Hot Airsoft Products

If you run a platform with QD sling sockets and want the ability to quickly switch between a single-point and two-point sling setup, the HASTA Adaptive Mission Sling Gen.4 will do the trick! Made using strong Nylon webbing, steel QD sling swivels and a mixture of alloy and polymer fittings, the Adaptive Mission Sling Gen.4 mounts to QD sling sockets found on many modern Airsoft platforms, allowing it to be disconnected quickly if you need to ditch your primary double time.

To run it as a single-point sling, simply connect the QD sling swivel to the socket on the alloy D-ring style loop on one end and mount the QD swivel to your platform's QD sling socket. To use the Adaptive Mission Sling in a two-point config, simply disconnect the QD swivel from the D-ring socket and affix it to the second QD socket on your platform. One of the best things about this sling is how quickly it can be switched between configurations, allowing for mid-game adjustment in seconds, ideal for skirmish sites with a mix of indoor and outdoor environments.

The Adaptive Mission Sling is also fully adjustable in terms of length, with a maximum length of 138cm approximately, allowing for most body types and loadouts. Length adjustment is even faster than changing configuration; simply pull on the toggle loop to give yourself extra breathing room or tighten your sling up for more secure carry.

If you run a platform with QD sling sockets and want the ability to quickly switch between a single-point and two-point sling setup, the HASTA Adaptive Mission Sling Gen.4 will do the trick! Made using strong Nylon webbing, steel QD sling swivels and a mixture of alloy and polymer fittings, the Adaptive Mission Sling Gen.4 mounts to QD sling sockets found on many modern Airsoft platforms, allowing it to be disconnected quickly if you need to ditch your primary double time.

To run it as a single-point sling, simply connect the QD sling swivel to the socket on the alloy D-ring style loop on one end and mount the QD swivel to your platform's QD sling socket. To use the Adaptive Mission Sling in a two-point config, simply disconnect the QD swivel from the D-ring socket and affix it to the second QD socket on your platform. One of the best things about this sling is how quickly it can be switched between configurations, allowing for mid-game adjustment in seconds, ideal for skirmish sites with a mix of indoor and outdoor environments.

The Adaptive Mission Sling is also fully adjustable in terms of length, with a maximum length of 138cm approximately, allowing for most body types and loadouts. Length adjustment is even faster than changing configuration; simply pull on the toggle loop to give yourself extra breathing room or tighten your sling up for more secure carry.

If you run a platform with QD sling sockets and want the ability to quickly switch between a single-point and two-point sling setup, the HASTA Adaptive Mission Sling Gen.4 will do the trick! Made using strong Nylon webbing, steel QD sling swivels and a mixture of alloy and polymer fittings, the Adaptive Mission Sling Gen.4 mounts to QD sling sockets found on many modern Airsoft platforms, allowing it to be disconnected quickly if you need to ditch your primary double time.

To run it as a single-point sling, simply connect the QD sling swivel to the socket on the alloy D-ring style loop on one end and mount the QD swivel to your platform's QD sling socket. To use the Adaptive Mission Sling in a two-point config, simply disconnect the QD swivel from the D-ring socket and affix it to the second QD socket on your platform. One of the best things about this sling is how quickly it can be switched between configurations, allowing for mid-game adjustment in seconds, ideal for skirmish sites with a mix of indoor and outdoor environments.

The Adaptive Mission Sling is also fully adjustable in terms of length, with a maximum length of 138cm approximately, allowing for most body types and loadouts. Length adjustment is even faster than changing configuration; simply pull on the toggle loop to give yourself extra breathing room or tighten your sling up for more secure carry.

The Heckler & Koch MP7A1 - Anyone and everyone who's taken a remote interest in firearms at some point will have stumbled across this exceptional piece of authentic weaponry, famous for its compact and effective design the MP7A1 is an inimitable platform and now YOU, yes you can get your hands on one of H&K's finest productions.

