including a 6.03mm tightbore inner barrel, reinforced steel gears and a quick change spring system for easy power tuning.

As with the latest iteration of the real rifle, the Double Bell AEG is also rocking a full set of ambidextrous controls, making this a fantastic platform for left-handed shooters and those who use shoulder-to-shoulder transitions to make the best use of surrounding cover. Whether you run a special forces loadout or you are looking for a lefty-friendly AR platform with an elite look, the Double Bell M-416 A5 should suit you perfectly!

If you're looking for a mid-length AK with the robust and realistic feel of steel, the Evolution Airsoft E-104 would be a great choice. As part of Evolution Airsoft's "Hard Core" range, this AK sports full metal construction with a large proportion of steel in its build, an alloy adjustable HOP-up unit and a well-equipped version 3 gearbox bristling with upgraded parts. 

The E-104 replicates the real steel AK-104/105 with its 12-inch barrel and comes with a side folding skeleton stock, meaning you can shorten the rifle easily for carry or close-quarters work. For an AK that can do it all, you cannot go wrong with the E-104!

Attention all sneaky skirmishers! The Specna Arms SA-A07 ONE™ M4/AR-15 AEG; Kestrel Basic ETU is exactly what you are looking for, with its integral suppressor, it really doesn't get more covert than this. This platform also boasts full metal construction, making it hardwearing and sure to last in even the roughest of skirmishing conditions.

Inside the Specna Arms SA-A07 ONE™, there are some incredible straight-out-of-the-box internals. It features a Kestrel Basic ETU, 18:1 ratio steel gears running on 8mm ball bearing bushings and a reinforced gearbox shell with an Enter & Convert™ quick change spring guide. This allows you to change the spring without having to open the gearbox itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

If you are in the market for a 7.62x51 style AEG but you want something unique, the EC-909 LR OBR is calling your name! This AEG boasts full metal construction with an absolutely gorgeous matt black anodised finish applied and is set up out of the box for DMR duty thanks to its quick change spring system, in-line MOSFET and semi-auto locked fire controls. 

On the inside, we are treated to more than our fair share of pre-upgraded internals, especially at this price! A 6.04mm tightbore inner barrel coupled with a TM-compatible rotary HOP-up unit gives the EC-909 the range and accuracy to duke it out with the best. The steel gearset runs on 8mm ball bearing bushings to reduce stress on the gearbox shell and reduce friction, allowing for higher power springs to be installed while remaining within the parameters set by the manufacturer. The gearbox is a version 2 long (sometimes known as version 2.5), meaning greater cylinder volume which is ideal for longer inner barrels. If you want a DMR that looks like nothing else you can buy or build yourself, the EC-909 is the one!

If American AKs are your thing, this one is definitely for you! The EMG Rifle Dynamics RD-704P AEG; Kestrel Basic ETU is packed full of pre-upgraded internal parts and features genuine trademarks from firearm company Rifle Dynamics. If you have shot a CYMA Platinum Edition rifle before, you can imagine how absolutely devasting in-game this rifle will be. To make matters sweeter, it is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery.

The tracer HOP-up is a rare addition to stock Airsoft rifles, usually a rare innovation only found on the aftermarket and requiring a certain amount of expertise to wire in. An impressive feature made even better in combination with this RD-704P's other upgraded parts and flawless build quality. The RD-704P boasts full metal construction with a large proportion of steel in the build, a 6.03mm tightbore inner barrel, a high-speed Neodymium magnet motor and much, much more!

So, if you're in the mood for an AK platform, the EMG Rifle Dynamics RD-704P AEG is a great high-performance option, plus, it has the added bonus of lighting up tracer BBs without an aftermarket tracer unit required!

If you're after an ultra-modern full metal AR build packed with pre-upgraded goodies, the Specna Arms SA-P28 PRIME™ Daniel Defense® RIII™ 12.5'' M4/AR-15 AEG should be right up your street! This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs. They have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET!

If you're sick of upgrading AEGs and want something that shoots flawlessly straight out of the box, the Specna Arms SA-P28 PRIME™ Daniel Defense® RIII™ 12.5'' M4/AR-15 AEG is perfect for you! Why not save yourself the hassle of fiddling with internal parts and save that energy for game day?

