Airsoft Helmets & Helmet Accessories

If your helmet is a bit battered, no need to get a new one! The PTS Syndicate Impact Liner for PTS MTEK FLUX Helmet is a complete set of internal padding, the same type used in the PTS MTEK Flux Helmet. The foam padding is very comfortable, a considerable step up from the padding found in most clone helmets and thankfully, this padding should fit other helmets provided they have removable pads and internal velcro.

Whether you're seeking replacement padding for hygiene reasons or you want a comfort improvement, the PTS Syndicate Impact Liner for PTS MTEK FLUX Helmet will do the trick!

If you're after a menacing armoured look but don't want to sweat too much, the Novritsch Premium Tactical FAST Bump Helmet is a fine choice! This helmet replicates the real steel Bump FAST helmet, featuring ARC accessory rails on each side and an NVG mount up front, complete with a protective insert.

The set includes external Velcro, which can be mounted wherever you need it, allowing you to style up your lid with morale and I.D patches. Also included is a modular pad set, allowing you to get the perfect fit, regardless of your head geometry and whether you wear a comms headset or not.

One of the best features of this helmet is its OCC adjustment dial, located on the rear of the suspension. The OCC dial provides perfect stability when cranked down, meaning if you have an action camera or other kit mounted to your lid, it won't slide around on your head during dynamic movements. If you're going for the kitted-out look and need a lightweight but solid helmet that looks the business, Novritsch Premium Tactical FAST Bump Helmet is exactly that!

If you are looking for a helmet but want to remain light on your feet, the FMA FAST BJ Helmet Replica is definitely worth a look. This helmet is styled after the Base Jump/Bump FAST helmet and features a built-in NVG mount at the front, ARC rails on either side and a ported shell to improve airflow and comfort along with reducing the chances of goggles fogging. 

Also featured in this helmet is the game-changing OCC adjustment dial, designed to keep the helmet super snug and stable on your head no matter what you have mounted or how hard you sprint. If you're planning on running a GoPro or other action camera to record your Airsoft escapades, this is one of the most stable platforms you can mount it to!

If you're looking for a stylish cover for your FAST Maritime replica, the FMA Multifunctional Cover is a great shout. This helmet cover includes a built-in counterweight pouch, ideally suited to a strobe light, power bank or other small accessories. As with other helmet covers, the Multifunctional Cover includes loops for foliage and cable routing, Velcro panels for Morale and I.D patches and a cutout for the NVG mount up front. 

This cover is designed specifically for the FAST Maritime helmet cut and won't fit other FAST helmets like the PJ, Bump or Ballistic. If you operate in many different environments and like to change your camo to suit, this helmet cover can help you stay concealed and look fantastic while doing it!

If you are sick of stinging headshots, a helmet will cure that! The FAST Maritime Helmet Replica from FMA is a Milsim-friendly way to keep your head protected in game and comes kitted out with ARC accessory rails and an NVG mount so you can dress it up in true SF style. This helmet is constructed from high density polymer with a textured surface finish which matches the real thing perfectly but is not ballistic and is only designed for looks. 

The real steel version of this helmet is used by DEVGRU, the Green Berets, the 75th Ranger Regiment and the Marine Raider Regiment (MRR/MSOR) and is a close match for the LBH Helmet used by the US Navy SEALs, making it a fine choice for the Milsim inclined. If you want to avoid painful headshots and look elite at the same time, this is the way to do it!

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.

This Airsoft Replica Ballistic Helmet is both lightweight and tough, offering protection from Airsoft Hits for your head, as well as allowing you to mount accessories, and just to enhance the look of your loadout. If you're looking to secure an operator loadout, then a brain bucket should be high on your list.

If you want to change up the looks of your FAST helmet, the 8Fields Tactical Helmet Cover for FAST Helmets is what you need. This cover is made from polyester mesh with external velcro to mount I.D or morale patches and style up your lid. The helmet cover is available in either "Mod.A" or "Mod.B" versions, with the Mod.A being ideal for FAST Bump helmets with their built-in NVG mount and Mod.B being suitable for FAST Ballistic style lids with a Norotos universal shroud style NVG mount. 

Available in a wide range of flat colours and camouflage patterns, the 8Fields Tactical Helmet Cover for FAST Helmets is the perfect way to help your helmet blend in in a wide range of outdoor and indoor environments!

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

A tough lower face Mandible for Fast Helmets which will protect your smile and make your helmet set up look absolutely boss, without compromising your ability to breathe.

If you are after the latest and greatest bump helmet available, you have found it! Complete with the latest variant of the ARC helmet accessory rails and an alloy insert in the pre-installed NVG/ action camera mount, the Next-generation Spec-Ops bump helmet is ready to be tarted up to suit your loadout!

