Airsoft Magazines

If you want more ammo on your AK but drum mags aren't your thing, this mag very well might be! The CYMA 1100rnd Electric High-Cap Dual Magazine for AK47/74 AEG is styled after a pair of real steel 7.62 x 39mm magazines clamped together with a mag coupler, complete with detailed dummy cartridges for a more realistic look. This magazine should be compatible with any AK47/74 AEG rifle but is ideal for 7.62 x 39mm chambered AK replicas such as the original AK-47, AKM and AK-103, to name but a few!

This magazine holds an incredible 1100 BBs and can be wound up in 3 different ways; using the winding button, the manual winding wheel just like any other high-cap, or via the sound control function which will wind the magazine as it detects you shooting. 

Filling the mag can be done through the fill window on the top of the mag body and the manual winding wheel is on the baseplate, as it is in most high-cap mags. The button which controls the auto-winding/sound control function can be found on the left side of the dummy magazine, and if you want to wind the mag using the winding wheel make sure you have this switch in the central (off) position. To power the magazine you will need 3 x AAA cells (not included) but if you don't have any lying about the night before the skirmish you can always use the winding wheel and stay in the fight with a whopping 1100 rounds at your disposal!

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

Introducing the Lightweight Green Gas Magazine from Action Army, a 50 round extended magazine for the much-lauded Action Army AAP-01 pistol and TM compatible EU series pistols. This magazine looks like something we have seen before, but at around half the weight! If you want an extended magazine but you don't want to ruin the balance of your pistol, this would be what you need!

If you are sniping you probably don't need that much extra ammo, but there is nothing worse than hiding on the deck fumbling with your speed loader as the enemy close in, trust us! The Double Eagle M52 magazine is constructed from polymer and holds 27 rounds, giving you 27 more chances to get that kill! These magazines are nice and compact, and easy to store inside pistol magazine pouches or a utility pouch. This magazine looks like a VSR design but we have not yet been able to confirm compatibility.

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!

If you're getting gassed up for the GBBR season and you're running a CGS or TM ZET system GBBR, fill your rig with these! The CYMA 30rnd Green Gas Magazine for M4/AR-15 CGS & ZET GBBR is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the rear of the steel STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss!

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.

If you run a G3 platform AEG and you need mags with no rattle and decent capacity, Fuxing has you covered! This magazine is constructed with a steel shell and polymer internals and is a copy of the most common G3 magazine style seen in the real steel world. The externals include an over-insertion stop on each side and reinforcing ribs giving it a realistic look, and on the inside this is a spring-loaded mid-cap mag, meaning no battle rattle as you move!

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speedloader or loading tool and holds a very respectable 150 BBs; more than enough to keep pace with the M4 and AK users. These mags should fit any Tokyo Marui clone G3 AEG platform, including the G3A3, G3A4, G3 SAS, MC51 and PSG1. Compatibility with the LCT G3 series is yet to be confirmed.

This is a spare or replacement Magazine for the Krytac KRISS Vector Airsoft Electric Gun, constructed from Polymer and holding a total of 95rnds. It is filled using a Speedloader to feed BBs in through the top of the Magazine, and will feed until empty with zero rattle. Being a Krytac official Magazine, it features all the trademarks it should, as well as a mock capacity-indents like you would see on the real thing.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

If you're planning to grab the KRYTAC Vector when it drops, this is the cheapest way to fill your rig! This three-pack of low-capacity green gas magazines is designed exclusively for the Airsoft KRYTAC KRISS® Vector GBB, created by KRYTAC and officially licensed by KRISS®.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a mid cap variant, meaning that it holds a medium amount and is filled at the top using a speed loader. Unlike high-cap mags there is no 'battle rattle' so if you're a more sneaky type of player mid-cap mags are for you.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

A Low Capacity Magazine designed for M14 AEG, where the player wants a magazine with a more realistic capacity. The Magazine is constructed from Alloy, with Polymer internals. 

You shouldn't need to reload often when sniping, unless you are a bad shot! Regardless of this, it's always wise to have a spare mag on hand for extended skirmishes rather than panic under fire trying to load BBs as the enemies BBs shower down upon you! Introducing CYMA's spare magazine for the CM.702 M24 rifle. This magazine is constructed from polymer and holds 28 rounds. The magazine can be loaded either by hand or with a speed loader. 

If you're working on a modern tactical AK build, this is the ideal magazine to complete it! The CYMA 150rnd Bulgarian 5.56 Style Mid-Cap for AK47/74 AEG is constructed from brown tinted translucent polymer with a ribbed external design, showcasing mock cartridges inside for visual realism. 

Being an Airsoft mid-cap magazine, this mag holds 150 BBs loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. Thanks to its spring-loaded internals, this magazine won't rattle as you run, making it perfect for stealthy playstyles. Whether you're building a 5.56 style AK or you run a modernised AK bristling with modern accessories and upgrades, complete your build with the CYMA 150rnd Bulgarian 5.56 Style Mid-Cap for AK47/74 AEG!

A replacement magazine for the Scorpion Evo series that holds far more rounds than the standard mag is perfect for the operator who love to suppress the enemy or run lightweight with minimal magazines.

A medium capacity polymer magazine for AK series, both 47 and 74 for a range of manufacturer AK's including G&G, CYMA and more. All part of the  NUPROL Essential range of magazines.

If you have dreams of building an old school SMG-5 but you can't find the right mags, get them here while they last! The CYMA 120rnd Old School Straight Mid-cap Magazine for SMG-5 AEG Series matches the real steel early style of SMG-5 magazine perfectly, including its straight body design, reinforcement ribs and steel shell construction.

These mags are mid-caps, meaning no battle rattle as you go room to room with your SMG-5 doing what it does best, and should be compatible with practically any SMG-5 AEG platform out there. The mags can be loaded through the fill/feed port at the top of the magazine body using a standard Airsoft speedloader or loading rod and hold 120BBs, a respectable capacity for such a compact magazine design. If you have your old school handguard and your Maglite ready, finish your build off with these old school straight mags!

If you need AR36 AEG mags, these should do the trick! The CYMA 150rnd Mid-Cap Magazine for AR36/SL8 AEG fits both AR36 and SL8/9 platform AEGs and is constructed from a translucent brown polymer, just like the real thing. Each magazine holds 150 BBs and can be loaded from the top using an Airsoft speed loader or loading tool.

The external design of the magazine matches that of the real rifle, including a reinforcement rib on the front and an over-insertion preventing ledge, meaning even if you slap this magazine home quite hard, it won't damage your HOP-up unit. On each side of each mag, there are magazine linking lugs which can be used to connect two or more mags together, allowing for faster reloads "redi-mag" style and keeping a second magazine handy and allowing you to get back in the fight without having to fumble with pouches.

If you're opposed to reloads and prefer shooting, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 from Army Armament belongs on your 'Capa. This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones.

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Hi-Capa Magazine for R501/R603/R604 should be a welcome addition to your kit list!

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

If you are looking for mid-caps with a bigger-than-average capacity the EMG 210rnd Strike Industries Polymer Magazine for M4/AR-15 AEG fits the bill! These magazines are constructed from seriously solid high density polymer with a steel feed spring and a high-vis orange follower so you can easily see when you are fresh out of ammo.

Being officially licenced by Strike Industries, this magazine is a near 1:1 copy of the real Strike Industries "Strike Mag MK1" and is not shy about its brand pedigree, with subtle licenced trademarks across the design as well as realistic 5.56x45 calibre markings. If you are looking for a more realistic alternative to the PTS EPM magazine, this would be a great choice!