If you have a thing for modernised AKs, you'll love this! The CYMA Platinum SLR Airsoft Works AK-105 AEG is absolutely packed with pre-upgraded parts and is officially licenced by SLR Rifleworks with detailed replicas of SLR parts across the design. This modernised AK-105 is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery. This means you can light the enemy up with tracer BBs without adding any extra length or weight to your gun, adding in a rare innovation usually only found on the aftermarket and requiring a certain amount of expertise to wire in. Inside the V3 gearbox, it gets even better!

With pre-installed 13:1 high speed CNC steel gears, a CNC aluminium piston head and cylinder head, a high torque Neodymium magnet motor and a 6.03mm tightbore inner barrel, there is practically nothing left to upgrade on this beast! Also inside this, the latest version of the SLR AK-105 we are treated to the EShooter Kestrel Basic ETU, offering 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Make no mistake, this beast is even more kitted out than the previous version!

If you held off on the original SLR AK-105 from CYMA, the EShooter Kestrel Basic ETU version will make you glad you waited! Retaining all the best bits of the original but with advanced functionality added, the CYMA Platinum SLR Airsoft Works AK-105 AEG; Kestrel Basic ETU is a real killer on the field!

If you like thunderous recoil and maximum realism, you'll love the WE AKS-74U GBBR! This full metal beast is built with a high proportion of steel and is one of the hardest recoiling GBBRs out there, thanks to its hefty full-sized bolt carrier complete with a detailed mock long stroke piston system. WE has really gone the extra mile when it comes to realism; pop open the hinged top cover and you'd be hard pressed to tell this apart from a real AK!

In terms of realism, this AK is hard to beat, feeding from 30-round real-cap magazines which provide both a "dry-fire" mode and a more realistic "stop firing on empty" mode, giving you the dead man's click when it's time to reload, just like a real AK. Internally, this updated WE AKS-74U also features a 6.04mm tightbore inner barrel, providing an advantage in accuracy and a slight increase in FPS from the same power gas, though it shares internal parts with the previous generation and is ready for aftermarket upgrades.

If you're expanding your GBBR arsenal and need to fill an AK-shaped hole, the WE AKS-74U GBBR is one to watch. A fantastic replica, both inside and out, with frightening recoil force and a genuinely intense firing experience, this "Krinkov" is a violent little menace!

If you're an AK kinda guy but want to stay light on your feet, the Specna Arms SA-J73 CORE™ HAL¹ ETU AK-105 AEG is your ideal primary! A revamped version of the original SA-J73, the HAL¹ ETU version keeps the best bits and adds some innovative new parts into the mix, with the HAL¹ programmable MOSFET taking centre stage.

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Also added to the updated SA-J73 is a new rotary AK HOP-up unit design, bringing rotary performance to the table to keep pace with ARs! Like the original SA-J73, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

If you're an operator on a budget and need an agile AK with advanced internals, the SA-J73 is exactly that. Rock solid despite its polymer build and kitted out on the inside with goodies you'd never expect at this price, you're in good hands on the field with the Specna Arms SA-J73 CORE™ HAL¹ ETU AK-105 AEG at your side!

If you're a CQB specialist or a fast-moving outdoors skirmisher seeking an M4 platform with a sneaky aesthetic, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG is one to watch. Being an AEG of Delta's ALPHA™ line, this beast boasts a CNC aluminium quad-rail handguard, aluminium suppressor and the unique Delta Armory billet-style receiver, giving it a cutting-edge, brutal look with plenty of accessory options built in.

Inside, you will find the usual complement of Delta Armory pre-upgraded internals, including a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. The 18:1 ratio steel gearset runs on 7mm ball bearing bushings, reducing gearbox noise and friction.

Focussing on long-term reliability, the DA-A04's internals are well suited to new skirmishers or experienced Airsofters looking for a reliable backup or starting point for a custom build. If this sounds like you, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG will serve you well!

The Double Eagle M90 range presents an innovative & unique range of AR-15 / M4 Airsoft replicas to the market, offering an inimitable exterior build quality with advanced next-gen internals and adorned with the latest in modern firearm furniture, so get your NODS on, it's about to get operator AF up in here.

