Airsoft Magazines

A Steel high capacity clockwork magazine for AR-15 / M4 models of Airsoft Electric Gun, that will fit and feed in 95% of M4 based Airsoft guns.

If you're looking for additional mags for your CYMA SVD/SVU you've come to the right place! Constructed from high-density polymer, these magazines hold 300 BBs so you don't have to carry as many to stay in the fight for longer. The mag features cut grooves on the sides as well as the rear of the mag to aid in gripping, with or without gloves.

It is loaded at the top of the mag using the fill window and being a high cap design means that you will need to rotate the wheel to load BBs onto the spring. Make sure it is completely empty after use to avoid wear and tear on the internal mechanisms of the magazine.

Please note that these mags are specifically for CYMA Airsoft AEGs.

If you need a spare mag for your Double Bell Lee Enfield, here you go! The Double Bell 6 Shell Magazine for SMLE No.1 MK.III Lee Enfield Rifles holds 6 Double Bell Lee Enfield/KAR98K shells (not included) and is compatible specifically with the Double Bell Lee Enfield No.1 MK.III S.M.L.E Bolt Action Sniper Rifle; Shell Ejecting. 

The magazine is constructed from alloy with a gun metal finish which closely matches the real thing. While it may not be the most practical skirmish primary, the fun factor of the shell-ejecting Lee Enfield is off the charts. If you want to keep your Double Bell Rifle No.1 MK.III SMLE well fed, this magazine is what you need!

A CO2 magazine designed for the WE EU-Series pistols, allowing you to make the move from Green Gas to CO2. The magazine is robust and gives excellent power for every shot, built from Alloy the magazine comes with a steel screw in base for extra durability. 

Keep running out of ammo on the battlefield? Stock up on some spare A&K 95-round Mid-Cap SMG-5 AEG Magazines now! These magazines are compatible with a wide variety of SMG-5s, including the CYMA models. It boasts a unique QPQ (Quench Polish Quench) finish, which is a process commonly used in the firearms industry. This gives the magazine a stylish finish and minimises the risk of corrosion.

As this is a 95rnd Mid-Cap magazine, you won't experience any battle-rattle whilst racing around the skirmish field, allowing you and your SMG-5 to remain sneaky, just like the special forces.

If you want to sneak about with your PPSh-41 AEG, ditch that drum magazine and use this instead! The 130rnd Mid-Cap Magazine for SW-09 PPSh-41 AEG from Snow Wolf is authentically constructed with a hefty and solid steel shell to compliment the already very realistic SW-09. This is a mid-cap magazine, meaning no battle rattle to alert the enemy as you advance, and easy loading through the fill/feed port at the top of the magazine body with no need to wind it up. 

This magazine is compatible with the Snow Wolf SW-09 PPSh-41 AEG but unfortunately won't fit the S&T version. If you're a stealthy skirmisher using a Snow Wolf PPSh-41, these magazines are essential!

A replacement or spare Magazine for a RAVEN branded Hi-Capa 4.3 or 5.1. It holds a total of 25rnds and is powered by a 12g CO2 Bulb, which means it works far better in the cold than a Green Gas Magazine. This Magazine will provide much stronger recoil and better shots-per-magazine, especially when Winter is upon us.

A 50rnd Extended Gas Magazine for a range of ASG Gas Replicas, including the B&T USW, the Shadow 2, SP-01 and CZ 75. If you own one of these replicas and want the ability to throw 50 BBs down range in a hurry, then the firepower increase of a 50rnd Magazine cannot be overstated.

If you are running the Well WE23-Mini you will probably want a couple of these on hand to keep up with its intense rate of fire! The WELL PRO 600rnd Magazine for WE23-MINI Minigun holds 600 BBs and winds itself via the internal motor of the Minigun itself, meaning no need to do anything but pull the trigger!

The magazine indexes at the rear and rocks in to lock at the front, similarly to an AK or FAL platform but backwards. The magazine release is located on the front of the mag, taking the form of a button. To fill the mag, you will need to remove the rear plate to expose the fill window by squeezing the two tabs on either side of the central "bar" on the rear plate and removing it, together with its internal spring. Remove the entire assembly, pour your BBs into the mag,  reinstall the rear plate and you are ready to shoot!

The S&T 2500rnd Electric Drum Magazine For S&T/AGM MG42 is a faithful replica of the real steel MG42’s compact 50-round drum magazine, except, it has a whopping 2500 BB capacity! That's like a whole bottle of BBs. This magazine also has some high-tech features, requiring 4x AA batteries, when plugged into your AGM MG42 Airsoft Support Rifle it will wind itself every time the trigger is pulled. This means that all 2500 BBs will be automatically fed into your support rifle without any extra work from you, a seriously useful feature. The electric winding system also reduces the chance of misfeeding, as the BBs will only be fed when one is shot from the MG42.

