- Full metal construction
- FALCON EFCS inside - Ready for burst & binary
- Officially licenced by Aeroknox LLC, TX
If you're all about your modern M4/AR-15 platforms, the Double Eagle M920A Aeroknox AX//15 AEG is certain to catch your eye. This full metal M4/AR-15 platform sidesteps convention with a unique receiver, handguard, muzzle brake and pistol grip based on designs from Aeroknox LLC of Texas, with official licencing of course!
In line with other recent Double Eagle releases, the AX//15 boasts the impressive FALCON EFCS MOSFET pre-installed, giving the AEG an astonishing trigger response and rate of fire thanks to the improvements in electrical efficiency along with the ability to program the fire controls for burst modes, binary trigger and trigger sensitivity. These features are usually only found in AEGs twice this price! While it shoots like a dream, the AX//15 looks even better, with immaculately engraved Aeroknox trademarks across the design, flawlessly machined metal components and strong high density polymer furniture.
While high-end AR AEGs with interesting looks are a pound a penny these days, the AX//15's combination of slick ergonomics, gorgeous looks, phenomenal performance and great value for money make it a Patrol Base favourite. Make sure you get yours before we buy them all for ourselves!
Fast Delivery
Delivery & Postage
Here at Patrol Base we ship worldwide, delivering not only to the UK but to most of the EU and select Worldwide locations as well. We provide a working day-by-road service via our handpicked courier services, simply buy your Airsoft guns with us and we'll have them delivered directly to your door.
For more information and to see the country we deliver please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
Approx.
UK Next Day
£8.95
Approx.
Highlands / Islands
£24.99*
Approx.
Saturday
£14.95
Approx.
* Scottish Highlands, Islands, and EU post prices can vary wildly. Prices range from £8.99 to £29.99, so please ensure you refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be delighted with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
If your current AR platforms are looking a bit long in the teeth, you can join the space-age at the head of the pack with the Double Eagle M920A Aeroknox AX//15! This full metal M4/AR-15 platform is based on the real steel AX//15, a real steel AR made by high end manufacturer Aeroknox LLC of Texas; boasting a dynamic, modern look with M-LOK slots, 20mm rails and QD sling points galore.
On the inside, the M902A AX//15 has the same goodies that made the previous Double Eagle releases so phenomenal, including the FALCON EFCS MOSFET, a 6.04mm tightbore inner barrel with rotary HOP-up unit and a reinforced gearbox with choice upgrades to extend the lifespan of the AEG and allow it to take pure advantage of the FALCON's 11.1V LiPo compatibility. Whether the polymer build of previous Double Eagle M9x series AEGs put you off or you were waiting for one that simply cannot be built using aftermarket parts, the AX//15 ticks all the boxes!
Starting at the front we can find a flawlessly CNC machined replica of the Aeroknox Butterfly muzzle brake, complete with laser engraved markings on each side reading "BUTTERFLY" with "AEROKNOX" and the real steel part number just below. This muzzle brake blends perfectly with the cutting-edge design of the AX//15 overall, but while it may be a real shame to leave it in a box gathering dust, you can mount a tracer or suppressor instead thanks to the rifle's 14mm CCW male threaded outer barrel. Just remember to remove the grub screw on the bottom of the brake before unscrewing it!
The outer barrel is 11 inches in length, making the AX//15 ideal for both CQB and outdoor skirmishes while providing a modern look paired with the 10.5-inch handguard. Visible through the handguard ports, we are treated to a mock gas block and gas tube, a feature often missed out in Airsoft replicas but nonetheless an important part of a realistic AR replica. We love it when manufacturers go above and beyond and don't compromise in areas like this, thus our love for Double Eagle!
The handguard itself is based on the real steel Aeroknox AX//15 handguard and constructed from CNC machined aluminium, boasting M-LOK negative space attachment slots at the 3, 6, and 9 o'clock positions with an additional M-LOK slot and 20mm Picatinny rail at the front and rear up top. The M-LOK slots allow you to mount M-LOK accessories directly or use 20mm Picatinny rail adapters for M-LOK to add vertical or angled grips, tactical flashlights and PEQ/DBAL laser units should the mission require it.
