Viewing 90 of 191.
£16.99
  • 100rnd Capacity
  • Transparent polymer construction
  • For East Crane/E&C EC-202/203/204 series

If you are rocking the EC-202, EC-203 or EC-204 you will need some mags to keep it doing what it does best. The East Crane 110rnd Mid-Cap Magazine for EC-202/203/204 AEG is constructed with a transparent polymer shell and a steel feed spring, showcasing detailed mock 7.62x51mm cartridges inside for that realistic look. This mag is compatible with the EC-202, EC-203 and EC-204 AEG series but will not fit other 417-style Airsoft guns. 

This is a mid-cap magazine, meaning it is loaded through the fill/feed port at the top of the mag using a speed loader or loading rod. Thanks to its spring-loaded design you will never experience the dreaded battle rattle while carrying this mag, making it great for milsim skirmishers and those who prioritise stealth!

£9.99
  • 150rnd Capacity
  • Translucent polymer construction
  • For AR36 AEG Assault Rifle series

If you need AR36 AEG mags, these should do the trick! The CYMA 150rnd Mid-Cap Magazine for AR36/SL8 AEG fits both AR36 and SL8/9 platform AEGs and is constructed from a translucent brown polymer, just like the real thing. Each magazine holds 150 BBs and can be loaded from the top using an Airsoft speed loader or loading tool.

The external design of the magazine matches that of the real rifle, including a reinforcement rib on the front and an over-insertion preventing ledge, meaning even if you slap this magazine home quite hard, it won't damage your HOP-up unit. On each side of each mag, there are magazine linking lugs which can be used to connect two or more mags together, allowing for faster reloads "redi-mag" style and keeping a second magazine handy and allowing you to get back in the fight without having to fumble with pouches.

£7.99
  • 140rnd mid-cap capacity
  • No rattle
  • Mags can link together

Manufactured from a tough Polymer and has external 'lugs' that allow you to clip multiple magazines together for faster reloads, and to save space in your chest rig by using multiple magazines at a time!

The magazine holds a total of 140rnds and being a mid-cap magazine, you will need a speedloader to fill them from the top fill area, but they will feed continuously once ready, without the tell-tale rattle that high caps make.

It should fit most Airsoft AR36s, so if you're looking for some more firepower on the field, grab some of these to complete your loadout!

£9.99
Was £17.99
Save £8.00
  • Semi Transparent
  • 5.56x45 Markings
  • Dummy Rounds



A Polymer constructed Mid-Cap Magazine for AR/M4/M16 platform Airsoft Electric Guns, which holds a total of 130rnds and is a semi-transparent design with dummy rounds inside.

£10.99
  • Steel Shell
  • 7.62 STANAG
  • TM Compatible

A Mid-Cap Magazine for SR-25 / AR-10 Platform Rifles that accept a 7.62x51mm STANAG Magazine. It is a Spring Powered Magazine that is filled using a Speedloader, and will feed until empty without any rattle. With a Steel Outer Shell, this is a seriously strong and realistic Magazine, which is perfect for staying in the fight for longer without refilling. As an added bonus, it is compatible with CYMA, A&K as well as Tokyo Marui branded Rifles.

£18.99
Was £39.99
Save £21.00
  • Medium capacity magazines
  • 130rnd or 170rnd available
  • Compatible with G&G MXC9 and PCC.45

If you're looking for magazines for the fresh new sub gun on the block, the G&G MXC9? You have found them! The MXC9 medium capacity magazines are compatible with both the MXC9 and the G&G PCC.45 and are available in either 130-round or extended 170-round flavours.

These magazines are spring loaded medium capacity magazines and will require a speed loader or loading rod to fill, via the fill/feed port at the top of the magazine body. Both magazine styles are constructed from rigid high density polymer and include a clear polymer witness window on either side so you can keep track of your round count and never be caught off guard!

£23.99
Was £44.99
Save £21.00
  • Medium capacity magazines
  • 130rnd or 170rnd available
  • Compatible with G&G MXC9 and PCC.45

If you're looking for magazines for the fresh new sub gun on the block, the G&G MXC9? You have found them! The MXC9 medium capacity magazines are compatible with both the MXC9 and the G&G PCC.45 and are available in either 130-round or extended 170-round flavours.

These magazines are spring loaded medium capacity magazines and will require a speed loader or loading rod to fill, via the fill/feed port at the top of the magazine body. Both magazine styles are constructed from rigid high density polymer and include a clear polymer witness window on either side so you can keep track of your round count and never be caught off guard!