A set of Adapters to attach your EARMOR Active Ear Protection Headsets to an M-TEK Flux Helmet Rail. If you own a pair of EARMOR Active Ear Defenders (such as the M32) and a M-TEK Flux Helmet, then this is the most efficient and comfortable way to combine the two. This method of mounting removes the needs for the large and cumbersome headband, making them far more pleasant to wear for a long skirmish.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If your helmet keeps getting you spotted, add the Novritsch 3D Camo Cover for FAST High-cut Helmet! This helmet cover is designed specifically for FAST High-cut helmets and replicas, constructed from a mixture of ripstop fabric and UV-resistant polyester mesh. The cover includes laser-cut 3D leaves to help break up your outline and disguise the usual shiny finish of most Airsoft helmets. 

If you're going for maximum concealment, add Novritsch LC1 Leaf Camouflage for an even greater edge out in the woods. Available in the usual range of camo patterns along with Novritsch's unique Kreuzotter pattern, the 3D Camo Cover for FAST High-cut Helmet is exactly what the woodland warrior needs for a stealthy playstyle!

If your helmet keeps getting you spotted, add the Novritsch 3D Camo Cover for FAST High-cut Helmet! This helmet cover is designed specifically for FAST High-cut helmets and replicas, constructed from a mixture of ripstop fabric and UV-resistant polyester mesh. The cover includes laser-cut 3D leaves to help break up your outline and disguise the usual shiny finish of most Airsoft helmets. 

If you're going for maximum concealment, add Novritsch LC1 Leaf Camouflage for an even greater edge out in the woods. Available in the usual range of camo patterns along with Novritsch's unique Kreuzotter pattern, the 3D Camo Cover for FAST High-cut Helmet is exactly what the woodland warrior needs for a stealthy playstyle!

If your helmet keeps getting you spotted, add the Novritsch 3D Camo Cover for FAST High-cut Helmet! This helmet cover is designed specifically for FAST High-cut helmets and replicas, constructed from a mixture of ripstop fabric and UV-resistant polyester mesh. The cover includes laser-cut 3D leaves to help break up your outline and disguise the usual shiny finish of most Airsoft helmets. 

If you're going for maximum concealment, add Novritsch LC1 Leaf Camouflage for an even greater edge out in the woods. Available in the usual range of camo patterns along with Novritsch's unique Kreuzotter pattern, the 3D Camo Cover for FAST High-cut Helmet is exactly what the woodland warrior needs for a stealthy playstyle!

If your helmet keeps getting you spotted, add the Novritsch 3D Camo Cover for FAST High-cut Helmet! This helmet cover is designed specifically for FAST High-cut helmets and replicas, constructed from a mixture of ripstop fabric and UV-resistant polyester mesh. The cover includes laser-cut 3D leaves to help break up your outline and disguise the usual shiny finish of most Airsoft helmets. 

If you're going for maximum concealment, add Novritsch LC1 Leaf Camouflage for an even greater edge out in the woods. Available in the usual range of camo patterns along with Novritsch's unique Kreuzotter pattern, the 3D Camo Cover for FAST High-cut Helmet is exactly what the woodland warrior needs for a stealthy playstyle!

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

If it's finally time for you to get some comms going and you want to rock the best, this bundle is here to help you out! Containing one of the best helmets and best headsets available on the market, equipping this setup will send the message that you know what you're doing.

If you want to give your lid a new look, the PTS Syndicate Velcro Kit for MTEK FLUX Helmet lets you do just that! Designed for the PTS MTEK FLUX but compatible with most other Airsoft helmets, this velcro kit is easy to install thanks to its self-adhesive backing. This kit is available in two variants, interior and exterior.

The exterior version mounts to the outside of your helmet and allows you to kit your brain bucket out with morale and I.D. patches and other velcro-mounted accessories. The interior version makes a great replacement for worn-out interior velcro and can be a great way to rearrange your helmet's interior padding for a more comfortable fit.

If you're refurbishing an old helmet or need to replace some ageing padding, PTS has your back! The Comfort Pads for PTS MTEK FLUX Helmet mount to the internal Velcro inside FLUX and other helmets, allowing you to get the perfect fit on your noggin thanks to their modular design.

While designed specifically for the PTS MTEK FLUX Helmet, these pads should fit most other helmets with removable padding and internal Velcro, making them a great upgrade for extra comfort. Whether you seek replacement padding for hygiene reasons or your helmet slides around on your head as you run, the PTS Syndicate Comfort Pads for PTS MTEK FLUX Helmet are ideal!

If you're running a GoPro or other action camera on your FAST High-cut, add the Novritsch Helmet Pouch for FAST High-cut Helmets to store your power bank! This helmet pouch is designed primarily for counterweights to balance your lid when NVGs are mounted or power banks so you can keep your footage rolling all day long.