If you've got your ear to the ground on the latest Airsoft releases, you can't have missed the LevAR 15" from G&G! This innovative platform is powered by green gas, making use of G&G M4/AR-15 AEG upper receivers providing almost unlimited customisation options and the chance to make this lever action "Space Cowboy" rifle truly yours.

The LevAR 15" is confirmed to be compatible with G&G M4 AEG upper receivers, allowing you to configure it how you want, from a long sniper rifle-style setup to a compact and agile scout rifle perfect for mobile marksmen. Powered by green gas using an internal gas reservoir, the LevAR 15" also boasts a 1913/20mm Picatinny stock interface, meaning the stock can be swapped or removed entirely. We can confirm that the 1913 interface is set at an angle, so aftermarket 1913 stocks will fit but look funky.

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day.

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

The MTEK Flux Helmet is a replica of a real-world product which serves to become the be-all and end-all of Helmet Systems, offering true modularity in a lightweight and highly developed Airsoft Helmet which has every base covered.

The MTEK Flux Helmet is a replica of a real-world product which serves to become the be-all and end-all of Helmet Systems, offering true modularity in a lightweight and highly developed Airsoft Helmet which has every base covered.

The MTEK Flux Helmet is a replica of a real-world product which serves to become the be-all and end-all of Helmet Systems, offering true modularity in a lightweight and highly developed Airsoft Helmet which has every base covered.

If you've been browsing modern SMG designs and prefer pre-upgraded platforms, check out the Delta Armory Grand Power STRIBOG™ SP10A3 AEG! A cutting-edge 10mm Auto-style subgun with a uniquely modern aesthetic, equipped with a 1913/20mm Picatinny stock interface, M-LOK slots and ambidextrous fire controls, the STRIBOG™ has been a big hit in real steel form, and it's easy to see why!

This is the "Upgraded" version, available in full metal ALPHA™ build standard with a CNC aluminium monolithic upper receiver or with CHARLIE™ externals with a fibre-reinforced polymer upper. The ALPHA™ build is the one to go for if realism is your top priority, with the CHARLIE™ version being well-suited to fast-moving skirmishers seeking a modern SMG which will never slow them down.

Inside the upgraded version, we are treated to the same internal specs as the incredible FREYA™ Gen.2 AEG, one of 2025's most popular Airsoft platforms. The TM-spec version 2 gearbox is rocking the usual SHS upgraded internals present in all Delta AEGs, along with a CNC aluminium nozzle, piston head and cylinder head, a CNC Steel cylinder and spring guide, and CNC steel 16:1 high-speed gears running on 8mm bushings. A high-torque neodymium magnet motor provides the speed and torque necessary for a killer rate of fire and stunning trigger response, especially with pre-cocking cranked up via the on-board EAGLE™ ETU!

The inner barrel is a 6.03mm tightbore example, and the HOP-up unit is an M4/AR-15 style rotary, giving you access to some of the best upgrade parts out there. Also inside is the EAGLE™ ETU/MOSFET, offering more programmable options than ever before, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking.

Being licensed by Grand Power Firearms and designed based on technical drawings of the real firearm, the STRIBOG™ will be as close to 1:1 as an AEG can get on the outside, backed up by Delta's proven FREYA™ Gen.2 internals. Whether you’re after a realistic, high-performance CQB primary or you’re a customisation addict seeking a blank canvas to make truly yours, the Delta Armory Grand Power STRIBOG™ SP10A3 AEG upgraded version should be your next primary!

If you've been browsing modern SMG designs and prefer pre-upgraded platforms, check out the Delta Armory Grand Power STRIBOG™ SP10A3 AEG! A cutting-edge 10mm Auto-style subgun with a uniquely modern aesthetic, equipped with a 1913/20mm Picatinny stock interface, M-LOK slots and ambidextrous fire controls, the STRIBOG™ has been a big hit in real steel form, and it's easy to see why!