£13.99
  • 130rnd Capacity
  • Windowed with mock cartridges
  • For CA/A&K/CYMA SR25 AEG

If you need some big mags for your big boy AR, the SR25, this should do the job! The NUPROL 130rnd W-Mag Mid-Cap for SR25 is styled to suit modern setups and has a rubberised baseplate for extra grip during a reload and also allows for the "mag podding" technique to be used on smooth surfaces. This mag is a windowed design, meaning it has mock witness windows on either side showing mock 7.62x51mm cartridges inside for a realistic look. The magazine can be filled through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod.

This magazine is compatible with the Classic Army pattern of SR25, meaning it should work in the A&K and CYMA SR25 rifles as well, but will not fit ARES/Secutor or G&G patterns. The style of this magazine is a great fit for any modern SR25 platform and has a waffle textured surface for enhanced grip and strength, and a "dot matrix" at the bottom on each side so you can numerically mark your magazines.

£13.99
  • 130rnd Capacity
  • Windowed with mock cartridges
  • For CA/A&K/CYMA SR25 AEG

If you need some big mags for your big boy AR, the SR25, this should do the job! The NUPROL 130rnd W-Mag Mid-Cap for SR25 is styled to suit modern setups and has a rubberised baseplate for extra grip during a reload and also allows for the "mag podding" technique to be used on smooth surfaces. This mag is a windowed design, meaning it has mock witness windows on either side showing mock 7.62x51mm cartridges inside for a realistic look. The magazine can be filled through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod.

This magazine is compatible with the Classic Army pattern of SR25, meaning it should work in the A&K and CYMA SR25 rifles as well, but will not fit ARES/Secutor or G&G patterns. The style of this magazine is a great fit for any modern SR25 platform and has a waffle textured surface for enhanced grip and strength, and a "dot matrix" at the bottom on each side so you can numerically mark your magazines.

£12.99
  • 70rnd mid-cap magazine
  • Lightweight polymer design
  • For Tokyo Marui NGRS M4/AR15

Those of you who own a Tokyo Marui NGRS M4/AR15 and need some extra mags to stay on the field, you've come to the right place. With a 70 round capacity, this mag is a mid-cap mag meaning there is no rattle when you're running from objective to objective.

BBs are fed with a steel spring inside and the extended rod means that no BBs will escape during loading / reloading. This mag has the mechanism to activate the bolt catch of the TM NGRS variants, so if you like realism this is the mag for you.

£12.99
  • 70rnd mid-cap magazine
  • Lightweight polymer design
  • For Tokyo Marui NGRS M4/AR15

Those of you who own a Tokyo Marui NGRS M4/AR15 and need some extra mags to stay on the field, you've come to the right place. With a 70 round capacity, this mag is a mid-cap mag meaning there is no rattle when you're running from objective to objective.

BBs are fed with a steel spring inside and the extended rod means that no BBs will escape during loading / reloading. This mag has the mechanism to activate the bolt catch of the TM NGRS variants, so if you like realism this is the mag for you.

£13.99
  • 160rnd capacity
  • Steel shell, polymer internals
  • For JG LK58 and CA SA58 AEGs

If you need mid-cap mags for your Classic Army based FAL AEG these should do the trick! The Fuxing 160rnd Mid-cap Magazine for JG/CA LK58/ SA58 AEG is constructed with a steel shell, polymer internals and a steel feed spring and as with all mid-caps, this thing doesn't rattle like maracas as you advance on the enemy!

The mag can be loaded through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading rod/tool and needs to be inserted into your LK58 or SA58 AEG with a "rock and lock" motion. The mags are designed for the JG LK58 AEG platform but should also work in the Classic Army SA58 on which the design is based.

£16.99
  • 150rnd Capacity
  • For AK AEG series
  • Strong feed spring - Great for high rates of fire

If you have an AK with an incredible rate of fire, you will need some enhanced magazines to keep up! Introducing the TPM-AK, the latest enhanced magazine from PTS Syndicate, the number 1 name in high performance Airsoft magazines. The TPM-AK is compatible with practically any AK AEG but is styled after 5.56mm AK magazines available on the civilian market in the US. This magazine is a spring fed mid-cap and can be loaded using a speedloader through the fill/feed port on the top of the mag.

£9.99
  • 100rnd Capacity
  • Stamped steel shell
  • For CYMA CM.057 SVD and SVU AEG

Looking for extra magazines for your Dragunov AEG? The CYMA 100rnd Mid-cap will do the trick! This magazine is designed for the CYMA CM.057 series and holds 100 6mm BBs which can be loaded using a speed loader through the fill/feed port at the top of the magazine body. The outer shell of the magazine is constructed from stamped steel to give a realistic look and feel, complete with stamped in strengthening ribs, just like the real SVD/SVU mag.