This steel magazine is just what you need to keep your Airsoft support rifle feeling realistic, it also features a carry handle for easy transport when it's not clipped into your replica.

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

A tough Polymer constructed magazine for a range of CYMA/WELL series Spring Sniper Rifles (check compatibility), which offers a whopping 100rnds to lay down on the enemy from afar. 

If you're running a WELL MB441 Series sniper such as the WELL MB4418-2 WELL MB4418-3, you need a couple of these. The WELL 30rd Low-Cap magazine for WELL MB441 Series Sniper Rifles is constructed with a steel shell, polymer internals and a steel feed spring, showcasing realistic mock reinforcement grooves on each side, just like real steel sniper magazines.

This mag holds 30 BBs and is loaded through the fill/feed port at the top front of the magazine body using a speed loader or loading tool. If you want to keep your Sniper Rifle in the fight for longer, these spare magazines are the key!

Do you need a couple of spare magazines for your Type 38 or Type 97? This is exactly what you are looking for! It is a direct copy of the magazine that comes with the Arisaka rifles and therefore it will be a guaranteed fit. This does however mean that it is ONLY compatible with these rifles and no others.

It is constructed from a high-density polymer and holds 26 BBs, it's the perfect purchase for anyone looking to increase the number of magazines they carry allowing them to remain in the field for longer. Its spring-fed design negates the "battle rattle" effect, allowing you to stay sneakier!

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK74 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong reinforced polymer shell with ribs across all its surfaces, to add strength to the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch for fast and easy reloads. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its shallow curve is a tell-tale sign that this is a 5.45 style AK magazine, for those who like to keep it real!

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK74 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong reinforced polymer shell with ribs across all its surfaces, to add strength to the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch for fast and easy reloads. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its shallow curve is a tell-tale sign that this is a 5.45 style AK magazine, for those who like to keep it real!

Looking to feed your M4/AR-15 AEG? The Evolution 320rnd High-Cap Matrixx Mag™ for M4/AR-15 AEGs is what you need! An essential for any modern styled AR-15, the Matrixx Mag™ is made from strong, high-density polymer, meaning it should survive a drop or two, though we don't recommend doing it intentionally!

This high-cap magazine is loaded through the fill window on top. Simply open the window, pour your BBs in, then wind the winding wheel on the baseplate 5-10 times or until the noise changes. You're now ready to rock.

The highlight of the Matrixx Mag is its dot matrix on the flanks, allowing you to numerically mark your mags or simply style them up with a pretty picture to make them truly yours. If you're after a unique and modern High-cap mag, the Evolution 320rnd High-Cap Matrixx Mag™ for M4/AR-15 AEGs is a sure choice!

A 6mm BB Airsoft magazine, designed for use with Tokyo Marui's SMG-7 AEP electric Airsoft Submachine gun, featuring a medium capacity of 50 rounds. 

If you are loading up on magazines for your M4/AR-15 AEG then you will want to check out the H-Mag from NUPROL. This high density polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool.

This magazine is designed with hexagonal texture on the exterior which adds grip and makes them easier to handle while also adding a touch of modern styling, well suited to cutting-edge setups. This magazine is compatible with most Airsoft M4/AR-15 AEGs, and is a spring-loaded mid-cap, which means no battle rattle to give you away!

If you're looking for spare magazines for your ARCTURUS X C.A.T. PCC SMG, you have found them! The ARCTURUS 105rnd Mid-Cap Magazine for X C.A.T. PCC is constructed from high-density polymer with a steel feed spring and is designed to keep up with the high-rate-of-fire that the FE™ MOSFET provides.

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 105bbs with no battle rattle whatsoever. The bottom of the magazine has a loop to provide extra grip when pulling the magazine from a pouch. If you have treated yourself to an ARCTURUS X C.A.T. PCC series SMG, you need some of these to keep it well fed!

If you're rocking an MG 26(T) for that extra retro vibe on the battlefield, you'll need some of these to keep it fed! The Snow Wolf 110rnd Mid-Cap Magazine is specifically designed for the Snow Wolf MG 26(T) Light Machine Gun Replica AEG and is constructed with a steel shell, polymer internals and a steel feed spring.

Like other Airsoft mid-caps, this mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod. Replicating the real steel MG 26(T)  magazine, these mags are rather massive. Due to their unique size and design, you'll need to find an appropriately sized magazine pouch to fit them!

A green gas magazine designed for the ICS BLE-XFG range of pistols. Holds up to 19 rounds

If you're looking for magazines for your big boy AR, the East Crane 130rnd Steel Mid-Cap Magazine For SR25/AR10 AEG should do the trick! This magazine is constructed with a stamped steel shell and polymer internals, patterned after real steel SR25 20-round magazines and holding 130 BBs. Like other Airsoft mid-caps, this mag is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. 