This is the "Upgraded" version, available in full metal ALPHA™ build standard with a CNC aluminium monolithic upper receiver or with CHARLIE™ externals with a fibre-reinforced polymer upper. The ALPHA™ build is the one to go for if realism is your top priority, with the CHARLIE™ version being well-suited to fast-moving skirmishers seeking a modern SMG which will never slow them down.

Inside the upgraded version, we are treated to the same internal specs as the incredible FREYA™ Gen.2 AEG, one of 2025's most popular Airsoft platforms. The TM-spec version 2 gearbox is rocking the usual SHS upgraded internals present in all Delta AEGs, along with a CNC aluminium nozzle, piston head and cylinder head, a CNC Steel cylinder and spring guide, and CNC steel 16:1 high-speed gears running on 8mm bushings. A high-torque neodymium magnet motor provides the speed and torque necessary for a killer rate of fire and stunning trigger response, especially with pre-cocking cranked up via the on-board EAGLE™ ETU!

The inner barrel is a 6.03mm tightbore example, and the HOP-up unit is an M4/AR-15 style rotary, giving you access to some of the best upgrade parts out there. Also inside is the EAGLE™ ETU/MOSFET, offering more programmable options than ever before, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking.

Being licensed by Grand Power Firearms and designed based on technical drawings of the real firearm, the STRIBOG™ will be as close to 1:1 as an AEG can get on the outside, backed up by Delta's proven FREYA™ Gen.2 internals. Whether you’re after a realistic, high-performance CQB primary or you’re a customisation addict seeking a blank canvas to make truly yours, the Delta Armory Grand Power STRIBOG™ SP10A3 AEG upgraded version should be your next primary!

If you've been browsing modern SMG designs and prefer pre-upgraded platforms, check out the Delta Armory Grand Power STRIBOG™ SP10A3 AEG! A cutting-edge 10mm Auto-style subgun with a uniquely modern aesthetic, equipped with a 1913/20mm Picatinny stock interface, M-LOK slots and ambidextrous fire controls, the STRIBOG™ has been a big hit in real steel form, and it's easy to see why!

This is the "Upgraded" version, available in full metal ALPHA™ build standard with a CNC aluminium monolithic upper receiver or with CHARLIE™ externals with a fibre-reinforced polymer upper. The ALPHA™ build is the one to go for if realism is your top priority, with the CHARLIE™ version being well-suited to fast-moving skirmishers seeking a modern SMG which will never slow them down.

Inside the upgraded version, we are treated to the same internal specs as the incredible FREYA™ Gen.2 AEG, one of 2025's most popular Airsoft platforms. The TM-spec version 2 gearbox is rocking the usual SHS upgraded internals present in all Delta AEGs, along with a CNC aluminium nozzle, piston head and cylinder head, a CNC Steel cylinder and spring guide, and CNC steel 16:1 high-speed gears running on 8mm bushings. A high-torque neodymium magnet motor provides the speed and torque necessary for a killer rate of fire and stunning trigger response, especially with pre-cocking cranked up via the on-board EAGLE™ ETU!

The inner barrel is a 6.03mm tightbore example, and the HOP-up unit is an M4/AR-15 style rotary, giving you access to some of the best upgrade parts out there. Also inside is the EAGLE™ ETU/MOSFET, offering more programmable options than ever before, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking.

Being licensed by Grand Power Firearms and designed based on technical drawings of the real firearm, the STRIBOG™ will be as close to 1:1 as an AEG can get on the outside, backed up by Delta's proven FREYA™ Gen.2 internals. Whether you’re after a realistic, high-performance CQB primary or you’re a customisation addict seeking a blank canvas to make truly yours, the Delta Armory Grand Power STRIBOG™ SP10A3 AEG upgraded version should be your next primary!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ II ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus  purple hop rubber was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ II ETU. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

The sneaky counterpart to the Bolster Tuned CM.041 upgraded SMG-5 AEGs has returned and it's better than ever! Enter the CM.041 SD5 SMG-5 Upgraded Edition; a full metal SMG-5 SD5 replica built by the same team behind the ultra-high-end Bolster Armouries AEG series and previous Bolster Tuned AEGs.