£8.99
  • Unique hex design
  • Lightweight & tough
  • 140rnd Capacity

A medium capacity spring fed magazine that replicates a real world mag that's incredibly popular with civilian shooters. The magazine has a tough high quality Polymer exterior that feels great in the hand thanks to the unique hex cut out design, and the ridges that run up the length of the front and back of the magazine.

Holding 140rnd , the mag is a mid-cap type, meaning there is no rattle in comparison with hi-cap magazines and is filled using a speed loader at the top. If you need a high quality magazine that meets your demands, want a unique design to finish off that modern-era rifle or simply want to carry more ammunition in the field without annoying rattle sounds - you can count on these magazines.

£11.99
  • Unique hex design
  • Lightweight & tough
  • 140rnd Capacity

A medium capacity spring fed magazine that replicates a real world mag that's incredibly popular with civilian shooters. The magazine has a tough high quality Polymer exterior that feels great in the hand thanks to the unique hex cut out design, and the ridges that run up the length of the front and back of the magazine.

Holding 140rnd , the mag is a mid-cap type, meaning there is no rattle in comparison with hi-cap magazines and is filled using a speed loader at the top. If you need a high quality magazine that meets your demands, want a unique design to finish off that modern-era rifle or simply want to carry more ammunition in the field without annoying rattle sounds - you can count on these magazines.

£8.99
  • 80rnd Capacity
  • Long mid-cap mag - No rattles
  • For CM.126/126S/132/132S B9 style AEPs

If you want a long-boi magazine for your B9 AEP but you hate battle rattle giving you away, this mag was made to meet your needs! The CYMA 80rnd Long Mid-cap Magazine For CM.132/126 B9 AEP follows the external format of the CYMA AEP High-caps but is a rattle-free spring loaded mid-cap which should keep those with a more sneaky playstyle at the top of their game.

The magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 80 6mm Airsoft BBs; a significant increase over the standard AEP magazine. Compatibility-wise, this magazine is suitable for the CYMA CM.126, CM.126S, CM.132 and CM.132S B9 style AEPs and is unlikely to work in other designs.

£12.99
  • Medium Capacity magazine
  • No rattle
  • For CYMA VSS Vintorez

So you are after new magazines for your sneaky Russian DMR assault rifle thing? There's little point in having such a stealth-oriented setup if your magazines rattle! Introducing the 150rnd Mid-cap magazine for the CYMA CM.099 VSS Vintorez, granting you the capacity to compete but without the rattle of high-cap magazines. The magazine features reinforcement ribs on the outside which double as gripping surfaces, and is constructed from high-density polymer. These magazines fit and feed in the CYMA CM.099 VSS Vintorez but are not compatible with AK AEGs. 

£13.99
  • 120 Round Capacity
  • Modern Styled Design
  • Moulded Polymer Magazine

An Airsoft Medium Capacity Magazine that is ideal for the Airsofter wanting to inject a little more realism into their Skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.

£14.99
  • 140rnd Capacity
  • Steel construction
  • For S&T 1918 BAR AEGs

If you're rocking a BAR to bring that old-school-cool vibe to your local site, these mags will keep you in the action for longer! The S&T 140rnd Mid-Cap Magazine For M1918 BAR AEG is specifically designed for the S&T 1918 Browning Automatic Rifle (BAR) AEG and is constructed with a steel shell, polymer internals and a steel feed spring. 

Like other Airsoft mid-caps, this BAR mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod. Replicating the real BAR magazine, these mags are rather massive. We recommend specific BAR magazine pouches for these beasts, preferably replica WW2 kit!

£12.99
  • 120rnd Capacity
  • Mid-cap mag - No battle rattle
  • For Novritsch SSR9 AEG

If you're running the incredibly swift SSR9 AEG from Novritsch, you'll need loads of these to keep it fed! The Novritsch 120rnd Magazine for SSR9 AEG is constructed from high density polymer and can be loaded through the fill/feed port at the top of the mag body using a speed loader or loading rod. 

The slim design of these magazines allows you to carry plenty, and it goes without saying, you'll need a lot of these mags to keep up with the SSR9 DSG's insane rate of fire!

£10.99
  • 100rnd Capacity
  • Steel upper shell with polymer lower shell
  • For Well R4 SMG-7 AEP

If you need to load up on magazines for your SMG-7 AEP, but you don't want the "battle rattle" from using high capacity magazines, you'll need a few of these! The 100rnd Mid-cap magazine for the well R4 is constructed with a steel upper shell and feed spring, and a polymer lower shell with polymer internals. The magazine includes "4.6x30" stamped markings on the left side of the shell and realistic reinforcement ribs along the sides of the upper shell. This magazine holds 100 6mm BBs and can be fed through the feed/fill port at the top of the magazine using a standard Airsoft speed loader. The magazine is designed for the Well R4 but should work in most SMG-7 AEPs. 

