Refine results
Refine by
Featured
Viewing 30 of 241.
grid
list
£39.95 Pack price
Bought separately £54.95
Save £15.00
  • 130rnd Capacity
  • Wide Compatibility
  • 40% saving

A 130rnd Mid-Cap Magazine for SMG-5 Platform Airsoft Guns, fitting CYMA, Classic Army, SRC, JG and Tokyo Marui standard replicas. This modern-style Magazine is reminiscent of the 'P-Mag' style design, and features Mock Bullets / Dummy Ammunition visible through a window on the side of the Magazine. Whether you run a modern SMG-5 loadout, or you want to add a tactical 'touch' to your Airsoft Gun, then the CYMA 130rnd Polymer SMG5/SMG5K Magazine is perfect for the task.

£6.99
  • Hex Patterned
  • 450Rnd Capacity
  • Marui Compatible

A clockwork-wound high capacity magazine for AR platform Airsoft replicas, with an attractive Hex-pattern to improve handling and aesthetics ten-fold. They are available in both Black and Tan and hold a total of 450rnds each.

£7.99
  • Medium Capacity Mag
  • Textured Sides
  • Spring Loaded

A medium capacity spring fed magazine designed for use in Airsoft M4, AR15, 416, and SCAR16 AEG. The magazine holds up to 150 Airsoft 6mm BBs and is filled from the top using an Airsoft speed loader.

The magazine is constructed from a lightweight polymer and is textured to make it easier to hold when inserting or removing it from your Airsoft Gun. This magazine is perfect for those Airsoft Skirmishers who own an Airsoft M4 and are looking for a great looking magazine to bolster their collection.

£7.99
  • Polymer construction with steel feed spring
  • 120rnd Medium capacity magazine
  • For M4/AR15 Airsoft AEG rifle series

If you are bored with the prolific "magazine pull" style of polymer magazines, perhaps these will interest you! The Advanced Polymer Mid-cap Magazine from KUBLAI is patterned after the real steel Lancer Systems magazine, optimised for use with real SCAR and HK416 rifles. This magazine is compatible with any M4/AR15 AEG rifle, and also 416 and SCAR-L style AEG rifles. The magazine is constructed from polymer and has textured sections and ribs across its surfaces to ensure you have control over the magazine, even when you are reloading really, really fast! This magazine holds 120 BBs and is a mid-cap magazine, meaning no battle rattle! The magazine can be filled through the fill/feed port at the top of the magazine using a standard Airsoft speed loader.

£8.99
  • For JG T3 / G3
  • High Capacity
  • Holds 500 Round

A spare magazine for JG T3 / G3 Style Airsoft AEG. The magazine is a high capacity magazine, storing 500 rounds.

£8.99
  • Low profile magazine
  • Adjustable capacity
  • Polymer-MAG style

If you are the type of player who spends plenty of time prone, you will appreciate this magazine. The low profile 20/70 round DMAG allows you to get lower to the ground when crawling and gives a great look to a DMR platform rifle.

£8.99
  • Polymer shell with steel feed spring and base plate
  • Loooonngg magazine  - 45 round RPK style
  • 140rnd Medium capacity mag for AK AEG series

Looking for greater mag capacity without having to wind? If you are rocking the support weapon version of the venerable AK platform, the RPK, or any AK Airsoft AEG, this magazine will suit your needs perfectly! This 140rnd mid-cap magazine is styled after the 45 round RPK-74 magazine issued with the support weapon version of the AK. The magazine holds 140 BBs and can be loaded through the fill/feed port at the top using a standard Airsoft speed loader, and is a spring-fed mid-cap, meaning you can sneak around with one of these on your rifle without giving your position away! The magazine is constructed with a polymer shell, steel feed spring and steel base plate, and is compatible with any standard AK47/74 Airsoft AEG rifle.

£8.99
  • 150rnd Capacity
  • Steel shell with polymer internals
  • For M4/AR15 AEG rifle

If you are loading up on magazines and you want to avoid the battle rattle of a loadout full of high-cap mags, mid-caps are the best solution! These mid-cap magazines from CYMA hold 150 rounds, and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. The magazine is constructed with a steel shell and feed spring, with polymer internals. The exterior design of this magazine matches the widely issued NATO STANAG magazine type and will fit in with any M4/AR15 loadout from practically any time period or military organisation. This magazine is compatible with the vast majority of M4/AR15 AEG rifles, and has the added bonus of a slightly higher capacity than the average mid-cap!

