All Two-Tone Airsoft Guns

Here's a pistol we all know and love. NUPROL brings us aniconic classic Airsoft replica, still widely in use today by a variety of countries for both service and recreational shooting.

A reliable gas blowback pistol, with a lightweight polymer frame and tough alloy slide, this is a go-to tried-and-true pistol for many Airsofters.

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you're looking for an AR-9 platform with a lightweight build and programmable fire controls, allow us to introduce you to the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG. Following in the footsteps of the impressive original FX01 and X-ASR-equipped version, this version is rocking Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best value AR-9 SMG platforms around right now, ready for any challenge that awaits it. Whether you're a new skirmisher looking for the AR-9 shape with more features than the average or a veteran looking for a chance of pace with a lightweight and compact SMG, the Specna Arms SA-FX01 FLEX™ HAL¹ ETU AR-9 AEG will be an asset to you!

If you love the John Wick look but want to skirmish in the cold, this is the JW3 pistol you need! The EMG CM.138 TTI JW3 Hi-Capa Combat Master AEP boasts official licencing from Taran Tactical Innovation which, of course, means gorgeous authentic TTI trademarks across the design. Being an AEP, this JW3 does not have a moving slide and is powered by an internal battery, meaning solid cold-weather performance keeping it on the field long after GBBs have gone into hibernation!

As much a looker as the GBB version, the JW3 AEP is internally based around the Tokyo Marui AEP gearbox design, enhanced with steel gears running on steel ball-bearing bushings. This improves trigger response and rate of fire while giving the JW3 a much smoother firing noise than other AEPs, not to mention a longer lifespan due to reduced stress on the gearbox shell.

Also inside is CYMA's AEP MOSFET, allowing 7.4V LiPo batteries to be used for a genuinely competitive semi-auto response rate and respectable full-auto fire rate, ideal for snipers looking for a compact and reliable backup platform or pistol aficionados wanting to skirmish to full effect without worrying about GBB cool-down in winter. If you're still wearing your tux when the frost sets in, the EMG CM.138 TTI JW3 Hi-Capa Combat Master AEP belongs in your holster!

If you're just starting your Airsoft journey and looking for an affordable lightweight polymer build M4/AR-15 AEG with programmable fire controls, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

The internals of the DA-C05-EGL are similar to the original CHARLIE™ series, but the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced primary, for an entry-level price!

For those seeking a lightweight, yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is one to watch!

If you're just starting your Airsoft journey and looking for an affordable lightweight polymer build M4/AR-15 AEG with programmable fire controls, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

The internals of the DA-C05-EGL are similar to the original CHARLIE™ series, but the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced primary, for an entry-level price!

For those seeking a lightweight, yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is one to watch!

If you're just starting your Airsoft journey and looking for an affordable lightweight polymer build M4/AR-15 AEG with programmable fire controls, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

The internals of the DA-C05-EGL are similar to the original CHARLIE™ series, but the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced primary, for an entry-level price!

For those seeking a lightweight, yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is one to watch!

If you've got your ear to the ground on the latest Airsoft releases, you can't have missed the LevAR 15" from G&G! This innovative platform is powered by green gas, making use of G&G M4/AR-15 AEG upper receivers providing almost unlimited customisation options and the chance to make this lever action "Space Cowboy" rifle truly yours.

The LevAR 15" is confirmed to be compatible with G&G M4 AEG upper receivers, allowing you to configure it how you want, from a long sniper rifle-style setup to a compact and agile scout rifle perfect for mobile marksmen. Powered by green gas using an internal gas reservoir, the LevAR 15" also boasts a 1913/20mm Picatinny stock interface, meaning the stock can be swapped or removed entirely. Now we have a sample LevAR-15 in our hands, we can confirm that the 1913 interface is set at an angle, so aftermarket 1913 stocks will fit but look funky. We expect G&G will release a range of specific stocks for this interface so stay tuned for more intel!

Our batch of LevAR 15" Gas Powered Lever Action Rifles is due later this year, so sign up for an email stock alert and get in before the rush if you want to be one of the first in the country running this beast. If you need more information before you make the call, check out the full description for all the nitty gritty details!

If you've got your ear to the ground on the latest Airsoft releases, you can't have missed the LevAR 15" from G&G! This innovative platform is powered by green gas, making use of G&G M4/AR-15 AEG upper receivers providing almost unlimited customisation options and the chance to make this lever action "Space Cowboy" rifle truly yours.

The LevAR 15" is confirmed to be compatible with G&G M4 AEG upper receivers, allowing you to configure it how you want, from a long sniper rifle-style setup to a compact and agile scout rifle perfect for mobile marksmen. Powered by green gas using an internal gas reservoir, the LevAR 15" also boasts a 1913/20mm Picatinny stock interface, meaning the stock can be swapped or removed entirely. Now we have a sample LevAR-15 in our hands, we can confirm that the 1913 interface is set at an angle, so aftermarket 1913 stocks will fit but look funky. We expect G&G will release a range of specific stocks for this interface so stay tuned for more intel!

