- Checked texture
- 140rnd Capacity
- For M4/AR15/SCAR-L/416 AEGs
For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!
Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.
The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.
- Checked texture
- 140rnd Capacity
- For M4/AR15/SCAR-L/416 AEGs
For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!
Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.
The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.
- Unique hex design
- Lightweight & tough
- 140rnd Capacity
A medium capacity spring fed magazine that replicates a real world mag that's incredibly popular with civilian shooters. The magazine has a tough high quality Polymer exterior that feels great in the hand thanks to the unique hex cut out design, and the ridges that run up the length of the front and back of the magazine.
Holding 140rnd , the mag is a mid-cap type, meaning there is no rattle in comparison with hi-cap magazines and is filled using a speed loader at the top. If you need a high quality magazine that meets your demands, want a unique design to finish off that modern-era rifle or simply want to carry more ammunition in the field without annoying rattle sounds - you can count on these magazines.
- 370rnd capacity
- Modern polymer mag style
- For M4/AR15 AEG rifles
Nuprol are back with a fresh mag design. This magazine holds 380 rounds and is designed for the M4/AR15 AEG but should work in most compatible STANAG platforms and has an ultra-modern look thanks to its ridged and stippled texture pattern. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body.
Either side of the magazine has ridged extrusions to provide extra grip when pulling the magazine from a pouch and the stippled texture only adds to the grippage. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look!
- Unique hex design
- Lightweight & tough
- 140rnd Capacity
A medium capacity spring fed magazine that replicates a real world mag that's incredibly popular with civilian shooters. The magazine has a tough high quality Polymer exterior that feels great in the hand thanks to the unique hex cut out design, and the ridges that run up the length of the front and back of the magazine.
Holding 140rnd , the mag is a mid-cap type, meaning there is no rattle in comparison with hi-cap magazines and is filled using a speed loader at the top. If you need a high quality magazine that meets your demands, want a unique design to finish off that modern-era rifle or simply want to carry more ammunition in the field without annoying rattle sounds - you can count on these magazines.
- 120 Round Capacity
- Modern Styled Design
- Moulded Polymer Magazine
An Airsoft Medium Capacity Magazine that is ideal for the Airsofter wanting to inject a little more realism into their Skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.
- Variable magazine
- 30/130 round capacity
- High density polymer
Arcturus brings us a modern variable capacity magazine for your M4/M16 AEG platform. Holding a choice of 30 or 130 rounds and constructed from high density, lightweight polymer. The magazine features mod cons such as textured finish, ridged edges and ridged baseplate.
- Variable magazine
- 30/130 round capacity
- High density polymer
Arcturus brings us a modern variable capacity magazine for your M4/M16 AEG platform. Holding a choice of 30 or 130 rounds and constructed from high density, lightweight polymer. The magazine features mod cons such as textured finish, ridged edges and ridged baseplate.
- 30rnd Capacity
- Green gas magazine
- Fits CYMA CGS & TM ZET M4/AR-15 GBBR
If you want some awesome realistic-looking mags and you're running a CGS or TM MWS system GBBR, fill your rig with these! The EMG 30rnd Magazine for CGS & MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui MWS system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the bottom of the polymer Lancer Systems L5 AWM Magazine style body.
This mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM MWS and CYMA CGS GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs.
- 1000rnd Capacity
- Auto/sound winding
- For M4/AR15 AEG platform
The 1000rnd Dual Magazine for M4/AR-15 AEG is a great tool for those with a heavy trigger finger but who like to look as tactical as possible! This is an Electric Drum Magazine for M4/AR15 AEG platform Airsoft guns and is constructed from high-density polymer and steel to keep things extremely durable and also lightweight to maintain manoeuvrability.
This magazine accepts a 9V battery (not included) and will constantly wind BBs through the mechanism when the switch is set to "wind" and will wind only when the AEG is fired when using the "sound control" mode. If you aren't sure whether a Support Gun is for you, this mag allows you to sample the role without taking the plunge on a proper LMG!
- Alloy/CNC alu construction
- For Tokyo Marui & CGS M4/AR-15 ZET GBBRs
- Fits standard M4/AR-15 AEG magazines
If you're planning on running your GBBR through winter or fancy mag dumping like it's going out of fashion without the dreaded "cooldown" effect, the Army Armament HPA P30 Adapter for M4/AR-15 AEG Magazines; CGS/MWS System is what you need!
A collaborative project between Army Armament and T8 Systems, this HPA adapter is designed for the Tokyo Marui M4/AR-15 ZET System and the CYMA CGS M4/AR-15 GBBR series, allowing standard AEG mags to be used along with a High Pressure Air (HPA) power source. The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter.
The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're already running HPA you probably have all the bits to make this work already and experience shoulder-thumping recoil through the frosty months!
- Check and dot pattern texture
- 150rnd Capacity
- For M4/AR15/SCAR-L/416 AEGs
For those of you looking for an ultra-modern styled mid cap, this is the one you're after!
Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.
The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.
