- FAST Maritime replica
- ARC Rail & NVG Mount equipped
- Perfect for a Navy SEAL or DEVGRU loadout
If you are sick of stinging headshots, a helmet will cure that! The FAST Maritime Helmet Replica from FMA is a Milsim-friendly way to keep your head protected in game and comes kitted out with ARC accessory rails and an NVG mount so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly but is not ballistic and is only designed for looks.
The real steel version of this helmet is used by DEVGRU, the Green Berets, the 75th Ranger Regiment and the Marine Raider Regiment (MRR/MSOR) and is a close match for the LBH Helmet used by the US Navy SEALs, making it a fine choice for the Milsim inclined. If you want to avoid painful headshots and look elite at the same time, this is the way to do it!
- NVG Mount
- ARC Side Rails
- Lightweight & Tough
This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.
- NVG Mount
- ARC Side Rails
- Lightweight & Tough
This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.
- NVG Mount
- ARC Side Rails
- Lightweight & Tough
This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.
- Full MOLLE Rig
- Fully Adjustable
- 5x STANAG Pouch
With 5 x M4 pouches, 2 x pistol magazine pouches and more, this is an excellent starting point for someone who doesn't want to go through the effort of building their own rig.
- Triple 7.62/AR36 mag pouch
- Mounts to MOLLE webbing
- Elastic retention loops
If you've got a lot of mags and need to keep them secure and to hand at all times, this Triple Open Top 7.62 Magazine Pouch is for you! Constructed from 1000D polyester, this mag pouch holds 3 x 7.62x51 style magazines, including SCAR-H, G3, AR-10/SR25, and can also take AR36 and AK-74/74 mags. This pouch will not fit 417-style magazines.
Each magazine is retained with elasticated loops and can be mounted wherever you have MOLLE webbing, including your rig, belt and backpack. On the front of the pouch, we have additional MOLLE loops so you can stack more MOLLE pouches on the front for heavier loadouts.
- MOLLE Mountable
- Included Shoulder Strap
- Carry Shotgun as Secondary
A MOLLE mounted or shoulder-slung scabbard which allows you to stow a shotgun on your back for safe keeping and quick deployment.
- MOLLE Mountable
- Included Shoulder Strap
- Carry Shotgun as Secondary
A MOLLE mounted or shoulder-slung scabbard which allows you to stow a shotgun on your back for safe keeping and quick deployment.
- Distinctive Skull Logo
- 14mm CCW Threads
- 196mm Long
Constructed from durable alloy and is foam filled to assist in suppressing muzzle sounds.
- Carry Two Rifles
- Backpack Carry Strap
- Additional Accessory Pockets
A large Rifle Bag designed to carry up to two Rifles, with one Short, and one Long pocket, and an array of others allowing you to carry everything you need for a day's Skirmish.
- 2 x Rear Pouches
- Internal Organiser
- MOLLE Compatible
A MOLLE compatible Admin/Utility Pouch for Chest Rigs and Tactical Vests that have available MOLLE loops. It is secured by a Dual Glove-Friendly Zips and features an Internal Organiser, as well as Front Velcro ID Panel and 2 x Rear M4 Magazine Pouches.
- Quick Detach
- Included Flashhider
- Knights Armament Style
Based on a design by KAC, this is an Airsoft flash hider and quick-detach suppressor designed to fit on any Airsoft gun with a 14mm counterclockwise thread - conveniently, that's most Airsoft guns!
- FAST Ballistic replica
- ARC Rail & NVG Mount equipped
- Perfect for UKSF, CTSFO & Pathfinder loadouts
If you prefer hearing a loud "thwack" when you take a headshot over feeling pain, the FMA FAST Ballistic Helmet Replica will suit your preferences! This helmet is a detailed reproduction of the ever-popular FAST helmet design in its Ballistic cut, though it is only for looks and won't protect you from real rounds, only Airsoft BBs!
The FAST Ballistic Helmet Replica comes kitted out with ARC accessory rails and an NVG mount straight out of the box so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly. Whether you are working on an SAS/UKSF loadout or you simply need a stylish way to protect your cranium, a FAST helmet is a great call!
- Fully Adjustable
- 3 x STANAG Pouch
- Lightweight MOLLE Rig
A fully loaded lightweight rig, allowing the user to carry gear and organise pouches, without the heavy weight of a plate carrier, allowing faster movement. The rig is manufactured using heavy duty 600D Nylon, meaning it will take lots of punishment.
- Full metal construction
- Gen.2 - Fire selector built into the charging handle
- Steel upper receiver - Super realistic build!
The AGM MP40 AEG brings one of the early Twentieth Century's most iconic and infamous machine pistols onto the Airsoft market. If you are looking for an SMG for WW2 reenactment, you can't beat an MP40, whether you are running a Wehrmacht loadout, resistance fighter or allied loadout, the MP40 has found its way into the hands of many unlikely users as a battlefield pickup weapon and is still used today in conflict zones around the world by various rebel groups.