Our batch of LevAR 15" Gas Powered Lever Action Rifles is due later this year, so sign up for an email stock alert and get in before the rush if you want to be one of the first in the country running this beast. If you need more information before you make the call, check out the full description for all the nitty gritty details!

If you love the standard issue US Army M4A1 carbine, this should suit you! The Delta Armory DA-C03 CHARLIE™ M4A1 RAS AEG is styled after the M4A1 as it is issued to the US Army, featuring a RAS style quad 20mm railed handguard, M4A1 barrel profile with M203 cutout and the iconic AR-15 triangular front sight, along with some thoughtful modern ergonomic enhancements to improve handling. 

On the outside, Delta has added a gunfighter mod.3 style ergonomic pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C03 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight and maintain peak agility in game. 

On the inside, the DA-C03 is kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. Needless to say, this platform is superb value considering its features and is the perfect AEG for a new skirmisher who wants a cost-effective primary without any performance compromises!

If you're looking for a sniper rifle with more than its fair share of robust internal components, the Delta Armory M24 R700 Spring Bolt Action Sniper Rifle is a fine choice. Externally based on the real steel M24 sniper rifle hybridized with the R700 sporting rifle, Delta's M24 is designed for mobility, keeping weight to an absolute minimum and trimming off any unnecessary frills which add more weight than their worth.

Inside, we are equipped with a CNC Steel cylinder, CNC aluminium piston, 90-degree sear and CNC steel spring guide, giving you the parts you need to keep the M24 running in the long run and avoiding the usual affordable sniper rifle hurdle of whacking a super strong spring into a platform that isn't ready for it. Though the M24 may use its own unique internal system, the HOP-up rubber is compatible with aftermarket VSR/GBB rubbers so the upgrade fiends can get their fix. If you want to sample sniping but don't want to get in too deep with an expensive primary, the Delta Armory M24 R700 Spring Bolt Action Sniper Rifle is a fantastic option!

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK16 SCAR-L replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-L. Externally, this SCAR-L is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-L into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET will do the trick!

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK16 SCAR-L replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-L. Externally, this SCAR-L is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-L into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET will do the trick!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

If military-style M4s are your poison and you need a new platform for close quarters, the DA-C02 CHARLIE™ M4/AR-15 CQBR AEG is a sure choice. This AEG is styled after the CQBR (Close Quarters Battle Receiver) configuration of the M4A1 rifle, a drop-in upper receiver kit issued to Army Rangers, Delta Force and Navy Seals, fitted with a 10.5-inch outer barrel and KAC RAS Style quad railed handguard.

To furnish the CQBR M4 configuration with some modern ergonomics, Delta has added a gunfighter mod.3 style pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C02 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight so you can make energetic advances all day long.

Internally, the DA-C02 is generously kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. If you need a solid, lightweight workhorse of an M4 platform with plenty of future upgrade and customisation options, the DA-C02 CQBR is exactly that. A platform this price has no business being so good straight out of the box!

If military-style M4s are your poison and you need a new platform for close quarters, the DA-C02 CHARLIE™ M4/AR-15 CQBR AEG is a sure choice. This AEG is styled after the CQBR (Close Quarters Battle Receiver) configuration of the M4A1 rifle, a drop-in upper receiver kit issued to Army Rangers, Delta Force and Navy Seals, fitted with a 10.5-inch outer barrel and KAC RAS Style quad railed handguard.

To furnish the CQBR M4 configuration with some modern ergonomics, Delta has added a gunfighter mod.3 style pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C02 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight so you can make energetic advances all day long.

Internally, the DA-C02 is generously kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. If you need a solid, lightweight workhorse of an M4 platform with plenty of future upgrade and customisation options, the DA-C02 CQBR is exactly that. A platform this price has no business being so good straight out of the box!

If you want to start your Airsoft adventure with a realistic full metal platform or you have your eye on an MK18 MOD.1, the Delta Armory MK18 MOD.1 ALPHA™ should suit you! This AEG is based on the standard issue rifle of the US Navy SEALs but with some modern external enhancements mimicking high-end civilian tactical setups. 

Being an AEG of the ALPHA™ line, this MK18 MOD.1 is considerably pre-upgraded straight out of the box, boasting a reinforced gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. 

With more Picatinny rails than you'll ever need, a unique modern receiver design and the impressive Delta Armory battery stock, the MK18 MOD.1 ALPHA™ is perfect for skirmishers who want the realistic feel of full metal and the performance to back it up!