The handguard's offset angles feature a mix of weight-reducing ports and grooves along with textured sections to provide extra grip for improved wet-weather handling. Included in the box is a pair of M-LOK rail covers based on the real steel Aeroknox RAIL//GRIPS which look awesome, fit the build perfectly and further enhance the AX//15's already superb handling. At the base of the handguard, we can find a QD sling socket on either side and more laser-engraved Aeroknox markings, with "AEROKNOX AX//15" on the right side and the Aeroknox logo on the left.
As we reach the receiver, we find a familiar sight, if we squint! The usual M4/AR-15 receiver has been thoroughly redesigned in the AX//15, with angular surfaces, weight reduction throughout and a weight-reduced upper 20mm Picatinny rail, meeting the handguard's 20mm rail seamlessly. The magazine well features stylish weight-reducing ports on the left side and a discrete Aeroknox logo in the corner on each side, showing off its brand pedigree while moving away from screaming "MY BRAND MADE THIS" and allowing the aesthetic of the AX//15 to speak for itself.
While the receiver has a unique design, the controls are all of the familiar and well-placed AR-15 variety, albeit with a few choice enhancements. The fire selector switch is extended considerably, making it very easy to operate with gloves but is quite firm, minimising the chances that it will be knocked out of position in the heat of battle. The selector has the usual 90-degree throw between modes. While the pre-installed FALCON EFCS allows the fire modes to be programmed to your requirements, the default fire modes are safe, semi-automatic and fully automatic, denoted with an X for safe, a O (circle) for semi and a ▢ (square) for full auto. If you are a PlayStation fan, this should make you smile!
The magazine release is located right where we would expect, on the right side of the magazine well, and is enlarged to make fast reloads easy when working under pressure while pumped full of adrenaline. The surface is textured to provide ample grip for wet weather operations and is also skeletonised to minimise added weight. The trigger guard is also enlarged and machined into the receiver, allowing for full-finger gloves to be used and improving the overall strength of the receiver when compared to the original AR receiver with its separate, modular trigger guard. Just like the mag release, the trigger guard is also weight-reduced with material removed from either side. These small weight reductions may not seem a big deal, but they add up and result in this full metal AR weighing a minuscule 2.3 kg!
The charging handle is the original M4/AR-15 low profile handle, matching well with the snag-free design of the AX//15 overall with its deleted mock forward assist and low profile brass deflector. Pulling the charging handle back will retract the mock bolt carrier and lock it to the rear, revealing the rotary HOP-up adjuster inside. The HOP-up allows you to extend your range and tune the AX//15 for different weights of BB, looking for the flattest possible trajectory. Once you have completed your HOP-up adjustment you can hit the mock bolt catch on the centre left of the receiver to release the mock bolt carrier with a satisfying metal-on-metal "clank".
Being an Aeroknox design, Double Eagle's AX//15 would not be complete without the Aeroknox ORION//GRIP pistol grip. This grip is a very unique design but feels fantastic in the hand, with a comfortable angle, high-quality polymer used and aesthetically pleasing recesses on each side which enhance grip. Also present on each side of the grip is the Aeroknox "A" logo, adding to the plethora of licenced trademarks on the AX//15 and heightening realism further still.
At the rear of the receiver, we have the good old M4/AR-15 buffer tube, providing 6 positions of adjustment for the pre-installed low profile stock. The buffer tube is constructed from alloy and also serves as the battery compartment of the AX//15. To remove the stock and access the battery compartment you will need to pull the adjustment pin of the stock out as far as it will go and slide the stock off to the rear.
Inside the buffer tube, you will find a Deans battery connector to which you mount your battery of choice. We recommend an 11.1V 1300mAh LiPo battery in stick configuration but some more compact nunchuck batteries such as the VP Racing 11.1V 1300mAh LiPo Crane stock battery will just about fit. If you need more battery space, you can always add a Crane stock thanks to the easy stock installation of buffer tube equipped ARs.
The stock itself features a grand total of 4 QD sling sockets. The pair at the front is ideally positioned for single-point sling use and the pair at the rear is ideally used with the front QD sockets on the handguard to mount a two-point sling. QD sling swivels are required to use these sockets, but there is also a conventional sling slot on the stock if you prefer a fixed sling. The adjustment lever of the stock is hidden inside the toe of the stock, kept well clear of snags to prevent accidental stock adjustments.