If you're into the "Honey Badger" look, the CYMA Platinum CM.097D M4/AR-15 SD AEG; Kestrel Basic ETU will definitely please you! Boasting full metal construction and an integral suppressor surrounded by a CNC aluminium M-LOK handguard, the CM.097D is rocking all the superb pre-upgraded components CYMA's Platinum series is known for with a more compact form and stealthy styling, ideal for CQB or fast moving, clandestine skirmishers!

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off!

With top tier pre-upgraded internals and solid externals with a cutting edge aesthetic, the CM.097D is a beast in all aspects and its compact size lends itself well to fast moving, aggressive playstyles and close quarters environments. If you need a modern, full metal AR which will never need upgrading, the CYMA Platinum CM.097D M4/AR-15 SD AEG; Kestrel Basic ETU is the one to go for!

If you dream of a DMR build which doesn't make your arms burn, the EMG Barrett REC10® AEG; Kestrel Basic ETU is the base platform you need! Made from strong high density polymer and bristling with licensed Barrett trademarks, the REC10® is the REC7's big brother, feeding from 7.62x51mm style magazines for that beastly DMR look.

The REC10® is internally based on the version 2 long gearbox, offering larger air volume than a standard V2 to cope with longer barrel lengths. The inner barrel is a 6.03mm tightbore example, enhancing efficiency and providing an accuracy edge with high-grade BBs. Also inside is the Kestrel Basic MOSFET/ETU from EShooter, offering programmable options such as adjustable pre-cocking, 3-round burst and binary trigger, along with a host of quality of life improvements.

A cutting-edge AR-10 platform currently serving with the Israeli Special Forces in real steel form, the EMG REC10® makes a great base platform for a DMR build, especially for those with a mobile playstyle. If you're into DMRs but don't want a primary which weighs 6KG when kitted out, the EMG Barrett REC10® AEG; Kestrel Basic ETU is the perfect starting point for your build!

If you dream of a DMR build which doesn't make your arms burn, the EMG Barrett REC10® AEG; Kestrel Basic ETU is the base platform you need! Made from strong high density polymer and bristling with licensed Barrett trademarks, the REC10® is the REC7's big brother, feeding from 7.62x51mm style magazines for that beastly DMR look.

The REC10® is internally based on the version 2 long gearbox, offering larger air volume than a standard V2 to cope with longer barrel lengths. The inner barrel is a 6.03mm tightbore example, enhancing efficiency and providing an accuracy edge with high-grade BBs. Also inside is the Kestrel Basic MOSFET/ETU from EShooter, offering programmable options such as adjustable pre-cocking, 3-round burst and binary trigger, along with a host of quality of life improvements.

A cutting-edge AR-10 platform currently serving with the Israeli Special Forces in real steel form, the EMG REC10® makes a great base platform for a DMR build, especially for those with a mobile playstyle. If you're into DMRs but don't want a primary which weighs 6KG when kitted out, the EMG Barrett REC10® AEG; Kestrel Basic ETU is the perfect starting point for your build!

If you dream of a DMR build which doesn't make your arms burn, the EMG Barrett REC10® AEG; Kestrel Basic ETU is the base platform you need! Made from strong high density polymer and bristling with licensed Barrett trademarks, the REC10® is the REC7's big brother, feeding from 7.62x51mm style magazines for that beastly DMR look.

The REC10® is internally based on the version 2 long gearbox, offering larger air volume than a standard V2 to cope with longer barrel lengths. The inner barrel is a 6.03mm tightbore example, enhancing efficiency and providing an accuracy edge with high-grade BBs. Also inside is the Kestrel Basic MOSFET/ETU from EShooter, offering programmable options such as adjustable pre-cocking, 3-round burst and binary trigger, along with a host of quality of life improvements.

A cutting-edge AR-10 platform currently serving with the Israeli Special Forces in real steel form, the EMG REC10® makes a great base platform for a DMR build, especially for those with a mobile playstyle. If you're into DMRs but don't want a primary which weighs 6KG when kitted out, the EMG Barrett REC10® AEG; Kestrel Basic ETU is the perfect starting point for your build!

If you're looking for a modern AR platform packed with pre-upgraded parts, the Specna Arms SA-P22 PRIME™ MK16 M-LOK M4/AR-15 AEG is exactly that. A high-quality full metal build on the outside with a sleek M-LOK handguard, 20mm Picatinny railed receiver and Specna Arms SAAS angled foregrip pre-installed, the SA-P22 is equally impressive on the inside, equipped with Specna's top-of-the-range internals, which are even better than the previous EDGE 2.0 lineup!

