Airsoft Under £50

If you like the lightweight nature of red dot sights but want a bit of zoom, the 2x40 Fixed Power Red/Green Dot Sight from Delta Armory will provide. This red/green dot sight offers a choice of reticle colours and 5 brightness levels for a good view of the ringed dot reticle in any ambient lighting conditions. 

With an integral 20mm Picatinny rail mount, full adjustment for windage and elevation via capped adjustment turrets and generous eye relief, the 2x40 Fixed Power is ideal for those who use an Airsoft assault rifle or SMG and want a better view of their targets at long range!

If you are in the market for a compact and lightweight flashlight, then look no further! The M300B Scout Light; Single Switch Version is a superb choice for skirmishers who fear what hides in the dark, or more specifically, who may hide in the dark. This flashlight comes in two colour variants so you can match it with your loadout to keep everything looking uniform, very tactical!

The flashlight mounts onto the common Picatinny rail using its 20mm rail mount. This means it can be attached on most standard platforms without the need for rail adapters. Keep your operations illuminated with the WADSN M300B Scout Light; Single Switch Version!

If you're running your AAP-01 or AAP-01C as a primary, the Action Army Folding Stock Kit for AAP-01 GBB Pistols provides an extra point of contact for improved accuracy and range and looks fantastic as a bonus! This sleek, minimalist folding stock kit is compatible with the AAP-01 and AAP-01C from Action Army, mounting via the hammer housing pin & rear sight. 

The stock offers length of pull adjustment, an adjustable cheek riser and side folding functionality, making it the equivalent of a SCAR or ACR stock but with a far more compact design well suited to the lightening fast AAP-01. Also moulded as part of the stock base we have a 20mm Picatinny optics rail, allowing you to mount a red dot sight or scope to your AAP to enhance its functionality as a primary. 

Steel QD sling sockets are present on either side of the toe of the stock, along with an additional socket beneath the stock mount, ideally placed for single-point slings. If you love the way your AAP-01 shoots but want to extend your effective range and turn it into a mean little carbine, the Action Army Folding Stock Kit for AAP-01 GBB Pistols is what you need to get the job done!

The Viper Tactical Storm Hoodie blurs the line between Raincoat and everyday Hoodie. With a Water Resistant Hood, Soft Brushed Fleece Lining and a 300gsm Polyester Bonded Ribtech Fleece exterior, this is the perfect companion for any outdoor excursion.

The Viper Tactical Storm Hoodie blurs the line between Raincoat and everyday Hoodie. With a Water Resistant Hood, Soft Brushed Fleece Lining and a 300gsm Polyester Bonded Ribtech Fleece exterior, this is the perfect companion for any outdoor excursion.

The Viper Tactical Storm Hoodie blurs the line between Raincoat and everyday Hoodie. With a Water Resistant Hood, Soft Brushed Fleece Lining and a 300gsm Polyester Bonded Ribtech Fleece exterior, this is the perfect companion for any outdoor excursion.

If you want your hard case to look as good as its contents, the Shadow Foam Insert Pack for Hasta Large Wheeled Rifle Hard Case is essential. These 100% Polyethylene foam inserts are designed specifically for the HASTA Large Wheeled Rifle Hard Case and are supplied as a pack which includes a top and bottom layer in multiple colour options to suit any style!

Shadow Foam has been a big hit amongst power tool owners for quite some time now and mould-braking Airsofters are already using it to give their cases slick looks to match their pride and joy which resides inside. Designed with a unique layered structure that allows it to cut cleanly and peel easily, Shadow Foam is a vast improvement over Cubic PnP foam in several ways, offering a finish closer to unbelievably pricy custom CNC cut foam inserts at a fraction of the cost!

Compared to standard PnP foam, Shadow Foam allows for a far more precise fit when properly cut, avoiding the "Minecraft" look of cubic PnP foam and its tendency to slowly degrade with regular use. Shadow Foam is also denser and far more supportive, keeping your kit cushioned against hard impacts and ultra-stable when transported. Not only that, Shadow Foam is also far easier to clean thanks to its water and common chemical-resistant surface, meaning a simple wipe with a wet cloth will remove any chunks of Airsoft site you may have collected along your adventures!