£9.99
  • No Rattle
  • Stubby Design
  • 65 Round Mid Cap

A stubby low capacity magazine meaning you can move at speed with no rattle.

£9.99
  • 150rnd Capacity
  • Polymer Construction
  • Medium Capacity Mag

A replacement magazine for Airsoft AK47 / 74 AEG, which are based off Tokyo Marui Style designs, such as the CYMA AEG.

£9.99
  • Polymer construction
  • 500rnd wheel wound high-cap magazine
  • For AK Airsoft AEG series

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

£9.99
  • Polymer construction
  • 500rnd wheel wound high-cap magazine
  • For AK Airsoft AEG series

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK74 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong reinforced polymer shell with ribs across all its surfaces, to add strength to the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch for fast and easy reloads. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its shallow curve is a tell-tale sign that this is a 5.45 style AK magazine, for those who like to keep it real!

£10.99
  • For AR/M4/M16 AEG
  • Textured Surface
  • 70rnd Capacity


A Polymer constructed low-capacity magazine for AR/M4/M16 platform Airsoft Electric Guns. It is created by Lancer Tactical but has been tested as fitting in other brands such as G&G and ASG.

£10.99
  • 130rnd Capacity
  • Wide Compatibility
  • Dummy Ammunition

A 130rnd Mid-Cap Magazine for SMG-5 Platform Airsoft Guns, fitting CYMA, Classic Army, SRC, JG and Tokyo Marui standard replicas. This modern-style Magazine is reminiscent of the 'P-Mag' style design, and features Mock Bullets / Dummy Ammunition visible through a window on the side of the Magazine. Whether you run a modern SMG-5 loadout, or you want to add a tactical 'touch' to your Airsoft Gun, then the CYMA 130rnd Polymer SMG5/SMG5K Magazine is perfect for the task.

£10.99
  • Steel shell with polymer internals
  • 500rnd Wheel or key wound High-cap magazine
  • For the Jing Gong LK58 Airsoft AEG series

One of the best things about the Jing Gong LK58 Airsoft AEG series is its massive capacity yet short in length magazines, packing 500 rounds into a magazine that will still allow you to keep low in the woods and avoid getting hit. The LK58's 500rnd high-cap magazine is now available as a spare, meaning you can now rock a 1000 BB loadout with only two magazines!

This magazine is constructed with a steel shell and polymer internals and is a wheel or key wound high capacity magazine. The winding wheel can be found on the base plate, and for faster winding, the magazine can also be wound up using the included key, through the winding port on the right side of the magazine body. The fill window is located at the top of the magazine and can be opened by hand. This magazine is designed for the Jing Gong LK58 Airsoft AEG series.


£10.99
  • 330rnd Capacity
  • Realistic ribbed design
  • For AUG Airsoft AEG series

If a bald New York cop just killed your brother, it's time to pull out the AUG! If you are making use of a fine Austrian inspired AEG rifle, you will probably need some magazines to keep up when skirmishing. These magazines are designed for the AUG Airsoft AEG series, including Jing Gong AU-1G and others based on the original Tokyo Marui design. This magazine is realistically designed, with ribs on the exterior surface to add strength and to provide exceptional grip. The magazine is filled through the fill window at the top of the magazine body and can be wound using the wheel on the baseplate. This mag is available in either solid black, or translucent brown, meaning whether you are doing a modern tactical AUG or an old-school classic AUG, these mags will suit!

£10.99
  • 350rnd Capacity
  • Integrated magazine clamp lugs
  • Wheel wound High-cap for SG55x series AEGs

If you are running the lesser seen but extra-cool SG55x series Airsoft AEG rifle, you'll want to load up on magazines so you can show the AR users what a weapon of class can do! The 350rnd High-Cap magazine for S-550/552 from Jing Gong is perfect match to the real SG series magazine, including its polymer construction and integrated magazine clamp lugs on either side of the magazine body. These lugs allow you to clamp two magazines together for an ultra-fast reload with an additional magazine on the rifle and no need to go digging into pouches, saving you precious seconds in-game. The magazine can be filled via the fill window at the top of the magazine and is wound using the wheel on the baseplate.