On the inside, the AX//15 is very well equipped, keeping pace with other Double Eagle EFCS-equipped AEGs but pulling ahead in its full metal construction. The inner barrel is a 6.04mm tightbore example, promising improved accuracy at range and a slight FPS boost thanks to improved air efficiency. The gears are constructed from steel and run on 8mm ball-bearing bushings, producing minimal audible drama as the gun fires and providing reduced friction for a longer lifespan. All of the gearbox internals are Tokyo Marui version 2 spec, meaning upgrades are easily within reach for those who simply cannot use an AEG without upgrading it!
As previously mentioned, the AX//15 is rocking the awesome Double Eagle FALCON EFCS MOSFET offering programmable fire controls which allow for burst modes or binary trigger to be programmed in using the selector switch and trigger of the AEG itself (instructions can be found below in the "Special Instructions" section). The FALCON also provides low voltage cutoff, preventing the AEG from being used when the battery voltage drops too low, and also allows you to select one of 3 different trigger sensitivity settings, from a hair trigger to a more realistic full pull. The trigger itself is a flat design which is great for pumping out those rapid semi-auto shots in CQB, made all the better by the astonishing trigger response provided by the FALCON.
If you like the look of the Double Eagle UTR556 and EK47, this is the ultimate iteration of that design. With gorgeous full metal construction, immaculate machining, precisely engraved trademarks and super slick ergonomics, the AX//15 is hard to beat on the outside, and its generously upgraded internals with the FALCON EFCS taking centre stage make it a serious contender in-game as a bonus!
Features
- Full metal construction
- Officially licenced by Aeroknox LLC, TX - Realistic trademarks across the design
- 6.04mm Tightbore inner barrel - Superb accuracy and range potential
- 14mm CCW Male threaded outer barrel - Ready for a tracer unit or suppressor
- Aeroknox Butterfly muzzle brake pre-installed - Looks fantastic, CNC aluminium construction
- Aeroknox AX//15 M-LOK handguard - M-LOK slots at 3, 6, 9 & 12 o'clock, 20mm sections up top
- 20mm Picatinny railed receiver - Ready for red dot sights or scopes to be mounted
- Highly detailed Aeroknox receiver - A perfect match for the real thing, unique and cutting-edge looks
- Ambidextrous extended fire selector switch - Prominent and easy to use, great for left and right-handed shooters
- Low profile charging handle - Stays well out of the way to reduce potential snag points
- Built-in enlarged trigger guard - Plenty of space for gloved users, part of the receiver for strength improvements
- QD Sling sockets on each side of the handguard & stock - Ready for QD sling swivels and single or two-point slings
- Mock forward assist deleted, low profile shell deflector - Reduces snag points for a slick handling experience
- Aeroknox ORION//GRIP - Ergonomic pistol grip design, full Aeroknox trademarks
- Extended magazine release - Large and prominent button, makes fast reloads under pressure easy
- 6-Position M4/AR-15 buffer tube - Allows the stock to be adjusted to suit your body type and loadout
- Low profile adjustable stock - Hidden adjustment lever, QD sling sockets and rubber butt plate
- Rear wired to a Deans battery connector - Deans to mini-Tamiya adapter included
- Recommended battery: 11.1V 1300mAh LiPo - Stick preferable but compact nunchucks will fit
- Compatible with M4/AR-15 AEG magazines - Spares are plentiful!
Package Includes
- Double Eagle M920A Aeroknox AX//15 AEG Rifle - FALCON EFCS
- 300rnd High capacity magazine
- 2 x M-LOK rail covers
- Deans to Mini-Tamiya adapter
- Deans connector kit
- User manual
FALCON EFCS MOSFET
Please note that the gun's EFCS system is only compatible with LiPo Batteries, and is not compatible with LiFe or NiMh batteries.
Please note that both binary fire and burst modes can be set, as binary fire is applied to semi, and 1-5 fire mode is applied to full auto.
Please note that fitting the supplied Deans connector kit will constitute a modification of the replica. If you carry out this modification you will not be able to return your replica.
FALCON EFCS Protection Feature
Gearbox Protection
When the current is too high or abnormal the power supply on the EFCS will disconnect to protect the motor and battery, and the motor will vibrate three times.