Compatibility-wise, this magazine is for SR25 AEGs and will not fit standard M4/AR-15 receivers. Patterned after the Classic Army SR25 magazine style, this mag should fit East Crane, Classic Army, CYMA and A&K SR25 AEGs but won't fit G&G SR25s due to their different magazine design. 

An Alloy constructed Gas Powered magazine for the SRC branded TT-33 replica (SR-33). It holds a total of 11rnds and is filled from the bottom with Green Gas via the Inlet Valve. The follower is easy to pull down from the side, and it can be easily loaded by hand or using a Speedloader. Be careful not to let the follower spring up otherwise the feedlips could be damaged.

If you want to be a bit less cumbersome on the battlefield whilst you wield your PPSH-41 AEG then you should consider investing in the S&T 130rnd SW-09 PPSH-41 Steel Magazine. This magazine is a lot smaller than the traditional drum magazine, making it much easier to charge around the battlefield and minimising the dreaded "battle rattle".

The shell has been constructed from solid steel, giving the magazine a hefty realistic feel, it almost feels like the real deal! It is compatible with both the S&T and Snow Wolf PPSH-41 AEGs. The steel feed spring guarantees a much more reliable BB feed as compared to other alloy springs, ensuring that you can fire all 130 BBs with no issues whilst out on the battlefield.

If you like your PPSH-41 AEG, but think the drum mag is just a little bit over the top for your skirmish operations, then the S&T 130rnd SW-09 PPSH-41 Steel Magazine is for you!

This spare magazine for the G&G Armament Piranha gas blowback Airsoft pistol is constructed with a transparent polymer shell with mock 9x19mm cartridges visible within, and is a great way to make your pistol stand out on the field. It is filled with BBs using a speedloader, preferably with a GBB adapter, and can be filled with gas using the fill valve on the baseplate. If you own a G&G Piranha Pistol, then Spare Magazines are an absolute must for staying in the field longer and avoiding the long walk back to the safe zone to reload!

If you need mags for your Novritsch SSQ22 GBBR you have found them! These magazines are styled after real steel 10/22 25-round magazines and are constructed from high density polymer with alloy internals and a steel feed spring. The outer shell of the magazine boasts textured panels to make the mag easier to grip during a speedy reload, and each magazine holds 36 BBs.

Loading the magazine can be done in one of two ways; Either pull the follower on the front of the magazine down to the bottom and load with a speed loader through the loading port on the front, or use a GBB adapter with your speed loader and load through the feed lips at the top of the mag. The gas fill valve is located on the bottom of the mag, and as with all gas magazines, the mag needs to be inverted in order to fill it. These mags work well with the Novritsch SSQ22 but unfortunately are not compatible with the ASG/KJ Works KC-02. If you are planning on running Novritsch's sporty new 10/22 style carbine, a few of these is a must!

If you need more mags for your NUPROL Tango T96, Well MB-06 or ASG Urban Sniper Rifle, this is the one! The NUPROL 24rnd Magazine for Tango Series T96 Spring Sniper Rifle is a spring loaded low-capacity magazine which holds 24 BBs, loaded through the feed lips on the top either by hand or using a speed loader.

This magazine is compatible with the NUPROL Tango Series T96, ASG's Urban Sniper Rifle, the WELL MB-06 Spring Sniper Rifle and the Maruzen APS SR2 Sniper Rifle on which the design is based. If you need more mags to keep your bolt-action in the fight, the NUPROL 24rnd Magazine for Tango Series T96 Spring Sniper Rifle is ideal!

If you have an ARCTURUS AK in your arsenal and are tired of constantly having to reload after every fight, you need this! The ARCTURUS 550rnd Hi-Cap Magazine for ARCTURUS AK Platforms is constructed from high-density polymer with a steel feed spring, designed to match the style of the real steel AK-12 5.45x39mm magazine. Simply fill it with BBs at the fill window on top of the magazine and spin the wheel on the bottom to load the BBs.

On either side of the magazine, we have a grippy, ribbed design and mock witness windows designed to check rounds remaining in its real steel counterpart. The steel baseplate is also angled to allow for "mag-podding". Compatibility-wise, this mag will work with ARCTURUS AK AEGS; other brands' compatibility cannot be guaranteed.

One of the best things about the Jing Gong LK58 Airsoft AEG series is its massive capacity yet short in length magazines, packing 500 rounds into a magazine that will still allow you to keep low in the woods and avoid getting hit. The LK58's 500rnd high-cap magazine is now available as a spare, meaning you can now rock a 1000 BB loadout with only two magazines!

This magazine is constructed with a steel shell and polymer internals and is a wheel or key wound high capacity magazine. The winding wheel can be found on the base plate, and for faster winding, the magazine can also be wound up using the included key, through the winding port on the right side of the magazine body. The fill window is located at the top of the magazine and can be opened by hand. This magazine is designed for the Jing Gong LK58 Airsoft AEG series.