All External Airsoft Parts & Attachments

If you own an M1A1 Thompson AEG replica, this will most certainly be of interest to you! Introducing the King Arms M1A1 Wood Furniture kit, a set containing a real wood stock, handguard and pistol grip all authentically profiled to match the real M1A1 SMG. The parts in this kit are all perfectly finished with satin varnish to provide a subtle sheen with wood grain showing through which even the best faux wood cannot match.

If you are planning a modern SMG-5 build I have great news for you! You can ditch that dowdy old cocking handle and swap it out it with this ACR-esque modern replacement from CYMA. Made from sturdy Alloy and designed in a thoughtful way, featuring a lightening cut to keep weight down and grip surfaces where you need it, unlike the original. The CYMA extended cocking lever gives ergonomic advantages together with looking operator-af. Suits an M-LOK handguard perfectly!

If you have a MK23 NBB pistol you might have noticed the lack of options for mounting accessories. At one point in time the MK23 was cutting edge, but in the current day and age it is in dire need of a Picatinny rail to mount some tactical goodies. Enter the Hades Airsoft MK23 rail adapter, the answer to your prayers!

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

A folding fore grip lovingly designed by NUPROL which fits onto 20mm RIS / RAS Rails to provide another manipulation point on a weapon which can be folded away when not in use.

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

If you are working on a multifunctional platform, ready for both indoor and outdoor skirmishes, then this is it! The 5KU 11.5" Aluminium Outer Barrel For M4/AR-15 AEG is compatible with most M4/AR-15 AEGs and is constructed from aluminium for a perfect balance between low weight and high strength. 

The barrel is threaded at the tip with common 14mm CCW male threading, meaning you can mount the most common muzzle devices on the market with ease, including tracer units, suppressors and flash hiders in various styles. Also present are grooves in the underside to allow a gas block or M4/AR-15 triangular front iron sights to be mounted, though this is not essential. If you need your M4 to be ready for any situation then this will get you halfway there, but don't forget you'll need a matching inner barrel too! 

If you have the strong desire to use a red dot and magnifier combination, but you also like to wear full face protection or a respirator, we have just what you need! The WADSN G43 Micro Magnifier Mount is compatible with the Ghost 3x Flip to Side Magnifier and replaces the standard flip to side mount with a raised mount designed to co-witness with EO style red dot sights with the PTS Unity Tactical FAST Riser, or T1/2 style red dot sights with the PTS Unity Tactical FAST Micro Mount. This mount can be raised and lowered to deploy, keeping the sides of your rifle slick and making it easier to manoeuvre with less chance of the magnifier snagging on gear, and making the setup more comfortable to sling. 

Fed up with fiddling when you want to switch to fun mode? TTi have you covered with the Extended Charging Handle w/Selector Switch. This set includes an extended charging handle which mounts over the top of the AAP-01 bolt and can be installed on either side, providing a protruding trigger style handle which can be racked with a single hand. Built into the rear of the charging handle we also have a low profile rotary selector lever, which means when you want to switch fire modes its no longer necessary to lock the bolt back and waste precious seconds routing around for the switch! This would be the perfect pairing for an AAP-01 in a carbine kit!

If you're recreating the latest real-world German DMR rifle, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas will put a smile on your face! Patterned after the mount setup provided with the real steel G28 DMR, this set includes a dual ring mount for either 25 or 30mm monotube scopes and a red dot sight mount with a built-in sunshade, designed for T1 footprint/mounting standard micro red dot sights. The set includes spacers to allow a 25mm monotube scope to be mounted, though by default the dual ring mount fits 30mm monotubes.

Both the scope and red dot mount are constructed from aluminium with steel bolts, nuts and screws, mounting to 20mm Picatinny rails. The dual scope ring includes a 20mm Picatinny rail on the top of each ring which is intended to allow the red dot sight mount to be fitted, though these are removable if you want to use the two mounts on separate platforms. On the right side of the mount, you'll find helpful engraved markings indicating the mounting direction, just like the real deal.

While it is designed to mimic the real G28 mount setup and is ideally paired with the East Crane EC-204 G-417 DMR, this mount setup will work on any platform with 20mm Picatinny rails and the included T1 mount has been sighted on MP5 and G36 platforms used by the German Armed Forces and Police. Whether you're replicating the real steel G28 or looking for a pair of unique mounts packaged together, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas would be a slick setup for your primary!

This Upper and Lower Receiver Set is an original replacement part for the APS ASR series M4/AR15 AEGs but may also fit other gearboxes, though it may require modification. The set includes an alloy upper and lower receiver, a bolt catch, charging handle, a magazine release, trigger guard, a steel dust cover and steel body pins. If you are building a spare upper for your APS ASR AEG this would be a perfect fit, but could also be used to add a touch of metal to a polymer M4/AR15 as long as you are okay with potentially undertaking modifications.

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

If your dust cover has fallen off and been lost, the CYMA Ejection Port Dust Cover for M4/AR-15 AEG is the solution! This replacement original part is designed for the CYMA CM.097 AEG series but should also fit M4/AR-15 AEGs from other brands. The dust cover is constructed from steel but does not include the long bar/pin needed to mount it to an AR receiver, so make sure you still have yours and you should be set!

Want a suppressor on your MB series rifle? This is what you'll need. Made from Robust alloy and finished in matt black, this suppressor adaptor will allow you to add any 14mm CCW threaded accessory to your WELL MB series sniper rifle.

With the Novritsch SSX23 Frame Rail, you can mount a flashlight or runcam on the underside of your barrel. It is constructed from strong, lightweight aluminium and is attached to the SSX23 barrel via 2 mounting screws. To attach the frame rail you are required to remove the slide, and then drill two holes at the front under the barrel, where the indents are. After this, you can screw the frame rail in and you're good to go!