AGM's MP40 boasts full metal construction, offering a realistically hefty build to satisfy those who want the most true-to-life experience when skirmishing. Internally, the MP40 makes use of a modified version 3 gearbox, meaning upgraded gears and cylinder groups are a go for performance seekers. Whether you are working on your WW2 loadout or you want an interesting and rarely seen primary for walk-on skirmishes, the AGM MP40 is ideal for the job.
- Low Profile
- Mock Ballistic Inserts
- Modular Configuration
A low profile, lightweight Plate Carrier with mock ballistic inserts, designed to be compact, whilst at the same time being practical and modular.
- Low Profile
- Mock Ballistic Inserts
- Modular Configuration
A low profile, lightweight Plate Carrier with mock ballistic inserts, designed to be compact, whilst at the same time being practical and modular.
- Highly Consistent
- Rock Solid Quality
- Scope & Bipod Inc.
A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.
- Highly Consistent
- Rock Solid Quality
- Scope & Bipod Inc.
A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.
- Highly Consistent
- Rock Solid Quality
- Scope & Bipod Inc.
A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.
- Highly Consistent
- Rock Solid Quality
- Scope & Bipod Inc.
A delightfully consistent spring-powered bolt action M40A5 replica from Specna Arms; made to a stunning standard with everything you need you get sniping right out of the box, including 3 x magazines, a bipod and a scope.
- Fully Adjustable
- 1.5-5x variable magnification
- Includes cantilever scope mount for 20mm rail
If you are after a mid sized rifle scope for your DMR or Snipers rifle, take a look at the 1.5-5X40 BE scope from Theta Optics! Fully adjustable and featuring a crisp Mil-dot reticle which can be illuminated red, green or blue with varying levels of brightness, the 1.5-5X40 BE Scope is perfectly suited to both short and long range precision.
- Full metal construction
- ZET System GBBR - TM compatible internals
- Ferocious recoil, realistic handling - Just awesome!
If you have a taste for realism, recoil and a new challenge in game, the Noveske N4 GBBR from EMG will give you what you need. This Gas Blowback Rifle boasts full metal construction, licenced Noveske trademarks and internals based on the best of the best when it comes to GBBRs; the Tokyo Marui ZET system.
Not for the faint of heart or those who like to fight easy, a GBBR provides unparalleled realism with its realistic manual of arms involving loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While a GBBR is a challenge to operate compared to a simple AEG, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.
Licenced by Noveske through EMG and manufactured by Double Eagle, the N4 has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks which tie the whole piece together. The N4 GBBR also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR running in the long term. If you have been holding out on a GBBR, waiting for something to pop up that has the right balance of affordability, efficiency and aftermarket support, now is the time!
- 42rnd Capacity
- Alloy construction
- Magazine for HFC HG-203 MAC-11 GBB
If you are running a MAC-11 GBB that unbelievable rate of fire will have you needing plenty of spare mags, so stock up while they're hot! The HG-203 MAC-11 Green Gas Magazine from HFC holds 42 BBs, all of which will be gone in a couple of seconds on full auto! The magazine can be loaded through the feed lips by pulling the follower down to the bottom, where it will lock into place. You can load this mag either by hand or by using an Airsoft speed loader. Once you are finished loading, press the small protruding tab on the follower to release it and reapply tension to the feed spring. The fill valve is located on the bottom of the magazine and can be filled with summer gas or green gas.
- 2x MOLLE Straps
- Velcro Closing Straps
- Holds 3x SMG-5 Magazines
Holding up to 3 magazines at a time within the Velcro secured pouches, and being capable of attaching onto any vest, belt or rig which is MOLLE Compatible, this pouch is perfect for SMG-5 users.
- 6.02mm Precision barrel
- Stainless steel construction
- AEG Barrel cut - Fits most Airsoft AEGs
If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.
This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!
- Full uniform set
- Includes knee pads
- Gen.3 Style cut
If you're looking for a fantastic value complete uniform in an attractive modern cut, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is a fine choice. A complete set inspired by a famous real-world Gen.3 combat uniform, the 8Fields Tactical version includes a UBACS style combat shirt, combat trousers and knee pads with an expansive range of flat colour and camouflage colour options to choose from!
The body of the shirt is 100% sweat-wicking cotton, intended to help you stay cool while wearing body armour or a plate carrier, and each sleeve features a velcro-secured admin pocket with additional velcro on the outside for I.D or morale patches. On each sleeve, the Combat Shirt is equipped with elbow pad pockets so you can add elbow pads to keep you protected when crawling. The collar is equipped with a zip, so you have the choice of zipping up to protect your throat or unzipping for improved airflow and cooling.
The combat trousers are constructed from a 65% polyester 35% cotton mix and are littered with considerately designed pockets. On each leg, we have a large cargo pocket, a thigh pocket, the usual angled trouser pocket and a lower leg pocket. The ride height of the knee pads can also be adjusted via bungee cord concealed inside the thigh pockets, meaning you will never feel the pain of kneeling on a thorn in the woods or a BB in CQB. Trust us, it hurts!