Colour options range from discrete Grey to eye-catching Red, Purple, Blue, Teal and Pink, giving you the option to make your equipment pop with some striking contrast or opt for a more subtle, professional look. Whether you use your HASTA Large Case for your Airsoft gun, power tools, camera lenses or fishing gear, Shadow Foam's Insert Pack for Hasta Large Wheeled Rifle Hard Case will make jaws drop each time the case opens!

If you are looking for the functionality of a multi reticle reflex optic but with a bit more strength and resistance to drops, consider the Reflex Red/Green Dot sight from PCS. Complete with an aluminium armoured hood, this sight is very much suited to the rigors of heavy use at an Airsoft Skirmish.

A spare magazine for HFC's gas powered Desert Eagle; made as a clone of the Tokyo Marui magazines.

A highly practical and modular backpack, designed to allow airsofters to carry all the essential supplies and kit into a Skirmish with them in a low profile pack. from its low profile design to its many compartments, this bag has almost everything you could need!

A highly practical and modular backpack, designed to allow airsofters to carry all the essential supplies and kit into a Skirmish with them in a low profile pack. from its low profile design to its many compartments, this bag has almost everything you could need!

A highly practical and modular backpack, designed to allow airsofters to carry all the essential supplies and kit into a Skirmish with them in a low profile pack. from its low profile design to its many compartments, this bag has almost everything you could need!

A highly practical and modular backpack, designed to allow airsofters to carry all the essential supplies and kit into a Skirmish with them in a low profile pack. from its low profile design to its many compartments, this bag has almost everything you could need!

A highly practical and modular backpack, designed to allow airsofters to carry all the essential supplies and kit into a Skirmish with them in a low profile pack. from its low profile design to its many compartments, this bag has almost everything you could need!

A highly practical and modular backpack, designed to allow airsofters to carry all the essential supplies and kit into a Skirmish with them in a low profile pack. from its low profile design to its many compartments, this bag has almost everything you could need!

If you're in search of an affordable sniper scope for your Airsoft platform, PCS has just the thing for you! This 4X32 Compact Rifle Scope w/ Scope Rings is constructed from aluminium with a mil-dot reticle. It has a fixed magnification with an adjustable fast-focus dial, so you can quickly swap between foes at different ranges easily. 

Intended for mid to long-range engagements, the PCS 4X32 Compact Rifle Scope w/ Scope Rings has a wide 40mm objective lens, which provides a great view of your surroundings on the battlefield so you can catch all those pesky opponents before they can get the jump on you. The set comes with scope rings included, so you can get straight to work with this budget beast of a sniper scope.

Theta Optics have outdone themselves once again with this low profile red/green dot sight. With 7 brightness settings per colour that's easily adjusted between the two colours, you can make sure you have sight on the enemy no mater the lighting conditions.

The WADSN T-B HL Series Pistol Flashlight is a mighty fine attachment for your trusted sidearm. It is sure to brighten anyone's day, or at least dazzle them long enough that you can shoot before they have time to figure out what hit them. This pistol flashlight features strobe and solid beam modes with the option of regular on/off or a "momentary" mode.

It also comes with polymer adapter inserts so you can attach this flashlight onto most common pistol under barrels. Temporarily impair your opponents with a whopping 700 lumens and gain the upper hand in your skirmishes with the WADSN T-B HL Series Pistol Flashlight.

A 25 Round CO2 Powered Magazine designed for the GLOCK 17 Gen4 by UMAREX.

A replacement magazine for the Scorpion Evo series that holds far more rounds than the standard mag is perfect for the operator who love to suppress the enemy or run lightweight with minimal magazines.

A LiPo crane stock battery designed to fit in stocks and small spaces which other large batteries do not fit.

If you're browsing micro chest rigs and looking for the best out there, this may be it! The Novritsch Modular Chest Rig 1.0 is based on real steel micro-rig designs with enhancements added by the Novritsch Textiles Team, and the result is very impressive.