As with its less discrete brethren, the first thing the Bolster Armouries team do with the CM.041 SD is to tear it to pieces and build it back up to fulfil its true potential. This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, and a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware.

The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Bucking was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the Bolster Tuned CM.041 SD5 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 SD to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041 SD! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

The latest from the Airsoft Gods at Tokyo Marui, the AK White Storm is a reinvention of the original TM AKM NGRS rifle from many years ago. The White Storm takes the classic AK design and outfits it for a more modern era, complete with a 6 position retractable stock, both M-LOK and 20mm Picatinny rail mounting interfaces and an ergonomic pistol grip which will leave you not wanting to put this rifle down! 

The most notable addition to this new AK NGRS is its "stop firing on empty" feature, which will never leave you guessing as to when your magazine has run dry. If this happens, the AK White storm does what a real AK does, absolutely nothing - meaning you must quickly insert a loaded magazine and allow the White Storm to continue to unleash a white storm of BBs upon the enemy team!

The latest from the Airsoft Gods at Tokyo Marui, the AK White Storm is a reinvention of the original TM AKM NGRS rifle from many years ago. The White Storm takes the classic AK design and outfits it for a more modern era, complete with a 6 position retractable stock, both M-LOK and 20mm Picatinny rail mounting interfaces and an ergonomic pistol grip which will leave you not wanting to put this rifle down! 

The most notable addition to this new AK NGRS is its "stop firing on empty" feature, which will never leave you guessing as to when your magazine has run dry. If this happens, the AK White storm does what a real AK does, absolutely nothing - meaning you must quickly insert a loaded magazine and allow the White Storm to continue to unleash a white storm of BBs upon the enemy team!

If you're after an authentic AK with incredible performance, look no further than the Specna Arms SA-PJ04 PRIME™ AKS-74 AEG! A flawlessly accurate replica of the real steel AKS-74, the folding stock model of the Cold War-era AK-74, this full metal beast boasts real wood handguards and a steel outer barrel, receiver and top cover, giving it realistic weight distribution and providing an authentic skirmishing experience without equal!

Like Specna's PRIME™ AR line, this beast is equipped with a powerful Dark Matter™ brushless motor, CNC 16:1 ratio high-speed steel gears running on 8mm J-CAGE bushings, CNC aluminium compression parts and a reinforced tappet plate for reliable feeding. The Gate ASTER™ SE MOSFET is the icing on the cake, offering a wide range of programmable fire modes, adjustable trigger sensitivity, pre-cocking, active braking and Gate Control Station App connectivity via the Gate Blu-link (available separately). This combination results in an incredible rate of fire and super-speedy trigger response, beating out almost every other AK AEG on the market. 

With beastly internals far exceeding other stock AEGs and a rock-solid full metal build, the Specna Arms SA-PJ04 PRIME™ AKS-74 AEG is hard to beat! If you value a hefty, realistic replica with internals to rival the best, you're in good hands with the SA-PJ04!

If you're in search of a slick, modern AK to complete your PMC loadout, the Specna Arms SA-PJ06 PRIME™ AK-74 Tactical AEG is one to watch. This full metal AK AEG boasts a large proportion of steel in its build and is rocking an M-LOK/20mm Picatinny hybrid handguard, 20mm railed gas block and M4/AR-15 buffer tube, sidestepping the usual utilitarian AK ergonomics for vast handling and modularity improvements. 

Like Specna's PRIME AR line, this beast is equipped with a powerful Dark Matter™ brushless motor, CNC 16:1 ratio high-speed steel gears running on 8mm J-CAGE bushings, CNC aluminium compression parts and a reinforced tappet plate for reliable feeding. The Gate ASTER™ SE MOSFET is the icing on the cake, offering a wide range of programmable fire modes, adjustable trigger sensitivity, pre-cocking, active braking and Gate Control Station App connectivity via the Gate Blu-link (available separately). This combination results in an incredible rate of fire and super-speedy trigger response, beating out almost every other AK AEG on the market. 

