Airsoft Magazines

If you are running the Well Minigun you will probably want a couple of these on hand to keep up with its intense rate of fire! The WELL PRO 1200rnd Magazine for WE23-S/L Minigun AEGs holds 1200 BBs and winds itself via the internal motor of the Well Minigun, meaning no need to do anything but pull the trigger!

The magazine indexes at the rear and rocks into lock at the front, similarly to an AK or FAL platform but backwards, and the magazine release is located on the front of the mag, taking the form of a button. To fill the mag, you will need to remove the rear plate to expose the fill window by squeezing the two tabs on either side of the central "bar" on the rear plate and removing it, together with its internal spring. Remove the entire assembly, pour your BBs into the mag,  reinstall the rear plate, and you are ready to shoot!

If you want to run your SSP18 or EU-series GBB on HPA, the Novritsch HPA SMG-5 Magazine Adapter for EU Series GBB Pistols; Gen 2 is the easiest way to do it. This adapter is pre-built using a zinc alloy magazine body and fibre-reinforced nylon polymer adapter and is outfitted for US Spec HPA lines by default. This adapter is designed to feed from curved MP5/SMG-5 AEG mid-cap magazines and HPA from an external tank (not included), increasing capacity considerably and practically eliminating FPS fluctuation due to the "cooldown" effect. 

The adapter is pre-assembled, meaning you don't need to mess around putting it together or run the risk of doing it wrong and causing injury. Naturally, you'll need an HPA bottle, air line and regulator to use this adapter and the fitting is US Spec, meaning only US Spec air lines will fit. If you're running your SSP18 in the Novritsch Minimalist Carbine Kit or as a primary, the Novritsch HPA SMG-5 Magazine Adapter for EU Series GBB Pistols; Gen 2 will give you the rapid-fire performance and capacity you need to stay ahead!

A Full Polymer constructed Mid-Cap Magazine for the G&G branded G36 series AEGs. Perfect for those who want to inject more realism into their play-style.

An Airsoft 6mm BB gas blowback magazine for the 4.3 Hi-Capa pistol series. The magazine is constructed from Alloy, with Polymer feed lips, base plate and follower.

A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is of standard magazine length, holds 21 rounds and is a direct replacement for the magazine which comes with the pistol. The magazine can be filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included Allen key, through the baseplate.

If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is of standard magazine length, holds 21 rounds and is a direct replacement for the magazine which comes with the pistol. The magazine can be filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included Allen key, through the baseplate.

If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

If you need mags to keep up with your SSP28's insane rate of fire, these are the ones! Patterned after real steel Glock mags with a +2 round extension, the Novritsch 30rnd SSP28 Green Gas Magazine is made with an alloy shell, polymer feed lips, a polymer baseplate, brass valves, a rubber gas route bucking and rubber O-rings.

The fill valve is located on the baseplate, and to fill it with gas, you will need to invert the mag and your gas can, as is the case with other GBB pistol mags. Loading BBs can be done either through the feed lips on the top or through the widened follower channel on the front by pulling down the follower. Please note, this magazine is only compatible with the SSP28 GBB and won't fit the SSP18, TP22 or any other EU series GBB we have tested.

If you run your Hi-Capa as a primary and find yourself short on ammo, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 GBB Pistols will keep you shooting for longer! This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones. This is the chrome silver version, ideal for the stylish skirmisher. If you need the black version, check it out here!

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Magazine for R501/R603/R604 GBB Pistols will be a useful addition to your kitlist!

A spare magazine for the Gas Blowback submachine gun; the WE SMG-8, and the WE SMG-A1 (Also known as the New Wave - NP7 or "Small Rice 7").

*Please note that this magazine is not compatible with the Tokyo Marui SMG-7 or Umarex MP7 platforms

Are you the type of player that seeks every advantage to keep the enemy team subdued whilst skirmishing? Having fire superiority is one of the best ways to make the most of an SMG and an aggressive play style. The NUPROL 1200rnd Electric drum magazine is a superb addition to any SMG-5 loadout and can be an asset in gaining the volume of fire advantage when skirmishing, and can turn the SMG-5 into a highly mobile and manoeuvrable support weapon, able to keep pace with the assaulter and provide supporting fire for the team. This drum magazine is constructed from high-density polymer with a modern design aesthetic, fitting in perfectly with the SMG-5 styling, especially if it is railed up!

A 20 Round Green Gas Magazine for the UMAREX Heckler & Koch Gas Blowback G3A3 Rifle.

If you're in search of some extra magazines for your WELL PRO WE09 AK-12K, this is exactly what you need! These magazines are designed specifically for the WELL PRO gas AK series. They are constructed with a strong polymer shell holding the alloy internals and steel spring. These materials are guaranteed to resist the rough conditions of any skirmish.

This magazine holds a whopping 38 BBs, a larger amount than the usual 30-round capacity of other gas magazines. The BBs are loaded through the top, just like other gas magazines. To fill the magazine with gas, you can find the fill valve on the rear of the magazine near the top.

This magazine inserts just like any classic AK magazine would, with the rock and lock method. This means you have to insert the front section of your mag first, then "rock" your magazine back to "lock" it in place in your AK rifle. If you need a high-quality magazine for your WELL PRO WE09 AK-12K, this is the best choice for you!

If you need more ammo on tap and ain't got time to reload, the Specna Arms 380rnd S-Mag High-Cap Magazine for M4/AR-15 AEG is what you need to fill your rig up! This wheel-wound high-cap magazine holds a respectable 380 BBs, loaded through the fill window at the top and fed into your M4/AR-15 AEG via the winding wheel on the baseplate. Simply open the BB fill window door, pour your BBs in and wind the wheel 10-15 times, after which you are ready to shoot.