If the battery's voltage is too high the EFCS power supply will automatically disconnect and the motor will vibrate twice.
Battery Protection
The FALCON EFCS has an operating voltage between 6-13v. If the voltage is too low or too high the power supply will be cut. If the voltage of your battery is too low, the FALCON will notify the user via 5 vibrations, then cut the power to protect your battery.
Vibration Description
- 1 - Power On
- 2 - System Error
- 3 - Voltage too high
- 5 - Low Voltage
Falcon Electronic Fire Control System
1-5 Shot Mode
- Set the fire selector to SAFE.
- Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
- Pull the trigger once and release it to enter 1-5 shot programming mode. Release it when the motor makes a sound.
- Pull the trigger 1-5 times depending on the amount of shots you want a single trigger pull to make.
- Set the fire select to full auto.
Trigger Sensitivity
- Set the fire selector to SAFE.
- Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
- Pull the trigger twice and release it to enter sensitivity programming mode. Release it when the motor makes a sound.
- Pull the trigger between 1-3 times for different levels of sensitivity.
- 1 - Highest Sensitivity
- 2 - Standard Sensitivity
- 3 - Low Sensitivity
Binary Fire Mode
- Set the fire selector to SAFE.
- Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
- Pull the trigger three times and release it to enter binary fire programming mode. Release it when the motor makes a sound.
- Set the fire selector to semi-auto
- Repeat the same process to disable binary fire
Reset to Default
- Set the fire selector to SAFE.
- Pull the trigger and hold for 5 seconds to reset all settings.
Specification
General
 |
Assault Rifle
|
|---|---|
 |
Yes
|
 |
Yes,
No,
|
 |
Approx. 340fps ± 10%, using 0.20g BB
|
 |
Yes
|
 |
Yes
|
 |
|
 |
Regular Player
|
Weight and Dimension
 |
Approx. 2.385kg
|
|---|---|
 |
72.5cm
|
 |
80.5cm
|
Construction
 |
Black
|
|---|---|
 |
Steel mock bolt carrier, body pins and trim parts. CNC Aluminium muzzle brake & handguard. Alloy receiver, controls, buffer tube & outer barrel. High density polymer pistol grip & stock.
|
|
|
Polymer
Alloy
Aluminium
Steel
|
 |
Polymer
Alloy
Aluminium
Steel
|
Weapon Specific
 |
Electric
|
|---|---|
 |
None
|
 |
AR Platform, M4 / AR-15 / M16, Long Gun, Assault Rifle,
|
 |
Long Gun Magazine, Assault Rifle, M4 / AR Platform,
|
 |
   Programmable
|
 |
Trigger Disconnect
|
 |
Right Handed
|
 |
Standard
|
 |
1:1
|
 |
0.25g
|
Hop-Up
 |
Yes
|
|---|---|
 |
Rotary
|
 |
Behind mock bolt carrier, accessible when the charging handle is pulled and the mock bolt is locked to the rear.
|
Furniture
 |
|
|---|---|
 |
20mm RIS / RAS , 20mm Railed Receiver, M-LOK Rail system,
|
 |
Sliding , Multi-Position ,
|
|
|
6 Position
|
 |
Iron Sights , Aperture Iron Sight,
|
 |
Stock , Handguard , QD ,
|
Barrel
|
Outer Barrel Length (in)
|
11''
|
|---|---|
 |
Male
|
 |
CCW (Counter Clockwise)
|
 |
14mm
|
 |
6.04mm
|
 |
280mm
|
Magazine Specific
 |
High Capacity, AEG,
|
|---|---|
 |
Approx. 300 Rounds
|
 |
Fill Window
|
 |
Top
|
Electric Gun Specific Information
Gearbox
|
|
V2 Gearbox
|
|---|---|
 |
Rear Wired
|
 |
Yes
|
 |
Yes
|
Motor
 |
Standard
|
|---|
Battery Specific
 |
  |
|---|
Compatible Battery
 |
Li-Po
|
|---|---|
 |
Stick
|
 |
11.1v
|
Product Testing Data
 |
340 FPS +/- 10%
|
|---|---|
|
|
0.2g ASG BLASTER
|
|
|
03/10/2023
|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
| 328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
| Velocity | BB Weight (Grams) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
| 250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
| 260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
| 270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
| 280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
| 290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
| 300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
| 310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
| 320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
| 330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
| 340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
| 350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
| 360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
| 370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
| 380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
| 390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
| 400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
| 410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
| 420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
| 430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
| 440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
| 450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
| 460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
| 470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
| 480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
| 490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
| 500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
| 510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |
Need ideas for something extra?