The pouch itself is constructed from a combination of Nylon and PVC, including elastic loops which are ideal for accessory batteries or chem-lights. Velcro is present along the top of your helmet when installed, allowing you to customise it with I.D and Morale patches. While it is designed specifically for the Novritsch Tactical Helmet, this helmet pouch should also fit most FAST High-cut helmet clones. The Novritsch Helmet Pouch for FAST High-cut Helmets adds a side of style to your helmet with loads of functional benefits!

If you're running a GoPro or other action camera on your FAST High-cut, add the Novritsch Helmet Pouch for FAST High-cut Helmets to store your power bank! This helmet pouch is designed primarily for counterweights to balance your lid when NVGs are mounted or power banks so you can keep your footage rolling all day long.

The pouch itself is constructed from a combination of Nylon and PVC, including elastic loops which are ideal for accessory batteries or chem-lights. Velcro is present along the top of your helmet when installed, allowing you to customise it with I.D and Morale patches. While it is designed specifically for the Novritsch Tactical Helmet, this helmet pouch should also fit most FAST High-cut helmet clones. The Novritsch Helmet Pouch for FAST High-cut Helmets adds a side of style to your helmet with loads of functional benefits!

If you're working on a retro loadout, the 8Fields Tactical US Army M1 WW2/Vietnam War Helmet Replica belongs on your noggin! This near-flawless replica of the real steel US Army M1 helmet is constructed with a metal exterior shell and plastic liner with an adjustable Nylon suspension. Sizing-wise, the M1 is suitable for head sizes between 58cm and 62cm approximately and may require adjustment for a comfortable fit. 

The real steel M1 served with the US Army from 1941 right up until 1985, making it ideal for any US forces loadout from WW2, the Vietnam War or any other historical conflict which occurred over this era. The M1 design was copied or sold as surplus to a vast number of different nations and is still used to this day by many. 

As Aliens enthusiasts will also be aware, the M1 was used as the basis for the USCM M10 Pattern Ballistic Helmet and with a few mods, the 8Fields Tactical US Army M1 WW2/Vietnam War Helmet Replica would be perfect in this role!

If you're looking for an affordable Airsoft helmet with plenty to shout about, the Novritsch Tactical FAST Bump Helmet is a fantastic option. This helmet replicates the real steel Bump FAST helmet, featuring ARC accessory rails on each side and an NVG mount up front, complete with a protective insert. ARC rails allow you to adapt your helmet to suit the mission at hand, part of a vast ecosystem with a wide range of customisation options.

The set includes external Velcro, which can be mounted wherever you need it, allowing you to style up your lid with morale and I.D patches. Also included is a modular pad set, allowing you to get the perfect fit, regardless of your head geometry and whether you wear a comms headset or not.

One of the best features of this helmet is its OCC adjustment dial, located on the rear of the suspension. The OCC dial provides perfect stability when cranked down, meaning if you have an action camera or other kit mounted to your lid, it won't slide around on your head during dynamic movements. If you're gearing up on the cheap, the Novritsch Tactical FAST Bump Helmet is the lid for you!

If you're looking for an affordable Airsoft helmet with plenty to shout about, the Novritsch Tactical FAST Bump Helmet is a fantastic option. This helmet replicates the real steel Bump FAST helmet, featuring ARC accessory rails on each side and an NVG mount up front, complete with a protective insert. ARC rails allow you to adapt your helmet to suit the mission at hand, part of a vast ecosystem with a wide range of customisation options.

The set includes external Velcro, which can be mounted wherever you need it, allowing you to style up your lid with morale and I.D patches. Also included is a modular pad set, allowing you to get the perfect fit, regardless of your head geometry and whether you wear a comms headset or not.

One of the best features of this helmet is its OCC adjustment dial, located on the rear of the suspension. The OCC dial provides perfect stability when cranked down, meaning if you have an action camera or other kit mounted to your lid, it won't slide around on your head during dynamic movements. If you're gearing up on the cheap, the Novritsch Tactical FAST Bump Helmet is the lid for you!

If you're looking for an affordable Airsoft helmet with plenty to shout about, the Novritsch Tactical FAST Bump Helmet is a fantastic option. This helmet replicates the real steel Bump FAST helmet, featuring ARC accessory rails on each side and an NVG mount up front, complete with a protective insert. ARC rails allow you to adapt your helmet to suit the mission at hand, part of a vast ecosystem with a wide range of customisation options.

The set includes external Velcro, which can be mounted wherever you need it, allowing you to style up your lid with morale and I.D patches. Also included is a modular pad set, allowing you to get the perfect fit, regardless of your head geometry and whether you wear a comms headset or not.

One of the best features of this helmet is its OCC adjustment dial, located on the rear of the suspension. The OCC dial provides perfect stability when cranked down, meaning if you have an action camera or other kit mounted to your lid, it won't slide around on your head during dynamic movements. If you're gearing up on the cheap, the Novritsch Tactical FAST Bump Helmet is the lid for you!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!