Airsoft Sniper Magazines

A spare (or replacement) Magazine for the Lancer Tactical LT-20 M82 Sniper Rifle. A big boy Sniper Rifle needs a big boy Magazine to go with it. This Mag holds a total of 25rnds and is filled from the top using a Speedloader. If you own a Lancer Tactical LT-20 and are limited by your ammo capacity (having to give up a sweet spot to go back to the Safe Zone and reload), then you'll want to pick up some spare magazines.

A spare or replacement Magazine for the G&G Armament M1 Garand, holding a total of 20rnds and filled using a Speedloader. These lightweight Magazines are easy to carry in bulk, and are an absolute must for an M1 Garand owner who wants to last longer in a skirmish without running out of ammo.

Every good sniper needs good mags. If you're one of the lucky few that wield the Barrett M98B M-RAD, you'll need the round to maximum picking targets off from afar.

This magazine from Snow Wolf has a 280 round capacity with a high cap design, meaning you can pop this mag in and fire for a huge period of time without the need to switch mags.

With a lightweight polymer design, the mag also helps keep your huge rifle's weight down.

A spare or replacement magazine for the Cyber Gun PGM .338 Bolt action Snipers rifle. This magazine has an authentic steel shell, and a mix of polymer and alloy internal parts. The magazine holds 19 rounds and has a large gas reservoir, enabling it to be filled multiple times with BBs before the propellant runs out.

A 22rnd magazine for the Well MB series of spring-powered Airsoft sniper rifles.

So you are after new magazines for your sneaky Russian DMR assault rifle thing? There's little point in having such a stealth-oriented setup if your magazines rattle! Introducing the 150rnd Mid-cap magazine for the CYMA CM.099 VSS Vintorez, granting you the capacity to compete but without the rattle of high-cap magazines. The magazine features reinforcement ribs on the outside which double as gripping surfaces, and is constructed from high-density polymer. These magazines fit and feed in the CYMA CM.099 VSS Vintorez but are not compatible with AK AEGs. 

A replacement magazine for CYMA Brand VSR Bar 10 Rifles, such as the CM701 Range. The magazine is constructed fully from Polymer with an Alloy Spring. 

Looking for extra magazines for your Dragunov AEG? The CYMA 100rnd Mid-cap will do the trick! This magazine is designed for the CYMA CM.057 series and holds 100 6mm BBs which can be loaded using a speed loader through the fill/feed port at the top of the magazine body. The outer shell of the magazine is constructed from stamped steel to give a realistic look and feel, complete with stamped in strengthening ribs, just like the real SVD/SVU mag.

If you need spare magazines for your Novritsch SSG10 you have found them! The 28rnd Transparent Magazine For SSG10/VSR10 Sniper Rifle is constructed from transparent polymer to allow you to keep track of your remaining ammo without having to remove the magazine mid firefight! Once again, Novritsch hits the nail on the head; being able to check your capacity by inverting your rifle means you will never be caught dryfiring at a critical moment.

The mag holds 28 BBs and can be loaded through the fill/feed port at the top front of the mag using a speed loader or loading rod. Compatibility-wise, this magazine is ideal for the Novritsch SSG10 sniper rifle but should also work in other VSR10-based designs such as the JG BAR10, Tokyo Marui VSR10 variants and the CYMA CM.701. Lock and load with the added assurance that you will never take aim, steady your breathing and press the trigger only to send a big fat nothing downrange!

A spare magazine for L96 Type Airsoft 6mm BB Gun Sniper Rifle. The magazine is officially for the ASG L96 Sniper Rifle, but will fit a range of other Brands. 

A Gas blowback magazine designed as a replacement or spare for the KC-02 Special Teams Carbine licensed by ASG. With a an ammunition capacity of up to 29 rounds. 