Sizing-wise, please refer to the size charts in the product images to ensure you get a proper fit. At a far cheaper pricepoint than equivalent Gen.3 combats with no quality compromises, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is ideal for veteran skirmishers needing a fresh new loadout or new skirmishers seeking the elite look!
- Full uniform set
- Includes knee pads
- Gen.3 Style cut
If you're looking for a fantastic value complete uniform in an attractive modern cut, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is a fine choice. A complete set inspired by a famous real-world Gen.3 combat uniform, the 8Fields Tactical version includes a UBACS style combat shirt, combat trousers and knee pads with an expansive range of flat colour and camouflage colour options to choose from!
The body of the shirt is 100% sweat-wicking cotton, intended to help you stay cool while wearing body armour or a plate carrier, and each sleeve features a velcro-secured admin pocket with additional velcro on the outside for I.D or morale patches. On each sleeve, the Combat Shirt is equipped with elbow pad pockets so you can add elbow pads to keep you protected when crawling. The collar is equipped with a zip, so you have the choice of zipping up to protect your throat or unzipping for improved airflow and cooling.
The combat trousers are constructed from a 65% polyester 35% cotton mix and are littered with considerately designed pockets. On each leg, we have a large cargo pocket, a thigh pocket, the usual angled trouser pocket and a lower leg pocket. The ride height of the knee pads can also be adjusted via bungee cord concealed inside the thigh pockets, meaning you will never feel the pain of kneeling on a thorn in the woods or a BB in CQB. Trust us, it hurts!
Sizing-wise, please refer to the size charts in the product images to ensure you get a proper fit. At a far cheaper pricepoint than equivalent Gen.3 combats with no quality compromises, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is ideal for veteran skirmishers needing a fresh new loadout or new skirmishers seeking the elite look!
- Full uniform set
- Includes knee pads
- Gen.3 Style cut
If you're looking for a fantastic value complete uniform in an attractive modern cut, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is a fine choice. A complete set inspired by a famous real-world Gen.3 combat uniform, the 8Fields Tactical version includes a UBACS style combat shirt, combat trousers and knee pads with an expansive range of flat colour and camouflage colour options to choose from!
The body of the shirt is 100% sweat-wicking cotton, intended to help you stay cool while wearing body armour or a plate carrier, and each sleeve features a velcro-secured admin pocket with additional velcro on the outside for I.D or morale patches. On each sleeve, the Combat Shirt is equipped with elbow pad pockets so you can add elbow pads to keep you protected when crawling. The collar is equipped with a zip, so you have the choice of zipping up to protect your throat or unzipping for improved airflow and cooling.
The combat trousers are constructed from a 65% polyester 35% cotton mix and are littered with considerately designed pockets. On each leg, we have a large cargo pocket, a thigh pocket, the usual angled trouser pocket and a lower leg pocket. The ride height of the knee pads can also be adjusted via bungee cord concealed inside the thigh pockets, meaning you will never feel the pain of kneeling on a thorn in the woods or a BB in CQB. Trust us, it hurts!
Sizing-wise, please refer to the size charts in the product images to ensure you get a proper fit. At a far cheaper pricepoint than equivalent Gen.3 combats with no quality compromises, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is ideal for veteran skirmishers needing a fresh new loadout or new skirmishers seeking the elite look!
- Full uniform set
- Includes knee pads
- Gen.3 Style cut
If you're looking for a fantastic value complete uniform in an attractive modern cut, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is a fine choice. A complete set inspired by a famous real-world Gen.3 combat uniform, the 8Fields Tactical version includes a UBACS style combat shirt, combat trousers and knee pads with an expansive range of flat colour and camouflage colour options to choose from!
The body of the shirt is 100% sweat-wicking cotton, intended to help you stay cool while wearing body armour or a plate carrier, and each sleeve features a velcro-secured admin pocket with additional velcro on the outside for I.D or morale patches. On each sleeve, the Combat Shirt is equipped with elbow pad pockets so you can add elbow pads to keep you protected when crawling. The collar is equipped with a zip, so you have the choice of zipping up to protect your throat or unzipping for improved airflow and cooling.
The combat trousers are constructed from a 65% polyester 35% cotton mix and are littered with considerately designed pockets. On each leg, we have a large cargo pocket, a thigh pocket, the usual angled trouser pocket and a lower leg pocket. The ride height of the knee pads can also be adjusted via bungee cord concealed inside the thigh pockets, meaning you will never feel the pain of kneeling on a thorn in the woods or a BB in CQB. Trust us, it hurts!
Sizing-wise, please refer to the size charts in the product images to ensure you get a proper fit. At a far cheaper pricepoint than equivalent Gen.3 combats with no quality compromises, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is ideal for veteran skirmishers needing a fresh new loadout or new skirmishers seeking the elite look!