If you've been keeping up with anything Airsoft, you must be excited about this one! The Vorsk VMP-2D is here and this gas blowback DMR rifle is a game changer. Out of Vorsk's new line, this variant is the big boy, the full-fat DMR version. Equipped with a longer M-LOK handguard, extended outer barrel, and marksman stock with an adjustable cheek riser, this is the VMP-2 for long-range specialists. With a locked semi-auto function, this rifle delivers precise shots at up to 450 FPS with 0.2g BBs, making it a powerful choice for any marksman.

The VMP-2 is compatible with standard VMP-1/MP9 magazines and makes use of a unique chassis system with QD sling sockets on each side. It is compatible with M4/AR-15 GBBR pistol grips and features mounts for the prolific M4/AR-15 buffer tube at the rear. The D variant features a fixed marksman-style stock with an adjustable cheek riser which is exactly what you need to get a good view of your target down a rifle scope!

The HOP-up unit has a unique design with an external TDC adjuster, perfect for convenient mid-game setting changes to keep up with the versatile conditions, not to mention being an inherently accurate and precise design. The HOP-up bucking and inner barrel are also VSR-10 spec, giving you almost unlimited options for tuning performance to meet your needs.

If you are working on your Special Forces loadout but you haven't had time to hit the gym, Delta Armory has the MK18 for you! The DA-B15-ETU BRAVO™ is styled to match the real MK18 MOD.1 rifle issued to US Navy SEALs and Delta Force but is far lighter and handier than full metal versions thanks to its combination of a CNC aluminium handguard and alloy outer barrel with a high density polymer receiver and buffer tube. 

Inside, this MK18 MOD.1 is rather special, being fully upgraded internally with little room for more. Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, a high torque motor and a programmable ETU/MOSFET system to keep it all in check. The ETU also allows for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response. If you want the looks of the MK18 without the weight, the DA-B15-ETU BRAVO™ brings the MK18 styling along with incredible performance!

If you're looking for a specialised entry tool as the pointman for your team, you can't ask for much better than the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun. This licenced replica of the real steel STF 12 Short Initial boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets and getting the first kill as your team breaches a room in CQB.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its ergonomic pistol grip and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

If you're a Milsim skirmisher seeking a breaching shotgun for close encounters or a CQB specialist needing a platform to get the first shot when bursting into a room, the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun will give you what you need!

If you're in search of a lightweight and high performance platform with the AR-9 aesthetic, the G&G ARP9 2.0 Enhanced Combat Machine AEG can't have escaped your scrutiny! This is the second generation of G&G's superb ARP9 platform, boasting several internal refinements for even more performance and an external overhaul including the G&G GOS-V9 PDW stock and a new CNC aluminium M-LOK handguard.

We think this is the best-looking ARP9 variant yet but also offers more attachment interfaces thanks to its longer handguard and even better results downrange than its still respectable older sibling. Internal improvements include a new generation of ETU and MOSFET made more efficient and compact than ever before, a further reinforced gearbox shell, a redesigned bevel gear to reduce heat build-up and a double O-ring nozzle to enhance air seal qualities. Also present is G&G's latest rotary HOP-up unit, bringing the ARP9 into line with modern Airsoft releases, offering improved setting retention and finer adjustment increments.

The original ARP9 was famously the winner of the Airsoft Players Choice Awards for best AEG several years on the trot and in our assessment, the second generation is even better. If you're after a lightning-fast CQB platform which handles like a dream and gives the enemy team nightmares, the G&G ARP9 2.0 Enhanced Combat Machine AEG is what you need!

If you like to tiptoe around the skirmish site and catch the enemy off guard, Delta Armory has the perfect AEG for you! Introducing the DA-B04 Silent Ops 8, an M4/AR-15 AEG of the Delta Armory BRAVO™ series. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Internally, the DA-B04 is very well equipped for the price, boasting a 6.03mm tightbore inner barrel, rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. Whether you run it as it is or plan on upgrading it top to bottom, the Silent Ops 8 from Delta Armory will serve you well!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you've been checking out MK18 MOD.1 AEG platforms, the Delta Armory DA-A07-ETU ALPHA™ MK18 MOD.1 M4/AR-15 AEG is yet another fantastic option to weigh up. This MK18 MOD.1 AEG adds an enhanced receiver to the Milspec MK18 mix, providing a tasty combination of a proven design with extra consideration given to ergonomics and handling.

Being an AEG of the ALPHA™ line, this beast boasts full metal construction and the best internals Delta Armory has to offer, including the impressive programmable MOSFET/ETU system. Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, and a high torque motor. The ETU expands on these superb internals by allowing for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response.

If a MK18 MOD.1 will be your next buy, you have one heck of a decision to make! If you like advanced internals to go with the MK18 aesthetic, you cannot go wrong with the DA-A07-ETU ALPHA™ from Delta Armory!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ II ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus  purple hop rubber was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ II ETU. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!