All Two-Tone Airsoft Guns

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

If you've been keeping up with anything Airsoft, you must be excited about this one! The Vorsk VMP-2D is here and this gas blowback DMR rifle is a game changer. Out of Vorsk's new line, this variant is the big boy, the full-fat DMR version. Equipped with a longer M-LOK handguard, extended outer barrel, and marksman stock with an adjustable cheek riser, this is the VMP-2 for long-range specialists. With a locked semi-auto function, this rifle delivers precise shots at up to 450 FPS with 0.2g BBs, making it a powerful choice for any marksman.

The VMP-2 is compatible with standard VMP-1/MP9 magazines and makes use of a unique chassis system with QD sling sockets on each side. It is compatible with M4/AR-15 GBBR pistol grips and features mounts for the prolific M4/AR-15 buffer tube at the rear. The D variant features a fixed marksman-style stock with an adjustable cheek riser which is exactly what you need to get a good view of your target down a rifle scope!

The HOP-up unit has a unique design with an external TDC adjuster, perfect for convenient mid-game setting changes to keep up with the versatile conditions, not to mention being an inherently accurate and precise design. The HOP-up bucking and inner barrel are also VSR-10 spec, giving you almost unlimited options for tuning performance to meet your needs.

A hilarious and awesome little Russian style non-blowback gas powered pistol, which is great as a concealed carry for search and rescue games where you are likely to be searched once captured.

Alloy constructed and brimming with old-world class, the HFC HG-131B Revolver is a gas powered replica with a swing out chamber that holds 6 individual shells for an authentic firing experience.

The revolver features classic open ironsights on the top and a textured faux wood polymer grip with a tactile feel, coupled with the finger ridged front part of the grip for a satisfying hold and superior handling.

If you're looking for something a little more old-school that functions and handles much like the real deal, think about picking this up to add to your collection of classics.

If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking.

For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding.

If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!

Whether you are a Novritsch fan or simply appreciate a lightweight, performance-oriented AR platform you must be dying to get your hands on the SSR4! This M4/AR-15 platform Airsoft gun has been designed by Novritsch's team in Austria to provide the accuracy, range, and rate of fire to dominate an Airsoft skirmish if you have the skills to back it up!

This version of the SSR4 is the polymer version, constructed with a high density polymer handguard and receiver to keep the platform light and agile while boasting the same phenomenal pre-upgraded internal feature set of the full metal version.

Inside, you will find a 6.03mm tightbore inner barrel, rotary HOP-up unit, reinforced version 2 gearbox with CNC steel gears, a steel quick change spring guide and of course, the pre-installed MOSFET trigger system which allows for programmable fire modes, adjustable pre-cocking and also provides a boost in ROF and trigger response. If you are looking for an Airsoft AEG platform to help you reach your peak of Airsoft gameplay, this could be the one!

Whether you are a sniper looking for a compact AEG backup or want something short and light to take advantage of your agility, the Cybergun P90 is perfect for the job. This AEG boasts full metal construction, realistic trademarks licenced by FN Herstal itself and ambidextrous controls, perfect for left-handed shooters or those who like to shoot from both shoulders to make the best use of cover.

The internals are based around the TM P90 design, meaning a version 6 gearbox, rotary HOP-up unit and full compatibility with aftermarket upgrades for the TM P90. Also fitted are a 6.03mm tightbore inner barrel for an improvement in accuracy potential and 8mm bushings for a smoother gearbox report and a slight increase in rate of fire. If you like to move fast and crawl in the woods, the P90 is your best friend!

For those of you who prefer the old ways, this iconic beast of a revolver features a fully revolving revolving drum holding six shells. With a  4 inch barrel it is compact but still with a sturdy feel thanks to it's full metal alloy construction and is powered by green gas.

If you like to be at the cutting edge of Airsoft development, you're going to need this! The CYMA CM.136 Grach EBB; MOSFET Edition is an extremely innovative new form of Airsoft Electric Pistol which boasts an electric blowback system. Those old hats out there will have their preconceptions around EBB pistols, but make no mistake, this is nothing like the AAA battery-powered EBB pistols of old!

Thanks to its low resistance wiring, pre-installed MOSFET, ball bearing bushings and innovative battery in magazine design, the blowback is incredibly fast, allowing for rapid double taps and near-GBB-like speed. Trust us, when you shoot this thing you will be grinning from ear to ear!

If you want to start your Airsoft adventure with a muffled bang, the Delta Armory DA-C05 CHARLIE™ Silent Ops 7 will do it. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a 7-inch quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the Silent Ops 7 serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long range effectiveness.

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C05 is the best AR in this style and price range we have seen!

If you want to start your Airsoft adventure with a muffled bang, the Delta Armory DA-C05 CHARLIE™ Silent Ops 7 will do it. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a 7-inch quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the Silent Ops 7 serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long range effectiveness.

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C05 is the best AR in this style and price range we have seen!

