Delta Armory Airsoft

If you're looking for lower face protection with more flexibility than full-mesh designs, the Delta Armory Mesh Lower Face Mask Gen.2 is ideal. This mesh lower face mask has fabric sides, intended to provide a great balance between protective qualities and comfort, allowing you to get a cheek weld on the stock of your primary without any awkward neck movements. The harness of the Mesh Lower Face Mask Gen.2 is fully adjustable, making it suitable for practically any head size. 

Available in a vast range of camo and solid colour options to suit any loadout, the Mesh Lower Face Mask Gen.2 works with helmets and communications headsets seamlessly, though will require a bit of fiddling for optimal comfort. If you're looking for a more flexible alternative to your usual lower face protection, the Delta Armory Mesh Lower Face Mask Gen.2 is what you need!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind.

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type.

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind.

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type.

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind.

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type.

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind.

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type.

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful!

If you're looking for 0.28g BIO BBs for woodland warfare, Delta Armory 0.28g Diamond 6mm BIO BBs are a fine choice. These BBs are supplied in a 1KG resealable bag of approximately 3571 BBs and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

Being made from biodegradable materials means these BBs are suitable for outdoor skirmishing at any site in the country and great for target shooting in the back garden. 0.28G BBs offer a few benefits compared to lighter weights, including extending range with the correct HOP-up setting, improving wind resistance and increasing foliage penetration potential. If you've got an outdoor skirmish booked, Delta Armory 0.28g Diamond 6mm BIO BBs are the right ammo for the job!

If you want to avoid the pain of crawling on thorns or taking those stinging knuckle shots, these Combat Gloves from Delta Armory will do the trick! The gloves are available in a range of different colour options suitable for any loadout or environment, with olive drab, black, green or tan up for grabs.

Delta's gloves are characterized by good protection of the parts of the hand where impact is most frequent - palm, finger joints and knuckles. With foam pad on the thumb, index, middle and ring fingers, you can crawl all day in comfort in these affordable tactical gloves and never feel nettles or thorns!

If you want to avoid the pain of crawling on thorns or taking those stinging knuckle shots, these Combat Gloves from Delta Armory will do the trick! The gloves are available in a range of different colour options suitable for any loadout or environment, with olive drab, black, green or tan up for grabs.

Delta's gloves are characterized by good protection of the parts of the hand where impact is most frequent - palm, finger joints and knuckles. With foam pad on the thumb, index, middle and ring fingers, you can crawl all day in comfort in these affordable tactical gloves and never feel nettles or thorns!

If you want to avoid the pain of crawling on thorns or taking those stinging knuckle shots, these Combat Gloves from Delta Armory will do the trick! The gloves are available in a range of different colour options suitable for any loadout or environment, with olive drab, black, green or tan up for grabs.

Delta's gloves are characterized by good protection of the parts of the hand where impact is most frequent - palm, finger joints and knuckles. With foam pad on the thumb, index, middle and ring fingers, you can crawl all day in comfort in these affordable tactical gloves and never feel nettles or thorns!

If you want to avoid the pain of crawling on thorns or taking those stinging knuckle shots, these Combat Gloves from Delta Armory will do the trick! The gloves are available in a range of different colour options suitable for any loadout or environment, with olive drab, black, green or tan up for grabs.

Delta's gloves are characterized by good protection of the parts of the hand where impact is most frequent - palm, finger joints and knuckles. With foam pad on the thumb, index, middle and ring fingers, you can crawl all day in comfort in these affordable tactical gloves and never feel nettles or thorns!

If your M4/AR-15 AEG is a bit scratched up, the Delta Armory Receiver Set for M4/AR-15 AEG will sort that out! This set includes the upper and lower receiver, fire selector switch and front receiver pin, available in high density polymer or alloy construction. If you're working on a lightweight build, the polymer version is ideal. If you want weight and realism, you want the metal version!

Styling-wise, this receiver set is Delta's own design, inspired by real steel "Billet" receivers found on high-end, ultra-modern real steel AR builds. The trigger guard is enlarged and built-in, improving strength when compared to milspec receiver designs, in line with the latest real steel ARs hitting the market. As we might expect, we are treated to a 20mm Picatinny receiver rail running along the top, ready for a red dot sight, scope or iron sights. 

If you're building from scratch, you will need a charging handle, magazine release, dust cover and mock rear pin to complete the receiver itself, along with your internals and pistol grip. While we can make no guarantees, parts from most other brands should fit this receiver without issues. Whether you need a bargain receiver for a scratch build or want to change the build style of an existing M4/AR-15 AEG, the Delta Armory Receiver Set for M4/AR-15 AEG will do the trick!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed.

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed.

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".

The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!

If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".

The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!