£12.99
  • 130rnd Capacity
  • Mid-cap mag - No battle rattle
  • For Snow Wolf M3 Grease Gun AEGs

If you need mags to keep your Grease Gun AEG in the game, these are the ones! The Snow Wolf 130rnd Mid-Cap Magazine for SW-06 M3A1 AEG is constructed with a steel shell, polymer internals and a steel feed spring, holding 130 BBs with no battle rattle or winding wheel to worry about! 

Like other Airsoft mid-caps, this mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Compatibility-wise, these mags are for the Snow Wolf M3 and M3A1 Grease Gun AEGs and are unlikely to work with other brands. Whether you run a WW2 loadout with a Grease Gun or a Desert Storm loadout with the same, these mags belong in your rig!

£9.99
  • 130rnd Capacity
  • 7.62x39mm Style AR magazine
  • Compatible with most M4/AR-15 AEGs

If you are running the Double Eagle DEK762 and you want mags that match the original, you just found them! The Double Eagle 130rnd 7.62x39 Style Mid-Cap Magazine for M4/AR-15 AEG is styled after real steel 7.62x39mm AR magazines, making it a perfect fit for the DEK762 but also compatible with most M4/AR-15 AEGs.

The magazine is constructed with a steel shell, polymer internals and a steel feed spring, showcasing mock reinforcement ribs stamped into each side. This mag is also quite short for a 130-round mag, allowing you to get closer to the ground when shooting from the prone position and make better use of surrounding cover. As with other Airsoft mid-caps, the 7.62x39 style magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Whether you own the DEK762 or you want to add an unconventional look to your M4/AR-15 AEG, this mag is perfect for the job!

£15.99
  • Variable magazine
  • 30/130 round capacity
  • High density polymer

Arcturus brings us a modern variable capacity magazine for your M4/M16 AEG platform. Holding a choice of 30 or 130 rounds and constructed from high density, lightweight polymer. The magazine features mod cons such as textured finish, ridged edges and ridged baseplate.

£15.99
  • Variable magazine
  • 30/130 round capacity
  • High density polymer

Arcturus brings us a modern variable capacity magazine for your M4/M16 AEG platform. Holding a choice of 30 or 130 rounds and constructed from high density, lightweight polymer. The magazine features mod cons such as textured finish, ridged edges and ridged baseplate.

£13.99
  • Check and dot pattern texture
  • 150rnd Capacity
  • For M4/AR15/SCAR-L/416 AEGs

For those of you looking for an ultra-modern styled mid cap, this is the one you're after!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

£13.99
  • Check and dot pattern texture
  • 150rnd Capacity
  • For M4/AR15/SCAR-L/416 AEGs

For those of you looking for an ultra-modern styled mid cap, this is the one you're after!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

£10.99
  • 150rnd Capacity
  • Polymer construction
  • For Airsoft M4/AR15 AEG rifle

If you are loading up on magazines for your M4/AR15 AEG then you will want to check out the Q-Mag from NUPROL. This attractive-looking polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool. This magazine is designed with a crackle texture on the exterior which is useful for drawing the magazine from pouches, but also allows the mag to be used as an improvised grip to help you get the best shooting position when things get tight. This magazine is compatible with most Airsoft M4/AR15 AEGs, and is a spring loaded mid-cap, which means no battle rattle to give you away!

£13.99
  • Moulded Polymer Magazine
  • Modern Styled Design
  • 120 Round Capacity



An Airsoft medium capacity magazine that is ideal for the Airsofter wanting to inject a little more realism into their skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG magazine compatible Airsoft guns.

About Our Airsoft Magazines

Mag up and shop low, mid and high capacity magazines for all airsoft guns.

Polymer, full metal, low to high capacity we have you covered for every kind of airsoft gun from pistol magazines to SMG magazines. Remember, you can never have enough magazines! Plus, take advantage of our bulk deals and save money. 

We have every magazine from your standard AEG to SYSTEMA PTW and MARUI Recoil Shock series that stop your AEG or PTW from firing once the magazine is empty. We also stock a range of flash magazines that are wound up using a pull cord system. This allows for them to be wound faster and easier, especially whilst wearing gloves. And when you need to discard the mag mid-battle? Shop our magazine pouches or dump pouches