If you want to start your Airsoft adventure with a muffled bang, the Delta Armory DA-C05 CHARLIE™ Silent Ops 7 will do it. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a 7-inch quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the Silent Ops 7 serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long range effectiveness.

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C05 is the best AR in this style and price range we have seen!

If you're in search of a stylish and high-speed SMG, it doesn't get much better than this! This iteration of the CYMA Platinum CM.041G SMG-5 includes all the tasty internals you would expect from a CYMA Platinum series AEG but this one comes with the esteemed Eshooter Kestrel Basic MOSFET, taking the gameplay potential to a whole new level.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. The other CYMA Platinum internals include 13:1 ratio high-speed gears running on 8mm ball-bearing bushings, a CNC aluminium "silent" ball-bearing piston head, double O-ring cylinder head, quick change ball-bearing spring guide and a high-speed motor to top it off! 

The CM.041G is an impressive platform, great for breaching buildings but also offering some impressive long-distance shooting, rivalling most out-of-the-box M4s in terms of range and accuracy. The CYMA Platinum CM.041G SMG-5 AEG; Kestrel Basic ETU is one of the finest choices for any skirmisher looking to up their game!

If you're a practical skirmisher seeking a lightweight and cost-effective primary ready to host the most modern accessories, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is one to watch. Being part of Specna's FLEX™ line, this AEG is constructed almost entirely from high density polymer with a solid alloy outer barrel, ideal for mobile, agile and hostile playstles!

Inside, we are treated to Specna's latest programmable MOSFET, known as the HAL¹. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-F08, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight increase in FPS from the same strength spring.

On the outside, the SA-F08 is equipped with a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor, an M-LOK handguard for your mission essential doo-dads, grips and other handling enhancements and a 20mm Picatinny railed receiver, ready for your choice of optical sight. If you're looking for an affordable entry point to Airsoft which will keep you competitive, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is a fantastic choice!

If you're a practical skirmisher seeking a lightweight and cost-effective primary ready to host the most modern accessories, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is one to watch. Being part of Specna's FLEX™ line, this AEG is constructed almost entirely from high density polymer with a solid alloy outer barrel, ideal for mobile, agile and hostile playstles!

Inside, we are treated to Specna's latest programmable MOSFET, known as the HAL¹. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-F08, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight increase in FPS from the same strength spring.

On the outside, the SA-F08 is equipped with a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor, an M-LOK handguard for your mission essential doo-dads, grips and other handling enhancements and a 20mm Picatinny railed receiver, ready for your choice of optical sight. If you're looking for an affordable entry point to Airsoft which will keep you competitive, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is a fantastic choice!

If you're in the market for an affordable M4/AR-15 AEG with programmable fire controls and a lightweight polymer build, the Delta Armory DA-C06 CHARLIE™ Silent Ops M4/AR-15 AEG is what you need. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the DA-C06 CHARLIE™ serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long-range effectiveness. 

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C06 is the best AR in this style and price range we have seen!

If you're in the market for an affordable M4/AR-15 AEG with programmable fire controls and a lightweight polymer build, the Delta Armory DA-C06 CHARLIE™ Silent Ops M4/AR-15 AEG is what you need. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the DA-C06 CHARLIE™ serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long-range effectiveness. 

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C06 is the best AR in this style and price range we have seen!

If you like to tiptoe around the skirmish site and catch the enemy off guard, Delta Armory has the perfect AEG for you! Introducing the DA-B04 Silent Ops 8, an M4/AR-15 AEG of the Delta Armory BRAVO™ series. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Internally, the DA-B04 is very well equipped for the price, boasting a 6.03mm tightbore inner barrel, rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. Whether you run it as it is or plan on upgrading it top to bottom, the Silent Ops 8 from Delta Armory will serve you well!

If you need a light and tight AR PDW platform but nothing on the market currently scratches that itch, the Double Eagle M923G DEX556 may well be the one! This M4/AR-15 style AEG is constructed primarily from high density polymer with alloy and aluminium parts where needed and is packing the seriously slick Double Eagle FALCON EFCS MOSFET pre-installed for a frightening trigger response, 11.1V LiPo compatibility and a crazy rate of fire.

To deliver rounds accurately onto your unfortunate target, a 6.04mm tightbore inner barrel paired with a rotary HOP-up unit is fitted, giving you a head start over many M4/AR-15 AEGs in this price range with a raise in FPS and accuracy from the tightened bore and more effective HOP-up performance to extend your range. Whether you are in search of a new CQB primary or you like to fight light and aggressively outdoors, the Double Eagle DEX556 will see you well equipped!

If you need a light and tight AR PDW platform but nothing on the market currently scratches that itch, the Double Eagle M923G DEX556 may well be the one! This M4/AR-15 style AEG is constructed primarily from high density polymer with alloy and aluminium parts where needed and is packing the seriously slick Double Eagle FALCON EFCS MOSFET pre-installed for a frightening trigger response, 11.1V LiPo compatibility and a crazy rate of fire.