If you're after an AK but can't get on with the retro ergonomics, the SA-PJ06 should be on your radar. Whether you're planning a tactical AK build or you fancy a change from M4s, the Specna Arms SA-PJ06 PRIME™ AK-74 Tactical AEG will save you a lot of work!

The sneaky snipers' best friend is now even better in cold weather! The STTI ST-23 NBB Gas Pistol; CO2 version, is exactly what you need if you plan to take part in any sneaky outdoor gameplay. This pistol is well-known and well-loved in the Airsoft community for its affordability, often leaving users surprised with just how good its performance is.

Its full polymer construction keeps the weight low but also feels great in the hand, with plenty of texturing so you can be sure that you have good handling on this pistol whenever you use it. This sidearm also comes with a "power up" suppressor, which means it has an inner barrel within it. When it's installed, it doubles the length of the inner barrel for more range and power.

Airsoft MOSCART grenade launchers just got cooler! The EMG HAVOC "KAOS" Standalone 40mm Grenade Launcher Pack is a bundle of individual products that can be built up into the ultimate MOSCART launcher backup. If you need to shower an opponent in BBs, this Airsoft grenade launcher is the perfect skirmish surprise/scare for any unsuspecting foe.

The launcher is constructed from polymer with a CNC aluminium frame. This makes it a lightweight but very durable MOSCART launcher, perfect for remaining agile on the battlefield but tough enough to withstand bumps and scrapes. You will need to purchase Airsoft MOSCART Shells for this platform.

This product includes a Polymer EMG 40mm MOSCART 12" "HAVOC" Grenade Launcher, EMG KAOS Standalone Conversion Kit, ASG STRIKE SYSTEMS Red Dot, CYMA Adjustable Whale Stock and PTS Syndicate EPG-C GBBR Grip.

This classic Trucker style hat belongs on your head! The Vortex Barneveld 608 Cap is blue, giving it that classic American trucker style. It also makes a great sun hat for any outdoor activity, including hiking and climbing. Represent your favourite premium optics brand with style anywhere you go! It also has an adjustable strap so you can fit it perfectly on your head.

It is made from 60% Cotton and 40% Polyester and has mesh panels on the sides and back, which keep your head cool whilst you're wearing this stylish cap. If your hat gets dirty, it is recommended that you hand-wash and air-dry only.

This classic Trucker style hat belongs on your head! The Vortex Red Alert Cap is olive, a slightly more tactical take on the classic trucker hat style. It makes a great sun hat for any outdoor activity, including hiking and climbing. Also present is an adjustable strap so you can fit the hat perfectly on your head.Represent your favourite premium optics brand with style anywhere you go!

It is made from 60% Cotton and 40% Polyester and has mesh panels on the sides and back, which keep your head cool whilst you're wearing this stylish cap. If your hat gets dirty, it is recommended that you hand-wash and air-dry only.

If your collection lacks an AK but you demand cutting-edge ergonomics, the Specna Arms SA-PJ07 PRIME™ AK-74 Tactical EXT AEG is well suited to your needs! This full metal AK AEG boasts a large proportion of steel in its build and is rocking an M-LOK/20mm Picatinny hybrid handguard, 20mm railed gas block and M4/AR-15 buffer tube, sidestepping the usual utilitarian AK ergonomics for vast handling and modularity improvements.

Like Specna's PRIME AR line, this beast is equipped with a powerful Dark Matter™ brushless motor, CNC 16:1 ratio high-speed steel gears running on 8mm J-CAGE bushings, CNC aluminium compression parts and a reinforced tappet plate for reliable feeding. The Gate ASTER™ SE MOSFET is the icing on the cake, offering a wide range of programmable fire modes, adjustable trigger sensitivity, pre-cocking, active braking and Gate Control Station App connectivity via the Gate Blu-link (available separately). This combination results in an incredible rate of fire and super-speedy trigger response, beating out almost every other AK AEG on the market.