- Tolerance: 5.95mm +/- 0.01mm
- Biodegradable BBs
- 0.25g Weight - 2200 or 6000rnd options
If you are looking for biodegradable BBs for use in both CQB skirmishes and out in the glorious woods, NUPROL have just the thing! The RZR 0.25g Precision BIO BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are constructed from a biodegradable polymer, meaning they will be allowed on even the strictest Airsoft sites and no need to worry about cleaning up after shooting!
- 14mm CCW or 14mm CW threads
- "Brrrrt" markings - 40mm Diameter version
- Foam filled for slight sound dampening
If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This suppressor is the 40mm diameter version, available in either 100mm or 150mm lengths; ideal for rifle and SMG builds.
This version of Specna's silencer is the 40mm "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text with a wider diameter than the standard. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!
- Bottles or Bags
- 0.25g Standard BBs
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are standard 0.25g BBs which are designed to work in any Airsoft gun, performing best in Airsoft guns which fire between 280fps - 370fps, and are the go-to weight for any Airsoft skirmisher looking for an the perfect all around weight for a standard AEG. Whether you're new to Airsoft, or a regular skirmisher, this weight of BB will most likely be your go-to BB weight, and is the most commonly used by Airsoft players.
- 0.25g BIO BBs
- Bottles or Bags
- ±0.01mm Tolerance
Produced by VORSK Airsoft, these Airsoft BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the VORSKs brand new range of Airsoft BBs ranging from light weight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.
These particular BBs are BIO 0.25g BBs which are created from biodegradable materials so that they will gradually break down with time when exposed to natural environments. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.
This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.
- Foam Filled
- Spring Core
- 14mm CCW / CW
An Alloy constructed Suppressor with Foam Baffles and a Spring Core for support. The end caps of the Suppressor can be unscrewed to access the internals. Designed for Airsoft replicas with a 14mm CCW or CW Thread, this Muzzle Device is the perfect accessory to conceal an Inner Barrel extension, or just to add a personal touch to your Airsoft Gun.
This suppressor has a clever feature which is that it has a 14mm CCW thread on one end and a 14mm CW thread on the other, as such it is compatible with both thread types.
- Aluminium construction
- Mounts to 14mm CCW male threads
- Internal foam baffles to reduce muzzle report
If you are looking for a sneaky aesthetic and reduced muzzle report, the Novritsch Rifle Suppressor will give you just that! This suppressor is constructed from aluminium and has internal baffles made from acoustic foam which will reduce the muzzle report of your primary and make you harder to locate.
The Novritsch Rifle Suppressor is compatible with any Airsoft gun which uses 14mm CCW male barrel threading and has an aggressive ported front end, providing some visual interest to the design which marks it out as something a bit different from the usual, boring tube suppressors.
On the inside, Novritsch has gone above and beyond, using 2 different sized baffles to muffle the muzzle report, widening at the end to prevent BBs from shattering inside and ruining that perfect shot. The front cap can also be removed, so if you want to change the filling to your own secret suppression formula, you are free to do so. Whether you are taking your sniper rifle build in a sneaky direction or you are creating an assault rifle with an emphasis on stealth, the Novritsch Rifle Suppressor is the perfect finishing touch!
Like this Airsoft Gun? Check out these awesome Products!
- £20 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- £10 Gift Voucher
- Usable In-Store
- Usable Online
As the time approaches for birthday, Christmas and special occasion gifts, it can be a bit nerve wracking trying to decide what Airsoft Gift to buy. Airsoft players are a unique lot; what one person likes another may hate, and there's nothing worse than purchasing a gift to find out the person doesn't like it! We've created a Gift Card for this very situation, which can be purchased and redeemed against buying kit from our website! Let the Airsoft player in your life choose the present they want the most, or contribute towards that gun they've always wanted!