If you need magazines for your A&K Dragunov SVD these should fit the bill! The NUPROL 110rnd High-Cap magazine for A&K SVD is designed to work in the A&K Dragunov SVD AEG series but will not work in the CYMA or Real Sword SVDs. The magazine fits the classic SVD aesthetic thanks to its stamped steel shell complete with reinforcing ribs.

The magazine can be filled via the fill window at the top rear of the magazine and the winding wheel is located on the baseplate and needs to be wound in order to tension the magazine. 

A 30 round, speed loader filled airsoft VSR 10 / BAR 10 Magazine. This magazine will fit most Airsoft VSR 10 Rifles such as Toyko Marui, Cyma and many more.

A spare/replacement magazine for your WELL MB02/ MB03/MB07/MB09/MB10/MB11/MB12 sniper rifle. The magazine holds 28 rounds and can be filled via the feed lips on the top of the magazine either manually or with a speedloader.

Lock and load with spare mags for your VSR-10 Airsoft sniper rifle! The magazine holds 30 BBs and can be loaded using a speed loader through the fill/feed port on the top of the mag.

This magazine is well shaped to fit into fabric pistol magazine pouches, and its low weight and compact form mean you can carry plenty without compromising your mobility.

The ASG Urban sniper spring sniper rifle magazines made from Polymer and holds up to 30 6mm Airsoft BBs at a time. Easy to adjust with a side press button release catch and compact for easy storage during mid game use. 

The perfect option for snipers who want to spend more time concealed in their hide and less time frantically scrambling around for a speed loader to reload their magazines - giving away your position. 

If you're a true Sniper, then each one of these magazines has a potential for 20 kills.

A 320rnd High Capacity Magazine for the CM.099 VSS Vintorez AEG, filled with BBs by pouring them into the Fill Window at the top of the Mag. A Clockwork Winding Wheel is turned at the base of the Magazine to start feeding BBs through the mechanism, just like any other Hi-Cap.

This magazine is a direct replacement for the original Double Eagle M62 magazine which came with it. The magazine is constructed from polymer and is fed by a spring meaning no rattle. The magazine holds up to 29 rounds, and is a great spare or replacement, or perfect purchase for anyone looking to increase the number of magazines they carry allowing them to remain in the field for longer.

A spare gas magazine for the KC-02 Special Teams Carbine created by ASG. The magazine is constructed from Alloy and features Polymer feed Lips and Guide. 

A 45 round spring-fed magazine for the S&T ASW338 sniper rifle.

This magazine is a direct replacement for the original Double Eagle M50 magazine which came with it. The magazine is constructed from polymer and is fed by a spring meaning no rattle. The magazine holds up to 26 rounds, and is a great spare or replacement, or perfect purchase for anyone looking to increase the number of magazines they carry allowing them to remain in the field for longer.

If you are thinking about treating yourself to the new ultra-modern M66 Pro 700 sniper rifle from Double Eagle, or you are lucky enough to already own one, you will almost definitely need some spare magazines! The M66 magazine is constructed from polymer and is a waffle style design which matches perfectly with the aesthetics of the M66.

A 38rnd capacity magazine for the AS02 and AS03 Ares Amoeba Striker Sniper RIfle.

A spare or replacement gas magazine for the KJW KC02. 30 round capacity, "long" magazine (its longer than the short one I guess!). Constructed from Alloy and finished in matt black. 

If you have treated yourself to a lovely new Mosin-Nagant M44 from BO Dynamics, you will likely want a few of these, given how fast the M44 can fire! This 17 round magazine is constructed from alloy, and can be loaded using a speed loader or by hand through the feed/fill port at the front of the magazine. The power source for this mag is CO2 in the form of 12g unthreaded bulbs, one of which can be inserted into the left side of the magazine shell and tightened into place using the included CO2 key stored within the magazine. The key can be accessed by pushing it through the mag body from the left side.

Looking to take your KJW KC02 out in the cold? We have the solution, a CO2 mag! Remember to lubricate! 30 round capacity, perfect for the marksman who can choose his shots carefully!