All Two-Tone Airsoft Guns

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you are having a tough time deciding between all the modern handgun designs out there, and you aren't sure whether to go for a PPQ, M&P or Glock, now you no longer need to decide! The CANiK TP9 is a very recent handgun designed in Turkey and manufactured in the USA which takes the things people love about other platforms and combines them to make one of the most ergonomically pleasing pistols we have ever handled. To sweeten the deal, the EMG TP9 Elite Combat comes with a 14mm CCW male threaded outer barrel, a magazine well flare and a 20mm Picatinny frame rail, meaning the TP9 is ready for any battlefield role you have in mind!

If you're looking for a full metal sidearm with a custom aesthetic, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is a fantastic choice. Based around Tokyo Marui's EU series internal design but rocking a stylish ported metal slide, light enhancing front iron sight and imitation hand-stippled frame, this EU17 is dressed to impress!

A sophisticated alternative to plane Jane EU17 pistols, the P01 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you aren't into the boring military/police pistol look, the P01 was made with you in mind. Supplied in a hard polymer pistol case complete with internal wave foam, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is not only superb value but shoots like a champ too!

If you're looking for an AR-15 with a unique look, you've found it! Built in partnership between ActionSportGames, ICS and HERA ARMS this rifle is an Airsoft gun like no other. Based on the AR-15 Mil-spec variant of the HERA ARMS CQR this rifle uses ICS's brand new SSS AEG Gearbox design and is officially licensed and fully trademarked.

The Airsoft replica itself is constructed from a mixture of high quality alloys and polymers, with an Alloy Receiver, Handguard Outer Barrel and Internals, with a Polymer Stock, Magazine, Foregrip and Flip-up Iron Sights. The rifle features a high quality finish, with heavy duty materials leading to a highly detailed and realistic looking rifle. The rifle isn't just a quality build, it also come fully trademarked with all the textual markings and logo shown on the real rifle for higher levels of realism.

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!

If you like compact sidearms with an elite look, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight is one to watch. This full metal Hi-Capa platform marries the 3.8-inch barrel length of the most compact Hi-Capa pistols with the full-sized 5.1 frame, giving you the design philosophy of the Glock 19X in Hi-Capa form.

Like other Hi-Capas in the VORSK CS range, the Hi-Capa Vengeance Compact boasts full metal construction, a 6.03mm tightbore inner barrel to enhance accuracy and a threaded outer barrel with a 14mm thread adapter so you can mount a tracer right away. This, the "BDS" version is also equipped with a red dot sight, pre-installed on a fixed position mount for fast target acquisition and even faster follow-up shots when compared to pistols equipped with a slide-mounted red dot sight.

If owning a customised Hi-Capa is on your list, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight has done all the work for you! With the high-end aesthetic on the outside and a 6.03mm tightbore barrel on the inside, the Vengeance Compact with red dot sight is ready to rock either as a sidearm or a CQB primary!

This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.

If you're just getting into Airsoft and prefer a military-style primary, set your sights on the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG! This CQBR (Close Quarters Battle Receiver) style replica is constructed predominantly from high density polymer with an alloy outer barrel, front sight and handguard mounting hardware along with steel trim parts. This keeps the build lightweight and ideal for younger skirmishers or those with a speedy, aggressive playstyle!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If your tastes dictate a military style primary and you need something cheap but effective to get started, the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG is a fantastic choice!

If you're just getting into Airsoft and prefer a military-style primary, set your sights on the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG! This CQBR (Close Quarters Battle Receiver) style replica is constructed predominantly from high density polymer with an alloy outer barrel, front sight and handguard mounting hardware along with steel trim parts. This keeps the build lightweight and ideal for younger skirmishers or those with a speedy, aggressive playstyle!

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges with an accuracy advantage using high quality BBs. If your tastes dictate a military style primary and you need something cheap but effective to get started, the NUPROL Delta Pioneer SOPMOD M4/AR-15 AEG is a fantastic choice!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ II ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus  purple hop rubber was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ II ETU. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

There has been a lot of fuss made about this particular AEG online, and let us tell you, the hype is real! The Krytac P90 AEG combines the P90s radical design with Krytac's industry expertise to produce the best performing P90 out there, with an unrivalled feature set and bomb-proof internals.

Straight out the insanely popular video games series Resident Evil, this pistol makes sure you're ready for the inevitable zombie apocalypse (or zombie themed skirmish).

With full metal construction and flashy silver slide, the Biohazard comes with a whole host of features including an aggressive muzzle device, front Picatinny rail, de-cocker and extended mag.

Zombies or no zombies, this pistol will leave the competition dead and buried.

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

The JG M5 SD5 is an integrally suppressed SMG-5 AEG featuring a polymer body and full sized battery stock. A very popular style of Airsoft rifle due to its widespread use by sneaky types of many militaries, great for some discrete CQB kills! 

If you are fan of historical rifles, or you partake in historical re-enactment, get excited, that's an order! The Lee Enfield Rifle No.1 MK.III has just dropped in Airsoft form! The S&T S.M.L.E is authentically constructed, with a real wood stock and metal wherever there is metal on the real rifle and is indistinguishable from the real thing in all ways but one; this one fires 6mm BBs!

Spare magazines are available here.

A Gas Blowback Airsoft Pistol that is based on the AAP / EU Series, giving you the cool design of a Ruger-style Pistol, with the tough and realistic construction of a WE Pistol, and all the Semi/Full Auto fun you could want! This space-age Pistol comes supplied with a top and underside 20mm Rail, as well as a Threaded Barrel and Low Light Ironsights, making this a strong choice for any Airsoft player wanting to make a statement.