- 30rnd Capacity
- Steel shell, polymer/alloy internals
- For M4 mag compatible WE Open Bolt GBBRs
If you're running a WE GBBR, whether it's the SCAR-L, L85/SA80, Type 91, Keltec PLR-16, KAC PDW or M4 variant, this is the one mag you need to keep them all well-fed! Constructed with a steel shell, alloy/polymer internals and brass valves, this magazine is designed for WE Open Bolt GBBRs and holds 30 BBs filled through the feed lips, either with a speed loader or by hand. This V3 version has been refined to improve the reliability and consistency, to ensure your replicas feed perfectly every time.
With wide compatibility and a strong but relatively light build, these magazines even allow you to switch off the "bolt lock" function using the catch on the top, meaning you can dry fire for a laugh or to practice weapons handling without holding the bolt catch while doing it. Compatibility-wise, these are strictly for WE Open Bolt GBBR rifles but will work in any WE Open Bolt GBBR which takes STANAG-style mags.
- 1200rnd Capacity
- Autowinding drum magazine - M style shell
- For Tokyo Marui Next Gen Recoil Shock M4/416/SCAR-L
Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss!
Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.
- 380rnd Capacity
- Windowed mag design
- For Airsoft M4/AR15 AEG rifles
If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. This hi-cap magazine holds 380 BBs and is loaded through its feed window, located on the top of the magazine body. This magazine is constructed from strong polymer, while still being lightweight, so you can carry more mags and still run round the field with ease. This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the winding gears.
- 320rnd Capacity
- Windowed mag design
- For Airsoft M4/AR15 AEG rifles
If you need magazines but you also want to add a more modern look to your M4/AR15 the NUPROL W-Mag would be a great choice.
This magazine holds 320 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.
Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer.
This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see your BBs and with the dot texture, this mags gives a modern look to any Airsoft M4/AR15 AEG.
- 30rnd Capacity
- Green gas/HPA magazine
- Fits CYMA CGS & TM ZET M4/AR-15 GBBR
If you want a magazine for every season and you're running a CGS or TM ZET system GBBR, get one of these! The CYMA 30rnd Green Gas/HPA Gas Magazine for CGS/MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and has a green gas fill valve and a HPA line attachment point on the rear of the STANAG style body.
The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs.
To use this magazine with HPA lines, instead of swapping the whole magazine when out of ammo, you can purchase separate quick-detach BB tubes. By pulling the tab rearwards on the bottom of the magazine you can remove the internal BB tube and then insert another one. This means that you can carry way more BBs without the hassle of large magazines occupying your rigs!
Whether you feel like using gas or HPA, this magazine has you covered for all occasions and is the perfect all-year-round gas magazine, just make sure to get some separate BB tubes if you plan on using HPA!
- 130rnd Capacity
- 7.62x39mm Style AR magazine
- Compatible with most M4/AR-15 AEGs
If you are running the Double Eagle DEK762 and you want mags that match the original, you just found them! The Double Eagle 130rnd 7.62x39 Style Mid-Cap Magazine for M4/AR-15 AEG is styled after real steel 7.62x39mm AR magazines, making it a perfect fit for the DEK762 but also compatible with most M4/AR-15 AEGs.
The magazine is constructed with a steel shell, polymer internals and a steel feed spring, showcasing mock reinforcement ribs stamped into each side. This mag is also quite short for a 130-round mag, allowing you to get closer to the ground when shooting from the prone position and make better use of surrounding cover. As with other Airsoft mid-caps, the 7.62x39 style magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Whether you own the DEK762 or you want to add an unconventional look to your M4/AR-15 AEG, this mag is perfect for the job!
- 140rnd Capacity
- Mid-cap magazine - No battle rattle
- Compatible with most M4/AR-15 AEGs
If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check these out! The A&K 140rnd Steel Mid-Cap Magazine is designed to fit M4/AR-15 AEGs. It is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need affordable M4 mags to complete your loadout, this is a great one to consider!
Authentic to the real world STANAG magazine, this has been constructed with heavyweight alloy steel for a more hefty and realistic feel than your average Airsoft magazine. It is of Medium capacity and holds 140 rounds, it features a spring-loaded follower, guaranteeing consistent feeding so your Airsoft replica is unlikely to misfeed.
- 30rnd / 120rnd Switch
- ERG System Magazine
- Dupont™ Zytel Polymer
Buy a triple pack and save some money in the meantime! The latest PTS Enhanced Polymer Magazine that allows you to switch from a 30rnd to 120rnd capacity within a split second from the underside of the magazine! The most robust magazine on the market, a must for anyone seeking realism and reliability.
- 380rnd Capacity
- High density polymer construction
- Compatible with most M4/AR-15 AEGs
If you need more ammo on tap and ain't got time to reload, the Specna Arms 380rnd S-Mag High-Cap Magazine for M4/AR-15 AEG is what you need to fill your rig up! This wheel-wound high-cap magazine holds a respectable 380 BBs, loaded through the fill window at the top and fed into your M4/AR-15 AEG via the winding wheel on the baseplate. Simply open the BB fill window door, pour your BBs in and wind the wheel 10-15 times, after which you are ready to shoot.