For Terms and Conditions please see: Terms and Conditions Page.
- Full metal construction
- Matt black with gold outer barrel
- Combat styled Hi-capa long boi
If your friends are using the R604, this pistol is the key to making them feel inadequate! Introducing the R608 Hi-capa Combat XL from Army Armament, a Hi-capa based pistol with a combat leaning, now in a new, lengthened flavour! The pistol combines the well liked aggressively stippled grips of the R604 and JW3 GBB pistols with a shorter dust cover and 5.5-inch outer barrel with extended slide; akin to the original "Silverballer" of the well-known man of hits video game but in a slightly more practical length!
- Full metal construction
- Functional De-cocking lever
- 20mm frame rail and 12mm female threaded barrel
If you are eyeing up a new sidearm but aren't up for the more common Hi-capa and EU series perhaps a classic Italian designed pistol would suit your tastes? Introducing the Raven R9 GBB, Raven's entry into the B9 series of Airsoft pistols. The real B9 was most famously issued to the US Army in the 1980s, replacing the venerable M1911.
- 1:1 Scale Replica
- Supreme build quality
- Beautiful licensed H&K trademarks
If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!
- Textured Grip
- Decocking Lever
- Gas Blowback Pistol
A Gas Blowback 6mm BB Airsoft Pistol, based on the Sig Sauer P229 service pistol, used by U.S. Government Forces and more.
- Quick Change Spring
- Electric Blowback AEG
- Unique KeyMod Handguard
Built by Specna Arms as part of their G11 series of AR36 clone rifles, but this one has a difference. Not only does it have a non-standard KeyMod handguard, but also features an internal electronic blowback system which gives the AEG a more exiting firing experience with a bit of recoil for enhanced realism.
- MOSFET System
- POLYMER Version
- KeyMod Rail System
If you are looking for a skirmish-oriented primary which gives you all you need to cut through the hoards, the Wildhog has your name on it! The G&G CM16 Wildhog is the G&G Combat Machine reinvented with the superb G&G G2 gearbox and a programmable ETU which allows for burst mode, all housed in G&Gs rock solid polymer receiver with an updated shape and design to give it a slick, modern style. If you seek something robust with above-average performance and some slick advanced features, the Wildhog is the one!
- 6.03mm Tightbore inner barrel
- High density polymer construction
- Spenca's featherweight AR-9 offering
If your primary weighs a ton and you are looking for a lightweight alternative, the Specna Arms SA-FX01 is the ideal choice. This AR-9 style AEG is constructed from Spenca's fantastic high density polymer and is rocking the same internals as the established FLEX™ series, allowing it to tip the scales at a minuscule 1.8kg without compromising on in game performance or aesthetics.
The SA-FX01 is equipped with an M-LOK handguard featuring QD sling sockets straight out of the box, giving you a modern front end with wide accessory compatibility and a slick, cutting-edge look. The receiver is patterned after real steel "billet" AR receivers, blending perfectly with the M-LOK handguard while offering plenty of space to easily mount a scope or red dot sight for better effect on target. On the inside, things are equally impressive. A 6.03mm tightbore inner barrel provides the accuracy needed to send the enemy back to respawn, and a modern rotary HOP-up unit allows you to extend your range and tune for different ammo weights.
Whether you are fresh to Airsoft skirmishing or a veteran looking for a lightweight primary weapon option for enhanced mobility, the SA-FX01 brings full-fat AEG performance to the table with only slightly more mass than a beachball!
- Integrated optical sight
- Front 20mm RIS rail
- Bullpup configuration
Bullpup rifles, you either love 'em or you hate 'em. But assuming you've found your way to this page, we're guessing you're on team rear mag. This variant features a shorter barrel so the compact nature of the AUG is augmented further, giving you a long hidden inner barrel with a vastly reduced footprint when held against your person.
With an integrated scope and front para 20mm rail with pistol grip included, this variety of AUG is great for both CQB and longer range outdoor skirmishing alike, giving you the best of both worlds. With a sturdy and compact design, bullpup fans, you may have just found your new favourite primary.
