All External Airsoft Parts & Attachments

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

The WADSN T-B HL Series Pistol Flashlight is a mighty fine attachment for your trusted sidearm. It is sure to brighten anyone's day, or at least dazzle them long enough that you can shoot before they have time to figure out what hit them. This pistol flashlight features strobe and solid beam modes with the option of regular on/off or a "momentary" mode.

It also comes with polymer adapter inserts so you can attach this flashlight onto most common pistol under barrels. Temporarily impair your opponents with a whopping 700 lumens and gain the upper hand in your skirmishes with the WADSN T-B HL Series Pistol Flashlight.

If you are in the market for a compact and lightweight flashlight, then look no further! The M300B Scout Light; Single Switch Version is a superb choice for skirmishers who fear what hides in the dark, or more specifically, who may hide in the dark. This flashlight comes in two colour variants so you can match it with your loadout to keep everything looking uniform, very tactical!

The flashlight mounts onto the common Picatinny rail using its 20mm rail mount. This means it can be attached on most standard platforms without the need for rail adapters. Keep your operations illuminated with the WADSN M300B Scout Light; Single Switch Version!

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

An Aluminium constructed Suppressor for Airsoft Guns that have a 14mm CCW Male Thread. Ideal for hiding an Inner Barrel Extension or just for adding some tactical cool-factor to your equipment, this Suppressor will attach to 95% of Airsoft Replicas and is the perfect finishing touch to any Custom Gun.

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

A Polymer Solid Stock for SMG-5 replicas, which easily bolts on to SMG-5 Airsoft Guns to provide a stable aiming platform and a large battery compartment if your AEG is rear wired.

A Pistol Grip designed by PTS Syndicate for Airsoft M4/15/16 Replicas which follows the same design traits as Magpul Real Steel Accessories and attachments: Ergonomic, Lightweight, Durable and absolutely always tactical.

If you've lost important parts from your mag release, this set should sort you out! The Delta Armory Magazine Release Catch for M4/AR-15 AEG is a replacement original parts set which includes the mag catch, spring and screw, though the button itself is not included. Compatibility-wise, this set is intended for Delta Amory M4/AR-15 AEG platforms but should also fit most other brands. If your mag release spring went flying or your screw got lost in the carpet, this set should get you back up and running!

The Swiss Arms QD Suppressor will comfortably sit on any M4 Type Bird Cage Flash Hider. It features 4 steel ball bearings which friction lock onto your flash hider to keep the suppressor securely fastened. If you're looking for that sneaky aesthetic, with the option to quickly detach it if you need to, then this is the suppressor for you.

To attach the suppressor to your flash hider loosen the threads and sit it over your flash hider. Then tighten the suppressor until it is firmly attached to your flash hider. To quickly detach the suppressor, simply loosen the threading and it can be pulled off with ease.

The suppressor is constructed from alloy and is compatible with the M4 Type Bird Cage Flash Hider, which can be mounted on any Airsoft platform. Whether you are taking your DMR build in a sneaky direction or creating an assault rifle for stealthy style, the Swiss Arms QD Suppressor is the perfect finishing touch!

If you are looking for a suppressor you can quickly and easily remove as and when it suits you, these are what you are looking for! Available in 3 different lengths to suit any situation, the 5KU Special force suppressor gives a serious and aggressive look to your AEG and alters the muzzle report to make you harder to locate!

Want to make your Airsoft rifle more comfortable? An enhanced stock is what you need! The Specna Arms Crane Enhanced Carbine stock is constructed from high-density polymer, with steel QD sling sockets on either side, a steel adjustment pin and a rubber butt plate for added grip in all weather conditions. This stock is easy to install and simply requires you to lift the adjustment lever up and slide the stock onto your buffer tube. This stock will fit any AEG spec M4/AR15 buffer tube, including M4/AR15 stock adapters for Airsoft AK AEGs, SMG-5 and AR36 AEGs.