Like the S-Mag mid-cap, the high-cap variant is constructed from high density polymer and boasts SA texture on each side to improve wet weather handling. If you want to spend more time shooting and less time reloading, the S-Mag high-cap will perfectly suit your needs!
- 380rnd Capacity
- High density polymer construction
- Compatible with most M4/AR-15 AEGs
If you need more ammo on tap and ain't got time to reload, the Specna Arms 380rnd S-Mag High-Cap Magazine for M4/AR-15 AEG is what you need to fill your rig up! This wheel-wound high-cap magazine holds a respectable 380 BBs, loaded through the fill window at the top and fed into your M4/AR-15 AEG via the winding wheel on the baseplate. Simply open the BB fill window door, pour your BBs in and wind the wheel 10-15 times, after which you are ready to shoot.
Like the S-Mag mid-cap, the high-cap variant is constructed from high density polymer and boasts SA texture on each side to improve wet weather handling. If you want to spend more time shooting and less time reloading, the S-Mag high-cap will perfectly suit your needs!
- 380rnd Capacity
- High density polymer construction
- Compatible with most M4/AR-15 AEGs
If you need more ammo on tap and ain't got time to reload, the Specna Arms 380rnd S-Mag High-Cap Magazine for M4/AR-15 AEG is what you need to fill your rig up! This wheel-wound high-cap magazine holds a respectable 380 BBs, loaded through the fill window at the top and fed into your M4/AR-15 AEG via the winding wheel on the baseplate. Simply open the BB fill window door, pour your BBs in and wind the wheel 10-15 times, after which you are ready to shoot.
Like the S-Mag mid-cap, the high-cap variant is constructed from high density polymer and boasts SA texture on each side to improve wet weather handling. If you want to spend more time shooting and less time reloading, the S-Mag high-cap will perfectly suit your needs!
- 380rnd Capacity
- Polymer construction
- High-cap for M4/AR15 AEG
If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.
The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.
- 380rnd Capacity
- Polymer construction
- High-cap for M4/AR15 AEG
If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.
The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.
- 150rnd Capacity
- Polymer construction
- For Airsoft M4/AR15 AEG rifle
If you are loading up on magazines for your M4/AR15 AEG then you will want to check out the Q-Mag from NUPROL. This attractive-looking polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool. This magazine is designed with a crackle texture on the exterior which is useful for drawing the magazine from pouches, but also allows the mag to be used as an improvised grip to help you get the best shooting position when things get tight. This magazine is compatible with most Airsoft M4/AR15 AEGs, and is a spring loaded mid-cap, which means no battle rattle to give you away!
- 1200rnd Capacity
- Autowinding drum magazine with sound control
- For Tokyo Marui Next Gen Recoil Shock M4/416/SCAR-L
With the NUPROL 1200rnd Electric drum magazine, you will have all the firepower necessary to deal with the foes on the battlefield. A massive drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to push back any opponents who dare challenge you.
This drum magazine is constructed from high-density polymer and is the first of its kind for the NGRS system! If you miss the mega capacity of a high-capacity wheel-wound magazine, this is leagues above that. More BBs, more hits... right?
Please note, this drum magazine is ONLY compatible with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.
- 300rnd Mid-Cap
- Tough & Weighty
- Steel Construction
A Steel high capacity clockwork magazine for AR-15 / M4 models of Airsoft Electric Gun, that will fit and feed in 95% of M4 based Airsoft guns.
- 150rnd Capacity
- High density polymer construction
- For M4, SCAR-L, 416 & SA80 AEGs
If you are loading up on magazines for your M4/AR-15 AEG then you will want to check out the H-Mag from NUPROL. This high density polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool.
This magazine is designed with hexagonal texture on the exterior which adds grip and makes them easier to handle while also adding a touch of modern styling, well suited to cutting-edge setups. This magazine is compatible with most Airsoft M4/AR-15 AEGs, and is a spring-loaded mid-cap, which means no battle rattle to give you away!
- For Recoil Shock Guns
- Mid-Capacity Magazine
- 82 Round Capacity Mag
An Airsoft magazine designed for use with Tokyo Marui's STANAG accepting Recoil Shock range, with a design based upon the STANAG standardized magazine used by NATO forces.
About Our Airsoft Rifle Magazines
For all you gunners sick of running out of ammo mid game, boost your capacity with our rifle magazines.
We offer specialised rifle mags for some of the top assault rifles on the market, including Steyr AUG magazines and more. As well as having a consistent and reliable feed, all of our rifle magazines are made from robust, durable materials with textured surfaces for a secure grip and swift reload.
Plus, for trigger-happy folk or anyone that hates reloading their gun mid-game, our airsoft rifle drum mags are ideal. Offering up to 3000rnds, shop AK drum mags, AR drum mags, M4 drum mags and more. Most of them offer auto winding too, making the job even easier.
Looking to shop rifle magazines in bulk and store them in your mag pouch? We’ve got plenty of bulk offers that allow you to buy more and save!
Our mag collection doesn’t stop here either. Explore all of our airsoft magazines, from SMG mags to pistol mags and more.
Shop airsoft rifle magazines online today, or visit or Huddersfield store and try before you buy!