£10.99
  • Polymer construction
  • 130 round capacity mid-cap
  • For AK Airsoft AEG series

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 130rnd AK47 Reinforced Polymer Mid-cap Magazine from CYMA sports a strong polymer shell with reinforcement ribs and widened gripping surface on the base of the magazine to aid in removing it cleanly from pouches. The magazine holds 130 6mm BBs and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who are sticklers for the details!

£11.99
  • M98A UMG Compatible
  • Wheel Wound Design
  • 450 Round Capacity



A 6mm BB Airsoft 450 round high capacity magazine, designed to be used with Double Eagles M89A series of Airsoft Electric Guns.

£11.99
  • For AS Val Family
  • Black or Brown
  • 50rnd Capacity



A low capacity, Polymer constructed 50rnd magazine for the AS VAL / VSS Vintorez / SR-3 / SR-3M family of Airsoft Electric Guns. These magazines will feed BBs completely until they are empty without any need to wind. 

£11.99
  • Mid-Cap Design
  • For AR-10/SR-25
  • Modern P-Mag Type

A Polymer constructed Mid-Cap Magazine for AR-10/SR-25 Platform Rifles. The Magazine features a modern P-Mag Style aesthetic with mock bullets seen through the window on the Mag, and a 220rnd capacity. The Mag is filled using a Speedloader, and will feed your Gun until empty, with no rattling or winding required.

£12.99
  • Perfect for CQB
  • Fake Rounds Inside
  • Mags Can Be Linked

A low capacity AR36 magazine from ASG, with a transparent Polymer casing and dummy rounds which can be seen through the case.

£14.99
  • Moulded Polymer Magazine
  • Modern Styled Design
  • 120 Round Capacity



An Airsoft medium capacity magazine that is ideal for the Airsofter wanting to inject a little more realism into their skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG magazine compatible Airsoft guns.

£14.99
  • PTS Enhanced Polymer
  • Compatible with TM, JG, Classic Army & more
  • Reliable feeding

The PTS EPM-G Magazine is designed for use in airsoft AR36 replica's & is compatible with Tokyo Marui, Jing Gong, Classic Army, SRC, Umarex, Echo1 & other AR36 platforms alike. 

£17.99
  • Modern M16 Magazine
  • Rubber Base Plate
  • 120rnd Mid-Cap

A lightweight magazine for Airsoft 6mm BB Guns which accept STANAG based magazines. The magazine is branded with ARES's AMOEBA logo, with mock ammo types, trademarks and warnings. 

The magazine itself is based on the VN Style of Magazine, and should fit into almost all STANAG Airsoft weapons, making it the perfect purchase for any Airsoft skirmishers looking for lightweight, durable and low profile magazines with a twist.

£17.99
  • Semi Transparent
  • Fake Bullet Shells
  • 40rnd Capacity



A simple spare additional or replacement magazine for your G&G G2H Airsoft AEG. With a 40rnd real steel capacity limit, yo u can run and gun with zero BB rattle whilst sniping away with your electronic powered AEG.

£17.99
  • Realistic Shell
  • Wheel Wound
  • Holds 200rnds

An official magazine designed by BOLT for their SMG-5 series of Airsoft replica. The magazine is wheel wound and holds up to 200 rounds allowing you to fire for longer without having to stop and refill. The magazine is constructed from high quality materials, with a realistic alloy outer shell and polymer internals. This magazine is perfect for those who already own a bolt SMG-5 and are looking for the exact magazine designed for their replica.

£17.99
  • 20rnd Capacity
  • Speedloader Filled
  • Stay in the Fight Longer

A spare or replacement Magazine for the G&G Armament M1 Garand, holding a total of 20rnds and filled using a Speedloader. These lightweight Magazines are easy to carry in bulk, and are an absolute must for an M1 Garand owner who wants to last longer in a skirmish without running out of ammo.