A Gas Blowback Airsoft Pistol that is based on the AAP / EU Series, giving you the cool design of a Ruger-style Pistol, with the tough and realistic construction of a WE Pistol, and all the Semi/Full Auto fun you could want! This space-age Pistol comes supplied with a top and underside 20mm Rail, as well as a Threaded Barrel and Low Light Ironsights, making this a strong choice for any Airsoft player wanting to make a statement.

A Gas Blowback Airsoft Pistol that is based on the AAP / EU Series, giving you the cool design of a Ruger-style Pistol, with the tough and realistic construction of a WE Pistol, and all the Semi/Full Auto fun you could want! This space-age Pistol comes supplied with a top and underside 20mm Rail, as well as a Threaded Barrel and Low Light Ironsights, making this a strong choice for any Airsoft player wanting to make a statement.

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

If you're in the market for a menacing pump-action shotgun but need something at the cutting edge, the KelTec KSG Bullpup Gas Shotgun from EMG will suit your needs perfectly! Based on the real steel KelTec KSG, a mould-breaking bullpup shotgun design with dual magazine tubes, the EMG version is full metal and powered by green gas, offering the choice of 3 or 6 BBs per shot for a realistic shotgun-style spread!

Thanks to official licencing from KelTec, the EMG KSG is littered with authentic KelTec trademarks matching the real thing perfectly and includes the iconic KelTec squared texture on the pump grip and pistol grip. Inside, we have Tokyo Marui-based internals with a fixed HOP-up optimised for 0.25g BBs, capable of hitting man-sized targets at up to 30 meters in its stride. The gas reservoir is removable but unlike the TM version, it can be refilled without removing it from the shotgun by pulling off the butt pad.

If you've seen how effective gas tri-shot shotguns are in-game but need something less old-fashioned than the legendary M870, the KSG is about as modern as it gets! With HALO-esque vibes, a short overall length, a superb quality build and an oh-so-satisfying pump action mechanism, the EMG KelTec KSG Bullpup Gas Shotgun is an impressive platform in all aspects!

If you're in the market for a menacing pump-action shotgun but need something at the cutting edge, the KelTec KSG Bullpup Gas Shotgun from EMG will suit your needs perfectly! Based on the real steel KelTec KSG, a mould-breaking bullpup shotgun design with dual magazine tubes, the EMG version is full metal and powered by green gas, offering the choice of 3 or 6 BBs per shot for a realistic shotgun-style spread!

Thanks to official licencing from KelTec, the EMG KSG is littered with authentic KelTec trademarks matching the real thing perfectly and includes the iconic KelTec squared texture on the pump grip and pistol grip. Inside, we have Tokyo Marui-based internals with a fixed HOP-up optimised for 0.25g BBs, capable of hitting man-sized targets at up to 30 meters in its stride. The gas reservoir is removable but unlike the TM version, it can be refilled without removing it from the shotgun by pulling off the butt pad.

If you've seen how effective gas tri-shot shotguns are in-game but need something less old-fashioned than the legendary M870, the KSG is about as modern as it gets! With HALO-esque vibes, a short overall length, a superb quality build and an oh-so-satisfying pump action mechanism, the EMG KelTec KSG Bullpup Gas Shotgun is an impressive platform in all aspects!

If you're a CQB skirmisher and are looking for a new compact AR platform with a ton of nifty features all for a relatively low price, then the DA-B18-EGL BRAVO™ has you covered! This PDW-style AEG comes with a CNC aluminium handguard and a high-density polymer receiver. And of course, the star of the show, the EAGLE™ MOSFET! This ETU allows you to program your preferred firing such as burst modes, binary trigger and an AUG mode.

This AR is equipped with an M-LOK handguard, sound-amplifying muzzle device and modernised receiver on the outside and kitted out on the inside with a rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate, a 6.03mm tightbore inner barrel and the EAGLE™ programmable MOSFET.

The compact nature of this AEG means that the PDW stock and buffer tube can only accommodate smaller batteries. We at Patrol Base recommend the Specna Arms 7.4V 600mAh 20/40C Battery for PDW as it is specifically designed for PDW-style assault rifles. If you want an advanced compact platform that is perfect for running around in a CQB skirmish, then the DA-B18-EGL BRAVO™ TALOS 3 PDW M4/AR-15 AEG is the one to choose!

Locked to semi-automatic, this 6mm Airsoft Gas Blowback rifle is a lightweight and highly manoeuvrable platform, designed for use as a scout type weapon. The weapon features dual alloy and polymer construction, with alloy internals, outer barrel and buffer tube, and the grip, Stock and body made from polymer.

VORSK bring us another unique and cutting-edge entry in their line-up of ever popular pistols. Being a hybridised version of the iconic 1911 design, this pistol breaks the mould by taking Hi-Capa magazines, bringing this sidearm to new heights. The VX-14 features a tonne of ultra- modern design choices such as grippy V-textured side panels, cut slide grooves for ease of racking and a 20mm RIS pistol rail for aftermarket tactical devices to bring your competitive pistol shooting to a new level.

But the real trick the VX-14 has up its sleeve is the inclusion of a suppressor, as well as an inner barrel extension. The suppressor can be installed with or without the barrel extension, giving you a choice of FPS, depending on the conditions at hand.