Like the S-Mag mid-cap, the high-cap variant is constructed from high density polymer and boasts SA texture on each side to improve wet weather handling. If you want to spend more time shooting and less time reloading, the S-Mag high-cap will perfectly suit your needs!

This 54rnd magazine is designed for AR36 platform Airsoft Electric Guns, and comes included with a set of Bullet Stickers to install behind the semi-transparent plastic, to make your replica look as realistic as possible. Not only this, but multiple magazines can be clamped together for lightning-fast reloads and easier magazine management. A Speedloader is required to fill; the magazine will feed until empty, without any annoying rattle sound.

If you are rocking the big boy SCAR-H AEG from Double Bell you will need some big boy mags to go with it! The Double Bell 400Rnd High capacity magazine is intended for their BY-805 SCAR-H AEG, and is a wheel wound high capacity magazine. The winding wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate. This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength.

If you are rocking the big boy SCAR-H AEG from Double Bell you will need some big boy mags to go with it! The Double Bell 400Rnd High capacity magazine is intended for their BY-805 SCAR-H AEG, and is a wheel wound high capacity magazine. The winding wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate. This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength.

A 300 Round High Capacity Magazine designed for the Cybergun Famas.

If you need magazines for your A&K Dragunov SVD these should fit the bill! The NUPROL 110rnd High-Cap magazine for A&K SVD is designed to work in the A&K Dragunov SVD AEG series but will not work in the CYMA or Real Sword SVDs. The magazine fits the classic SVD aesthetic thanks to its stamped steel shell complete with reinforcing ribs.

The magazine can be filled via the fill window at the top rear of the magazine and the winding wheel is located on the baseplate and needs to be wound in order to tension the magazine. 

If you own the EMG TTI JW4 Gen-12 Automatic Shotgun, you will definitely need some spare magazines. The full-automatic capabilities of that shotgun eat all your ammo reserves within the blink of an eye. A Double Bell 900rnd Hi-Cap Magazine For GEN-12 Series will provide you with another 900 BBs so you can carry on your operations for longer. 900 BBs is no joke, it's basically a whole bottle of BBs in one magazine!

This magazine is a high-cap variant, evidenced by its huge 900rnd capacity. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for quick reloads to stay in the fight. The magazine is constructed from high-density polymer and features a matte black colour and some texturing for a satisfying feel and for ease of loading.

If you need a job lot of magazines for your ST870 and fancy a discount, this is your opportunity! This awesome set of S&T 22rd Magazines is perfect if you need a complete loadout for a long game day of indoor skirmishing. The magazines themselves are constructed from polymer and are the exact same as the magazines that come with the S&T ST870 Pump Action Single Shot Shotgun, meaning they will fit all the S&T ST870 replicas.

Each magazine holds 22 BBs and can be loaded through the fill/feed port on the top of the magazine body using a speed loader. Being low-cap mags, you won't give yourself away with "battle rattle" if you like to move quickly, and the lightweight polymer construction of these mags means your reloads won't be slowed down by big weighty magazines!

A 20rnd spare or replacement Magazine for the CYMA branded CM.706 Airsoft Sniper Rifle. If you want to spend more time set up in your nest and less time walking back to the safe zone for a reload, then you need to stock up on Magazines to prevent you having to give away a good position. Constructed from a mix of Alloy and Polymer, these Magazines can be filled by hand or using a Speedloader, and are a great way to stay in the fight for longer. The design of the Magazine allows them to 'spring' out of the Mag Well when released, making them much easier to remove.

A spare or replacement 50rnd short magazine for the Krytac Kriss Vector, which is made to a high standard with excellent quality Polymers, and features the KRISS trademark as well as faux round count.

An Airsoft Magazine designed for use with Tokyo Marui's Recoil Shock Airsoft TM 417 6mm BB Guns. The magazine is constructed entirely from Heavy Duty Polymer, and features a Transparent Black Shell allowing the user to see through to the Internal Mock rounds which add Realism to the Magazine.

An extended 32 round magazine designed for the WE P-Virus P226 gas blowback pistol. 

With the NUPROL 1200rnd Electric drum magazine, you will have all the firepower necessary to deal with the foes on the battlefield. A massive drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to push back any opponents who dare challenge you.

This drum magazine is constructed from high-density polymer and is the first of its kind for the NGRS system! If you miss the mega capacity of a high-capacity wheel-wound magazine, this is leagues above that. More BBs, more hits... right?

Please note, this drum magazine is ONLY compatible  with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs.

One magazine probably isn't going to be enough for a pistol that has you wanting to keep shooting. This heftily constructed M9A3 magazine holds 22 rounds and takes 12g CO2 bulbs, with a beautiful matt tan finish to match your pistol and also the real deal!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

Stay in the fight for longer with the WELL 30rnd Low-Cap Magazine for MB02/03/07/10 Sniper Rifles! This magazine is made with an alloy shell, polymer internals and a steel feed spring and is designed for WELL-branded VSR-10 clones such as the MB02/03/07/10 series.

This mag is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod. Compatibility-wise, this mag will work in any WELL or WELL PRO VSR-10 clone rifle and may also work in VSR-10 clones made by other brands. If you're running out of rounds before you're back at respawn, grab some WELL 30rnd Low-Cap Magazines for MB02/03/07/10 Sniper Rifles to maximise your K:D ratio!

A 40 Round magazine for the CYMA CM.708 Bolt Action Airsoft Rifle.