To deliver rounds accurately onto your unfortunate target, a 6.04mm tightbore inner barrel paired with a rotary HOP-up unit is fitted, giving you a head start over many M4/AR-15 AEGs in this price range with a raise in FPS and accuracy from the tightened bore and more effective HOP-up performance to extend your range. Whether you are in search of a new CQB primary or you like to fight light and aggressively outdoors, the Double Eagle DEX556 will see you well equipped!

For those with a thing for the classic utilitarian style of the AK platform who need a rifle for CQB duties, the AKS-74U has your name on it! The CM.045 High-Speed from CYMA takes the original CM.045's superb externals and drops in a 13:1 steel gearset, high-speed motor, silent piston and cylinder head with a polycarbonate piston with steel teeth to provide a pre-upgraded speed demon of an AK! To sweeten the deal, this AKS-74U comes with real wood handguards and a "bakelite" style magazine, matching the first generation of the AKS-74U and the most common variant seen in the hands of militaries, rebel groups and civilians worldwide.

If you like the B9 shape and want the latest version, check out the RAVEN R9A4. This full metal GBB pistol is based on the latest iteration of the iconic B9, boasting a threaded barrel for suppressors and tracers, a refined grip angle with the latest V-tec style grips and an optics-ready slide. 

The R9A4 keeps the best of the older R9 variants, including its 6.03mm tightbore inner barrel, and gives the venerable B9 a modern makeover so it can go toe to toe with the latest Glock, Hi-Capa and Sig platforms. If you like your pistols at the cutting edge but want to sidestep the most common platforms, the R9A4 is perfect for you!

If you're in search of a lightweight and high performance platform with the AR-9 aesthetic, the G&G ARP9 2.0 Enhanced Combat Machine AEG can't have escaped your scrutiny! This is the second generation of G&G's superb ARP9 platform, boasting several internal refinements for even more performance and an external overhaul including the G&G GOS-V9 PDW stock and a new CNC aluminium M-LOK handguard.

We think this is the best-looking ARP9 variant yet but also offers more attachment interfaces thanks to its longer handguard and even better results downrange than its still respectable older sibling. Internal improvements include a new generation of ETU and MOSFET made more efficient and compact than ever before, a further reinforced gearbox shell, a redesigned bevel gear to reduce heat build-up and a double O-ring nozzle to enhance air seal qualities. Also present is G&G's latest rotary HOP-up unit, bringing the ARP9 into line with modern Airsoft releases, offering improved setting retention and finer adjustment increments.

The original ARP9 was famously the winner of the Airsoft Players Choice Awards for best AEG several years on the trot and in our assessment, the second generation is even better. If you're after a lightning-fast CQB platform which handles like a dream and gives the enemy team nightmares, the G&G ARP9 2.0 Enhanced Combat Machine AEG is what you need!

If you are working on your Special Forces loadout but you haven't had time to hit the gym, Delta Armory has the MK18 for you! The DA-B15-ETU BRAVO™ is styled to match the real MK18 MOD.1 rifle issued to US Navy SEALs and Delta Force but is far lighter and handier than full metal versions thanks to its combination of a CNC aluminium handguard and alloy outer barrel with a high density polymer receiver and buffer tube.

Inside, this MK18 MOD.1 is rather special, being fully upgraded internally with little room for more. Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, a high torque motor and a programmable ETU/MOSFET system to keep it all in check. The ETU also allows for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response. If you want the looks of the MK18 without the weight, the DA-B15-ETU BRAVO™ brings the MK18 styling along with incredible performance!

With this simple trick, you can turn one gun into two guns! The M203 under-barrel grenade launcher is heavy, manly, and ready to shower an unlucky opponent with a cloud of BBs! This is the 9 Inch short variant, ideally suited to mounting to an M4A1 with a 14.5-inch or 10.5-inch barrel, though it will fit all M4 variants and anything with a 20mm rail on the handguard (or elsewhere, heretics!) with the included 20mm Picatinny rail adaptor.

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-FH06 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is a great choice. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH06 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-FH06 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is a great choice. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH06 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point!

If you're in the market for an affordable M4/AR-15 AEG with programmable fire controls and a lightweight polymer build, the Delta Armory DA-C06-EGL CHARLIE™ Silent Ops M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

While the internals of the DA-C06-EGL are similarly equipped to the original CHARLIE™ series, the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price!

Those seeking a lightweight yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C06-EGL CHARLIE™ Silent Ops M4/AR-15 AEG is one to watch!

As seen in the immensely popular Battlefield game series, among many more, this is often the go-to rifle for aspiring snipers, with this new upgraded version shooting at a beastly 500FPS, straight out of the box.

Based on the M24 platform, this is spring powered bolt action replica with a full metal build with a lengthy adjustable buttstock. This is a great, budget-friendly Airsoft sniper for those of you looking to start your sniper loadout or if find yourself playing more outdoor skirmishes.

If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news!

The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!