Making use of the standard micro-rig format of a dual pocket chassis paired with a modular harness and waist strap, the Novritsch team added elasticated sections to the harness for improved flexibility, laser cut MOLLE loops to the front and sides for MOLLE pouch compatibility and breathable mesh fabric padding on all contact points for improved comfort over long durations of wear. Additional points of flexibility in the form of D-rings have also been added to the rear of the unique X-Harness, meaning even if you tighten the rig down you'll still maintain maximum mobility on the field.

The Modular Chest Rig 1.0 is compatible with Novritsch magazine inserts in both the front and rear sections of the chassis, and can also take MOLLE pouches on the front and sides. A dangler pouch like the Novritsch Tactical Fanny Pack can also be added to the front via velcro, and the whole rig can be detached from its harness and mounted to the front of an APSC Plate Carrier. If you want maximum modularity and comfort from your micro-rig, look no further than the Novritsch Modular Chest Rig 1.0!

If you're browsing micro chest rigs and looking for the best out there, this may be it! The Novritsch Modular Chest Rig 1.0 is based on real steel micro-rig designs with enhancements added by the Novritsch Textiles Team, and the result is very impressive.

Making use of the standard micro-rig format of a dual pocket chassis paired with a modular harness and waist strap, the Novritsch team added elasticated sections to the harness for improved flexibility, laser cut MOLLE loops to the front and sides for MOLLE pouch compatibility and breathable mesh fabric padding on all contact points for improved comfort over long durations of wear. Additional points of flexibility in the form of D-rings have also been added to the rear of the unique X-Harness, meaning even if you tighten the rig down you'll still maintain maximum mobility on the field.

The Modular Chest Rig 1.0 is compatible with Novritsch magazine inserts in both the front and rear sections of the chassis, and can also take MOLLE pouches on the front and sides. A dangler pouch like the Novritsch Tactical Fanny Pack can also be added to the front via velcro, and the whole rig can be detached from its harness and mounted to the front of an APSC Plate Carrier. If you want maximum modularity and comfort from your micro-rig, look no further than the Novritsch Modular Chest Rig 1.0!

If you're browsing micro chest rigs and looking for the best out there, this may be it! The Novritsch Modular Chest Rig 1.0 is based on real steel micro-rig designs with enhancements added by the Novritsch Textiles Team, and the result is very impressive.

Making use of the standard micro-rig format of a dual pocket chassis paired with a modular harness and waist strap, the Novritsch team added elasticated sections to the harness for improved flexibility, laser cut MOLLE loops to the front and sides for MOLLE pouch compatibility and breathable mesh fabric padding on all contact points for improved comfort over long durations of wear. Additional points of flexibility in the form of D-rings have also been added to the rear of the unique X-Harness, meaning even if you tighten the rig down you'll still maintain maximum mobility on the field.

The Modular Chest Rig 1.0 is compatible with Novritsch magazine inserts in both the front and rear sections of the chassis, and can also take MOLLE pouches on the front and sides. A dangler pouch like the Novritsch Tactical Fanny Pack can also be added to the front via velcro, and the whole rig can be detached from its harness and mounted to the front of an APSC Plate Carrier. If you want maximum modularity and comfort from your micro-rig, look no further than the Novritsch Modular Chest Rig 1.0!

If you're browsing micro chest rigs and looking for the best out there, this may be it! The Novritsch Modular Chest Rig 1.0 is based on real steel micro-rig designs with enhancements added by the Novritsch Textiles Team, and the result is very impressive.

Making use of the standard micro-rig format of a dual pocket chassis paired with a modular harness and waist strap, the Novritsch team added elasticated sections to the harness for improved flexibility, laser cut MOLLE loops to the front and sides for MOLLE pouch compatibility and breathable mesh fabric padding on all contact points for improved comfort over long durations of wear. Additional points of flexibility in the form of D-rings have also been added to the rear of the unique X-Harness, meaning even if you tighten the rig down you'll still maintain maximum mobility on the field.

The Modular Chest Rig 1.0 is compatible with Novritsch magazine inserts in both the front and rear sections of the chassis, and can also take MOLLE pouches on the front and sides. A dangler pouch like the Novritsch Tactical Fanny Pack can also be added to the front via velcro, and the whole rig can be detached from its harness and mounted to the front of an APSC Plate Carrier. If you want maximum modularity and comfort from your micro-rig, look no further than the Novritsch Modular Chest Rig 1.0!