The Novritsch SSX23 Frame Rail is a game changer if you skirmish in dark CQB arenas and need the flashlight to stay ahead of the opponents. Instead, this rail section can house a zoom/runcam to capture any long-range or clutch BB shots so you can brag to everyone that you are the ultimate Aisoft extraordinaire!

An Aluminium constructed rail adaptor for KeyMod rail systems.

If you're looking for a rail riser for a clearer view down your optic, the PTS Syndicate Unity Tactical FAST Riser should suit your needs perfectly. This riser is based on the real steel Unity Tactical FAST riser, designed to provide a more natural neck position for improved comfort and faster target acquisition, especially for full-face mask and respirator users.

This riser is constructed from 6000 series aluminium, meaning it's highly durable whilst maintaining a minimal weight. It is also useful for elevating your optics above any upper-mounted tac light/laser modules, such as PEQ boxes. If you're seeking a riser and want something that is luxurious in every sense, the PTS Syndicate Unity Tactical FAST Riser is exactly that!

A highly lightweight and attractive foregrip for Airsoft Picatinny rail systems that is constructed from high-quality CNC Aluminium Alloy, and has had most of its' internals gutted out to bring this grip to shockingly light 104g!

A mock Airsoft suppressor designed specifically for the MP9 GBB submachine gun, featuring genuine Brugger & Thomet AG licensed trademarks.

If you want a pistol that can reach out and touch the enemy at long range, an extended inner barrel is just the thing. The WE PX001 Silencer And Extended Barrel Kit; 11mm CW is designed for the WE PX001 but is also compatible with most WE GBB pistols if you use your original HOP-up unit assembly.

The kit includes an 11mm CW threaded suppressor for 11mm CW female threaded barrels (WE, Armourer Works, CowCow and some others), a 6.03mm tightbore inner barrel measuring 189mm in length and HOP-up unit for the PX001 platform with a pre-installed bucking.

Please be aware, it is possible that the inner barrel will protrude through the tip of the suppressor when installed on certain compact pistols so make sure you measure up before ordering. We recommend adding the length of your existing inner barrel to the length of the included suppressor (138mm); if the length is equal to or greater than 189mm, the inner barrel will fit.

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you want to return your AK-74 to its original roots, Battleaxe has the kit for you! The Battleaxe Wooden Conversion For AK-74 is designed to fit most AK-74s such Tokyo Marui, CYMA and G&G. It will fit other brands too but may need modification in order to properly attach it. The set includes a real wood upper handguard, lower handguard and stock beautifully finished to mimic the real thing.

The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. This is great for the stitch counters, and while this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AK or give it an iconic look, this Wood Conversion Kit is a fantastic option!

If your CM.097 lower receiver is damaged maybe it is time to replace it with a fresh one! The CYMA Alloy Lower Receiver for CM.097 M4/AR-15 AEG is a replacement original part for the CYMA CM.097 AEG series and is constructed from alloy. The body pins are constructed from steel for maximum strength, and the fire selector markings are finished in a modern style, with coloured bullet pictograms to indicate each mode of fire.

The set includes all body pins, the fire selector, the bolt catch and the magazine release, meaning no fiddling around trying to swap the trim parts from your old receiver, just drop your gearbox straight in!

If you are looking for a Tracer Unit with Russian styling the KP-9 Spitfire Tracer Unit from 5KU is one to keep an eye on. This device is based on the real world MPI KP-9 flash suppressor used by Russian Special Forces with their PP-19-01 SMGs and is ideal for any 9mm style Airsoft SMG but will fit any Airsoft rifle with a 14mm CCW male threaded barrel.

This KP-9 isn't just about the looks either, inside you will find a Spitfire Tracer insert which illuminates green tracer BBs and provides a realistic muzzle flash effect each time you fire. The unit can be operated in flash only, tracer only or tracer and flash mode, giving plenty of options for the aggressive, the realism focussed and the more stealthy playstyles out there. Whether you run a PP-19 AEG or you are looking for the most menacing looking Spitfire tracer unit out there, this will do the trick!

If you want to bring your M1928 Thompson AEG up a level in realism, this conversion kit will do it! The  Battleaxe Real Wood Furniture Kit for CM.051 M1928 Thompson comprises a real wood stock, a real wood vertical foregrip/handguard and a real wood pistol grip. 

To fit this conversion kit you will screws and mounts from the original CM.051, the kit only includes the real wood furniture. This kit is designed for the CM.051 Thompson AEG, it may fit other brands but modification will be required. If your CYMA Thompson needs an added dose of authenticity, a real wood kit is the way to go!

If you have damaged your suppressor mount on your CM.041 SD AEG you may think you are out of luck, but thanks to CYMA expanding its line of replacement parts you can now swap the mounting apparatus out for a fresh new mount, and have your integrally suppressed SMG rocking its suppressor again!

If you're running the super-speedy SSP28 GBB from Novritsch, here's how you get on target even faster! The Novritsch SSP28 Red Dot Plate can be mounted to place your red dot sight in a forward or rearward position, giving you the versatility to set your SSP28 up to suit your exact needs. The plate is made from CNC machined aluminium and includes the screws you'll need to mount it.

This mount plate is designed to fit Novritsch's Micro Red Dot V2 and Premium Micro Red Dot V3, but also fits any micro red dot sight with the DeltaPoint Pro® footprint/mounting standard. If you want to take full advantage of the SSP28's speed, add a red dot sight and you won't look back!