- M-LOK Compatible
- Dynamic AK Platform
- Multiple Stock Variants
A 6mm BB Airsoft Electric Gun, based on the AK-102, and given a comprehensive overhaul, creating an Operator Platform that is incredibly dynamic.
- Tactical Appearance
- Alloy M-LOK Handguard
- Hi-tech Internal Enhancements
The Double Eagle M90 range presents an innovative & unique range of AR-15 / M4 Airsoft replicas to the market, offering an inimitable exterior build quality with advanced next-gen internals and adorned with the latest in modern firearm furniture, so get your NODS on, it's about to get operator AF up in here.
- Full Auto Version
- Gas Blowback Pistol
- Racoon City Police Ver
Yes it shoots full auto and yes it can be yours! This is the lavish and exuberant variant of the ever popular Biohazard series of Airsoft Pistols, featuring 'Racoon City Police' trademarks.
- Thread adaptor and rail
- Extended base plate
- Light enhancing sights
Army Armament have taken Airsoft 1911's to the next level, with a sweet array of advanced features.
The extended magazine and light enhancing ironsights as well as the textured grip and beavertail safety come together for a true operator's sidearm. With satisfying trigger response and recoil this 1911 is a modern twist on an iconic pistol.
- Square Ironsights
- CO2 Compatible
- Textured Grip
A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a faithful replica of the real world pistol it represents. The pistol features a Semi-Automatic Gas Blowback system, meaning that a Single Round is Discharged for every Trigger Pull and also Simulates Recoil for a more realistic experience.
This is the perfect sidearm for any Airsoft player, allowing you to quickly and effectively protect yourself from any threat should your main weapon go down or the enemy engage you in a CQB Environment.
- Full metal construction
- Modern AK support weapon
- Includes steel folding bipod
If you're an AK fan and you are looking for something bigger, the RPK is what you need! The CM.052A RPK-74M is a faithful replica of the latest variant of the RPK light support weapon, a lengthened and strengthened AK47 based design intended to provide a high volume of fire and increased accuracy at squad level. The CM.052A sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and modern polymer furniture matching that which is currently issued to Russian armed forces. The RPK-74M takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45 round style high cap magazine which holds a whopping 800 BBs!
- Revolver Grenade Launcher
- Can fire 6x MOSCARTs in rapid succession
- The ultimate Airsoft firepower!
If you need to bring some serious firepower to your next skirmish there are few platforms that can rival a 6-shot revolver grenade launcher! The NUPROL Matrix MGL can carry up to 6 40mm MOSCART grenade shells and unleash their payloads in under a second thanks to its revolver-like design, based on the real steel Milkor M32 MGL.
The Matrix is similar to other revolver grenade launchers we have seen in the past but with a few notable improvements. The outer barrel of the Matrix is constructed from aluminium and has a threaded tip, meaning more realistic handling, though we don't think there are any suppressors for this monstrously large thread!
The pistol grip of the original MGL has been replaced with a VFC QRS pistol grip, boasting enhanced ergonomics and crackle texture on each side for improved grip. The stock still mounts to the good old M4/AR-15 buffer tube, but the pre-installed stock on the Matrix is the VFC QRS stock, offering a snag-reducing A-frame style design with QD sling sockets on either side.
Whether you have vehicles to deal with in an upcoming Milsim skirmish or you simply want to be the badest bunker buster on the field, the NUPROL Matrix MGL will equip you to clear the enemy out of any emplacement like a bad fart clears a room!
- Full metal construction
- 6.01mm Steel tightbore inner barrel
- An AK dressed for 21st century combat
If you are a fan of the AK platform but want something that can be equipped like a modern AR, the ARCTURUS AK74 TWS M-LOK Carbine should satisfy your needs! This AK is built like a tank, much like ARCTURUS's other AK offerings, but is equipped with a 20mm railed receiver cover and M-LOK/Picatinny hybrid handguard to allow a wide range of modern western accessories to be mounted seamlessly, with no need for adapters or improvised solutions.
On the inside, we are equally well equipped with the AK74 TWS. This AEG has a 6.01mm steel tightbore inner barrel, a modern rotary style AK HOP-up unit and some well chosen internal upgrades focussing on reducing friction and improving the efficiency of the system, and the result is impressive performance with little to go wrong. Those after an AK that can do everything an AR can, this one is for you!