If you're browsing micro chest rigs and looking for the best out there, this may be it! The Novritsch Modular Chest Rig 1.0 is based on real steel micro-rig designs with enhancements added by the Novritsch Textiles Team, and the result is very impressive.

Making use of the standard micro-rig format of a dual pocket chassis paired with a modular harness and waist strap, the Novritsch team added elasticated sections to the harness for improved flexibility, laser cut MOLLE loops to the front and sides for MOLLE pouch compatibility and breathable mesh fabric padding on all contact points for improved comfort over long durations of wear. Additional points of flexibility in the form of D-rings have also been added to the rear of the unique X-Harness, meaning even if you tighten the rig down you'll still maintain maximum mobility on the field.

The Modular Chest Rig 1.0 is compatible with Novritsch magazine inserts in both the front and rear sections of the chassis, and can also take MOLLE pouches on the front and sides. A dangler pouch like the Novritsch Tactical Fanny Pack can also be added to the front via velcro, and the whole rig can be detached from its harness and mounted to the front of an APSC Plate Carrier. If you want maximum modularity and comfort from your micro-rig, look no further than the Novritsch Modular Chest Rig 1.0!

If you're browsing micro chest rigs and looking for the best out there, this may be it! The Novritsch Modular Chest Rig 1.0 is based on real steel micro-rig designs with enhancements added by the Novritsch Textiles Team, and the result is very impressive.

Making use of the standard micro-rig format of a dual pocket chassis paired with a modular harness and waist strap, the Novritsch team added elasticated sections to the harness for improved flexibility, laser cut MOLLE loops to the front and sides for MOLLE pouch compatibility and breathable mesh fabric padding on all contact points for improved comfort over long durations of wear. Additional points of flexibility in the form of D-rings have also been added to the rear of the unique X-Harness, meaning even if you tighten the rig down you'll still maintain maximum mobility on the field.

The Modular Chest Rig 1.0 is compatible with Novritsch magazine inserts in both the front and rear sections of the chassis, and can also take MOLLE pouches on the front and sides. A dangler pouch like the Novritsch Tactical Fanny Pack can also be added to the front via velcro, and the whole rig can be detached from its harness and mounted to the front of an APSC Plate Carrier. If you want maximum modularity and comfort from your micro-rig, look no further than the Novritsch Modular Chest Rig 1.0!

If you're browsing micro chest rigs and looking for the best out there, this may be it! The Novritsch Modular Chest Rig 1.0 is based on real steel micro-rig designs with enhancements added by the Novritsch Textiles Team, and the result is very impressive.

Making use of the standard micro-rig format of a dual pocket chassis paired with a modular harness and waist strap, the Novritsch team added elasticated sections to the harness for improved flexibility, laser cut MOLLE loops to the front and sides for MOLLE pouch compatibility and breathable mesh fabric padding on all contact points for improved comfort over long durations of wear. Additional points of flexibility in the form of D-rings have also been added to the rear of the unique X-Harness, meaning even if you tighten the rig down you'll still maintain maximum mobility on the field.

The Modular Chest Rig 1.0 is compatible with Novritsch magazine inserts in both the front and rear sections of the chassis, and can also take MOLLE pouches on the front and sides. A dangler pouch like the Novritsch Tactical Fanny Pack can also be added to the front via velcro, and the whole rig can be detached from its harness and mounted to the front of an APSC Plate Carrier. If you want maximum modularity and comfort from your micro-rig, look no further than the Novritsch Modular Chest Rig 1.0!

This is a spare or replacement Magazine for the Krytac KRISS Vector Airsoft Electric Gun, constructed from Polymer and holding a total of 95rnds. It is filled using a Speedloader to feed BBs in through the top of the Magazine, and will feed until empty with zero rattle. Being a Krytac official Magazine, it features all the trademarks it should, as well as a mock capacity-indents like you would see on the real thing.

A large rifle case designed for up to two Airsoft Weapons, and is fully adjustable to suit a range of weapon types.