If you're looking for affordable tactical gloves, Delta Armory has what you need! Constructed from a mixture of Spandex, Neoprene and synthetic leather, the Tactical Ops Airsoft Gloves boast reinforced palms and knuckles, making them great for crawling in the woods and avoiding the sting of knuckle hits in CQB. Each glove includes a carrier loop so you can attach them to your belt or rig with a carabiner and the wrist is adjustable via velcro, meaning a snug fit for all.

One of the best features of the Tactical Ops Airsoft Gloves is their touchscreen compatibility, allowing you to use your smartphone or other touchscreen device without removing them. Sizing information can be found in the "Full Description" under "Special Instructions", so make sure you measure up for the perfect fit!

If you're looking for affordable tactical gloves, Delta Armory has what you need! Constructed from a mixture of Spandex, Neoprene and synthetic leather, the Tactical Ops Airsoft Gloves boast reinforced palms and knuckles, making them great for crawling in the woods and avoiding the sting of knuckle hits in CQB. Each glove includes a carrier loop so you can attach them to your belt or rig with a carabiner and the wrist is adjustable via velcro, meaning a snug fit for all.

One of the best features of the Tactical Ops Airsoft Gloves is their touchscreen compatibility, allowing you to use your smartphone or other touchscreen device without removing them. Sizing information can be found in the "Full Description" under "Special Instructions", so make sure you measure up for the perfect fit!

If you're looking for affordable tactical gloves, Delta Armory has what you need! Constructed from a mixture of Spandex, Neoprene and synthetic leather, the Tactical Ops Airsoft Gloves boast reinforced palms and knuckles, making them great for crawling in the woods and avoiding the sting of knuckle hits in CQB. Each glove includes a carrier loop so you can attach them to your belt or rig with a carabiner and the wrist is adjustable via velcro, meaning a snug fit for all.

One of the best features of the Tactical Ops Airsoft Gloves is their touchscreen compatibility, allowing you to use your smartphone or other touchscreen device without removing them. Sizing information can be found in the "Full Description" under "Special Instructions", so make sure you measure up for the perfect fit!

If a DMR is on the cards, the Delta Armory DA-A20-EGL ALPHA™ TEMPEST 2 M4/AR-15 AEG is a fantastic choice on which to base your build! Boasting full metal construction and plenty of pre-upgraded internal parts, this M4/AR-15 AEG platform is rocking a lengthy 16-inch outer barrel, giving it the appropriate looks to suit a DMR build.

To make matters all the sweeter, the inner barrel is a 6.03mm tightbore measuring 420mm in length and the pre-installed EAGLE MOSFET allows you to program the trigger for semi-automatic only. Coupled with its quick-change spring system, the TEMPEST 2 is probably one of the easiest DMR conversions out there! Amongst the EAGLE's other tricks, we have the option to use burst modes of various durations, binary trigger, sniper delay, AUG mode, pre-cocking, trigger sensitivity and active braking.

For any long-range oriented build, the DA-A20-EGL ALPHA™ TEMPEST 2 M4/AR-15 AEG would make a fantastic starting point but is already very well equipped to compete as it comes. If you're seeking a longer platform for outdoors work and want some advanced features thrown in for a remarkable price, the TEMPEST 2 is your best bet!

If a DMR is on the cards, the Delta Armory DA-A20-EGL ALPHA™ TEMPEST 2 M4/AR-15 AEG is a fantastic choice on which to base your build! Boasting full metal construction and plenty of pre-upgraded internal parts, this M4/AR-15 AEG platform is rocking a lengthy 16-inch outer barrel, giving it the appropriate looks to suit a DMR build.

To make matters all the sweeter, the inner barrel is a 6.03mm tightbore measuring 420mm in length and the pre-installed EAGLE MOSFET allows you to program the trigger for semi-automatic only. Coupled with its quick-change spring system, the TEMPEST 2 is probably one of the easiest DMR conversions out there! Amongst the EAGLE's other tricks, we have the option to use burst modes of various durations, binary trigger, sniper delay, AUG mode, pre-cocking, trigger sensitivity and active braking.

For any long-range oriented build, the DA-A20-EGL ALPHA™ TEMPEST 2 M4/AR-15 AEG would make a fantastic starting point but is already very well equipped to compete as it comes. If you're seeking a longer platform for outdoors work and want some advanced features thrown in for a remarkable price, the TEMPEST 2 is your best bet!

If you're looking for a MOLLE belt to expand your carrying capacity, the Delta Armory MOLLE Battle Belt is a fine choice. Made from a combination of 1000D Cordura and Nylon, this belt is adjustable to fit waist sizes from 34 inches to 44 inches, equipped with MOLLE attachment loops for pouches, holsters and other MOLLE compatible kit. The belt also features a pair of alloy glove retaining hooks which can also be used for keys or chem-lights. 