Whether you're working on a PMC loadout or want to mimic real steel tactical AK builds used by US civilian shooters, the Specna Arms SA-PJ07 PRIME™ AK-74 Tactical EXT AEG makes a fantastic primary. Bristling with modern furniture and packing serious heat internally, the SA-PJ07 both looks the part and shoots flawlessly!

Need a longer rifle for outdoor skirmishes? The G&G Armament TR16 GMS MK.II GT Advanced G2 M4/AR-15 AEG is an excellent choice for the price. With its sleek design, full metal construction and M-LOK handguard, this rifle feels just like the real thing.

This rifle comes with an upgraded and reinforced gearbox, as well as the well-known, high-performance GATE ASTER SE ETU. It provides many functions such as programmable fire modes, pre-cocking, ROF control, and active braking. This really takes the AEG's abilities to the next level!

If you need a high-performance rifle which looks just as good as it shoots, the G&G Armament TR16 GMS MK.II GT Advanced G2 M4/AR-15 AEG is the optimal choice for any skirmisher.

Need a longer rifle for outdoor skirmishes? The G&G Armament TR16 GMS MK.II GT Advanced G2 M4/AR-15 AEG is an excellent choice for the price. With its sleek design, full metal construction and M-LOK handguard, this rifle feels just like the real thing.

This rifle comes with an upgraded and reinforced gearbox, as well as the well-known, high-performance GATE ASTER SE ETU. It provides many functions such as programmable fire modes, pre-cocking, ROF control, and active braking. This really takes the AEG's abilities to the next level!

If you need a high-performance rifle which looks just as good as it shoots, the G&G Armament TR16 GMS MK.II GT Advanced G2 M4/AR-15 AEG is the optimal choice for any skirmisher.

If you are sick and tired of your goggles fogging at a critical moment, here is the solution! The ExFog XT Antifog System is a revolutionary anti-fog device designed to attach to helmets in its basic form but can also be worn as a headband setup with the "Standard" set. The Exfog Cold Air Unit will provide constant cold air to your lenses to stop fogging of your goggles or helmet via food-grade PVC tubes and has adjustable fan speed so you can adjust the anti-fog effect to suit the situation.

This is the newest generation of ExFog Cold Air Unit, known as the "XT". The new unit is more powerful than before with the same low noise performance, and now charges via USB-Type C. The XT version also includes the ExFog Universal Magnetic Goggle Adapters so you can easily remove your goggles from the unit in seconds, with no need for tools.

Power is provided by an internal rechargeable battery and the device mounts via velcro in the "Essentials" package or via a choice of velcro or the Tband or Headband kit if you choose the "Standard" set. If you want goggle fogging to be a thing of the past, the Exfog is one of the few devices which guarantee this!

If you are the type of player who uses a full loadout of midcaps, and you want to reload and get ready for the next game in just a few seconds, we have a treat for you! Introducing the M12 Sidewinder Speed Loader from PTS Syndicate, an ultra quick crank wound speed loader which can load a midcap in an astonishing 4 seconds of winding! This speed loader has a whopping 1600 round capacity, and is widely known for its reliability.

Calling all one man armies! Are you looking for a bag that can hold all of your gear? Look no further than the Double Rifle Gun Case 96cm from 8Fields Tactical. Able to hold 2 airsoft rifles and a wealth of accessories, this is the affordable rifle bag that can do it all!

The outer compartment is slightly shorter than the main, measuring 78cm approximately; ideal for compact SMGs and mid-length rifles with side-folding stocks. The main compartment is full length with a short fold-out extension, ideal for Airsoft guns of up to 95cm in length. Carry-wise, you have the option of using the dual carry handles or the dual backpack straps on the rear, giving you options for both hands-free and one-handed carry. On the rear, we are treated to a clear I.D panel/window, ideal for an I.D card or labelling your gun bags so you don't get them mixed up.

If you're after an affordable, secure and easy way to transport your pride and joy to and from a gameday, the 8Fields Tactical Double Rifle Gun Case 96cm is the right tool for the job!