The Delta Armory 22mm Offset Angled Mount has an aluminium alloy construction, making it tough and lightweight. It is designed to install Torches, Lasers and other 20mm RIS Accessories at a 45-degree angle, which allows you to maximise the available space you have on your Airsoft Gun.

An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories. Although designed for torches, this rail could also be used to mount an offset Red Dot Sight to use as a backup to your main sight. The Delta Armory 22mm Offset Angled Mount easily attaches to 20mm Rails via the Allen Screw on the side of the unit.

The Novritsch SSG10 Suppressor Adapter allows you to attach a suppressor to your Novritsch SSG10 outer barrel. It has a 28mm CCW threading on one side and a 14mm CCW threading on the other side, allowing you to attach the most readily available muzzle devices to your SSG10. You can make your SSG10 even more unique than it already comes!

The adapter has holes through its sides you can insert a tool to ensure the threading is securely attached. The threading is compatible with all Novritsch SSG10 barrels, no worrying about whether your specific SSG10 barrel will be compatible! The Novritsch SSG10 Suppressor Adapter opens your sniper rifle up to limitless muzzle customisation, create your unique look specifically tailored to your gameplay with this handy adaptor.

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

A lightweight and tough sliding stock constructed from Polymer, that is designed for M4/15/16 AEG buffer tubes. The stock is based around the patented 'trigger style stock lever' which is incredible easy to use, and adjustments of stock length are quick and precise.

This Russian style vertical grip is for those of you that like to hold your rifle the easy way for better stability. The grip features ridged extrusions on the front and back for additional friction and grip, so your hands won't slip.

Constructed from high density polymer, this grip can be mounted to any 20mm Picatinny railed surface, but works best when mounted to a 6 o'clock rail, unless you have an unconventional style! Loosened and tightened by the side nub/bolt to secure in place.

If your Delta Armory AEG has run into some issues relating to its charging handle, do not fear, we have just the thing for you! The Delta Armory M4/AR15 AEG Extended Charging is constructed from alloy and features a steel spring for extra durability. This is an original replacement piece for your Delta Armory platform and features an extended handle design so you can better grip it when the time comes to adjust your Hop-Up unit.

If you need to fix up your old Airsoft AEGs with charging handle issues, you need the Delta Armory M4/AR15 AEG Extended Charging Handle, get your AEGs back in skirmishing condition, it's what they deserve.

A set of rail panels which can be cut to size to give you a better grip on your 20mm RIS / RAS Rail set.

A Tactical Suppressor for Airsoft AEG Rifles or Pistols rocking a 14mm CCW thread. This classic suppressor style will fit right on almost any Airsoft Assault Rifle!

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. The new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

If you are looking for a short tracer unit which maintains the illusion of being a suppressor, this NUPROL Tracer Unit does just that! Styled externally after a modern rifle suppressor, the NUPROL Tracer is a great addition to any CQB build thanks to its short overall length, and obviously, the intimidation factor glowing BBs provides. This tracer has an internal rechargeable battery that can be charged using the included Micro-USB cable, and can be mounted to any 14mm CCW male threaded barrel.

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

A lightweight and low profile stock for M4 Platform Airsoft Electric Guns which have an AEG style Buffer Tube at the rear. If your motto is 'High Speed, Low Drag', then this stock is perfect for you.

If you're interested in going sneaky on the cheap, the Big Dragon 135x34mm Dummy Suppressor; 14mm CCW & CW should suit your needs. This aluminium dummy suppressor is equipped with 14mm CCW threading at one end and 14mm CW threading at the other, meaning it can be used on both common CCW barrels and awkward CW barrels. 

Featuring a foam internal filling stabilised with a steel spring, the Dummy Suppressor should slightly muffle the muzzle report of your AEG or GBB, though its main purpose is to provide sneaky looks. Weighing in at 117 grams approximately, this suppressor is ideal for AEG and GBB rifles but can still be used on GBB pistols, potentially with a slight reduction in gas efficiency.