The MOLLE Battle Belt is padded for extra comfort and backed with breathable mesh, allowing airflow so you don't get too sweaty. The padding allows this belt to be fully laden with gear without becoming uncomfortable and you can also pair the MOLLE Battle Belt with a harness for further improved stability. If you're looking for a starting point for your MOLLE belt build, the Delta Armory MOLLE Battle Belt will do the trick!

If you're looking for a MOLLE belt to expand your carrying capacity, the Delta Armory MOLLE Battle Belt is a fine choice. Made from a combination of 1000D Cordura and Nylon, this belt is adjustable to fit waist sizes from 34 inches to 44 inches, equipped with MOLLE attachment loops for pouches, holsters and other MOLLE compatible kit. The belt also features a pair of alloy glove retaining hooks which can also be used for keys or chem-lights. 

The MOLLE Battle Belt is padded for extra comfort and backed with breathable mesh, allowing airflow so you don't get too sweaty. The padding allows this belt to be fully laden with gear without becoming uncomfortable and you can also pair the MOLLE Battle Belt with a harness for further improved stability. If you're looking for a starting point for your MOLLE belt build, the Delta Armory MOLLE Battle Belt will do the trick!

If you need some hefty BBs for your upgraded setup, Delta Armory's 0.30g Diamond 6mm BIO BB are the perfect choice for outdoor skirmishing. These BBs are supplied in a 1KG resealable bag of 3333 BBs approximately and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

Being made from biodegradable materials means these BBs are suitable for outdoor skirmishing at any site in the country and great for target shooting in the back garden. These slightly heavier than standard BBs provide improved foliage penetration ability and wind resistance along with extended range in guns with upgraded HOP-ups. If you're running a DMR or an accurised platform in the great outdoors, the Delta Armory 0.30g Diamond 6mm BIO BBs are what you need to feed it!

If you want to start your Airsoft adventure with a muffled bang, the Delta Armory DA-C05 CHARLIE™ Silent Ops 7 will do it. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a 7-inch quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the Silent Ops 7 serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long range effectiveness.

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C05 is the best AR in this style and price range we have seen!

If you want to start your Airsoft adventure with a muffled bang, the Delta Armory DA-C05 CHARLIE™ Silent Ops 7 will do it. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a 7-inch quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the Silent Ops 7 serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long range effectiveness.

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C05 is the best AR in this style and price range we have seen!

If you're in the market for an affordable M4/AR-15 AEG with programmable fire controls and a lightweight polymer build, the Delta Armory DA-C06 CHARLIE™ Silent Ops M4/AR-15 AEG is what you need. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the DA-C06 CHARLIE™ serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long-range effectiveness. 

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C06 is the best AR in this style and price range we have seen!

If you're seeking some reinforced tactical gloves because you hate getting hit in the knuckles, the Delta Armory Defender II Tactical Gloves are what you need. These Airsoft optimised combat gloves are made from a mix of Spandex, Neoprene and Synthetic Leather with rubber wrist retainers to keep the gloves secure and comfortable in equal measure.

A more aggressive take on Delta's original Combat Gloves, the Defender II gloves keep the highly functional rubber wrist retainers, carrier loops and touchscreen compatibility but add in super strong Swiss Schoeller® Keprotec® reinforced knuckle, providing unparalleled protection. Keprotec® is a Kevlar-like material formed over a cushioned Neoprene backer, taking the sting out of close range hand shots and allowing you to crawl over hard surfaces on your knuckles with ease.

If you're fed up with sore hands after skirmishing or you need your hands looking professional and wound-free for work, Delta Armory's Defender II Tactical Gloves were designed with you in mind!

If you need biodegradable BBs for your pistol or shotgun, the 0.20g Diamond 6mm BIO BB from Delta Armory is a fantastic choice. Supplied in a resealable bag of 5000, Delta's Diamond BBs are high-grade polished 6mm BBs with tight tolerances to ensure reliable feeding and maximum accuracy potential.

If you're working on a low-cost, low-weight build, the Delta Armory Polymer 20mm Picatinny RAS for M4/AR-15 Delta Rings is a fine choice. Priced at less than a Big Mac meal but packaged with a pair of rail covers, this handguard is constructed from high density polymer, tipping the scales at a mere 180g!

Like the real KAC RAS it is based on, the Delta Armory RAS boasts 20mm Picatinny rails at 3, 6, 9 and 12 o'clock and is a two-part design with a separate upper and lower handguard. This means that once installed you can remove the lower handguard without tools, either for a battery change or to mount an M203 launcher. The included rail covers are designed to protect your hands and keep your rails crisp and in-spec but can be removed by holding the metal tab at the end down and sliding them off. 

Compatibility-wise, this handguard is designed to be paired with a Delta Ring and Handguard Cap so can easily be installed on M4A1, CQBR, XM177 and other classic M4/AR-15 configurations with the same procedure as the original ribbed handguards.

If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking.

For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding.

If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!