The PRIME™ range is Specna's newest line of AEGs. Taking traditional AEG silhouettes, Specna has revamped the internals with a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is the option to choose either the Gate ASTER II™ Bluetooth MOSFET or the HAL MOSFET, substantially improving trigger response and offering programmable firing modes. Which you choose depends on your needs; the ASTER II™ is ideal for the skirmisher seeking a plethora of advanced functions, and the HAL version is great for users who prefer an easier-to-use yet still advanced MOSFET.

If you're not the type to delve into Airsoft internals but you still want top tier performance, Specna's PRIME™ range was made with you in mind. With a brushless motor, programmable MOSFET, upgraded HOP-up unit and stainless steel tightbore under the hood, you'll never need to upgrade SA-P22 PRIME™ MK16 M-LOK M4/AR-15 AEG!

If you've been holding your breath waiting for KRYTAC's MK3 line to drop, you can breathe a sigh of relief! The KRYTAC EMG BARRETT REC7 MK3 Carbine AEG is the latest REC7 platform release, maintaining the incredible external build quality which made them the base platform for Bolster Armouries incredible ONYX with newly refined internals to squeeze even more performance from KRYTAC's proven components!

If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

If you're working on an old-school-cool build or need a simple and solid starter platform which can be modified to suit almost any battlefield need, the Specna Arms SA-F11 FLEX™ M4/AR-15 CQBR; X-ASR MOSFET should be on your radar. A predominantly high-density polymer build with an alloy outer barrel and trim parts, the SA-F11 makes a great starting point for a custom build, keeping costs low so you can kit her out as you see fit.

Inside, the SA-F11 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F11, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. That's a lot of gun for not a lot of money!

Whether you need a cheap backup or loaner AEG or want to get into the sport with a proven platform with plenty of future upgrades and customisation options, the SA-F11 FLEX™ M4/AR-15 CQBR; X-ASR MOSFET is a great option. Ideal for military-style builds but truly living up to the real steel AR-15's nickname "barbie for men", the sky is the limit when it comes to kitting this CQBR out!

If you're working on an old-school-cool build or need a simple and solid starter platform which can be modified to suit almost any battlefield need, the Specna Arms SA-F11 FLEX™ M4/AR-15 CQBR; X-ASR MOSFET should be on your radar. A predominantly high-density polymer build with an alloy outer barrel and trim parts, the SA-F11 makes a great starting point for a custom build, keeping costs low so you can kit her out as you see fit.

Inside, the SA-F11 is well equipped, based around the prolific version 2 gearbox with an alloy shell, steel 18:1 ratio gears, 8mm bushings and the ESA quick change spring system for easy power tuning. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive accuracy and range along with an FPS boost from the tighter barrel's improved air efficiency. This, the latest version of the SA-F11, is also equipped with the Gate X-ASR smart fuse MOSFET, providing diagnostics and a snappier trigger feel while eliminating trigger lock-ups in semi-auto. That's a lot of gun for not a lot of money!

Whether you need a cheap backup or loaner AEG or want to get into the sport with a proven platform with plenty of future upgrades and customisation options, the SA-F11 FLEX™ M4/AR-15 CQBR; X-ASR MOSFET is a great option. Ideal for military-style builds but truly living up to the real steel AR-15's nickname "barbie for men", the sky is the limit when it comes to kitting this CQBR out!

If you're after an Airsoft AEG with an iconic military look, the Specna Arms SA-C03 CORE™ HAL¹ ETU M4A1 AEG is a great budget-friendly option! A detailed replica of the US Army's M4A1 rifle, the SA-C03 is made predominantly from high density polymer with an alloy outer barrel and CNC aluminium handguard, resulting in a lightweight build with strength and accessory compatibility where it counts!

This, the latest version of the SA-C03 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the already respectable original SA-C03. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.

Whether you're after a low-cost, versatile base gun for a custom build or a US Army primary for an unbeatable price, the Specna Arms SA-C03 CORE™ HAL¹ ETU M4A1 AEG is ideal. Ready to be dressed up like the real thing with plenty of accessory options, including the M203 Grenade launcher, this M4A1 is adaptable and authentic in equal measure!